[Samba] Samba + CUPS

[José Eduardo S. C. Xavier]

The samba from wheezy backports is the 3.6.6, right? it is what I had
installed with sudo apt-get install samba.

2014-10-20 13:24 GMT+01:00 L.P.H. van Belle <belle at bazuin.nl>:

>  stop..
>
> Dont install samba4.
>
> Of use sernet-samba
> or use samba from wheezy backports.
>
> samba4 is the most bad version.
>
>
>
> >-----Oorspronkelijk bericht-----
> >Van: josescxavier at gmail.com
> >[mailto:samba-bounces at lists.samba.org] Namens José Eduardo S. C. Xavier
> >Verzonden: maandag 20 oktober 2014 14:22
> >Aan: Sven Schwedas
> >CC: samba at lists.samba.org
> >Onderwerp: Re: [Samba] Samba + CUPS
> >
> >I'm removing samba and install samba4 from apt-get to try if it works.
> >
> >2014-10-20 13:19 GMT+01:00 Sven Schwedas <sven.schwedas at tao.at>:
> >
> >> On 2014-10-20 14:13, José Eduardo S. C. Xavier wrote:
> >> > Hi,
> >> > I have configured a CUPS printer server with samba and it
> >worked with
> >> > Windows 7 32/64bits but now with windows 8 it can't get
> >the drivers.
> >> >
> >> > I found it https://bugzilla.samba.org/show_bug.cgi?id=9474
> >but doesn't
> >> know
> >> > how to use the patch to solve the problem. I'm using a
> >raspberry pi.
> >>
> >> By updating to a more recent Samba version, as you were
> >instructed to on
> >> the bugtracker.
> >>
> >> --
> >> Mit freundlichen Grüßen, / Best Regards,
> >> Sven Schwedas
> >> Systemadministrator
> >> TAO Beratungs- und Management GmbH | Lendplatz 45 | A - 8020 Graz
> >> Mail/XMPP: sven.schwedas at tao.at | +43 (0)680 301 7167
> >> http://software.tao.at
> >>
> >>
> >> --
> >> To unsubscribe from this list go to the following URL and read the
> >> instructions:  https://lists.samba.org/mailman/options/samba
> >>
> >--
> >To unsubscribe from this list go to the following URL and read the
> >instructions:  https://lists.samba.org/mailman/options/samba
> >
>
>