[Samba] Failover

Sandbox sandboxheh at gmail.com
Thu Mar 27 03:46:50 MDT 2014


Hi Chan,

I am using Bind 9.8.
Checked my DNS, my domainc01 server has the NS record in both domain and
_msdcs zones.

Regards, Robert


2014-03-25 14:34 GMT+01:00 Chan Min Wai <dcmwai at gmail.com>:

> Hi Sandbox,
>
> Meaning that you have a dns issue...
> Which DNS module do you use?
> Internal or bind?
>
> Anyway use your RAT from windows.
> Open DNS Administrator
> Check on the NS (name server) on your Domain Reals
>
> Check if only the DC1 is register as the NS and not DC2
> And add them in if it is missing...
>
> You will also need to check other zones like _msdc.* and etc
>
> I found this problem recently when a win2k8 join my DC..
>
> Thank You.
>
>
>
>
> On Tue, Mar 25, 2014 at 8:20 PM, Sandbox <sandboxheh at gmail.com> wrote:
>
>> Hi Chan,
>>
>> The 2 servers are AD DC's, the replication is fine between them,
>> everythings perfect except this fialover problem :)
>>
>> Regards,
>> Robert
>>
>>
>> 2014-03-25 12:53 GMT+01:00 Chan Min Wai <dcmwai at gmail.com>:
>>
>> Dear Sandbox,
>>>
>>> Can help to lay out your design?
>>>
>>> Is that 2 x AD DC?
>>> Or that is the DC member?
>>>
>>> Is the 2 AD DC replicated successfully?
>>>
>>>
>>>
>>> Thank You
>>>
>>>
>>>
>>> Regards,
>>> Chan Min Wai
>>>
>>> > Sandbox <sandboxheh at gmail.com> 於 25/03/2014 5:00 PTG 寫道:
>>> >
>>> > Hai,
>>> >
>>> > Samba 4.1.5
>>> >
>>> > I have an old problem with my failover IP/name which is
>>> > 10.48.16.155/domaincha.
>>> > The 2 servers IP address and DNS names are 10.48.16.150/domainc01 and
>>> > 10.48.16.151/domainc02.
>>> > Domaincha always points to the "active" server so when any of the
>>> servers
>>> > dies my users couldn't see anything, and also i can set up home
>>> directories
>>> > to point the failover address instead of 1 server.
>>> >
>>> > If i would like to use this name works perfectly from windows XP
>>> clients.
>>> > Windows 7 clients could list all of the shares but couldn't open them.
>>> > If i'm using the IP address instead of DNS name works perfectly.
>>> >
>>> > I added domaincha SRV records to my DNS which didn't work (do i need to
>>> > delete those records or can i use like this?).
>>> >
>>> > So do you have any idead which DNS record or any other settings need
>>> to set
>>> > up so my windows 7 clients work via DNS name?
>>> >
>>> >
>>> > Thanks, Robert
>>> > --
>>> > To unsubscribe from this list go to the following URL and read the
>>> > instructions:  https://lists.samba.org/mailman/options/samba
>>>
>>
>>
>


More information about the samba mailing list