[Samba] ctdb PARTIALLYONLINE

[steve]

On Sat, 2014-07-12 at 06:58 +1100, me at electronico.nc wrote:
> Le 12/07/2014 03:40, steve a écrit :
> > drbd ctdb ocfs2
> > Hi
> > Everything seems OK apart from the IP takeover.
> >
> > public_addresses
> > 192.168.1.80/24 enp0s3
> > 192.168.1.81/24 enp0s3
> >
> > ctdb status
> > Number of nodes:2
> > pnn:0 192.168.1.10     PARTIALLYONLINE
> > pnn:1 192.168.1.11     PARTIALLYONLINE (THIS NODE)
> > Generation:2090727463
> > Size:2
> > hash:0 lmaster:0
> > hash:1 lmaster:1
> > Recovery mode:NORMAL (0)
> > Recovery master:1
> >
> > but we are getting:
> > 2014/07/11 18:17:37.313940 [recoverd:15925]: Failed to find node to
> > cover ip 192.168.1.81
> > 2014/07/11 18:17:37.314608 [recoverd:15925]: Failed to find node to
> > cover ip 192.168.1.80
> >
> > our nodes are on the other interface, enps08:
> > 192.168.1.10
> > 192.168.1.11
> >
> > At the moment, enp0s3 have fixed IPs:
> > 192.168.1.82
> > 192.168.1.83
> >
> > Question: how do we configure the interface for the public IPs?
> > Dow we need a third interface for the public ips?
> > Cheers,
> > Steve
> >
> Hi Steve,
> Do you have 2 NICs :
> enp0s3
> enps08
> ?
> Which one is LAN ?
> Is the other one only for HA ?
> Why have you used the same subnet on the 2 NICs ?
> Nicolas

Hi
enp0s3 LAN
enp0s8 ha

We used the same subnet, otherwise, nothing showed up with ctdb ip.
(Initially we had the ha on 192.168.0.10 and 192.168.0.11)

No idea how to configure the interface for the public IPs. We'd like the
lan IPs to be on the 192.168.1.x network if possible. We're joined to
the AD domain on that subnet.

The HA nics are easy to configure with fixed IPs but how do we configure
the other card for the public IPs? ATM it's configured with fixed IP's.

Any clues most gratefully received. I'm sure we've overlooked something
simple.
Cheers,
Steve