[Samba] DNS Setup
Chan Min Wai
dcmwai at gmail.com
Wed Jan 22 04:32:39 MST 2014
Sorry to ask did samba internal dns currently support extra zone?
That should be easier than bind dns.
Thank you.
On Wed, Jan 22, 2014 at 5:48 PM, Denis Cardon <
denis.cardon at tranquil-it-systems.fr> wrote:
> Hi Zhia,
>
>>
>> in that case you should not not mail.local.lan or local.lan domain
>> use something else like
>>
>> mail.company.com
>> and define statically on this company.com domain
>>
>> Of course that site2 dc will have a similar result.
>> they are join...
>>
>> so make another static dns like
>>
>> mail.company2.com
>>
>> As for the NAT issue check on the openvpn configuration I'm not sure if
>> that is possible.
>> but it don't affect samba...
>>
>
> I think you cannot use only Samba4 internal DNS for this kind of specific
> setup. In this case I would define a zone company.com as Chan said
> directly in bind9 flat files configuration, and not integrated into AD, and
> I would keep the zone local.lan AD integrated. This way you can define the
> zone differently on the two sites in the company.com zone (or use a bind
> multiview to have a common configuration between the two sites).
>
> Cheers,
>
> Denis
>
>
>>
>>
>> On Tue, Jan 21, 2014 at 3:35 PM, Zhia Chandra <zhia.chandra at gmail.com
>> >wrote:
>>
>> hii guys
>>>
>>> i have some issue with dns in samba 4
>>>
>>> i have install and setup 2 samba dc in different Site
>>> site2 dc joint to site1 dc, with internal dns
>>> topology :
>>>
>>> site1 --- openvpn server --- firewall --- wan --- openvpn client ---
>>> site2
>>> 192.168.1.0/24
>>> 192.168.2.0/24
>>>
>>> in site1 i have some application let say
>>> email server: mail.local.lan > 192.168.1.2
>>> web server : web.local.lan > 192.168.1.3
>>>
>>> my issue is, dont want any site2-client access site1 directly to server
>>> in
>>> site1
>>> i want site2-client access viat NAT form site1-firewall
>>> and i have issue with setting dns data in domain controller
>>> if i set in dc dns mail.local.lan > 192.168.1.2, site2-client will have
>>> same ip address for mail.local.lan , is there any way to change the ip of
>>> mail.local.lan in site2-dc only effect in site2 ?
>>>
>>>
>>>
>>>
>>> --
>>>
>>> Thx & Warm regards
>>> Zhia Chandra
>>> --
>>> To unsubscribe from this list go to the following URL and read the
>>> instructions: https://lists.samba.org/mailman/options/samba
>>>
>>>
>
> --
> Denis Cardon
> Tranquil IT Systems
> Les Espaces Jules Verne, bâtiment A
> 12 avenue Jules Verne
> 44230 Saint Sébastien sur Loire
> tel : +33 (0) 2.40.97.57.55
> http://www.tranquil-it-systems.fr
>
>
More information about the samba
mailing list