[Samba] Use Samba with ACL for read Active Directory and set Permissions via it.
Jason Long
hack3rcon at yahoo.com
Sun Dec 28 04:54:48 MST 2014
Thank you so much.
I changed "SAMDOM" to "jasondomain" and also "winbind use default domain = no" but problem exist. int he photo that I sent, I changed "WORKGROUP" to "jasondomain" too.
I have a question, My domain have a prefix with ".jj" and it is "jasondomain.jj". I changed :
[global]
workgroup = JASONDOMAIN.JJ
server string = Samba Server Version %v
# logs split per machine
log file = /var/log/samba/log.%m
# max 50KB per log file, then rotate
max log size = 50
security = ads
passdb backend = tdbsam
load printers = yes
cups options = raw
idmap config *:backend = tdb
idmap config *:range = 70001-80000
#idmap config SAMDOM:backend = ad
idmap config JASONDOMAIN.JJ:backend = ad
idmap config JASONDOMAIN.JJ:schema_mode = rfc2307
idmap config JASONDOMAIN.JJ:range = 500-40000
Am I right? If yes, My problem not solved :(
about your question I must say that "No", I have not any "jason" user in Linux machine.
Yes, I use "jasondomain\jason" for login into Linux machine and "jason" is a user that defined in Windows Active Directory.
Thanks.
On Sunday, December 28, 2014 1:41 AM, Rowland Penny <rowlandpenny at googlemail.com> wrote:
On 28/12/14 08:47, Jason Long wrote:
> I never used four different Workgroup or Domain. My domain is
> "jasondomain" and as you see my last "smb.conf" it is. I change
> "MYGROUP" to "jasondomain" but problem not solved.
>
>
> On Saturday, December 27, 2014 7:02 AM, Rowland Penny
> <rowlandpenny at googlemail.com> wrote:
>
>
> On 27/12/14 14:18, Jason Long wrote:
> > Thank you so much.
> > I changed my "smb.conf" and "password-auth-ac". I attached two file
> > for you and you can see them. My problem not solved :( and login
> > windows showed and not accept my username and password, I attached
> it too.
> > I paste my "fstab" file here and as you see the "acl" is enabled for
> > "root" :
> >
> > #
> > # /etc/fstab
> > # Created by anaconda on Wed Dec 24 10:02:57 2014
> > #
> > # Accessible filesystems, by reference, are maintained under '/dev/disk'
> > # See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more
> > info
> > #
> > /dev/mapper/vg_print-lv_root / ext4 acl,defaults 1 1
> > UUID=9ad25e0f-4f1a-4c6a-a419-98a016fcc30d /boot ext4
> > defaults 1 2
> > /dev/mapper/vg_print-lv_swap swap swap defaults 0 0
> > tmpfs /dev/shm tmpfs defaults
> > 0 0
> > devpts /dev/pts devpts gid=5,mode=620 0 0
> > sysfs /sys sysfs defaults
> > 0 0
> > proc /proc proc defaults
> > 0 0
> >
> > I paste "getfacl" for test directory here :
> >
> > getfacl test/
> > # file: test/
> > # owner: jasondomain\134jason
> > # group: jasondomain\134grp-jason-rw
> > user::rwx
> > group::r-x
> > group:jasondomain\134grp-jason-rw:rwx
> > mask::rwx
> > other::r-x
> >
> > After change "password-auth-ac", When I want to restart "winbind"
> > server it show me an error as below :
> >
> > #service smb restart
> > Shutting down SMB services: [ OK ]
> > Starting SMB services: [ OK ]
> > # service winbind restart
> > Shutting down Winbind services: [FAILED]
> > Starting Winbind services: [ OK ]
> >
> >
> > In your opinion what is the problem?
> >
> >
> >
> > On Saturday, December 27, 2014 4:12 AM, Rowland Penny
> > <rowlandpenny at googlemail.com <mailto:rowlandpenny at googlemail.com>>
> wrote:
> >
> >
> > On 27/12/14 11:55, Jason Long wrote:
> >> You right. I joined my Linux box into Windows domain.
> >> Of course. I attached my "smb.conf". Can you see it?
> >>
> >>
> >> On Saturday, December 27, 2014 3:36 AM, Rowland Penny
> >> <rowlandpenny at googlemail.com <mailto:rowlandpenny at googlemail.com>>
> <mailto:rowlandpenny at googlemail.com
> <mailto:rowlandpenny at googlemail.com>> wrote:
> >>
> >>
> >> On 27/12/14 06:44, Jason Long wrote:
> >>
> >> > Thank you so much.
> >> > No, I'm not. I joined my linux to Windows domain because of AD. I
> >> can define some users in my Linux and Windows clients use it to open
> >> share and ... but my problem is that I have a lot of users and groups
> >> and Redefine all of them in Linux is a little silly :(. I joined my
> >> Linux to Windows domain because of use AD users and groups.
> >> >
> >> > About your question :
> >> > "Where did you setup the password for 'jasondomain\jason'? Again,
> >> if you
> >> > didn't set a password, more modern versions of windows won't allow
> >> you to
> >> > login (or attach a share) remotely."
> >> >
> >> > I must say that "jason" is defined in AD on Windows OS and I use it
> >> for login into Linux.
> >> >
> >> >
> >> > "You don't say what happens when you try to open 'test'. You say
> >> it can't let you? What error message does it give you? "
> >> > It don't show me any error and just show Login Windows again :(.
> >> >
> >> >
> >> >
> >> >
> >> > On Friday, December 26, 2014 2:35 PM, Linda W <samba at tlinx.org
> <mailto:samba at tlinx.org>
> >> <mailto:samba at tlinx.org <mailto:samba at tlinx.org>>> wrote:
> >> > Jason Long wrote:
> >> >> Hello Folks.
> >> >> How are you?
> >> >>
> >> >> I joined my CentOS into Windows Domain and I want to give
> >> Permission to files and Directory via Active Directory. When I use
> >> "getent passwd" and "getent group", I can see All AD users and
> >> Groups. I use below command to give Permission to a Folder via ACL :
> >> >>
> >> >> setfacl -m g:"jasondomain\jason-rw":rwx
> >> /home/local/jasondomain/jason/test
> >> >>
> >> >> and I create a part for my "smb.conf" file :
> >> >>
> >> >> [Test]
> >> >> comment = test
> >> >> path = /home/local/jasondomain/jason/test
> >> >> browsable = yes
> >> >> inherit acls = yes
> >> >> inherit permissions = yes
> >> >> inherit owner = yes
> >> >> map acl inherit = yes
> >> >> acl check permissions = yes
> >> >> nt acl support = yes
> >> >> #valid users = %D\%S
> >> >> #write list = @jasondomain\domain^admins
> >> >> read only = no
> >> >>
> >> >>
> >> >> but when I browse the "Test" directory it ask me username and
> >> password and when I enter "jasondomain\jason" as username it can't
> >> let me to open the "Test" directory. What is the problem?
> >> >>
> >> > ----
> >> > Are you already logged into the server under different
> >> credentials,
> >> > like 'WORKGROUP', jason (i.e. do you already have some shares
> mounted?)
> >> >
> >> > If I remember, Windows won't allow the same workstation to connect
> >> under
> >> > two different user id's. If you already have something mounted
> >> from your
> >> > workstation with different credentials, you need to close (unmount
> >> / unmap)
> >> > those other connections.
> >> >
> >> > Where did you setup the password for 'jasondomain\jason'? Again,
> if you
> >> > didn't set a password, more modern versions of windows won't allow
> >> you to
> >> > login (or attach a share) remotely.
> >> >
> >> > You don't say what happens when you try to open 'test'. You say it
> >> >
> >> > can't let
> >> > you? What error message does it give you?
> >>
> >>
> >> OK, If I understand you correctly, you have setup samba on a Centos
> >> machine and joined it to a windows machine, is this correct ?
> >>
> >> Could you post the entire smb.conf from your Centos machine.
> >>
> >> Rowland
> >>
> >> --
> >> To unsubscribe from this list go to the following URL and read the
> >> instructions: https://lists.samba.org/mailman/options/samba
> >>
> >>
> >>
> > OK, after wading through all the un-needed lines, I got this:
> >
> > [global]
> > workgroup = MYGROUP
> > server string = Samba Server Version %v
> > # logs split per machine
> > log file = /var/log/samba/log.%m
> > # max 50KB per log file, then rotate
> > max log size = 50
> > security = user
> > passdb backend = tdbsam
> > load printers = yes
> > cups options = raw
> >
> > [homes]
> > comment = Home Directories
> > browseable = no
> > writable = yes
> >
> > [printers]
> > comment = All Printers
> > path = /var/spool/samba
> > browseable = no
> > guest ok = no
> > writable = no
> > printable = yes
> >
> > [Test]
> > comment = Public Stuff
> > path = /home/local/HAMSHAHRY/jokar/test/
> > browsable = yes
> > inherit acls = yes
> > inherit permissions = yes
> > inherit owner = yes
> > map acl inherit = yes
> > acl check permissions = yes
> > nt acl support = yes
> > read only = no
> >
> > Try changing 'security = user' to 'security = ads' and adding the
> > required winbind & idmap lines, see:
> > https://wiki.samba.org/index.php/Setup_a_Samba_AD_Member_Server
> >
> > Yes, I know it says 'member server', but you can use it for a client
> > as well.
> >
> > Rowland
> >
> >
> >
>
> Hi, you seem to be using **four**, yes four different workgroup (also
> known as domain) names:
> In smb.conf: MYGROUP & SAMDOM
> When trying to login: jasondomain & WORKGROUP
>
> They all need to be the same, you also need to add uidNumber's to your
> users and a gidNumber to at least 'Domain Users'
>
>
> Rowland
>
>
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba
>
>
OK, in the last smb.conf you posted there are these lines:
workgroup = MYGROUP
idmap config SAMDOM:backend = ad
idmap config SAMDOM:schema_mode = rfc2307
idmap config SAMDOM:range = 500-40000
Also in samba-1.png:
Username: jasondomain\jason
domain: WORKGROUP
I make that 4 workgroup names, ok you have changed MYGROUP, but what
about SAMDOM ?
You also have 'winbind use default domain = yes' , because of this, you
do not need to use 'jasondomain\jason', just 'jason' should work.
Do you by any chance have a Unix user called 'jason' on the samba machine ?
Also, when you try to login as 'jasondomain\jason' are you doing this on
the samba machine ?
Rowland
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
More information about the samba
mailing list