[Samba] Error0x00000006 with Point'n'Print Client Drivers

[L.P.H. van Belle]

dont know... 

I have the HP universal 5.8 driver (32bit and 64bit) installed without any problem. 
but i used the HP tool to set some basic settings and to set the driver to old behaivor. 
ow.. i first did setup the 32bit before the 64bit.. 

in my setup, i have used the print server tool from RATS the install the drivers.
and i assigned them to the needed printer(s) 

i have a dedicated folder for samba drivers and spool and before installing them 
i did set Privileges on the "Domain Admins"  and administrator was used to install them. 

basicly, first setup the server folder, rights, share rights.
all done.. then install the printer driver.

( Debian with sernet samba 4.1.6 ) 

Greetz, 

Louis

>-----Oorspronkelijk bericht-----
>Van: MJ at edv.Jaenichen.biz 
>[mailto:samba-bounces at lists.samba.org] Namens Matthias Jaenichen
>Verzonden: woensdag 16 april 2014 18:04
>Aan: samba at lists.samba.org
>Onderwerp: Re: [Samba] Error0x00000006 with Point'n'Print 
>Client Drivers
>
>So what's next?
>
>Am 15.04.2014 09:19, schrieb Matthias Jänichen:
>> Am 14.04.2014 19:22, schrieb Marc Muehlfeld:
>>> I haven't heard from the OP, if he filed a bug. If not, can you do
>>> that? And please include a level 10 debug log, exact driver name and
>>> version, etc.
>> Done: https://bugzilla.samba.org/show_bug.cgi?id=10553
>>> You can try an older version of the driver. I had an issue with some
>>> HP drivers some years ago. But older versions worked. 
>Something in the
>>> newer ones was incompatible with Samba at that time.
>> please doublecheck my setup first. The 5.3-drivers do not 
>cover latest
>> printers...
>>> BTW: upload for x64 drivers only works, if you specify 
>below in smb.conf
>>>> [global]
>>>>      spoolss: architecture = Windows x64
>>> That's expected.
>>> 
>https://wiki.samba.org/index.php/Samba_as_a_print_server#An_upl
>oaded_driver_is_not_shown_in_the_list.2C_when_trying_to_associa
>te_it_with_a_printer
>>>   
>> sure, it was just mentioned in the original thread that x64 
>drivers did
>> not show up. So I wanted to remind about it (future reference).
>>
>
>
>-- 
>Matthias Jänichen
>--
>Jänichen EDV-Beratung
>Pappelweg 28
>22949 Ammersbek
>Tel: +49/4102/32126
>Fax: +49/4102/30565
>Mob: +49/177/2423511
>
>-- 
>To unsubscribe from this list go to the following URL and read the
>instructions:  https://lists.samba.org/mailman/options/samba
>