[Samba] problem with adding printers to samba4 [solved]

[Andrew Martin]

----- Original Message -----
> From: "Chantal Rosmuller" <chantal at antenna.nl>
> To: samba at lists.samba.org
> Sent: Thursday, February 28, 2013 7:53:44 AM
> Subject: Re: [Samba] problem with adding printers to samba4 [solved]
> 
> I solved it myself, the rpm I installed was not compiled with cups
> support
> 
> On 02/27/2013 02:56 PM, Chantal Rosmuller wrote:
> > Hi,
> >
> > I have a problem setting up shared printers in samba4, I used the
> > manual in
> >
> > https://wiki.samba.org/index.php/Samba_AD_DC_HOWTO#Step_13:_Setup_a_Printer_share
> >
> >
> > - I added a printer using cups
> > - I added the printer en printer driver share as written in the
> > wiki
> > - I logged on as samba 4 administrator on a windows 7 client
> > - I tried to add the printer
> >
> > On windows I get "acces denied" on the samba4 server in
> > /var/log/samab4/log/smbd I get:
> >
> > Add printer for printer Ricoh Aficio MP 4000 PCL6 called and no
> > smb.conf parameter "addprinter command" is defined. This parameter
> > must exist for this call to succeed
> >
> > I thought the addprinter command was not available anymore for
> > samba4?
> >
> > The server is a CentOS release 6.3
> > sama version: samba4-4.0.1
> >
> > smb.conf:
> >
> >
> > # Global parameters
> > [global]
> >     workgroup =DOMAIN
> >     realm = domain.nl
> >     netbios name = PUPPETDEV01
> >     server role = active directory domain controller
> >     dns forwarder = 172.19.1.12
> >
> > [netlogon]
> >     path = /var/lib/samba4/sysvol//domain.nl/scripts
> >     read only = No
> >
> > [sysvol]
> >     path = /var/lib/samba4/sysvol/
> >     read only = No
> >
> > [printers]
> >     comment = All Printers
> >     path = /var/lib/samba4/spool
> >     browseable = Yes
> >     read only = No
> >     printable = Yes
> >
> > [print$]
> >     comment = Point and Print Printer Drivers
> >     path = /var/lib/samba4/print
> >     read only = No
> >
> >
> 
Chantal,

Can you elaborate a bit on how you have integrated CUPS into your
samba4 environment? I have configured a samba4 DC and set up a separate
CUPS server with samba3 to export the printer share. In samba4, where/how
do you set up the printers? Is there a way to push them out to domain
computers using Group Policy?

Thanks,

Andrew