[Samba] Samba4 fails to work following upgrade - library version errors

[Graeme Porter]

Hi Ricky,

Thanks for replying.

The original build was just run with the arguments on the HOWTO:

    ./configure --enable-debug --enable-selftest

With the latest build, I thought I'd try adding Avahi on there as a means of "announcing" the Pi to domain members; as I understand it, Samba4 currently has no means of appearing under the "Network Neighborhood", but previous versions did, and that Avahi is capable of providing that.  I'd forgotten about adding Avahi in until your reply, oops  :(


The same arguments I previously used were still part of the ./configure command I ran - i.e. I didn't remove either of them:

    ./configure --enable-avahi --enable-debug --enable-selftest

Could adding this have caused the problem?

Kind regards,
Graeme



________________________________
 From: Ricky Nance <ricky.nance at weaubleau.k12.mo.us>
To: Graeme Porter <graeme.porter at yahoo.co.uk> 
Cc: "samba at lists.samba.org" <samba at lists.samba.org> 
Sent: Wednesday, 3 April 2013, 17:21
Subject: Re: [Samba] Samba4 fails to work following upgrade - library version errors
 

The last time you did ./configure, did you specify any arguments, if so, you will need the same arguments on this install. Also, I typically start 'fresh' by issuing a git clean -x -f -d after git pull and before ./configure. 

Ricky



On Wed, Apr 3, 2013 at 11:06 AM, Graeme Porter <graeme.porter at yahoo.co.uk> wrote:

Hello,
>
>I was running Samba4 for a while on my Raspberry Pi (Raspbian distro, running 3.6.11+ #371 PREEMPT armv6l kernel).  The version of Samba I was running was 4.1.0pre1-GIT-fd8b258.
>
>Last night I decided to try to upgrade to see if I could upgrade it without breaking it.
>
>
>Note that the AD this Pi is the DC for doesn't have any physical clients as members; I was using a Virtual PC running WinXP and another running Ubuntu just to test it out - so technically there's no great loss if it did break - but I do want to start using the Pi as a DC for my physical Windows clients (my family's 3x computers - one Vista, one Win7, and one Win8), and I wanted to ensure I could upgrade it cleanly without loss of service first.
>
>
>So I used "git pull" to download the latest changes, as described in the Samba4 HOWTO guide.  The configure, make, and make install stages went without a hitch (although the little Pi doesn't exactly blast through the compile, so it took several long hours).  As a just-in-case, I even stopped Samba from running before I ran "make install" just in case the script couldn't overwrite a file that was in use.
>
>So I tried to check which version this had upgraded to by running samba -V:
>
>root at raspberrypi:/usr/local/samba4# samba -V
>samba: /usr/local/samba/lib/private/libcliauth.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libauth4.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libevents.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libcluster.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libprocess_model.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libsamdb-common.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required
> by samba)
>samba: /usr/local/samba/lib/private/libsamba-modules.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libndr-samba4.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/liberrors.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libservice.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libldbsamba.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libMESSAGING.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libntvfs.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>
>... huh.
>
>I hoped that maybe it was just the version argument that stopped working - so I tried to start up the samba daemon (rather than using the "service samba4 start" command I had used previously without fail, as this script suppresses command line output):
>
>root at raspberrypi:/usr/local/samba4# samba
>samba: /usr/local/samba/lib/private/libcliauth.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libauth4.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libevents.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libcluster.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libprocess_model.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libsamdb-common.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba:
> /usr/local/samba/lib/private/libsamba-modules.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libndr-samba4.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/liberrors.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libservice.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libldbsamba.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libMESSAGING.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>samba: /usr/local/samba/lib/private/libntvfs.so: version `SAMBA_4.1.0PRE1_GIT_FD8B258' not found (required by samba)
>
>... and a quick check of "ps -A | grep samba" confirms that it is indeed not running.
>
>I checked that all of the above files actually do exist at the given paths:
>
>root at raspberrypi:/usr/local/samba4# ls -al /usr/local/samba/lib/private/libcliauth.so
>-rwxr-xr-x 1 root staff 157540 Apr  3 08:21 /usr/local/samba/lib/private/libcliauth.so
>root at raspberrypi:/usr/local/samba4# ls -al /usr/local/samba/lib/private/libauth4.so
>-rwxr-xr-x 1 root staff 200714 Apr  3 08:40 /usr/local/samba/lib/private/libauth4.so
>root at raspberrypi:/usr/local/samba4# ls -al /usr/local/samba/lib/private/libevents.so
>-rwxr-xr-x 1 root staff 6858 Apr  3 08:18 /usr/local/samba/lib/private/libevents.so
>root at raspberrypi:/usr/local/samba4# ls -al /usr/local/samba/lib/private/libcluster.so
>-rwxr-xr-x 1 root staff 14230 Apr  3 08:19 /usr/local/samba/lib/private/libcluster.so
>root at raspberrypi:/usr/local/samba4# ls -al /usr/local/samba/lib/private/libprocess_model.so
>-rwxr-xr-x 1 root staff 21163 Apr  3 08:20
> /usr/local/samba/lib/private/libprocess_model.so
>root at raspberrypi:/usr/local/samba4# ls -al /usr/local/samba/lib/private/libsamdb-common.so
>-rwxr-xr-x 1 root staff 222416 Apr  3 08:21 /usr/local/samba/lib/private/libsamdb-common.so
>root at raspberrypi:/usr/local/samba4# ls -al /usr/local/samba/lib/private/libsamba-modules.so
>-rwxr-xr-x 1 root staff 15430 Apr  3 08:19 /usr/local/samba/lib/private/libsamba-modules.so
>root at raspberrypi:/usr/local/samba4# ls -al /usr/local/samba/lib/private/libndr-samba4.so
>-rwxr-xr-x 1 root staff 2565327 Apr  3 08:21 /usr/local/samba/lib/private/libndr-samba4.so
>root at raspberrypi:/usr/local/samba4# ls -al /usr/local/samba/lib/private/liberrors.so
>-rwxr-xr-x 1 root staff 406455 Apr  3 08:19 /usr/local/samba/lib/private/liberrors.so
>root at raspberrypi:/usr/local/samba4# ls -al /usr/local/samba/lib/private/libservice.so
>-rwxr-xr-x 1 root staff 73408 Apr  3 08:40
> /usr/local/samba/lib/private/libservice.so
>root at raspberrypi:/usr/local/samba4# ls -al /usr/local/samba/lib/private/libldbsamba.so
>-rwxr-xr-x 1 root staff 367089 Apr  3 08:22 /usr/local/samba/lib/private/libldbsamba.so
>root at raspberrypi:/usr/local/samba4# ls -al /usr/local/samba/lib/private/libMESSAGING.so
>-rwxr-xr-x 1 root staff 71125 Apr  3 08:27 /usr/local/samba/lib/private/libMESSAGING.so
>root at raspberrypi:/usr/local/samba4# ls -al /usr/local/samba/lib/private/libntvfs.so
>-rwxr-xr-x 1 root staff 2366899 Apr  3 08:39 /usr/local/samba/lib/private/libntvfs.so
>
>
>The smbclient command also fails with the same issue, so I can't even connect to other PCs.
>
>
>I got the Pi primarily to learn Linux as I am not an experienced Linux user (Windows and Cisco IOS guy here) - I have no idea how to check what version each of these files actually is - so I'm not really sure what to try out next.
>
>Can anyone give me any pointers?  It'd be nice to get this back up and running.
>
>Kind regards
>Graeme Porter
>--
>To unsubscribe from this list go to the following URL and read the
>instructions:  https://lists.samba.org/mailman/options/samba
>


--