[Samba] samba3upgrade fail + leaking memory

[Ulrich Schinz]

Hello,

same strange error here (used classicupgrade).

I tried Debian Wheezy amd64 and Debian Squeeze amd64. In both cases i 
get PANIC: No talloc stackframe.

After googling around I found one solution, which worked for me last 
week: run configure without --enable-developer and run it instead with 
--enable-dbug. But since tuesday i tried a complete new setup. Compiling 
runs without errors, but a classicupgrade is not working: PANIC: No 
talloc stackframe

Maybe someone can give some hints, or fix this in source...

regards
uli

Am 21.08.2012 16:08, schrieb Hervé Hénoch:
> Hello
>
> smbd -V give me : 4.0beta7-GIT-a817959,
> uname -a give : Linux 3.2.0-2-686-pae #1 SMP
> cat /etc/issue give  : Debian GNU Linux wheezy/sid
>
> "configure.developper  --with-lapd --enable-debug", "make" and "make 
> install" are all ok. But the following command :
>
> /usr/local/samba/bin/samba-tool domain samba3upgrade  
> --dbdir=/root/samba3/samba/  --use-xattrs=yes --realm=sc.isc84.org 
> /root/samba3/etc/smb.conf
>
> give :
>
> >no talloc stack frame at ../source3/param/loadparm.c:2787, leaking 
> memory
> >PANIC: No talloc stackframe
> >abandon
>
> Any idea ?
>
> Thank
>
>