[Samba] Fw: PDC/wins on multiple networks
Gala Dragos
gala_dragos at yahoo.com
Fri Mar 25 11:32:31 MDT 2011
Hi,
The pc that runs the samba server is my own property, it also dubs as router and dhcp server. I assign WINS server to the clients by dhcp using dnsmasq. I do not need or want to setup a domain. I just want to share files between the two networks using windows neighborhood and a workgroup, just like the clients would have been connected in the same network.
I have deleted the "remote anounce" thingy but the error is the same: "The network path could not be found"
Maybe something has to do with the firewall? can you tell me which ports to open and their direction ?
----------------------------------------------------------------------------------------------------------------------------------
. Microsoft broke the Volkswagen world record: Volkswagen only made 22 million bugs!
. It is time for us to stand and cheer for the doer, the achiever, the one who recognizes the challenge and does something about it.
-Vince Lombardi
. Everybody can learn how to make kids, but not everyone can raise them right!
________________________________
From: Daniel Müller <mueller at tropenklinik.de>
To: Gala Dragos <gala_dragos at yahoo.com>
Cc: samba list <samba at lists.samba.org>
Sent: Thursday, March 24, 2011 11:24 PM
Subject: Re: [Samba] PDC/wins on multiple networks
Hi,
you have a (Samba)domain server and it is your wins?
You just to have an entry in your win xp clients wins-server:
YourSambaWinsServer.Enable Netbios over TCP
.
That is all. No: remote announce = 192.168.5.255/WORKGROUP
192.168.7.255/WORKGROUP
This is working for me with 3 subnets.
On Thu, 24 Mar 2011 13:25:41 -0700 (PDT), Gala Dragos
<gala_dragos at yahoo.com> wrote:
> Hi to everyone on the mailing list.
>
> I have two networks at home, apart from the internet. One is the wired
> network, LAN, and the other is the wireless network, WLAN. They need to
> be separated, not bridged, because of hardware issues.
>
> I am trying to setup inter-networking browsing on these networks, pc's
on
> LAN should see and browse pc's on WLAN
and viceversa.
>
> After reading the manual I have enabled wins server master and wins
proxy
> in samba configuration. However I can only see the pc's from the other
> network, but I cannot
> browse them, windows returns an error like "network path could not be
> found".
>
> The samba server runs on my router box, together with the firewall
> (managed through shorewall) and dnsmasq for dhcp/dns.
>
>
> Below is my global smb.conf part.
>
> [global]
> server
> string = Samba Server
> interfaces = eth1, lo, wlan0
> bind interfaces only = Yes
> security = SHARE
> log file = /var/log/samba/%m.log
>
max log size = 50
> announce as = NT Workstation
> os level = 99
> lm interval = 10
> preferred master = Yes
> domain master = Yes
> wins proxy = Yes
> wins support = Yes
> remote announce = 192.168.5.255/WORKGROUP
> 192.168.7.255/WORKGROUP
> create mask = 0666
> case sensitive = No
> preserve case = No
> short preserve
case = No
> hide special files = Yes
> map hidden = Yes
> store dos attributes = Yes
> Thanks.
>
>
>
----------------------------------------------------------------------------------------------------------------------------------
>
>
> . Microsoft broke the Volkswagen world record: Volkswagen only made 22
> million bugs!
>
>
> . It is time for us to stand and cheer for the doer, the achiever, the
> one who recognizes the challenge and does something about it.
> -Vince Lombardi
>
>
> . Everybody can learn how to make kids, but not everyone can raise them
> right!
More information about the samba
mailing list