[Samba] confusion and problem with Samba v3.3.8 as PDC with ldapsam backend
Gaiseric Vandal
gaiseric.vandal at gmail.com
Tue Jan 18 15:03:05 MST 2011
I use idmap backend to support domain trusts. I have a OU in ldap
for unix uid (or gid) to samba sid mappings for each trusted domain.
I also have an ou for "alloc" which is where the next available uid and
gid params are supported. Each of these required LDAP account and
password being specifically set. I don't know if this applies to
idmap used for in your case. I think the idmap stuff is handled by
winbind not smbd, but not sure.
Try temporarily disabling all the winbind/idmap stuff and see if you
can get it started.
On 01/18/2011 04:08 PM, Jon Detert wrote:
> On Tue, Jan 18, 2011 at 2:35 PM, Gaiseric Vandal
> <gaiseric.vandal at gmail.com> wrote:
>
>> Nt- I don't use the "ldapsam:editposix" option myself, if I understand it correctly it means you don't have to precreate the underlying unix accounts.
>>
>
> That is my understanding as well. I've never used it before, however.
>
>
>
>> However, I believe you still need to do the following
>>
>> Create a samba Administrator account
>> Create samba Domain Admins and Domain Users groups.
>> Explicitly specify the uid or username for the "guest" user.
>> Set ldap password for the idmap backend (net idmap secret thedomain xxxx )
>>
>
> the log messages tend to support this belief.
>
>
>
>> "smbpasswd -w" sets the ldap password samba to access ldap for users and groups.
>> But idmap needs the ldap password set as well eg.
>>
>
> I don't understand that. There is no separate idmap process, afaik.
> Why can't the 'idmap' functionality get the same ldap credentials that
> smbd and winbindd evidently get from the smb.conf and the secrets.tdb
> files?
>
>
>
>> net idmap secret MYDOMAIN xxxx
>> net idmap secret alloc xxxx
>>
>
> In any case, I tried the above, and got the same error for both command :
>
> "The only currently supported backend is LDAP"
>
> My smb.conf has a line expressly saying "idmap backend =
> ldap:ldap://localhost". Does smbd have to be running before running
> the 'net idmap' commands? If so, I'm screwed, cuz now that I fixed
> the 'out=IDmap' typo, smbd dies immediately after trying to start it.
>
> Ideas?
>
> Thanks,
>
> Jon
>
>
>> I don't know if when using the "ldapsam:editposix" option you can use smbpasswd to create the user accounts. Also, I used "net groupmap add...." to create the mappings between the samba Domain Admins group and the unix group by the same name.
>>
>>
>> If it were me, I would also create local unix groups for "Domain Admins" (e.g. with gid 512), "Domain Users" etc and then use "net groupmap" to map the unix gids to the Windows well known id's.
>>
>>
>> net groupmap add ntgroup="Domain Admins" unixgroup=512 rid=512 type=domain
>> net groupmap add ntgroup="Domain Users" unixgroup=513 rid=513 type=domain
>> net groupmap add ntgroup="Domain Guests" unixgroup=514 rid=514 type=domain
>> net groupmap add ntgroup="Domain Computers" unixgroup=515 rid=515 type=domain
>> net groupmap add ntgroup="Domain Controllers" unixgroup=516 rid=516 type=domain
>>
>>
>> I would create a unix "Administrator" user in the "Domain Admins" group then use smbpasswd to create the samba Administrator account.
>>
>> I use Apache Directory Studio for browsing and editing ldap entries. You may find having a GUI ldap browser and editor really useful. You should be able to tell if your LDAP groups have unix gids and samba sids.
>>
>> This way you can get basic functionality working, then you can start troubleshooting windbind and idmap .
>>
>>
>>
>>
>> On 01/18/2011 03:04 PM, Jon Detert wrote:
>>
>>> Hello,
>>>
>>> I'm trying to use samba v3.3.8 on Centos 5.5 to act as a PDC, using ldap as
>>> the backend for users, groups, and computers. The ldap I'm using is Centos
>>> Directory Server v8.1.
>>>
>>> The setting is a new, never used before, installation of samba and ldap.
>>> There are no users other than what exists by default after a Centos
>>> install. The smb.conf contains what is my best guess for the desired goal.
>>>
>>> The problem at the moment (besides having to guess at what to put in
>>> smb.conf - see below) is that smbd exits about 2 minutes after I start it.
>>> Here are what I think are the relevant bits from the log.smbd:
>>>
>>> [2011/01/18 13:40:42, 2] lib/smbldap_util.c:smbldap_search_domain_info(277)
>>> smbldap_search_domain_info: Searching
>>> for:[(&(objectClass=sambaDomain)(sambaDomainName=CHI))]
>>> [2011/01/18 13:40:42, 2] lib/smbldap.c:smbldap_open_connection(856)
>>> smbldap_open_connection: connection opened
>>> [2011/01/18 13:40:42, 3] lib/smbldap.c:smbldap_connect_system(1067)
>>> ldap_connect_system: successful connection to the LDAP server
>>> [2011/01/18 13:40:42, 4] lib/smbldap.c:smbldap_open(1143)
>>> The LDAP server is successfully connected
>>> [2011/01/18 13:41:12, 4] passdb/pdb_ldap.c:ldapsam_getsampwnam(1519)
>>> ldapsam_getsampwnam: Unable to locate user [root] count=0
>>> [2011/01/18 13:41:42, 4] passdb/pdb_ldap.c:ldapsam_getgroup(2481)
>>> ldapsam_getgroup: Did not find group, filter was
>>> (&(objectClass=sambaGroupMapping)(gidNumber=0))
>>> [2011/01/18 13:42:12, 4] passdb/pdb_ldap.c:ldapsam_getgroup(2481)
>>> ldapsam_getgroup: Did not find group, filter was
>>> (&(objectClass=sambaGroupMapping)(sambaSID=S-1-5-32-544))
>>> [2011/01/18 13:42:27, 3] groupdb/mapping.c:pdb_create_builtin_alias(786)
>>> pdb_create_builtin_alias: Could not get a gid out of winbind
>>> [2011/01/18 13:42:27, 2] auth/token_util.c:create_local_nt_token(450)
>>> WARNING: Failed to create BUILTIN\Administrators group! Can Winbind
>>> allocate gids?
>>> [2011/01/18 13:42:57, 4] passdb/pdb_ldap.c:ldapsam_getgroup(2481)
>>> ldapsam_getgroup: Did not find group, filter was
>>> (&(objectClass=sambaGroupMapping)(sambaSID=S-1-5-32-545))
>>> [2011/01/18 13:43:12, 1]
>>> passdb/pdb_ldap.c:ldapsam_enum_group_memberships(2871)
>>> User account [nobody] not found!
>>> [2011/01/18 13:43:12, 0] smbd/server.c:main(1404)
>>> ERROR: failed to setup guest info.
>>>
>>> winbind is running. log.winbindd contains nothing useful to me.
>>> log.winbindd-idmap contains lines suggesting it can't bind to the ldap
>>> server:
>>>
>>> 2011/01/18 13:42:41, 2] lib/smbldap.c:smbldap_connect_system(1052)
>>> failed to bind to server ldap://localhost with dn="uid=samba,ou=Special
>>> Users,
>>> dc=infinityhealthcare,dc=com" Error: Invalid credentials
>>>
>>> and
>>>
>>> [2011/01/18 13:42:49, 1] lib/smbldap.c:another_ldap_try(1231)
>>> Connection to LDAP server failed for the 8 try!
>>>
>>> Why doesn't the smbd log say something equivalent? In fact, it suggests the
>>> opposite, saying that "The LDAP server is successfully connected".
>>>
>>> I did set the samba admin dn's password with the command "smbpasswd -W"
>>> before starting either winbindd or smbd, and also verified that it is
>>> correct using the command "ldapsearch -x -h localhost -s sub -b
>>> ou=people,dc=infinityhealthcare,dc=com -D"uid=samba,ou=Special
>>> Users,dc=infinityhealthcare,dc=com" -W".
>>>
>>> Any ideas or suggestions?
>>>
>>> Thanks,
>>>
>>> Jon
>>>
>>>
>>>
>>>
>>>
>>> The rest of this email is my smb.conf:
>>> =============================
>>> [global]
>>>
>>> workgroup = CHI
>>> server string = Samba Server Version %v
>>>
>>> netbios name = SAMBAPDC
>>>
>>> log file = /var/log/samba/log.%m
>>> log level = 4
>>> max log size = 50
>>>
>>> security = user
>>> passdb backend = ldapsam:ldap://localhost
>>>
>>> domain master = yes
>>> preferred master = yes
>>> domain logons = yes
>>> logon drive = N:
>>> logon path = \\%L\Profiles\%u
>>>
>>> logon script = %u.bat
>>>
>>> ldap admin dn = "uid=samba,ou=Special
>>> Users,dc=infinityhealthcare,dc=com"
>>> ldap user suffix = ou=People
>>> ldap group suffix = ou=Groups
>>> ldap idmap suffix = out=IDmap
>>> ldap machine suffix = ou=Computers
>>> ldap suffix = dc=infinityhealthcare,dc=com
>>> ldap delete dn = no
>>> ldapsam:trusted = yes
>>> ldapsam:editposix = yes
>>> ldap ssl = off
>>> idmap backend = ldap:ldap://localhost
>>> idmap uid = 5000-50000
>>> idmap gid = 5000-50000
>>> winbind enum groups = yes
>>> winbind nested groups = yes
>>> template shell = /sbin/nologin
>>> template homedir = /home/%D/%U
>>> winbind use default domain = yes
>>>
>>> wins support = yes
>>> socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
>>>
>>> [homes]
>>> comment = Home Directories
>>> browseable = no
>>> writable = yes
>>>
>>>
>>> [netlogon]
>>> comment = Network Logon Service
>>> path = /var/lib/samba/netlogon
>>> guest ok = yes
>>> writable = no
>>> share modes = no
>>>
>>>
>> --
>> To unsubscribe from this list go to the following URL and read the
>> instructions: https://lists.samba.org/mailman/options/samba
>>
More information about the samba
mailing list