[Samba] Differences adding printers between Windows XP & Windows 7

[Jack Downes]

Okay, this turns out to be an oddity with the printer driver it seems.  
I can use the 32 bit UPD driver on both 32 and 64 bit clients without 
issue.  Nevermind, and disregard.

thanks,
Jack


On 02/09/2011 16:22, Jack Downes wrote:
> Not sure what's going on here, but it's got to be a permissions thing 
> it would seem.
>
> Background:
> working ADS.
> Samba 3.5.6 atop Freebsd 8.1 as domain member
>
>
> When I attempt to load drivers with Windows XP Pro (32bit), everything 
> is fine.  I can load either x32 drivers or x64 drivers.
>
> The same cannot be said for Windows 7.  I cannot correctly load 
> drivers with Windows 7, and here is a typical error when attempting to 
> load x64 drivers with Windows 7 Pro (64 bit).
>
> -- 
> [2011/02/09 15:49:46.330375,  3]   switch message SMBclose (pid 2564) 
> conn 0x803c1cc50
> [2011/02/09 15:49:46.330433,  3]   setting sec ctx (1001, 1001) - 
> sec_ctx_stack_ndx = 0
> [2011/02/09 15:49:46.330519,  3]   close fd=46 fnum=17359 (numopen=1)
> [2011/02/09 15:49:46.330657,  3]   fill_share_mode_lock failed
> [2011/02/09 15:49:46.330700,  3]   fill_share_mode_lock failed
> [2011/02/09 15:49:46.330783,  2]   printserver closed file 
> x64/SETF9B9.tmp (numopen=0) NT_STATUS_OK
> [2011/02/09 15:49:46.332043,  3]   Transaction 9443 of length 112 (0 
> toread)
> [2011/02/09 15:49:46.332084,  3]   switch message SMBtrans2 (pid 2564) 
> conn 0x803c1cc50
> [2011/02/09 15:49:46.332119,  3]   setting sec ctx (1001, 1001) - 
> sec_ctx_stack_ndx = 0
> [2011/02/09 15:49:46.332174,  3]   call_trans2qfilepathinfo: 
> TRANSACT2_QPATHINFO: level = 1004
> [2011/02/09 15:49:46.332345,  3]   call_trans2qfilepathinfo: 
> SMB_VFS_STAT of x64/cioum64.msi failed (No such file or directory)
> [2011/02/09 15:49:46.332463,  3]   error packet at smbd/trans2.c(5210) 
> cmd=50 (SMBtrans2) NT_STATUS_OBJECT_NAME_NOT_FOUND
> [2011/02/09 15:49:46.334642,  3]   Transaction 9444 of length 118 (0 
> toread)
> [2011/02/09 15:49:46.334746,  3]   switch message SMBtrans2 (pid 2564) 
> conn 0x803c1cc50
> [2011/02/09 15:49:46.334807,  3]   setting sec ctx (1001, 1001) - 
> sec_ctx_stack_ndx = 0
> [2011/02/09 15:49:46.334875,  3]   call_trans2findfirst: dirtype = 16, 
> maxentries = 1366, close_after_first=1, close_if_end = 1 
> requires_resume_key = 1 level = 0x104, max_data_bytes = 16384
> [2011/02/09 15:49:46.334967,  3]   creating new dirptr 256 for path 
> x64, expect_close = 1
>
>
> Any help would be appreciated.  Any more errors logging or whatnot 
> that i can provide I will.  this is at loglevel=3
>
> thanks,
> Jack
>