[Samba] Error 0x000003e6 when trying to connect to a printer from w2k8 (x64)

Moray Henderson Moray.Henderson at ict-software.org
Fri Sep 24 02:51:26 MDT 2010


(Alright, I'll top-post too.)

We recently had a problem with Sharp printers on Samba-3.4.8 with CentOS
5.4.  That was solved by using the PCL5 version of the driver instead of
the PCL6 version.  Is a similar trick available with Xerox?


Moray.
"To err is human.  To purr, feline"




>-----Original Message-----
>From: Mark Adams [mailto:mark at campbell-lange.net]
>Sent: 23 September 2010 17:47
>To: Matt LaPlante
>Cc: samba at lists.samba.org
>Subject: Re: [Samba] Error 0x000003e6 when trying to connect to a
printer
>from w2k8 (x64)
>
>I'm having the problem with an install on 3.4.8 -- The other printers
on
>this server work fine with win 7, It's just the Xerox printers.
>
>I noticed that the Xerox printers use the XeroxXpdPrint print
>processor, I wonder if this causes the issue? I understand HP's also do
>something similar. All the working printers use the winprint print
>processor.
>
>Regards,
>Mark
>
>On Wed, Sep 22, 2010 at 04:47:25PM -0500, Matt LaPlante wrote:
>> I've run into this with every version >3.3.  Very hard to isolate.  I
>> suggest adding to https://bugzilla.samba.org/show_bug.cgi?id=7567
>>
>> On Wed, Sep 22, 2010 at 4:27 PM, Bryan Hodgson
><hodgson at cse.lehigh.edu>wrote:
>>
>> >
>> > Same problem (0x000003e6) here, W7 (but not XP) 32 and 64-bit
>> > using the Ricoh native RPCS drivers for Aficio 6001 with Samba
>> > 3.5.4.  Very reproduceable; it fails 100% of the time.
>> >
>> > It worked successfully with 3.5.3 in early testing; am
>> > contemplating down-rev'ing.
>> >
>> > Bryan
>> >
>> > On Tue, Sep 21, 2010 at 05:03:28PM +0100, Mark Adams wrote:
>> > > Hi,
>> > >
>> > > I am also having this issue, with Win7 x64 printing to Xerox
>machines.
>> > > Did you get to the bottom of it? I am using raw cups printers.
>> > >
>> > > Regards,
>> > > Mark
>> > >
>> > > On Tue, Jul 13, 2010 at 12:37:16PM +0200, Thorsten Leiser wrote:
>> > > >
>> > > >
>> > > > Am 13.07.2010 11:15, schrieb Sean Crosby:
>> > > > >>
>> > > > >> On 07/12/2010 08:09 AM, Thorsten Leiser wrote:
>> > > > >>>> Hello,
>> > > > >>>>
>> > > > >>>> I'm trying to connect my W2k8 (x64) Server farm to our new
>> > installed
>> > > > >>>> printserver based on debian lenny with sernet samba 3.5.4
>> > installed.
>> > > > >>>> Everytime i try to connect to a printer share via point
and
>print,
>> > it
>> > > > >>>> fails with error 0x000003e6.
>> > > > >>>> When i do the same from Windows XP or from our old w2k3
(x64)
>> > server
>> > > > >>>> farm everything works excellent.
>> > > > >>>> Does anybody know a workaround. I installed nearly 80
>printers on
>> > the
>> > > > >>>> samba server and i don't want to do this again.
>> > > > >>>>
>> > > > >>>> Regards
>> > > > >>>>
>> > > > >>>> Thorsten
>> > > > >>>>
>> > > > >>>
>> > > > >> --
>> > > > >>
>> > > > >
>> > > > > Hi Thorsten,
>> > > > >
>> > > > > I had the same problem as you with a 2k8R2 server, and I
fixed
>it by
>> > > > > changing the version of pscript5.dll (and the other ps*
files)
>on my
>> > samba
>> > > > > server (in /usr/share/cups/drivers/x64). I was using the
>Win7/Vista
>> > 64bit
>> > > > > pscript5.dll file, but I had to change it to the version
shipped
>with
>> > 2k8
>> > > > > 64bit. Once I did that, the problems disappeared (and the
driver
>> > still works
>> > > > > win Win7 64bit and Vista 64bit).
>> > > > >
>> > > > > Sean
>> > > >
>> > > > Hi Sean,
>> > > >
>> > > > I replaced the drivers without success. I don't think it's a
>drivers
>> > > > problem in my case. The driver works perfect on our old samba
>3.2.5
>> > server.
>> > > >
>> > > > Thanks for your effort.
>> > > >
>> > > > Regards
>> > > >
>> > > > Thorsten
>> > > >
>> > > >
>> > > > --
>> > > >
>> > > > Thorsten Leiser
>> > > > IT-Systembetreuung
>> > > > SYNCHRON Gesellschaft für betriebswirtschaftliche
>> > > > Beratung und Informationssysteme mbH
>> > > > Liebknechtstr. 50
>> > > >
>> > > > 70565 Stuttgart-Vaihingen
>> > > >
>> > > > Fon: 0711/7868-356
>> > > > Fax: 0711/7868-446
>> > > >
>> > > > www.synchron-is.de
>> > > >
>> > > > Sitz der Gesellschaft: Stuttgart
>> > > > Registergericht: Amtsgericht Stuttgart, HRB 8619
>> > > > GF: Michael Schober
>> > > >
>> > --
>> > To unsubscribe from this list go to the following URL and read the
>> > instructions:  https://lists.samba.org/mailman/options/samba
>> >
>




More information about the samba mailing list