[Samba] high load printing with 3.2.15

[christoph.beyer at desy.de]

Hi,

I am still struggling with the printing in a AD2008 R2 environment I 
changed to 3.2.15 by now. Still very slow, I am running on solaris 10. Not 
sure if my clients are so chatty by now but it is really killing any 
performance. Using truss I see loads of:

19702:  fcntl(17, F_SETLKW64, 0xFFBFE640)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE150)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE218)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE578)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE640)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE150)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE218)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE578)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE640)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE150)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE218)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE578)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE640)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE150)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE218)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE578)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE640)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE150)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE218)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE578)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE640)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE150)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE218)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE578)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE640)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE150)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE218)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE578)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE640)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE150)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE218)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE578)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE640)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE150)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE218)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE578)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE640)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE150)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE218)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE578)               = 0
19702:  fcntl(17, F_SETLKW64, 0xFFBFE640)               = 0

Are there any hints how to get back to the old performance ???

cheers
 	~christoph


-- 
/*   Christoph Beyer     |   Office: Building 2b / 23     *\
  *   DESY                |    Phone: 040-8998-2317        *
  *   - IT -              |      Fax: 040-8998-4060        *
\*   22603 Hamburg       |     http://www.desy.de         */