[Samba] Samba as fileserver on Active Directory domain
Robert LeBlanc
robert at leblancnet.us
Mon Oct 5 17:28:11 MDT 2009
Sorry, my bad, 3.3.8 was the security release. It sounds like it is working
however. As far as ACLs, make sure that ACLs are turned on on your file
system (mount -o acl for most filesystems) and the make sure you have the
ACL packages for your distro installed (Debian apt-get install acl). Then
it's a matter of using the setfacl command like `setfacl -m
d:u:<ad-user>:rwx,u:<ad-user>:rwx,d:g:<ad-group>:rx,g:<ad-group>:rx
/my/shared/dir.
You can add as many ACLs as you want, remember that the linux default rwx
perms sets the max for ACL users and groups. If the linux user (owner) ACL
is rx, then even though an ACL specifies another user with rwx, they will
only have rx. The second thing to remember is that the default ACL is not
needed, but if specified will set those ACLs on all new files and
directories and act much like Windows. If you set the permissions using
Windows, the default ACL will be set. Thidly, only Linux user and group have
the file counted against their quota, permissions assigned in ACLs do not
affect thoes user and groups quotas. Fourtly, some applications are not ACL
aware, Apache for instance does not look at ACLs on Linux. To check your set
ACLs, use getfacl /this/is/my/file.
Hope that helps.
Robert LeBlanc
Life Sciences & Undergraduate Education Computer Support
Brigham Young University
On Mon, Oct 5, 2009 at 2:34 PM, Ivan Ordonez <iordonez at berkeley.edu> wrote:
> I was able to install 3.3.8 version of Samba. I am running it now. I can
> see shares, but could not write at all.
>
> ACL seems simple but I can't get it to work. Any help or advise would be
> greatly appreciated.
>
>
> Robert LeBlanc wrote:
>
> The changes have not made it into a 3.3.x release yet, 3.3.7 was a security
> release, ideally 3.3.8 should have the fix. There were quiet a number of
> configuration changes from 3.0.x to 3.3.x in regards to Active Directory,
> you may not be able to use you old config without updating some things.
>
> Robert LeBlanc
> Life Sciences & Undergraduate Education Computer Support
> Brigham Young University
>
>
> On Mon, Oct 5, 2009 at 10:02 AM, Ivan Ordonez <iordonez at berkeley.edu>wrote:
>
>>
>> I am using Samba version 3.0.36. When I upgraded to 3.3.7, I got some
>> "realm" complaints when I run testparm and some "ADS" related error. The
>> 3.3.7 version is masked by Gentoo portage and not sure if it will be
>> available soon.
>>
>> Thanks,
>> -Ivan
>>
>> Robert LeBlanc wrote:
>>
>> What version of samba are you using? I submitted a patch to Samba that is
>> in 3.4.1 and slated for the next version of 3.3.x that fixes the
>> workgroup/realm thing. It falls back to SPEGO without the patch, but it
>> takes a little while, the patch speeds things up.
>>
>> Robert LeBlanc
>> Life Sciences & Undergraduate Education Computer Support
>> Brigham Young University
>>
>>
>> On Fri, Oct 2, 2009 at 11:09 AM, Jonathan Petersson <
>> jpetersson at garnser.se> wrote:
>>
>>> How did you solve the kerberos portion how things, when winbind tries
>>> to connect to my server the kerberos sessions fails as it tries to
>>> connect with the workgroup instead of the realm.
>>>
>>> Thanks
>>>
>>> /Jonathan
>>>
>>> On Fri, Oct 2, 2009 at 9:36 AM, Ivan Ordonez <iordonez at berkeley.edu>
>>> wrote:
>>> >
>>> >
>>> > Jonathan Petersson wrote:
>>> >>
>>> >> Hi Ivan,
>>> >>
>>> >> I'm working on a similar thing but is having some issues with the
>>> >> kerberos sessions between samba and AD. Is your Samba server a member
>>> >> of a Win2k8R2 or a Win2k3 domain?
>>> >>
>>> >> Thanks
>>> >>
>>> >> /Jonathan
>>> >>
>>> >> On Fri, Oct 2, 2009 at 9:00 AM, Ivan Ordonez <iordonez at berkeley.edu>
>>> >> wrote:
>>> >>
>>> >>>
>>> >>> Robert LeBlanc wrote:
>>> >>>
>>> >>>>
>>> >>>> What are the permissions on /shared/drive? We use ACLs to control
>>> access
>>> >>>> rather than smb.conf. This gives us great flexability and you can
>>> kind
>>> >>>> of
>>> >>>> manage it using a Windows machine. If you have Kerberos keytab
>>> >>>> generated,
>>> >>>> you can smbmount on Linux using the -o sec=krb5 and no passwords are
>>> >>>> needed,
>>> >>>> it also obeys ACL. The only catch is that you need to use RID or
>>> LDAP
>>> >>>> for
>>> >>>> uid/gid mapping or else your permissions won't line up.
>>> >>>>
>>> >>>> Robert LeBlanc
>>> >>>> Life Sciences & Undergraduate Education Computer Support
>>> >>>> Brigham Young University
>>> >>>>
>>> >>>>
>>> >>>> On Thu, Oct 1, 2009 at 10:14 AM, Ivan Ordonez <
>>> iordonez at berkeley.edu
>>> >>>> <mailto:iordonez at berkeley.edu>> wrote:
>>> >>>>
>>> >>>> Hello,
>>> >>>>
>>> >>>> We have a Gentoo box running Samba and is a member of the Active
>>> >>>> Directory domain. This Gentoo box will be a fileserver when
>>> >>>> everything is completed and setup as it should. I want our users
>>> >>>> to login to their computer (Computers are all members of the same
>>> >>>> Active Directory domain) using Active Directory accounts/domain
>>> >>>> for authentication. I am using Winbind for Active Directory
>>> >>>> authentication/integration. I'm almost done except file permission
>>> >>>> issue. All is working smoothly (ie. wbinfo, smbclient, getent,
>>> >>>> etc.). I can access/map the shared drive on the Gentoo box from
>>> >>>> any Windows computer, login to a machine without a problem using
>>> >>>> Active Directory accounts. The Active Directory authentication
>>> >>>> with Winbind is working as it should.
>>> >>>>
>>> >>>> For some odd reason, I can't figure out how to give permissions to
>>> >>>> all users the ability to make changes/add new folders on the
>>> >>>> shared drive. I am getting access denied even when the users or
>>> >>>> group are valid users of the shared drive per smb.conf. Below is
>>> >>>> my smb.conf shared configuration:
>>> >>>>
>>> >>>> [shared]
>>> >>>> comment = shared
>>> >>>> path = /shared/drive
>>> >>>> read only = no
>>> >>>> inherit permissions = yes
>>> >>>> create mask = 755
>>> >>>> directory mask = 755
>>> >>>> valid users = @"MYDOMAIN+mygroup"
>>> >>>> browseable = yes
>>> >>>> writable = yes
>>> >>>>
>>> >>>> Any help would be greatly appreciated.
>>> >>>>
>>> >>>> -Ivan
>>> >>>> -- To unsubscribe from this list go to the following URL and
>>> read
>>> >>>> the
>>> >>>> instructions: https://lists.samba.org/mailman/options/samba
>>> >>>>
>>> >>>>
>>> >>>
>>> >>> Hi,
>>> >>>
>>> >>> The files and folders on the shared drive are owned by local Linux
>>> >>> account.
>>> >>> The permissions are read, write and execute by the owner, read and
>>> write
>>> >>> by
>>> >>> group and all. I was hoping that smb.conf will control the shared
>>> drive
>>> >>> access but having a hard time doing so. I would like to use ACL if
>>> that
>>> >>> is
>>> >>> the best way to make it work. Would you mind giving me few pointers
>>> or
>>> >>> point me to the right direction to get started on ACL? I am no LDAP
>>> >>> expert
>>> >>> but I think I can get by if I have to use it.
>>> >>>
>>> >>> Thanks!
>>> >>>
>>> >>> -Ivan
>>> >>> --
>>> >>> To unsubscribe from this list go to the following URL and read the
>>> >>> instructions: https://lists.samba.org/mailman/options/samba
>>> >>>
>>> >>>
>>> >
>>> > Hi Jonathan,
>>> >
>>> > Our Samba server is a member of Win2k8R2 domain.
>>> > Thanks,
>>> > -Ivan
>>> >
>>>
>>
>>
>
More information about the samba
mailing list