[Samba] Impossible to access folders

[Adam Williams]

are you trying to connect to \\server\acn or \\server\share?

Thomas Vito wrote:
> Hello,
>
> On a RHEL 5 U2 server i am trying again to setup samba this time in user
> mode, see smb.conf below:
>
> [global]
>         workgroup = ACME
>         realm = EU.ACME.COM
>         server string = %h
>         password server = amsterdam-dc01.eu.acme.com
>         passdb backend = tdbsam
>         local master = No
>         dns proxy = No
>         wins server = 10.130.12.120
>         ldap ssl = no
>         idmap uid = 16777216-33554431
>         idmap gid = 16777216-33554431
>         cups options = raw
>
> [printers]
>         comment = All Printers
>         path = /var/spool/samba
>         printable = Yes
>         browseable = No
>
> [Share]
>         path = /home/acn
>         write list = acn, tci
>         read only = No
>         guest ok = Yes
>
> I have created two users acn and tci then used smbpasswd to create their
> password.
> I have created the share folder on the samba folder /home/acn and even tried
> a chmod 777 on it.
> Each time i try to connect to the share i get either an error from windows
> client : No network provider accepted the given network path. Sometimes i
> get a login prompt, enter my cred tci and password, then after a few minutes
> i get The specified network name is no longer available
>
> Here is the smbd.log:
>
> [2008/07/21 17:17:31, 0] lib/util_sock.c:get_peer_addr(1224)
>   getpeername failed. Error was Transport endpoint is not connected
> [2008/07/21 17:17:31, 0] lib/util_sock.c:get_peer_addr(1224)
>   getpeername failed. Error was Transport endpoint is not connected
> [2008/07/21 17:17:31, 0] lib/util_sock.c:read_data(534)
>   read_data: read failure for 4 bytes to client 0.0.0.0. Error = Connection
> reset by peer
>
> [root at amsdev-dv09 ~]# smbd -V
> Version 3.0.28-1.el5_2.1
>