[Samba] unable to build 3.2 on HP-UX
Michael Adam
ma at sernet.de
Mon Aug 4 21:01:12 GMT 2008
Ok, the ML keeps eating my attachments (and signatures)... :-(
You can find the Makfile here:
http://samba.org/~obnox/patches/Makefile.in.3.2.0-fixed
Cheers - Michael
Michael Adam wrote:
> Hi,
>
> this is a bug in Makefile.in: When not building
> shared libs there are variables expanded as empty
> by configure like @WINBIND_LIBS at . When these
> stand in a line of their own (like in the bin/smbd
> target just before the bin/nmbd target), this leads
> to lines consisting only of tabs + maybe spaces.
> This leads to the build errors you had.
>
> This is all fixed in the v3-2-stable tree, and the
> fix will be in 3.2.1 which is going to be released
> tomorrow.
>
> I attach a fixed Makefile.in if you would like to test
> it immediately. You should only need to run
> ./config.status and then make.
>
> Cheers - Michael
>
> Dag Ager wrote:
> > Hi all,
> >
> > I'm trying to build Samba 3.2 on HP-UX 11.11. I already tried different
> > settings
> > (without ldap, active directory etc, building in a different directory)
> > but without
> > success.
> > The Problem is independent from configure options - called within the
> > source tree without any options leads exactly to the same result.
> >
> > Here are some informations about my setup:
> >
> > gcc (GCC) 4.2.3
> > HP-UX B.11.11
> > samba-3.2.0
> > PA-RISC 2.0 / 64Bit
> >
> > The following snippets are from my last attempt where i tried to build
> > in a seperate directory. When I build directly in the source directory
> > exactly the same happens.
> >
> > ../source/configure --prefix=/opt/samba --with-ldap=no
> >
> >
> > warnings during configure:
> >
> > ......
> > checking arpa/inet.h presence... yes
> > checking for arpa/inet.h... yes
> > checking netinet/ip.h usability... no
> > checking netinet/ip.h presence... yes
> > configure: WARNING: netinet/ip.h: present but cannot be compiled
> > configure: WARNING: netinet/ip.h: check for missing prerequisite
> > headers?
> > configure: WARNING: netinet/ip.h: see the Autoconf documentation
> > configure: WARNING: netinet/ip.h: section "Present But Cannot Be
> > Compiled"
> > configure: WARNING: netinet/ip.h: proceeding with the preprocessor's result
> > configure: WARNING: netinet/ip.h: in the future, the compiler will take
> > precedence
> > configure: WARNING: ## ---------------------------------------- ##
> > configure: WARNING: ## Report this to samba-technical at samba.org ##
> > configure: WARNING: ## ---------------------------------------- ##
> >
> > --> strage one, perhaps the cause for the problem
> > ....
> >
> > checking SONAMEFLAG... -Wl,+h
> > checking PICFLAG... -fPIC
> > checking NSSSONAMEVERSIONSUFFIX...
> > checking whether building shared libraries actually works... (Bundled)
> > cc: warning 422: Unknown option "b" ignored.
> > /usr/ccs/bin/ld: CODE_ONE_SYM fixup to non-code subspace in file
> > /usr/ccs/lib/crt0.o - shared library must be position independent. Use
> > +z or +Z to recompile.
> > no
> > checking used PICFLAG... -fPIE
> > checking for long long... yes
> > checking for intptr_t... (cached) yes
> > checking for LL suffix on long long integers... yes
> > ....
> > checking for Active Directory and krb5 support... auto
> > configure: WARNING: Disabling Active Directory support (requires LDAP
> > support)
> > checking for nscd_flush_cache in -lnscd... no
> > ....
> > checking whether to use shared libraries internally... false
> > configure: WARNING: --enable-shared-libs: no support for shared libraries
> > checking whether to build the libtalloc shared library... no shared
> > library support -- will supply static library
> > ...
> >
> > --> no more warnings and no errors at all during configure.
> >
> > compiler error:
> >
> > .....
> >
> > Compiling librpc/gen_ndr/ndr_libnet_join.c
> > mkdir nsswitch/libwbclient
> > Compiling nsswitch/libwbclient/wbclient.c
> > Compiling nsswitch/libwbclient/wbc_util.c
> > Compiling nsswitch/libwbclient/wbc_pwd.c
> > Compiling nsswitch/libwbclient/wbc_idmap.c
> > Compiling nsswitch/libwbclient/wbc_sid.c
> > Compiling nsswitch/libwbclient/wbc_pam.c
> > Compiling nsswitch/wb_common.c
> > Linking non-shared library bin/libwbclient.a
> > Compiling smbd/server.c
> > ../source/smbd/server.c: In function 'main':
> > ../source/smbd/server.c:1100: warning: passing argument 2 of
> > 'set_auth_parameters' from incompatible pointer type
> > Linking bin/smbd
> > sh[7]: bin/nmbd:: not found.
> > *** Error exit code 127
> >
> > Stop.
> >
> > --> as a test: created directory nmbd and restarted make:
> >
> > ....
> >
> > 11:02 da:en6[86]
> > make
> >
> > /opt/build/samba-3.2.0/build
> > Using FLAGS = -O -D_SAMBA_BUILD_=3
> > -I/opt/build/samba-3.2.0/build/../source/iniparser/src -Iinclude
> > -I/opt/build/samba-3.2.0/build/../source/include -I.
> > -I/opt/build/samba-3.2.0/build/../source
> > -I/opt/build/samba-3.2.0/build/../source/lib/replace
> > -I/opt/build/samba-3.2.0/build/../source/lib/talloc
> > -I/opt/build/samba-3.2.0/build/../source/lib/tdb/include
> > -I/opt/build/samba-3.2.0/build/../source/libaddns
> > -I/opt/build/samba-3.2.0/build/../source/librpc -DHAVE_CONFIG_H
> > -Iinclude -I../source/include -I. -I../source -I../source/lib/replace
> > -I../source/lib/talloc -I../source/lib/tdb/include -I../source/libaddns
> > -I../source/librpc -I../source/popt -I/include
> > -I/opt/build/samba-3.2.0/build/../source/lib -D_SAMBA_BUILD_=3
> > PICFLAG = -fPIE
> > LIBS = -lsec -lnsl -liconv
> > LDFLAGS = -pie -L./bin
> > DYNEXP = -Wl,-E,+b/usr/local/lib:/usr/lib
> > LDSHFLAGS = shared-libraries-disabled -L./bin
> > SHLIBEXT = shared_libraries_disabled
> > SONAMEFLAG = shared-libraries-disabled
> > Linking non-shared library bin/libtalloc.a
> > WARNING: you need to run ./config.status
> > Linking non-shared library bin/libsmbclient.a
> > Linking non-shared library bin/libsmbsharemodes.a
> > Linking bin/smbd
> > sh[7]: bin/nmbd:: not found.
> > *** Error exit code 127
> >
> >
> > --> not really better...
> >
> > Anyone an Idea? Are there any known Problem with the version of gcc I use?
> >
> > Dag
> >
> >
> >
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions: https://lists.samba.org/mailman/listinfo/samba
>
> --
> Michael Adam <ma at sernet.de> <obnox at samba.org>
> SerNet GmbH, Bahnhofsallee 1b, 37081 Göttingen
> phone: +49-551-370000-0, fax: +49-551-370000-9
> AG Göttingen, HRB 2816, GF: Dr. Johannes Loxen
> http://www.SerNet.DE, mailto: Info @ SerNet.DE
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/listinfo/samba
--
i.A. Michael Adam
--
Michael Adam <ma at sernet.de>
SerNet GmbH, Bahnhofsallee 1b, 37081 Göttingen
phone: +49-551-370000-0, fax: +49-551-370000-9
AG Göttingen, HRB 2816, GF: Dr. Johannes Loxen
http://www.SerNet.DE, mailto: Info @ SerNet.DE
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 206 bytes
Desc: not available
Url : http://lists.samba.org/archive/samba/attachments/20080804/3ae662e8/attachment.bin
More information about the samba
mailing list