[Samba] Re: Unusable performance over WAN (part 2)

[Chris Nighswonger]

On 10/12/07, James Lamanna <jlamanna at gmail.com> wrote:
> On 10/8/07, James Lamanna <jlamanna at gmail.com> wrote:
> > On 10/8/07, Mike Eggleston <mikeegg1 at mac.com> wrote:
> > > On Mon, 08 Oct 2007, James Lamanna might have said:
> > >
> > > > So as it turns out, apparently it was a window scaling issue.
> > > > Turning on an excessively large window size on the routers (thereby
> > > > enabling dynamic TCP window scaling) seems to have fixed the issue. I
> > > > now get transfer rates around 130-160k/s.
> > >
> > > Great. For hysterical porpoises please document what specific changes
> > > you made on the windows boxes and what specific changes you made on
> > > your router.
> > >
> > > Mike
> > >
> >
> > The only change I made on the routers was I added the global
> > configuration command (both Cisco routers btw)
> > ip tcp window-size 750000
> >
> > -- James
> >
>
> Apparently this was 'temporary'.
> I had to power cycle one of the routers, and lo and behold, the old,
> slow behavior is back even with the window-size being set.
>
> Now I'm clueless again.
>
> -- James

Are you sure there is no other underlying issues with the frame
circuit? Are you taking CRC errors on the T1 interface at either end,
etc.?

Chris