[Samba] Windows Client Print Queue does not getclearedafterjobcompletion....

[Ellison, David]

I am not sure, I would check however the hardware failed yesterday evening! CUPS I believe. 

Dave

> -----Original Message-----
> From: 
> samba-bounces+david.ellison=atkinsglobal.com at lists.samba.org 
> [mailto:samba-bounces+david.ellison=atkinsglobal.com at lists.sam
> ba.org] On Behalf Of stephane.purnelle at corman.be
> Sent: 31 January 2007 11:27
> To: samba at lists.samba.org
> Subject: RE: [Samba] Windows Client Print Queue does not 
> getclearedafterjobcompletion....
> 
> With CUPS (libcups), normally you don't have problem about 
> job jobcompletion.
> With LPD ou lprng, you must complete some parameter on 
> smb.conf (aka : 
> lpxxxx parameter and print command ). 
> 
> -----------------------------------
> Stéphane PURNELLE                         stephane.purnelle at corman.be
> Service Informatique       Corman S.A.           Tel : 00 32 
> 087/342467
> 
> "Mansell, Gary" <Gary.Mansell at ricardo.com> a écrit sur 
> 31/01/2007 12:21:41
> :
> 
> > Do you mean whether you use CUPS (CentOS 4.4 default) or LPD?
> > 
> > Can you please explain further?
> > 
> > On Wed, 2007-01-31 at 12:14 +0100, 
> stephane.purnelle at corman.be wrote:
> > > It's depend on print server you are using !
> > > 
> > > -----------------------------------
> > > Stéphane PURNELLE                         
> stephane.purnelle at corman.be
> > > Service Informatique       Corman S.A.           Tel : 00 32 
> 087/342467
> > > 
> > > samba-bounces+stephane.purnelle=corman.be at lists.samba.org a écrit 
> > > samba-bounces+sur
> > > 31/01/2007 10:21:50 :
> > > 
> > > > Hi,
> > > > 
> > > > I am too having the same problem when printing, I could 
> not find a 
> > > > solution other than as you do, remove it after.
> > > > 
> > > > I am still looking at this issue and will send to this 
> list if I 
> > > > get
> a
> > > > solution if no-one replies. :)
> > > > 
> > > > Dave
> > > > 
> > > > > -----Original Message-----
> > > > > From: 
> > > > > samba-bounces+david.ellison=atkinsglobal.com at lists.samba.org
> > > > > [mailto:samba-bounces+david.ellison=atkinsglobal.com at lists.sam
> > > > ba.org] On Behalf Of Mansell, Gary
> > > > > Sent: 31 January 2007 09:02
> > > > > To: samba at lists.samba.org
> > > > > Subject: [Samba] Windows Client Print Queue does not 
> get cleared 
> > > > > afterjobcompletion....
> > > > > 
> > > > > Hi,
> > > > > 
> > > > > I am running the default version of Samba that comes 
> with CentOS
> 4.4
> > > > > (3.0.10-1.4E.9) and I am experiencing a problem where 
> print jobs 
> > > > > do not get removed from the Windows print queue after 
> they have 
> > > > > been printed.
> > > > > 
> > > > > If I perform an lmstat on the Samba server I can confirm that 
> > > > > there are no jobs still waiting to print and hence the Samba 
> > > > > print queues should be empty also.
> > > > > 
> > > > > The jobs can be manually cancelled by the user after 
> they have 
> > > > > been printed but this is obviously a chore.
> > > > > 
> > > > > 
> > > > > Any advice gladly received
> > > > > 
> > > > > Regards
> > > > > 
> > > > > Gary Mansell
> > > > > --
> > > > > 
> > > > > This e-mail and any files transmitted with it are 
> confidential 
> > > > > and intended solely for the use of the individual or 
> entity to 
> > > > > whom they are addressed.
> > > > > If you have received this e-mail in error please notify the 
> > > > > sender immediately and delete this e-mail from your system.
> > > > > Please note that any views or opinions presented in 
> this e-mail 
> > > > > are solely those of the author and do not necessarily 
> represent 
> > > > > those of Ricardo (save for reports and other documentation 
> > > > > formally approved and signed for release to the intended 
> > > > > recipient).  Only Directors or Duly Authorised Officers are 
> > > > > authorised to enter into legally binding obligations 
> on behalf 
> > > > > of Ricardo unless the obligation is contained within 
> a Ricardo 
> > > > > Purchase Order.
> > > > > 
> > > > > Ricardo may monitor outgoing and incoming e-mails and other 
> > > > > telecommunications on its e-mail and 
> telecommunications systems.  
> > > > > By replying to this e-mail you give consent to such 
> monitoring.  
> > > > > The recipient should check this e-mail and any 
> attachments for 
> > > > > the presence of viruses.  Ricardo accepts no 
> liability for any 
> > > > > damage caused by any virus transmitted by this e-mail.  
> > > > > "Ricardo" means Ricardo plc and its subsidiary companies.
> > > > > 
> > > > > Ricardo plc is a public limited company registered in England 
> > > > > with registered number 00222915.
> > > > > The registered office of Ricardo plc is Shoreham Technical 
> > > > > Centre, Shoreham-by Sea, West Sussex, BN43 5FG.
> > > > > 
> > > > > --
> > > > > To unsubscribe from this list go to the following URL 
> and read 
> > > > > the
> > > > > instructions:  https://lists.samba.org/mailman/listinfo/samba
> > > > > 
> > > > > 
> > > > > This message has been scanned for viruses by 
> MailControl - (see 
> > > > > http://bluepages.wsatkins.co.uk/?4318150)
> > > > > 
> > > > 
> > > > 
> > > > This email and any attached files are confidential and 
> copyright 
> > > > protected. If you are not the addressee, any 
> dissemination of this 
> > > > communication is strictly prohibited. Unless otherwise 
> expressly 
> > > > agreed in writing, nothing stated in this communication 
> shall be 
> > > > legally binding.
> > > > 
> > > > Consider the environment. Please don't print this e-mail unless 
> > > > you really need to.
> > > > --
> > > > To unsubscribe from this list go to the following URL 
> and read the
> > > > instructions:  https://lists.samba.org/mailman/listinfo/samba
> > > --
> > > To unsubscribe from this list go to the following URL and read the
> > > instructions:  https://lists.samba.org/mailman/listinfo/samba
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/listinfo/samba
>