[Samba] Windows Client Print Queue does not getclearedafterjobcompletion....

[Mansell, Gary]

I am seeing the problem with CUPS printing....

On Wed, 2007-01-31 at 12:27 +0100, stephane.purnelle at corman.be wrote:

> With CUPS (libcups), normally you don't have problem about job
> jobcompletion.
> With LPD ou lprng, you must complete some parameter on smb.conf (aka : 
> lpxxxx parameter and print command ). 
> 
> -----------------------------------
> Stéphane PURNELLE                         stephane.purnelle at corman.be
> Service Informatique       Corman S.A.           Tel : 00 32 087/342467
> 
> "Mansell, Gary" <Gary.Mansell at ricardo.com> a écrit sur 31/01/2007 12:21:41 
> :
> 
> > Do you mean whether you use CUPS (CentOS 4.4 default) or LPD?
> > 
> > Can you please explain further?
> > 
> > On Wed, 2007-01-31 at 12:14 +0100, stephane.purnelle at corman.be wrote:
> > > It's depend on print server you are using !
> > > 
> > > -----------------------------------
> > > Stéphane PURNELLE                         stephane.purnelle at corman.be
> > > Service Informatique       Corman S.A.           Tel : 00 32 
> 087/342467
> > > 
> > > samba-bounces+stephane.purnelle=corman.be at lists.samba.org a écrit sur 
> > > 31/01/2007 10:21:50 :
> > > 
> > > > Hi,
> > > > 
> > > > I am too having the same problem when printing, I could not find a
> > > > solution other than as you do, remove it after.
> > > > 
> > > > I am still looking at this issue and will send to this list if I get 
> a
> > > > solution if no-one replies. :)
> > > > 
> > > > Dave 
> > > > 
> > > > > -----Original Message-----
> > > > > From: 
> > > > > samba-bounces+david.ellison=atkinsglobal.com at lists.samba.org 
> > > > > [mailto:samba-bounces+david.ellison=atkinsglobal.com at lists.sam
> > > > ba.org] On Behalf Of Mansell, Gary
> > > > > Sent: 31 January 2007 09:02
> > > > > To: samba at lists.samba.org
> > > > > Subject: [Samba] Windows Client Print Queue does not get 
> > > > > cleared afterjobcompletion....
> > > > > 
> > > > > Hi, 
> > > > > 
> > > > > I am running the default version of Samba that comes with CentOS 
> 4.4
> > > > > (3.0.10-1.4E.9) and I am experiencing a problem where print 
> > > > > jobs do not get removed from the Windows print queue after 
> > > > > they have been printed.
> > > > > 
> > > > > If I perform an lmstat on the Samba server I can confirm that 
> > > > > there are no jobs still waiting to print and hence the Samba 
> > > > > print queues should be empty also.
> > > > > 
> > > > > The jobs can be manually cancelled by the user after they 
> > > > > have been printed but this is obviously a chore.
> > > > > 
> > > > > 
> > > > > Any advice gladly received
> > > > > 
> > > > > Regards
> > > > > 
> > > > > Gary Mansell
> > > > > -- 
> > > > > 
> > > > > This e-mail and any files transmitted with it are 
> > > > > confidential and intended solely for the use of the 
> > > > > individual or entity to whom they are addressed.
> > > > > If you have received this e-mail in error please notify the 
> > > > > sender immediately and delete this e-mail from your system. 
> > > > > Please note that any views or opinions presented in this 
> > > > > e-mail are solely those of the author and do not necessarily 
> > > > > represent those of Ricardo (save for reports and other 
> > > > > documentation formally approved and signed for release to the 
> > > > > intended recipient).  Only Directors or Duly Authorised 
> > > > > Officers are authorised to enter into legally binding 
> > > > > obligations on behalf of Ricardo unless the obligation is 
> > > > > contained within a Ricardo Purchase Order.
> > > > > 
> > > > > Ricardo may monitor outgoing and incoming e-mails and other 
> > > > > telecommunications on its e-mail and telecommunications 
> > > > > systems.  By replying to this e-mail you give consent to such 
> > > > > monitoring.  The recipient should check this e-mail and any 
> > > > > attachments for the presence of viruses.  Ricardo accepts no 
> > > > > liability for any damage caused by any virus transmitted by 
> > > > > this e-mail.  "Ricardo" means Ricardo plc and its subsidiary 
> > > > > companies.
> > > > > 
> > > > > Ricardo plc is a public limited company registered in England 
> > > > > with registered number 00222915.
> > > > > The registered office of Ricardo plc is Shoreham Technical 
> > > > > Centre, Shoreham-by Sea, West Sussex, BN43 5FG.
> > > > > 
> > > > > --
> > > > > To unsubscribe from this list go to the following URL and read the
> > > > > instructions:  https://lists.samba.org/mailman/listinfo/samba
> > > > > 
> > > > > 
> > > > > This message has been scanned for viruses by MailControl - 
> > > > > (see http://bluepages.wsatkins.co.uk/?4318150)
> > > > > 
> > > > 
> > > > 
> > > > This email and any attached files are confidential and copyright 
> > > > protected. If you are not the addressee, any dissemination of this 
> > > > communication is strictly prohibited. Unless otherwise expressly 
> > > > agreed in writing, nothing stated in this communication shall be 
> > > > legally binding.
> > > > 
> > > > Consider the environment. Please don't print this e-mail unless you 
> > > > really need to. 
> > > > -- 
> > > > To unsubscribe from this list go to the following URL and read the
> > > > instructions:  https://lists.samba.org/mailman/listinfo/samba
> > > -- 
> > > To unsubscribe from this list go to the following URL and read the
> > > instructions:  https://lists.samba.org/mailman/listinfo/samba

-- 
------------------------------------------------------------------------------------ 
Gary Mansell 
Team Leader - Technical Computing 
Ricardo UK Ltd. 
Shoreham Technical Centre, Shoreham-By-Sea, West Sussex, BN43 5FG 
Email : Gary.Mansell at ricardo.com
Dial : +44 (0)1273 794485 | Fax :+44 (0)1273 794699  
A subsidiary of Ricardo plc. - www.ricardo.com
------------------------------------------------------------------------------------