[Fwd: [Samba] Re: Samba print problem (everything looks right)]

[Dale Schroeder]

This problem has been driving me crazy for a week.

Fedora Core 4, Cups 1.2.1 Samba 3.0.23a Thanks in advance.

 --
Curtis Maurand
Senior Network & Systems Engineer
BlueTarp Financial, Inc.
443 Congress St. 6th Floor
Portland, ME 04101
207.797.5900 x233 (office)
207.797.3833 (fax)
mailto:cmaurand at bluetarp.com
http://www.bluetarp.com
-- To unsubscribe from this list go to the following URL and read the 
instructions: https://lists.samba.org/mailman/listinfo/samba


If you used cupsaddsmb to export your printer, CUPS 1.2.1 had a bug, 
that caused problems with Samba.  (See below)
1.2.2 had a different bug with advanced features.  Try 1.2.3 or 1.2.4.

Dale

-------- Original Message --------
Subject: 	[Samba] Re: Samba print problem (everything looks right)
Date: 	Fri, 09 Jun 2006 09:34:55 -0400
From: 	Brian White <bcwhite at precidia.com>
Organization: 	Precidia Technologies http://www.precidia.com/
To: 	Alessandro Morgantini <gpz500 at technologist.com>
CC: 	samba at lists.samba.org
References: 	<4489752B.9050300 at technologist.com>



> I read your posts on samba mailing list.
> I have the same problem:
> I can print, but I can't open the printer properties page ("no driver" 
> message...).
> For me also, the drivers are read from samba server e written on 
> C:\WinNT\System32\spool\drivers\... (I have removed him in advance to 
> test this).

There was a bug in the cupssmbadd program that stripped all end-of-line 
characters during the conversion.  (Many thanks to Vincent Nicolas for 
catching this!)  See http://www.cups.org/str.php?L1750

                                          Brian
                                 ( bcwhite at precidia.com )

-------------------------------------------------------------------------------
              BREAKFAST.COM Halted...  Cereal Port Not Responding
-- 
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/listinfo/samba