[Samba] SWAT is working but shows smbd/nmbd: not running

[Zoran Ljubisic]

Jörg Nissen wrote:
> Take a look at your /etc/services and make sure you have the following
> entries:
>
>     netbios-ns    137/tcp
>     netbios-ns    137/udp
>     netbios-dbm    138/tcp
>     netbios-dbm    138/udp
>     netbios-ssn    139/tcp
>     netbios-ssn    139/udp

Yes, I have them enabled in my /etc/services

> In your smb.conf do you have 127.0.0.1 added to
>     interfaces =
>     hosts allow =
> ?

I think this is not important if I am connecting from another machine, is 
it?

Zoran

>
>
> MfG
> Jörg Nissen
> ----- Original Message -----
> From: "Zoran Ljubisic" <powersoft at bj.t-com.hr>
> To: "Jörg Nissen" <joenis at arcor.de>; <samba at lists.samba.org>
> Sent: Monday, March 20, 2006 2:57 PM
> Subject: Re: [Samba] SWAT is working but shows smbd/nmbd: not running
>
>
>> Jörg Nissen wrote:
>>> It is most probably not a mainboard issue. You should post your
>>> smb.conf here as SWAT communicates with smbd/nmbd over 127.0.0.1 and
>>> ports 137, 138, 445. So you should make sure that communication is
>>> allowed.
>>
>> I am not using firewall but looks like ports 137 and 138 are not
>> opened: server:/var/log/samba # nmap localhost
>>
>> Starting nmap 3.81 ( http://www.insecure.org/nmap/ ) at 2006-03-20
>> 14:55 CET
>> Interesting ports on localhost (127.0.0.1):
>> (The 1649 ports scanned but not shown below are in state: closed)
>> PORT     STATE SERVICE
>> 22/tcp   open  ssh
>> 25/tcp   open  smtp
>> 53/tcp   open  domain
>> 110/tcp  open  pop3
>> 111/tcp  open  rpcbind
>> 139/tcp  open  netbios-ssn
>> 199/tcp  open  smux
>> 445/tcp  open  microsoft-ds
>> 631/tcp  open  ipp
>> 901/tcp  open  samba-swat
>> 953/tcp  open  rndc
>> 5801/tcp open  vnc-http-1
>> 5901/tcp open  vnc-1
>> 5902/tcp open  vnc-2
>>
>> Nmap finished: 1 IP address (1 host up) scanned in 0.326 seconds
>> server:/var/log/samba #
>>
>> What should I do to open this ports on Suse 9.3 prof?
>>
>> Zoran
>>
>>
>>>
>>>
>>> MfG
>>> Jörg Nissen
>>>
>>> ----- Original Message -----
>>> From: ""Zoran Ljubisic"" <powersoft at bj.t-com.hr>
>>> Newsgroups: mailing.unix.samba
>>> Sent: Wednesday, March 08, 2006 4:02 PM
>>> Subject: [Samba] SWAT is working but shows smbd/nmbd: not running
>>>
>>>
>>>> Hi all,
>>>>
>>>>
>>>>
>>>> I had nForce3 motherboard that has broken. Than I bought nForce4
>>>> motherboard. I connected old hard disk to this new nForce4
>>>> motherboard. For
>>>> net and sound support I download drivers from nvidia.com site. This
>>>> driver asks kernel source to be on local disk and gcc compiler.
>>>>
>>>> After I installed kernel source and gcc, driver is successfully
>>>> installed.
>>>>> From that point (but maybe it is not related all) when I connect
>>>>> to swat,
>>>> log in, and click "status", I get valid page with open connections
>>>> and files, but smbd and nmbd are show as not running.
>>>>
>>>> In same time everything else works as expected.
>>>>
>>>>
>>>>
>>>> I am using 64-bit version of Suse 9.3 prof. (swat
>>>> version:3.0.12-5-SUSE). What went wrong?
>>>>
>>>>
>>>>
>>>> Zoran
>>>>
>>>>
>>>>
>>>> --
>>>> To unsubscribe from this list go to the following URL and read the
>>>> instructions:  https://lists.samba.org/mailman/listinfo/samba