[Samba] SWAT is working but shows smbd/nmbd: not running

[Jörg Nissen]

Take a look at your /etc/services and make sure you have the following 
entries:

    netbios-ns    137/tcp
    netbios-ns    137/udp
    netbios-dbm    138/tcp
    netbios-dbm    138/udp
    netbios-ssn    139/tcp
    netbios-ssn    139/udp

In your smb.conf do you have 127.0.0.1 added to
    interfaces =
    hosts allow =
?


MfG
Jörg Nissen
----- Original Message ----- 
From: "Zoran Ljubisic" <powersoft at bj.t-com.hr>
To: "Jörg Nissen" <joenis at arcor.de>; <samba at lists.samba.org>
Sent: Monday, March 20, 2006 2:57 PM
Subject: Re: [Samba] SWAT is working but shows smbd/nmbd: not running


> Jörg Nissen wrote:
>> It is most probably not a mainboard issue. You should post your
>> smb.conf here as SWAT communicates with smbd/nmbd over 127.0.0.1 and
>> ports 137, 138, 445. So you should make sure that communication is
>> allowed.
>
> I am not using firewall but looks like ports 137 and 138 are not opened:
>
> server:/var/log/samba # nmap localhost
>
> Starting nmap 3.81 ( http://www.insecure.org/nmap/ ) at 2006-03-20 14:55 
> CET
> Interesting ports on localhost (127.0.0.1):
> (The 1649 ports scanned but not shown below are in state: closed)
> PORT     STATE SERVICE
> 22/tcp   open  ssh
> 25/tcp   open  smtp
> 53/tcp   open  domain
> 110/tcp  open  pop3
> 111/tcp  open  rpcbind
> 139/tcp  open  netbios-ssn
> 199/tcp  open  smux
> 445/tcp  open  microsoft-ds
> 631/tcp  open  ipp
> 901/tcp  open  samba-swat
> 953/tcp  open  rndc
> 5801/tcp open  vnc-http-1
> 5901/tcp open  vnc-1
> 5902/tcp open  vnc-2
>
> Nmap finished: 1 IP address (1 host up) scanned in 0.326 seconds
> server:/var/log/samba #
>
> What should I do to open this ports on Suse 9.3 prof?
>
> Zoran
>
>
>>
>>
>> MfG
>> Jörg Nissen
>>
>> ----- Original Message -----
>> From: ""Zoran Ljubisic"" <powersoft at bj.t-com.hr>
>> Newsgroups: mailing.unix.samba
>> Sent: Wednesday, March 08, 2006 4:02 PM
>> Subject: [Samba] SWAT is working but shows smbd/nmbd: not running
>>
>>
>>> Hi all,
>>>
>>>
>>>
>>> I had nForce3 motherboard that has broken. Than I bought nForce4
>>> motherboard. I connected old hard disk to this new nForce4
>>> motherboard. For
>>> net and sound support I download drivers from nvidia.com site. This
>>> driver asks kernel source to be on local disk and gcc compiler.
>>>
>>> After I installed kernel source and gcc, driver is successfully
>>> installed.
>>>> From that point (but maybe it is not related all) when I connect to
>>>> swat,
>>> log in, and click "status", I get valid page with open connections
>>> and files, but smbd and nmbd are show as not running.
>>>
>>> In same time everything else works as expected.
>>>
>>>
>>>
>>> I am using 64-bit version of Suse 9.3 prof. (swat
>>> version:3.0.12-5-SUSE). What went wrong?
>>>
>>>
>>>
>>> Zoran
>>>
>>>
>>>
>>> --
>>> To unsubscribe from this list go to the following URL and read the
>>> instructions:  https://lists.samba.org/mailman/listinfo/samba
>
>