[Samba] Domain Authentication Problem
Bradish, Jeff
jeff.bradish at eds.com
Thu Mar 16 16:26:44 GMT 2006
One correction to my original email; I am running Solaris 9 rather than Solaris 8 (typo).
Following are my smb.conf settings:
[global]
workgroup = AMER
netbios name = USAHSSMC001
netbios aliases = USAHSSMC001
server string = EDS GSCO
security = DOMAIN
encrypt passwords = Yes
password server = usahd100 uspld100 usahd101 usahd102 usahd103 usahd104
username map = /etc/samba/username.map
log level = 4
preferred master = No
local master = No
domain master = No
dns proxy = No
create mask = 0664
name resolve order = lmhosts
My issue is: Everything was fine until the AD domain controllers were "upgraded" to Windows Server 2003 SP1. User authentication would no longer function until I pointed the password server entry to domain controllers that have not been upgraded to SP1.
I upgraded to Samba 3.0.21c, downloaded the pre-compiled version for Solaris 9 and installed with no problems. At this point, I cannot get Samba 3.0.21c to be recognized by either Windows Server 2003 or Windows Server 2003 SP1. I have tried rejoining the domain with no success.
Samba log entries:
cli_nt_create failed on pipe \NETLOGON to machine <name>. Error was NT_STATUS_ACCESS_DENIED
failed to get schannel session key from server <name> for domain <domainname>.
domain_client_validate: Domain password server not available
check_ntlm_password: Authentication for user [id] -> [id] FAILED with error NT_STATUS_TRUSTED_RELATIONSHIP_FAILURE
At this point, I can not get domain security to function for either Samba version when pointed to a Windows Server 2003 SP1 AD controller.
Any help with this situation would be appreciated.
Jeff Bradish
* mailto: jeff.bradish at eds.com
-----Original Message-----
From: samba-bounces+jeff.bradish=eds.com at lists.samba.org [mailto:samba-bounces+jeff.bradish=eds.com at lists.samba.org] On Behalf Of Craig White
Sent: Thursday, March 16, 2006 10:58 AM
To: samba at lists.samba.org
Subject: RE: [Samba] Domain Authentication Problem
On Thu, 2006-03-16 at 16:16 +0100, Johannes Michler wrote:
> I've got similar Problems:
> When I try to connect to our samba server I get an "Die Anforderung
> wird nicht unterstützt" Error Message.
> >From our other Machines (even some Win2k3 Servers) I can access the
> >Files,
> what could be wrong?
>
> The samba server has the following conf-file:
>
> # This is the main Samba configuration file. You should read the #
> smb.conf(5) manual page in order to understand the options listed #
> here. Samba has a huge number of configurable options (perhaps too #
> many!) most of which are not shown in this example # # Any line which
> starts with a ; (semi-colon) or a # (hash) # is a comment and is
> ignored. In this example we will use a # # for commentry and a ; for
> parts of the config file that you # may wish to enable # # NOTE:
> Whenever you modify this file you should run the command "testparm"
> # to check that you have not many any basic syntactic errors.
> #
> #======================= Global Settings
> =====================================
> [global]
>
> # workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4
> workgroup = FZI
>
> # Unter welchem Namen soll der Server sichtbar sein - vorzugsweise
> gleich dem DNS-Namen
> netbios name = goedel
>
> # server string is the equivalent of the NT Description field
> server string = SWT Samba Server
>
> # This option is important for security. It allows you to restrict #
> connections to machines which are on your local network. The #
> following example restricts access to two C class networks and # the
> "loopback" interface. For more examples of the syntax see # the
> smb.conf man page
> ; hosts allow = 192.168.1. 192.168.2. 127.
> hosts allow = ############ 127.
>
>
> # If you want to automatically load your printer list rather # than
> setting them up individually then you'll need this
> load printers = yes
>
> # you may wish to override the location of the printcap file
> ; printcap name = /etc/printcap
>
> # on SystemV system setting printcap name to lpstat should allow # you
> to automatically obtain a printer list from the SystemV spool # system
> ; printcap name = lpstat
>
> # It should not be necessary to specify the print system type unless #
> it is non-standard. Currently supported print systems include:
> # bsd, sysv, plp, lprng, aix, hpux, qnx
> ; printing = bsd
>
> # Uncomment this if you want a guest account, you must add this to
> /etc/passwd # otherwise the user "nobody" is used ; guest account =
> pcguest
>
> # this tells Samba to use a separate log file for each machine # that
> connects
> ; log file = /usr/sfw/lib/smb.conf.%m
> ; log file =/var/samba/log/%m.log
> log file =/var/samba/log/smbd.log
>
> # Put a capping on the size of the log files (in Kb).
> max log size = 100
>
>
>
> security = server
> password server = ad
> encrypt passwords = yes
> os level = 1
>
> # starke Verschluesselung fuer eingehende Verbindungen
> ; server NTLMv2 = auto
>
> # starke Verschluesselung fuer ausgehende Verbindungen ; client
> NTLMv2 = auto
>
> # Gastzugriffe laufen unter diesem Account
> guest account = nobody
>
> # Unbekannte Benutzer werden als Gast behandelt
> map to guest = Bad User
>
> # Samba versucht nicht, Masterbrowser zu werden
> local master = no
>
>
>
>
> # Security mode. Most people will want user level security. See #
> security_level.txt for details.
> ; security = user
>
> # Use password server option only with security = server # The
> argument list may include:
> # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
> # or to auto-locate the domain controller/s
> # password server = *
> ; password server = <NT-Server-Name>
>
> # Note: Do NOT use the now deprecated option of "domain controller"
> # This option is no longer implemented.
>
> # You may wish to use password encryption. Please read #
> ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
> # Do not enable this option unless you have read those documents ;
> encrypt passwords = yes
>
> # Using the following line enables you to customise your configuration
> # on a per machine basis. The %m gets replaced with the netbios name #
> of the machine that is connecting
> ; include = /var/samba/log.%m
>
> # Most people will find that this option gives better performance.
> # See speed.txt and the manual pages for details # You may want to add
> the following on a Linux system:
> # SO_RCVBUF=8192 SO_SNDBUF=8192
> socket options = TCP_NODELAY
>
> # Configure Samba to use multiple interfaces # If you have multiple
> network interfaces then you must list them # here. See the man page
> for details.
> ; interfaces = 192.168.12.2/24 192.168.13.2/24
>
> # Browser Control Options:
> # set local master to no if you don't want Samba to become a master #
> browser on your network. Otherwise the normal election rules apply
> ; local master = no
>
> # OS Level determines the precedence of this server in master browser
> # elections. The default value should be reasonable
> ; os level = 33
>
> # Domain Master specifies Samba to be the Domain Master Browser. This
> # allows Samba to collate browse lists between subnets. Don't use this
> # if you already have a Windows NT domain controller doing this job
> ; domain master = yes
>
> # Preferred Master causes Samba to force a local browser election on
> startup # and gives it a slightly higher chance of winning the election
> ; preferred master = yes
>
> # Enable this if you want Samba to be a domain logon server for #
> Windows95 workstations.
> ; domain logons = yes
>
> # if you enable domain logons then you may want a per-machine or # per
> user logon script # run a specific logon batch file per workstation
> (machine)
> ; logon script = %m.bat
> # run a specific logon batch file per username
> ; logon script = %U.bat
>
> # Where to store roving profiles (only for Win95 and WinNT)
> # %L substitutes for this servers netbios name, %U is username
> # You must uncomment the [Profiles] share below
> ; logon path = \\%L\Profiles\%U
>
> # Windows Internet Name Serving Support Section:
> # WINS Support - Tells the NMBD component of Samba to enable it's WINS
> Server
> ; wins support = yes
>
> # WINS Server - Tells the NMBD components of Samba to be a WINS Client
> # Note: Samba can be either a WINS Server, or a WINS Client, but NOT
> both
> ; wins server = w.x.y.z
> wins server = ############
>
> # WINS Proxy - Tells Samba to answer name resolution queries on #
> behalf of a non WINS capable client, for this to work there must be #
> at least one WINS Server on the network. The default is NO.
> ; wins proxy = yes
>
> # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS
> names # via DNS nslookups. The built-in default for versions 1.9.17 is
> yes, # this has been changed in version 1.9.18 to no.
> dns proxy = yes
>
> # Case Preservation can be handy - system default is _no_ # NOTE:
> These can be set on a per share basis
> preserve case = yes
> short preserve case = yes
> # Default case is normally upper case for all DOS files ; default
> case = lower # Be very careful with case sensitivity - it can break
> things!
> case sensitive = no
> ; mangle case = no
>
> force create mode = 644
> force directory mode = 755
> map archive = no
>
> #============================ Share Definitions
> ============================== [homes]
> comment = UNIX Home Directories
> browseable = yes
> writable = yes
> invalid users = root
>
> [fzi]
> comment = FZI NFS-Wurzel
> path = /fzi
> writable = true
>
>
> [public]
> comment = Public Stuff
> path = /export/home/samba
> public = yes
> browseable = yes
> writable = yes
> printable = no
> write list = @swt @rud @dtp
>
----
It would help if you don't include all of the unnecessary stuff (especially comments)...
testparm -s > /tmp/samba-config.txt # would be better
your usage of
security = server
password server = ad
doesn't seem correct.
is ad a netbios name?
are you sure you want to use security = server and not security = ADS ?
at least you should make sure that 'password server = WHATEVER' has WHATEVER either an ip address or a resolvable domain controller.
see 'man smb.conf'
Craig
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/listinfo/samba
More information about the samba
mailing list