[Samba] [Samba Version 3.0.20b-3.4-SUSE]: WinXP-Error writing
to share
Robert Schetterer
robert at schetterer.org
Tue Mar 7 11:01:01 GMT 2006
Hi Bjoern,
in general there is no problem with suse samba etc
ich have very large samba domains up and running, but dont forget
samba 3 is acting like win nt 4 server ( pdc )
its not an active dir controller as win 2003 server
if you need acitve dir for i.e exchange version higher than 5.5
you have to wait until samba 4 gets released, so think about that before
your migration.
at a look at your logs this seems a network problem
have you any firewalls enabled on the suse or/and on the win client?
-Transport endpoint is not connected
for testing do not use this parameters
use sendfile =
large readwrite =
max xmit =
hosts allow =
your conf does not look very logical to me
why dont try edit the suse default conf
create mask = 0777
directory mask = 0777
dont do this in global
perhaps you should study more in the smb faqs which are online in german
too, ther are easy examples in it for testing
and migration examples.
dont mess around with groups etc at starting with samba
Best Regards
Björn Mayer schrieb:
> Hello mailing-list,
>
> this is my first post and i hope that you enjoy my very bad but
> sometimes funny english.
>
> My Problem is the following:
>
> First of all, my server-config:
> Samba Version 3.0.20b-3.4-SUSE
> on a
> SUSE Linux Enterprise Server 9
> with Kernel 2.6.5-7.252-smp
>
>
> Now the problem is, that samba generally works fine, but it doesn't work
> to work with a special application directly on a samba-share.
> This app is EPLAN, who is configured to save his project-data on the
> servershare, because of the fact that there everything will be backuped
> regularly.
>
> All this worked prior with a Windows Server 2003, which now should be
> replaced with the linux samba-server.
>
> Now when we switched to Samba for testing purposes the error occured,
> that Windows throws the following Error while working with EPLAN on the
> networkshare:
>
> -----------------------------------------------------------------------
> Windows - Datenverlust beim schreiben
>
> Es konnten nicht alle Daten für die Datei \\UNC-Path-to-share\file.ext
> gespeichert werden. Die Daten gingen verloren. Mögliche Ursache könnten
> Computerhardware oder Netzwerkverbindung sein. Versuchen Sie, die
> Dateien...
> -----------------------------------------------------------------------
>
> which in english means something like
> -----------------------------------------------------------------------
> Windows - data loss at writing
>
> It was not possible to save all data for the file
> \\UNC-Path-to-share\file.ext. The data was lossed. Possible reasons can
> be the Hardware or networkconnection. ...
> -----------------------------------------------------------------------
>
> Copying data on the share while using copy ans paste with the explorer
> seems to be working fine.
>
> I have no idea which reason this can have. Maybe some pro here outside
> has an idea.
> Of course there can be recognized something in the /var/log/messages:
> ------------------------------------------------------------------------
> Mar 7 11:14:47 mve-server2 smbd[8195]: [2006/03/07 11:14:47, 0]
> lib/util_sock.c:write_data(554)
> Mar 7 11:14:47 mve-server2 smbd[8195]: write_data: write failure in
> writing to client 0.0.0.0. Error Connection reset by peer
> Mar 7 11:14:47 mve-server2 smbd[8195]: [2006/03/07 11:14:47, 0]
> lib/util_sock.c:send_smb(762)
> Mar 7 11:14:47 mve-server2 smbd[8195]: Error writing 5 bytes to
> client. -1. (Connection reset by peer)
> Mar 7 11:18:55 mve-server2 smbd[8244]: [2006/03/07 11:18:55, 0]
> lib/util_sock.c:get_peer_addr(1222)
> Mar 7 11:18:55 mve-server2 smbd[8244]: getpeername failed. Error was
> Transport endpoint is not connected
> Mar 7 11:18:55 mve-server2 smbd[8250]: [2006/03/07 11:18:55, 0]
> lib/util_sock.c:get_peer_addr(1222)
> Mar 7 11:18:55 mve-server2 smbd[8250]: getpeername failed. Error was
> Transport endpoint is not connected
> Mar 7 11:18:55 mve-server2 smbd[8250]: [2006/03/07 11:18:55, 0]
> lib/util_sock.c:get_peer_addr(1222)
> Mar 7 11:18:55 mve-server2 smbd[8250]: getpeername failed. Error was
> Transport endpoint is not connected
> Mar 7 11:18:55 mve-server2 smbd[8250]: [2006/03/07 11:18:55, 0]
> lib/access.c:check_access(328)
> Mar 7 11:18:55 mve-server2 smbd[8250]: [2006/03/07 11:18:55, 0]
> lib/util_sock.c:get_peer_addr(1222)
> Mar 7 11:18:55 mve-server2 smbd[8250]: getpeername failed. Error was
> Transport endpoint is not connected
> Mar 7 11:18:55 mve-server2 smbd[8250]: Denied connection from (0.0.0.0)
> Mar 7 11:18:55 mve-server2 smbd[8250]: [2006/03/07 11:18:55, 0]
> lib/util_sock.c:get_peer_addr(1222)
> Mar 7 11:18:55 mve-server2 smbd[8250]: getpeername failed. Error was
> Transport endpoint is not connected
> Mar 7 11:18:55 mve-server2 smbd[8250]: Connection denied from 0.0.0.0
> Mar 7 11:18:55 mve-server2 smbd[8250]: [2006/03/07 11:18:55, 0]
> lib/util_sock.c:write_data(554)
> Mar 7 11:18:55 mve-server2 smbd[8250]: write_data: write failure in
> writing to client 0.0.0.0. Error Connection reset by peer
> Mar 7 11:18:55 mve-server2 smbd[8250]: [2006/03/07 11:18:55, 0]
> lib/util_sock.c:send_smb(762)
> Mar 7 11:18:55 mve-server2 smbd[8250]: Error writing 5 bytes to
> client. -1. (Connection reset by peer)
> ------------------------------------------------------------------------
>
> After some search i put the following params into my smb.conf, but this
> didn't help:
> ------------------------------------------------------------------------
> use sendfile = no
> large readwrite = no
> max xmit = 16644
> ------------------------------------------------------------------------
>
> Of course i will show you my complete smb.conf:
> ------------------------------------------------------------------------
> [global]
> workgroup = mve
> socket options = SO_KEEPALIVE IPTOS_LOWDELAY TCP_NODELAY
> encrypt passwords = yes
> unix extensions = yes
> create mask = 0777
> directory mask = 0777
> username map = /etc/samba/smbusers
> wins server = 172.20.6.104
> wins support = no
> domain logons = No
> domain master = No
> netbios name = mve-server
> security = user
> server string = mve-server
> use sendfile = no
> large readwrite = no
> max xmit = 16644
> hosts allow = 172.20. 192.
>
>
> [mve]
> path = /daten/mve-server
> valid users = @mve, @mv
> admin users = @mve
> read list = @mve, @mv
> write list = @mve
> guest ok = No
> read only = No
> printable = No
> browseable = Yes
> ------------------------------------------------------------------------
>
> mve is the share that causes the problem. i never tested anotherone,
> because of the fact that there is no other share ;).
>
> I hope for any ideas,
> Björn Mayer
>
More information about the samba
mailing list