[Samba] Problem with NTConfig.POL+SAMBA+LDAP

[Mike]

I'am using the following SAMBA version on a DEBIAN SARGE: 3.0.14a-3sarge1. 
Well I add this instructions: acl check permissions = no but When I launch a "testparm", the result is: 
Unknown parameter encountered: "acl check permissions" 
Ignoring unknown parameter "acl check permissions" 

I install SAMBA with apt-get! Do I need to download source and configure it with acls support? 

For information: 

[...] 
#### Debugging/Accounting #### 
log file = /var/log/samba/log.%m 
log level = 3 
max log size = 1000 
syslog = 0 
panic action = /usr/share/samba/panic-action %d 

[...] 

[netlogon] 
comment = Network Logon Service 
path = /home/samba/netlogon 
browseable = No 
guest ok = yes 

And : 

# ls -al /home/samba/ 
total 8 
drwxr-xr-x 4 root root 36 2005-12-22 13:27 . 
drwxr-xr-x 48 root root 4096 2006-01-25 14:08 .. 
drwxr-xr-x 2 root root 4096 2006-02-22 10:18 netlogon 

# ls -al /home/samba/netlogon/ 
-rwxr-xr-x 1 root root 262144 2006-01-25 11:33 NTConfig.POL 
-rwxr-xr-x 1 root root 176 2005-12-23 10:26 smbuser01.bat 
-rwxr-xr-x 1 root root 176 2005-12-23 10:26 smbuser02.bat 
-rwxr-xr-x 1 root root 182 2005-12-23 10:27 smbuser03.bat 
-rwxr-xr-x 1 root root 182 2005-12-23 10:27 smbuser04.bat 

And no error appears on the log! 
Have you got an idea? 

Mike 

----- Original Message ----- 
From: Adam Tauno Williams <awilliam at whitemice.org> 
To: it at it.ramadaparkhotel.ch 
Cc: samba at lists.samba.org 
Sent: vendredi, 24. février 2006 00:16:52 
Subject: Re: [Samba] Problem with NTConfig.POL+SAMBA+LDAP 

> I installed two debian sarge servers with the following services: OPENLDAP, SAMBA 3.0, HEARTBEAT and DRBD. I used debian packages. 
> The RAID over IP is used for the /data and /home partitions. 
> I created a NTConfig.POL for my domain workstations and put it in /home/samba/netlogon. 
> But when a user log on a machine, the policy is not applied. 


https://bugzilla.samba.org/show_bug.cgi?id=3042