[Samba] samba as PDC with ldap

[Louis van Belle]

Hi rowland, 

tell me whats the problem, and i wil help you,
if there are errors in my howto i'll fix this, but.

The howto i wrote will work.
i installed 3 servers with this and its working
prefectly.

/etc/ldap/ldap conf to point to your server
>HOST 127.0.0.1
>BASE dc=<domainname>,dc=org or net or com or nothing(you do 
>not have to use the last part, you just have to be consistant)
 
This part, is done while you install the libnss-ldap and libpam-ldap
and the defaults of the slapd config are used and are corrected.

i think you edited this or already installed it.
If you use the debian standard setting it wil work.

Louis


>-----Oorspronkelijk bericht-----
>Van: samba-bounces+louis=van-belle.nl at lists.samba.org 
>[mailto:samba-bounces+louis=van-belle.nl at lists.samba.org] 
>Namens rowland penny
>Verzonden: zondag 19 februari 2006 13:01
>Aan: samba at lists.samba.org
>Onderwerp: [Samba] samba as PDC with ldap
>
>I have read louis`s howto from december, tried to use 
>kunbuntu, this failed at the ldap server test stage, tried 
>various things, could not make it work, so downloaded debian. 
>Followed louis`s howto and compiled a 2.6.8 kernel (louis, the 
>compile instructions do not work as given). 
>Followed the howto, downloaded samba etc, setup slapd etc as 
>per instructions and it failed again at the same place.
>So, I googled and found the the Linux Samba Openldap howto, 
>printed this and read it, thats where I found the answer to 
>the problem, Louis missed a bit, you have to edit 
>/etc/ldap/ldap conf to point to your server
>HOST 127.0.0.1
>BASE dc=<domainname>,dc=org or net or com or nothing(you do 
>not have to use the last part, you just have to be consistant)
>This is where I come to my next problem, I cannot get the 
>localsid. When I ask for it (net getlocalsid) I get this
>[2006/02/19 11:19:58,  0] 
>lib/smbldap.c:smb_ldap_start_tls(546)  Failed to issue the 
>StartTLS instruction: Connect error
>I have googled, found a few instances of this with earlier 
>versions of samba, so upgraded to 3.0.21b-1 from debian 
>testing, it still gives same answer, anybody have an answer please.
>-- 
>To unsubscribe from this list go to the following URL and read the
>instructions:  https://lists.samba.org/mailman/listinfo/samba
>