SOLVED Re: [Samba] Getting spnego error with 3.0.21pre11 with smbcacls

[Henrik Zagerholm]

Hi!
Just wanted to let you know that my problems with smbcacls has been  
solved after upgrading to 3.0.21-rc1.

Thanks a lot and good job!

Regards,
Henrik

21 okt 2005 kl. 19.26 skrev Henrik Zagerholm:

> Hi Jeremy!
>
> I'll do that. I guess it is only port 445 that si interesting for  
> you or?
>
> regards
> henrik
>
> 21 okt 2005 kl. 19.14 skrev Jeremy Allison:
>
>> On Fri, Oct 21, 2005 at 06:07:18PM +0200, Henrik Zagerholm wrote:
>>
>>> Hi all!
>>>
>>> Using smbcacls I can change OWNER of a remote file on a Win XP Pro
>>> Box but I can't delete or add ACL without getting SPNEGO errors.
>>> Error level 3 output attached:
>>> [henke at fedora henke]# smbcacls -D 'ACL:BBI-DEV\beakid:ALLOWED/
>>> 0/0x00100116' -U Admin%secret //192.168.1.124/Data 'Niva 1.txt' -d 3
>>>
>>> Connecting to host=192.168.1.124
>>> Connecting to 192.168.1.124 at port 445
>>> Doing spnego session setup (blob length=16)
>>> server didn't supply a full spnego negprot
>>> Got challenge flags:
>>> Got NTLMSSP neg_flags=0x628a0215
>>> NTLMSSP: Set final flags:
>>> Got NTLMSSP neg_flags=0x60080215
>>> NTLMSSP Sign/Seal - Initialising with flags:
>>> Got NTLMSSP neg_flags=0x60080215
>>> Connecting to host=192.168.1.124
>>> Connecting to 192.168.1.124 at port 445
>>> Doing spnego session setup (blob length=16)
>>> server didn't supply a full spnego negprot
>>> Got challenge flags:
>>> Got NTLMSSP neg_flags=0x628a0215
>>> NTLMSSP: Set final flags:
>>> Got NTLMSSP neg_flags=0x60080215
>>> NTLMSSP Sign/Seal - Initialising with flags:
>>> Got NTLMSSP neg_flags=0x60080215
>>> rpc_pipe_bind: Remote machine 192.168.1.124 pipe \lsarpc fnum 0x4000
>>> bind request returned ok.
>>> lsa_io_sec_qos: length c does not match size 8
>>> NT_TRANSACT_SET_SECURITY_DESC failed
>>> ERROR: secdesc set failed: NT_STATUS_ACCESS_DENIED
>>>
>>
>> Can you send me an ethereal capture trace of this
>> please ?
>>
>> Jeremy.
>>
>
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/listinfo/samba