RE [Samba] samba -cups

[spu at corman.be]

Your URI is incorrect if your printer is a network printer the correct URI
must be : lpd://myprinter

-----------------------------------
Stéphane PURNELLE                         stephane.purnelle at corman.be
Service Informatique       Corman S.A.           Tel : 00 32 087/342467

samba-bounces+stephane.purnelle=corman.be at lists.samba.org a écrit sur
19/01/2005 16:38:44 :

> hello
>
> I try to manage a printer (Apple Lawerwriter 16/600 ) with cups but
without
> succes !!!
>
> with cups web interface :
>
> I "add a printer":
> device = LPD/LPR Host or Printer
> URI= lpd://mymachine/lp
> Type= Apple
> Model = Apple LaserWriter16/600 Foomatic/Postscript (Recommended)(en)
>
> I try to print a testpage but without succes
>
> - 'mymachine' is either in my dns and my /etc/hosts file
> - no problem with " ping myprinter"
> - no problem with " telnet myprinter 515"
> - no problem with 'settings of myprinter"
>
>              LaserWriter 16/600 PS
>          TCP/IP Interface Information
>
>     Interface Status        : Ready
>     PostScript Banner Page  : Disabled
>     IP Address              : xxx.yyy.zzz.aa
>     Subnet Mask             : 255.255.255.0
>     Default Gateway         : xxx.yyy.zzz.bb
>     Timeout Checking        : Enabled
>     Ethernet Address        : 09:01:08:05:7D:99
>
> - but when I add myprinter and try to print a testpage, (loglevel debug
))
> I have :
> Remote host did not respond with command status byte after 300 seconds!
>
> is there someone to  help me?
> thanks
>
> gb.
>
> _________________________________________________________________
> MSN Hotmail : antivirus et antispam intégrés
> http://www.msn.fr/newhotmail/Default.asp?Ath=f
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/listinfo/samba