[Samba] Help with Samba 2.2.8.0 to 3.0.4.0

Rivera, Anthony R (OIT) Anthony.Rivera at ihs.gov
Tue Apr 26 22:17:50 GMT 2005


Hello. I'm trying to convert a Samba server from 2.2.8.0 on AIX 4.3.3 to
Samba Version 3.0.4.0 on AIX version 5.2.0. I have listed my smb.conf
file from the old version below and was hoping someone could point to
the changes I'll need to make on the newer version. Thanks so much

Right now, the users are verified against an NT Domain and I'd like to
keep it that way.

I really appreciate any advice

Tony
----------------------------------------------------------

<server> lib >cat smb.conf
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
"testparm"
# to check that you have not many any basic syntactic errors. 
#
#======================= Global Settings
=====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name
; workgroup = SUPPORT
; debug level = 10
; syslog = 0
   workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
   server string = Samba Server SERVER

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;  load printers = yes

# you may wish to override the location of the printcap file
;   printcap name = /etc/printcap

# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
;   printcap name = lpstat

# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
;   printing = bsd
printing = aix

# Uncomment this if you want a guest account, you must add this to
/etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest
;   guest account = nobody

# this tells Samba to use a separate log file for each machine
# that connects
   log file = /var/samba/log/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 50

# Security mode. Most people will want user level security. See
# security_level.txt for details.
;  security = user
;   security = share
 security = server
# Use password server option only with security = server
   password server = itscpdc

   allow trusted domains = yes

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
;  password level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
; encrypt passwords = yes
encrypt passwords = no

# If the following parameter is set to "yes" (it defaults to "no") and
# an smbpasswd file exists containing all the valid users of a Samba
system
# but no encrypted passwords (ie. the Lanman hash and NT hash entries in
the
# file are set to "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"), then as users log
in
# with plaintext passwords that are matched against their UNIX password
# entries, their plaintext passwords will be hashed and entered into the
# smbpasswd file.
# 
update encrypted = yes

# Unix users can map to different SMB User names
;  username map = /etc/smbusers
;  username map = /var/samba/users.map

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /usr/local/lib/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
   socket options = TCP_NODELAY 

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24 

# Configure remote browse list synchronisation here
#  request announcement to, or browse list sync from:
#       a specific host or from / to a whole subnet (see below)
;   remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
;   remote announce = 192.168.1.255 192.168.2.44

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes 

# Preferred Master causes Samba to force a local browser election on
startup
# and gives it a slightly higher chance of winning the election
;   preferred master = yes

# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
   domain controller = AYATOLAH

# Enable this if you want Samba to be a domain logon server for 
# Windows95 workstations. 
;   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS
Server
  wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#       Note: Samba can be either a WINS Server, or a WINS Client, but
NOT both
  wins server = 119.119.223.12

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one  WINS Server on the network. The default is NO.
   wins proxy = no

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
   dns proxy = no 

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
  preserve case = no
  short preserve case = no
# Default case is normally upper case for all DOS files
;  default case = lower
# Be very careful with case sensitivity - it can break things!
;  case sensitive = no

#============================ Share Definitions
==============================
[homes]
   comment = Home Directories
   browseable = no
   writable = yes

# Un-comment the following and create the netlogon directory for Domain
Logons
[netlogon]
  comment = Network Logon Service
  path = /usr/local/samba/lib/netlogon
  guest ok = no
  writable = no
  share modes = no

# NOTE: If you have a BSD-style print system there is no need to 
# specifically define each individual printer
[printers]
   comment = All Printers
;   path = /usr/spool/samba
   path = /tmp
   browseable = yes
# Set public = yes to allow user 'guest account' to print
   guest ok = yes
   writable = no
   printable = yes

[tmp]
   comment = Temporary file space
   path = /tmp
   read only = no
   public = no
   valid users = fred,steve,apu
   writable = yes
   printable = no 

[laguna]
  comment = Top Fuel- Authorized Only
  path = /topfuel
  read only = no
  public = no
  valid users = fred,jimbo,steve
  writable = yes
  printable = no

[db2]
  comment = DB2 Home Dir- DBAs only
  path = /usr/lpp/db2junk
  valid users = fred,jimbo
  writeable = yes
  printable = no

[home-server]
   comment = Home Directories
   path = /usr4/home
   public = no
   valid users = fred,jimbo
   writable = yes
   printable = no
   write list = @staff
 
<server> lib >


More information about the samba mailing list