[Samba] Problems compiling samba-3.0.7 on Redhat-7.2
Uli Menzebach
menze at vitesse.com
Wed Sep 22 22:18:15 GMT 2004
Thanks for the data point, Rahul.
I'll try to dive into the Makefile tomorrow to understand what's happening
here.
Do you think posting this to samba-technical might help ?
Uli
On Thu, 23 Sep 2004 rahul.padalikar at wipro.com wrote:
>
> Stéphane, Uli,
>
> I am able to reproduce this problem on RedHat-9. I was compiling samba 3.0.6 with the
>
> same setup and today when I replaced it with the 3.0.7, I started getting "undefined reference" messages for
>
> dlopen, dlclose and some DEBUG_CLASS also.
>
> I am using gcc-3.2.2.
>
> Regards,
>
> Rahul
>
>
> -----Original Message-----
> From: samba-bounces+rahul.padalikar=wipro.com at lists.samba.org on behalf of Uli Menzebach
> Sent: Wed 9/22/2004 1:18 PM
> To: samba at lists.samba.org
> Cc:
> Subject: Re: [Samba] Problems compiling samba-3.0.7 on Redhat-7.2
>
>
>
> Stéphane,
>
> thanks for your feedback.
>
> Actually the compiler versions are gcc-2.96 for RH-7.2 and gcc-2.95.3 for
> SuSE-7.3 .
>
> The warnings I get seem not to be the real problem.
>
> Getting the undefined references to `dlopen' &friends however puzzles me.
>
> Is there a way to make the command lines make uses to call gcc visible ?
> Then I could see whether libdl (-ldl) is actually in the command line.
>
> Thanks,
>
> Uli
>
>
>
>
> On Wed, 22 Sep 2004, Stéphane Purnelle wrote:
>
> > This is warning, but after compiltation samba 3.0.7 run succefully.
> > But samba 3.0.7 on redhat 8.0 have this warning too
> >
> > Maybe on older version of gcc ?
> >
> > Uli Menzebach a écrit :
> >
> > >Followup:
> > >I can reproduce the problem using just:
> > >
> > >./configure
> > >make
> > >
> > >on RH-7.2 and SuSE-7.3.
> > >
> > >NO problems on SusE-9.0 .
> > >
> > >Unfortunately I am bound to using RH-7.2 on the production server I need
> > >to install samba on.
> > >
> > >So if anyone succeded to build samba-3.0.7 (samba-2 builds w/o problems)
> > >on older distros like the above, is what I experience a known problem ?
> > >
> > >I have been building samba(-2) on Linux and Solaris for years without any
> > >hassles.
> > >
> > >Thanks,
> > >
> > > Uli
> > >
> > >
> > >
> > >
> > >On Tue, 21 Sep 2004, Johannes-Ulrich Menzebach wrote:
> > >
> > >
> > >
> > >>When compiling samba-3.0.7 on Redhat-7.2, stock kernel 2.4.26,
> > >>I get undefined references:
> > >>-------
> > >>Compiling libads/ads_status.c with -fPIC
> > >>Linking nsswitch/libnss_wins.so
> > >>lib/system.po: In function `sys_dlopen':
> > >>lib/system.po(.text+0xc17): undefined reference to `dlopen'
> > >>lib/system.po: In function `sys_dlsym':
> > >>lib/system.po(.text+0xc3b): undefined reference to `dlsym'
> > >>lib/system.po: In function `sys_dlclose':
> > >>lib/system.po(.text+0xc5c): undefined reference to `dlclose'
> > >>lib/system.po: In function `sys_dlerror':
> > >>lib/system.po(.text+0xc7a): undefined reference to `dlerror'
> > >>lib/username.po: In function `user_in_netgroup_list':
> > >>lib/username.po(.text+0xa47): undefined reference to `yp_get_default_domain'
> > >>lib/access.po: In function `string_match':
> > >>lib/access.po(.text+0x1d1): undefined reference to `yp_get_default_domain'
> > >>lib/util.po: In function `automount_lookup':
> > >>lib/util.po(.text+0x1eb9): undefined reference to `yp_get_default_domain'
> > >>lib/util.po(.text+0x1f01): undefined reference to `yperr_string'
> > >>lib/util.po(.text+0x1fb6): undefined reference to `yp_match'
> > >>lib/util.po(.text+0x20e7): undefined reference to `yperr_string'
> > >>Compiling nsswitch/pam_winbind.c with -fPIC
> > >>Linking nsswitch/pam_winbind.so
> > >>----------
> > >>and later:
> > >>----------
> > >>Linking libsmbclient non-shared library bin/libsmbclient.a
> > >>Linking libsmbclient shared library bin/libsmbclient.so
> > >>Compiling modules/vfs_recycle.c with -fPIC
> > >>Building plugin bin/recycle.so
> > >>modules/vfs_recycle.po: In function `recycle_connect':
> > >>modules/vfs_recycle.po(.text+0x17): undefined reference to `DEBUGLEVEL_CLASS'
> > >>modules/vfs_recycle.po(.text+0x31): undefined reference to `DEBUGLEVEL_CLASS_ISSET'
> > >>modules/vfs_recycle.po(.text+0x56): undefined reference to `dbghdr'
> > >>modules/vfs_recycle.po(.text+0x6c): undefined reference to `dbgtext'
> > >>modules/vfs_recycle.po: In function `recycle_disconnect':
> > >>modules/vfs_recycle.po(.text+0xa7): undefined reference to `DEBUGLEVEL_CLASS'
> > >>modules/vfs_recycle.po(.text+0xc1): undefined reference to `DEBUGLEVEL_CLASS_ISSET'
> > >>modules/vfs_recycle.po(.text+0xe6): undefined reference to `dbghdr'
> > >>modules/vfs_recycle.po(.text+0x102): undefined reference to `lp_servicename'
> > >>modules/vfs_recycle.po(.text+0x111): undefined reference to `dbgtext'
> > >>----------
> > >>and a lot more of these.
> > >>
> > >>My configure options:
> > >>./configure --prefix=/opt/samba --sysconfdir=/etc/samba --with-configdir=/etc/samba \
> > >>--with-privatedir=/etc/samba --with-lockdir=/var/cache/samba --with-piddir=/var/run/samba \
> > >>--with-automount --with-pam --with-msdfs --with-libsmbclient --with-smbmount --with-vfs \
> > >>--with-logfilebase=/var/log/samba --with-ldap --with-ads
> > >>
> > >>The general build environment should be ok on that box (compiled the kernel and other stuff).
> > >>
> > >>Any ideas and pointers are highly welcome.
> > >>
> > >>Thanks,
> > >>
> > >> Uli
> > >>
> > >>
> > >>
> > >>
> > >>--
> > >>+----------------------------------------------------------------------+
> > >>| Dr. Johannes-Ulrich Menzebach menze at vitesse.com |
> > >>| Vitesse Semiconductor GmbH & Co KG |
> > >>| D-47057 Duisburg Pappenstr. 36 Tel. +49/203/306-1765 |
> > >>| D-44149 Dortmund Borussiastr. 112 Tel. +49/231/6560-186 |
> > >>| Key fingerprint = A36C 9660 6A1C 91E6 051E DF1A 573A 770B DD66 9D9F |
> > >>+----------------------------------------------------------------------+
> > >>
> > >>--
> > >>To unsubscribe from this list go to the following URL and read the
> > >>instructions: http://lists.samba.org/mailman/listinfo/samba
> > >>
> > >>
> > >>
> >
> >
> > --
> > Stéphane Purnelle <stephane.purnelle at tiscali.be>
> > Site Web : http://www.linuxplusvalue.be
> >
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions: http://lists.samba.org/mailman/listinfo/samba
> >
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
>
>
>
>
>
> Confidentiality Notice
>
> The information contained in this electronic message and any attachments to this message are intended
> for the exclusive use of the addressee(s) and may contain confidential or privileged information. If
> you are not the intended recipient, please notify the sender at Wipro or Mailadmin at wipro.com immediately
> and destroy all copies of this message and any attachments.
>
More information about the samba
mailing list