[Samba] Windows XP Pro and Samba (file saving)
Ryan Novosielski
novosirj at umdnj.edu
Wed May 12 08:21:25 GMT 2004
Ummmm, is it just me or did you not ask a question?
---- _ _ _ _ ___ _ _ _
|Y#| | | |\/| | \ |\ | | | Ryan Novosielski - Jr. UNIX Systems Admin
|$&| |__| | | |__/ | \| _| | novosirj at umdnj.edu - 973/972.0922 (2-0922)
\__/ Univ. of Med. and Dent. | IST/ACS - NJMS Medical Science Bldg - C630
On Sun, 9 May 2004, Jason Oakley wrote:
> No ideas then anyone?
> -----------------------
>
> Couldn't get the password sync to work with the unix passwords, so created
> them by hand.
>
> Logon script:
> C:\Windows\logon.bat
>
> @Echo off
> \\spooty\waulok\logon.bat
>
>
> $ cat logon.bat
> @Echo off
> if not exist s: net use s: \\spooty\shared
> if not exist m: net use m: \\spooty\mp3z
> if not exist u: net use u: \\spooty\waulok
> if not exist w: net use w: \\spooty\webcam
> net time \\spooty /set /yes
>
>
> # This is the main Samba configuration file. You should read the
> # smb.conf(5) manual page in order to understand the options listed
> # here. Samba has a huge number of configurable options (perhaps too
> # many!) most of which are not shown in this example
> #
> # Any line which starts with a ; (semi-colon) or a # (hash)
> # is a comment and is ignored. In this example we will use a #
> # for commentry and a ; for parts of the config file that you
> # may wish to enable
> #
> # NOTE: Whenever you modify this file you should run the command "testparm"
> # to check that you have not many any basic syntactic errors.
> #
> #======================= Global Settings =====================================
> [global]
>
> # workgroup = NT-Domain-Name or Workgroup-Name, eg: REDHAT4
> workgroup = thematrix
>
> # server string is the equivalent of the NT Description field
> server string = Inside The Matrix
> netbios name = spooty
>
> nt acl support = no
>
> # This option is important for security. It allows you to restrict
> # connections to machines which are on your local network. The
> # following example restricts access to two C class networks and
> # the "loopback" interface. For more examples of the syntax see
> # the smb.conf man page
> ; hosts allow = 192.168.1. 192.168.2. 127.
> hosts allow = 192.168.0. 127.
>
> # If you want to automatically load your printer list rather
> # than setting them up individually then you'll need this
> load printers = yes
>
> # you may wish to override the location of the printcap file
> ; printcap name = /etc/printcap
>
> # on SystemV system setting printcap name to lpstat should allow
> # you to automatically obtain a printer list from the SystemV spool
> # system
> ; printcap name = lpstat
>
> # It should not be necessary to specify the print system type unless
> # it is non-standard. Currently supported print systems include:
> # bsd, sysv, plp, lprng, aix, hpux, qnx
> ; printing = bsd
>
> # Uncomment this if you want a guest account, you must add this to /etc/passwd
> # otherwise the user "nobody" is used
> ; guest account = pcguest
>
> # this tells Samba to use a separate log file for each machine
> # that connects
> log file = /var/log/samba/log.%m
>
> syslog = 0
> # Put a capping on the size of the log files (in Kb).
> max log size = 50
>
> # Some tweaks to speed it up (hopefully)
> getwd cache = yes
> read raw = no
> log level = 1
> write raw = no
> case sensitive = no
> preserve case = yes
> short preserve case = yes
> mangled names = no
>
>
>
> # Security mode. Most people will want user level security. See
> # security_level.txt for details.
> security = user
>
> # Use password server option only with security = server
> # The argument list may include:
> # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
> # or to auto-locate the domain controller/s
> # password server = *
> ; password server = <NT-Server-Name>
>
> # Note: Do NOT use the now deprecated option of "domain controller"
> # This option is no longer implemented.
>
> # You may wish to use password encryption. Please read
> # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
> # Do not enable this option unless you have read those documents
> encrypt passwords = yes
> update encrypted = yes
> unix password sync = yes
> passwd program = /usr/bin/passwd
>
> # Using the following line enables you to customise your configuration
> # on a per machine basis. The %m gets replaced with the netbios name
> # of the machine that is connecting
> ; include = /usr/local/etc/smb.conf.%m
>
> # Most people will find that this option gives better performance.
> # See speed.txt and the manual pages for details
> # You may want to add the following on a Linux system:
> # SO_RCVBUF=8192 SO_SNDBUF=8192
> socket options = TCP_NODELAY IPTOS_THROUGHPUT SO_RCVBUF=8192 SO_SNDBUF=8192
>
> # Configure Samba to use multiple interfaces
> # If you have multiple network interfaces then you must list them
> # here. See the man page for details.
> ; interfaces = 192.168.12.2/24 192.168.13.2/24
> interfaces = 192.168.0.2
>
> # Browser Control Options:
> # set local master to no if you don't want Samba to become a master
> # browser on your network. Otherwise the normal election rules apply
> ; local master = no
>
> # OS Level determines the precedence of this server in master browser
> # elections. The default value should be reasonable
> ; os level = 33
>
> # Domain Master specifies Samba to be the Domain Master Browser. This
> # allows Samba to collate browse lists between subnets. Don't use this
> # if you already have a Windows NT domain controller doing this job
> domain master = yes
>
> # Preferred Master causes Samba to force a local browser election on startup
> # and gives it a slightly higher chance of winning the election
> preferred master = yes
>
> # Enable this if you want Samba to be a domain logon server for
> # Windows95 workstations.
> domain logons = yes
>
> # if you enable domain logons then you may want a per-machine or
> # per user logon script
> # run a specific logon batch file per workstation (machine)
> ; logon script = %m.bat
> # run a specific logon batch file per username
> ; logon script = %U.bat
>
> # Where to store roving profiles (only for Win95 and WinNT)
> # %L substitutes for this servers netbios name, %U is username
> # You must uncomment the [Profiles] share below
> ; logon path = \\%L\Profiles\%U
>
> # Windows Internet Name Serving Support Section:
> # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
> ; wins support = yes
>
> # WINS Server - Tells the NMBD components of Samba to be a WINS Client
> # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
> ; wins server = w.x.y.z
>
> # WINS Proxy - Tells Samba to answer name resolution queries on
> # behalf of a non WINS capable client, for this to work there must be
> # at least one WINS Server on the network. The default is NO.
> ; wins proxy = yes
>
> # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
> # via DNS nslookups. The built-in default for versions 1.9.17 is yes,
> # this has been changed in version 1.9.18 to no.
> dns proxy = no
>
> # Client codepage settings
>
> # for Greek users
> ; client code page=737
>
> # for European users (Latin 1)
> ; client code page=850
>
> # for European users (Latin 2)
> ; client code page=852
>
> # for Icelandic users
> ; client code page=861
>
> # for Cyrillic users
> ; client code page=866
>
> # for Japanese Users
> ; client code page=932
> ; coding system=cap
>
> # for Simplified Chinese Users
> ; client code page=936
> ; coding system=cap
>
> # for Korean Users
> ; client code page=949
> ; coding system=cap
>
> # for Traditional Chinese Users
> ; client code page=950
> ; coding system=cap
>
> #============================ Share Definitions ==============================
> [homes]
> comment = Home Directories
> browseable = no
> writeable = yes
> # Un-comment the following two lines to add a recycle bin facility to a
> samba share
> # NOTE: It currently doesn't work with the [homes] virtual share, use a
> regular share instead
> ; vfs object = /usr/local/lib/samba/recycle.so
> ; vfs options= recycle=.recycle
>
> # Un-comment the following and create the netlogon directory for Domain Logons
> [netlogon]
> comment = Network Logon Service
> path = /home/globalshare/netlogon/logon.bat
> guest ok = yes
> writeable = no
> share modes = no
>
>
> # Un-comment the following to provide a specific roving profile share
> # the default is to use the user's home directory
> ;[Profiles]
> ; path = /usr/local/samba/profiles
> ; browseable = no
> ; guest ok = yes
>
>
> # NOTE: If you have a BSD-style print system there is no need to
> # specifically define each individual printer
> [printers]
> comment = All Printers
> path = /var/spool/samba
> browseable = no
> # Set public = yes to allow user 'guest account' to print
> guest ok = no
> writeable = no
> printable = yes
>
> # This one is useful for people to share files
> ;[tmp]
> ; comment = Temporary file space
> ; path = /tmp
> ; read only = no
> ; public = yes
>
> # A publicly accessible directory, but read only, except for people in
> # the "staff" group
> ;[public]
> ; comment = Public Stuff
> ; path = /home/samba
> ; public = yes
> ; writeable = yes
> ; printable = no
> ; write list = @staff
>
> # Other examples.
> #
> # A private printer, usable only by fred. Spool data will be placed in fred's
> # home directory. Note that fred must have write access to the spool directory,
> # wherever it is.
> ;[fredsprn]
> ; comment = Fred's Printer
> ; valid users = fred
> ; path = /homes/fred
> ; printer = freds_printer
> ; public = no
> ; writeable = no
> ; printable = yes
>
> # A private directory, usable only by fred. Note that fred requires write
> # access to the directory.
> ;[fredsdir]
> ; comment = Fred's Service
> ; path = /usr/somewhere/private
> ; valid users = fred
> ; public = no
> ; writeable = yes
> ; printable = no
>
> # a service which has a different directory for each machine that connects
> # this allows you to tailor configurations to incoming machines. You could
> # also use the %U option to tailor it by user name.
> # The %m gets replaced with the machine name that is connecting.
> ;[pchome]
> ; comment = PC Directories
> ; path = /usr/pc/%m
> ; public = no
> ; writeable = yes
>
> # A publicly accessible directory, read/write to all users. Note that all files
> # created in the directory by users will be owned by the default user, so
> # any user with access can delete any other user's files. Obviously this
> # directory must be writeable by the default user. Another user could of course
> # be specified, in which case all files would be owned by that user instead.
> ;[public]
> ; path = /usr/somewhere/else/public
> ; public = yes
> ; only guest = yes
> ; writeable = yes
> ; printable = no
> # Un-comment the following two lines to add a recycle bin facility to a
> samba share
> ; vfs object = /usr/local/lib/samba/recycle.so
> ; vfs options= recycle=.recycle
>
> # The following two entries demonstrate how to share a directory so that two
> # users can place files there that will be owned by the specific users. In this
> # setup, the directory should be writeable by both users and should have the
> # sticky bit set on it to prevent abuse. Obviously this could be extended to
> # as many users as required.
> ;[myshare]
> ; comment = Mary's and Fred's stuff
> ; path = /usr/somewhere/shared
> ; valid users = mary fred
> ; public = no
> ; writeable = yes
> ; printable = no
> ; create mask = 0765
>
>
> [tmp]
> comment = Temporary file space
> path = /tmp
> read only = no
> public = yes
>
> [cdrom]
> comment = CDROM Drive
> path = /cdrom
> read only = no
> public = yes
>
> [shared]
> comment = Storage for everyone
> path = /home/globalshare
> read only = no
> public = yes
> browseable = yes
> create mask = 0775
> directory security mask = 0775
> force directory mode = 0775
>
> [mp3z]
> comment = Shared MP3 Folder
> path = /home/globalshare/mp3z
> read only = no
> public = yes
> browseable = yes
> create mask = 0775
> directory security mask = 0775
> force directory mode = 0775
>
> [webcam]
> comment = Webcam folder
> path = /home/apache/webcam
> read only = no
> public = yes
> browseable = yes
> create mask = 0775
> directory security mask = 0775
> force directory mode = 0775
>
>
>
> At 10:27 AM 1/05/2004 -0400, you wrote:
> >I don't think you are behind. I went from 2.28a to 3.02a and now back to
> >2.28a. I was having too many problems.
> >
> >I had the same problem, so I unmounted the drive remounted the drive to a
> >different letter and it worked. Make sure the drive you are trying to
> >access is mounted on your PC and that you are include as valid users = who
> >or ip address, read only = no, check the permissions on the folder also
> >
> >Matt
>
> ------------------------------------------------------------------------------------
> http://www.bangrocks.com/ - http://www.auspug.org/ -
> http://geocaching.bangrocks.com
> http://zigzag.bangrocks.com/ - PalmOS Software and "Palm Games Programming"
> forum
>
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
>
More information about the samba
mailing list