[Samba] Re: [fwd: [Fwd: Re: network response] ]

[Jeremy Allison]

On Tue, Jun 29, 2004 at 05:16:24PM -0500, Chris Garrigues wrote:
> > From:  Jeremy Allison <jra at samba.org>
> > Date:  Tue, 29 Jun 2004 14:47:34 -0700
> >
> > The strange thing is the Oplock value of none here....
> > 
> > Are you sure you have kernel oplocks set to no ? Use testparm to
> > be sure and ensure you've restarted smbd or it won't take effect.
> 
> hmmm..... what does this mean:
> 
> Load smb config files from /etc/samba3/smb.conf
> Processing section "[homes]"
> Processing section "[netlogon]"
> Processing section "[profiles]"
> Processing section "[groups]"
> Processing section "[InterChk]"
> Processing section "[local-soft]"
> Processing section "[pointmeridian]"
> Processing section "[print$]"
> Processing section "[software]"
> Processing section "[lp1]"
> Loaded services file OK.
> WARNING: You have some share names that are longer than 12 characters.
> These may not be accessible to some older clients.
> (Eg. Windows9x, WindowsMe, and smbclient prior to Samba 3.0.)
> Invalid combination of parameters for service netlogon.                    Level II oplocks can only be set if oplocks are also set.
> Invalid combination of parameters for service profiles.                    Level II oplocks can only be set if oplocks are also set.
> Invalid combination of parameters for service groups.                      Level II oplocks can only be set if oplocks are also set.
> Invalid combination of parameters for service InterChk.                    Level II oplocks can only be set if oplocks are also set.
> Invalid combination of parameters for service local-soft.                  Level II oplocks can only be set if oplocks are also set.
> Invalid combination of parameters for service pointmeridian.               Level II oplocks can only be set if oplocks are also set.
> Invalid combination of parameters for service print$.                      Level II oplocks can only be set if oplocks are also set.
> Invalid combination of parameters for service lp1.                         Level II oplocks can only be set if oplocks are also set.
> Server role: ROLE_DOMAIN_PDC
> Press enter to see a dump of your service definitions

It just means whenever you turn oplocks off and don't turn off level 2 
oplocks you've got an invalid combo. Doesn't hurt.