[Samba] "No locking available. Running Samba would be unsafe"

[eric roseme]

Hi Bill,

I am not sure if this is your problem, but 2.2 will take about 20 locks 
per client connection, so you will run out of locks at 10 connections 
with nflocks set at 200.  You will need to bump that up, along with 
nfiles and nproc.

Of course, you should not be on 10.20, or 2.2.0, but I suppose you know 
that.

Eric Roseme
Hewlett-Packard

Bill S wrote:

> Eric,
> 
> Thanks for your response. Here are some answers to your questions.
> 1- HPUX 10.20
> 2- Samba 2.2.0
> 3- nflocks = 200
> 4- There is no testparm command. I checked samba's source/bin
>    directory and the only command there was .cvsignore. On my
>    system the testparm and other commands, like smbd,nmbd and
>    smbclient, were in the bin directory. 
> 
> - Bill
> 
> -----Original Message-----
> From: eric roseme [mailto:eroseme at emonster.rose.hp.com] 
> Sent: Tuesday, December 14, 2004 8:27 AM
> To: bspicuzza at dsbsi.com
> Cc: samba at lists.samba.org
> Subject: Re: [Samba] "No locking available. Running Samba would be unsafe"
> 
> 1.  What version of HP-UX?
> 2.  What version of Samba (or HP CIFS Server)?
> 3.  What is nflocks set to?
> 4.  Do a "testparm | grep lock" and send in the results.
> 
> Eric Roseme
> Hewlett-Packard
> 
> Bill S wrote:
> 
>>Hello Samba folks,
>> 
>>    A couple years ago I installed Samba 2.2.0 on our HP9000 running 
>>hpux 10.20.
>>I am now trying to install it on a customer's HP9000 and am getting 
>>the error "No locking available. Running Samba would be unsafe" while 
>>executing the configure command. I got that error a couple years ago 
>>and resolved it by linking /usr/bin/cc and /opt/ansic/bin/cc but that 
>>is not working this time.
>>I also
>>tried linking /usr/bin/cc and /usr/ccs/bin/cc but that did not work
> 
> either.
> 
>>Any
>>ideas?
>> 
>>- Bill
> 
>