[Samba] Re: issue with running samba on two separate systems under 1 hostname

[Tom Ryan]

ok.. at this point, I think I have 0 issues EXCEPT constant corruption of
my printing TDBs.. is there anyway to cut down on this/prevent this?

should I upgrade my samba beyond the RHEL provided one?

Tom

On Wed, 25 Aug 2004, Tom Ryan wrote:

> I have a read only share and a couple of printers exported that I would
> like to be available under a single hostname.
>
> to that end, I have a created a hostname that refers to two ip addresses,
> each being a separate machine.
>
> I have configured samba identically on each system and everything appears
> to work ok for a little while until our printing tdb becomes corrupted and
> everything hangs up.. (at least the printing).. deleting the tdbs and
> restarting samba appears to correct the issue until the next hang..
>
> this is samba-3.0.4-6.3E (yep on RHEL 3).
>
> is there anything else I should be doing or am I at this point, "stuck"..
>
> Tom
>
> p.s. for what its worth, I can't get both machines to register (of course)
> under the same netbios name, but I'm not sure thats an issue..
>

_______________________________________________________________________
Tom Ryan                                            Voice: 856-225-6361
Consulting System Administrator                       Fax: 856-969-7900
Rutgers School of Law - Camden               IT Help Desk: 856-225-2343