[Samba] Solution?: Building Samba 3.0.5 on HP-UX 11.11
topher
findtopher at gmail.com
Mon Aug 2 22:09:21 GMT 2004
It's ENTIRELY possible that having the HP ANSI/C compiler will resolve
this issue as well -- but the ONLY reason for that compiler that we've
found so far is for 'samba' -- so I'm not able to justify the expense
(I never even bothered to check, but I assume there is an expense
associated with it)
we built using the gcc 3.3.2 compiler from the HP Porting site on the
TCOE environment -- so my 'theory' would be that the libraries that
are munged (and there are most certainly munged libraries in the plain
OE environment) are 'fixed' in the two configurations we've discussed
(ANSI C compiler from HP, or TCOE environment)
so it would appear that these two solutions work....
On Thu, 29 Jul 2004 16:44:02 -0400 (EDT), Ryan Novosielski
<novosirj at umdnj.edu> wrote:
> Even with HP-AnsiC? I don't have this kind of problem. I have been
> building Samba for years with the HP compilers. There is the occasional
> snafu (Ying Li's patch does solve the problem however), but it generally
> works. I don't believe I have this TCOE environment.
>
> ---- _ _ _ _ ___ _ _ _
> |Y#| | | |\/| | \ |\ | | | Ryan Novosielski - Jr. UNIX Systems Admin
> |$&| |__| | | |__/ | \| _| | novosirj at umdnj.edu - 973/972.0922 (2-0922)
> \__/ Univ. of Med. and Dent. | IST/ACS - NJMS Medical Science Bldg - C630
>
>
>
> On Thu, 29 Jul 2004, topher wrote:
>
> > well -- after MUCH messing about, and traipsing through the source
> > code, and traversing through the configure scripts -- and tracking
> > down libraries and library dependencies -- and header files... (you
> > get the general idea here) --
> >
> > rebuild a server to test a theory, and it appears to hold true -- if
> > you install the 'regular' Operating Environment Component, there are
> > actually libraries around that are totally botched and messed up --
> > all kinds of flaws in them... swlist HPUX11i-OE will tell you if you
> > have this configuration -- if it comes back with information, that's
> > what you have installed, and you're kinda up a tree...
> >
> > IF, however, you installed the HP-UX Technical Computing OE Component
> > (HPUX11i-TCOE) those libraries are fixed -- and you are able to
> > configure, make, and make install HP with no problems... (until you
> > try to access the IPC$ share on the HP host with a Mac OS X system,
> > then you get problems, but you can map directly to the specific share
> > without any problems at all.. go figure) --
> >
> > SO -- if you can get your hands on a TCOE system, you can run
> > 'configure --disable-shared --enable-statid' and then you can port
> > your /usr/local/samba directory around to the various other servers --
> > it appears to be stable thus far, and I'm just gonna keep my fingers
> > crossed
> >
> > no -- I don't have any clue how you get from OE to TCOE without
> > re-installing -- sorry for that one...
> >
> > later all!
> >
> > toph
> >
> >
> > ---------- Forwarded message ----------
> > From: topher <findtopher at gmail.com>
> > Date: Wed, 28 Jul 2004 13:32:25 -0400
> > Subject: Fwd: Building Samba 3.0.5 on HP-UX 11.11
> > To: samba at lists.samba.org
> >
> > got a couple of requests for further information -- so here's an update:
> >
> > yes, I've done the configure and make as root and as a regular user,
> > things die with either compiler in the same place I'm afraid
> >
> > yes, I've run 'autoconf' before running configure, and the only
> > difference I've seen is that the errors during configure get more
> > 'stuff' wrapped around them to make them more apparent... the errors
> > in the log are the same --
> >
> > here is the exact error message I get during make using gcc:
> >
> > Compiling dynconfig.c
> > In file included from include/includes.h:109,
> > from dynconfig.c:21:
> > /usr/include/sys/socket.h:484: error: parse error before "sendfile"
> > /usr/include/sys/socket.h:484: error: parse error before "bsize_t"
> > /usr/include/sys/socket.h:486: error: parse error before "sendpath"
> > /usr/include/sys/socket.h:486: error: parse error before "bsize_t"
> > /usr/include/sys/socket.h:493: error: parse error before "sendfile64"
> > /usr/include/sys/socket.h:493: error: parse error before "bsize64_t"
> > /usr/include/sys/socket.h:495: error: parse error before "sendpath64"
> > /usr/include/sys/socket.h:495: error: parse error before "bsize64_t"
> > In file included from /usr/include/sys/mp.h:55,
> > from /usr/include/sys/malloc.h:59,
> > from /usr/include/net/netmp.h:53,
> > from /usr/include/net/if.h:59,
> > from include/includes.h:275,
> > from dynconfig.c:21:
> > /usr/include/machine/sys/setjmp.h:45: error: redefinition of `struct label_t'
> > In file included from dynconfig.c:21:
> > include/includes.h:495: error: conflicting types for `socklen_t'
> > /usr/include/sys/socket.h:199: error: previous declaration of `socklen_t'
> > make: *** [dynconfig.o] Error 1
> >
> > any other thoughts/suggestions are appreciated and MORE than welcome!
> >
> > toph
> >
> >
> >
> > ---------- Forwarded message ----------
> > From: topher <findtopher at gmail.com>
> > Date: Wed, 28 Jul 2004 09:32:06 -0400
> > Subject: Building Samba 3.0.5 on HP-UX 11.11
> > To: samba at lists.samba.org
> >
> > First -- to avoid the common answers to the 'building on HP-UX'
> > questions that seem to be available on the list and the web:
> >
> > 1) using the depot from the Porting Center won't work, it's well
> > downrev of 3.0.5 and I need to get the new security fixes (so that the
> > security team will go back into it's dark dank den and fear not for
> > the security of our environment)
> >
> > 2) samba.org only has a 3.0.4a binary package for HP-UX -- so again,
> > no security fixes
> >
> > as such, I'm trying to build 3.0.5 on HP-UX 11.11 -- and I'm running
> > into the same problem I pretty much always seem to run into:
> >
> > if I use gcc (gcc 3.3.2 off the porting center), configure runs
> > through with several errors that look like:
> >
> > configure: WARNING: foo/bar.h: present but cannot be compiled
> > configure: WARNING: foo/bar.h: check for missing prerequisite headers?
> > configure: WARNING: foo/bar.h: proceeding with the preprocessor's result
> >
> > where foo and bar are any of about a dozen different headers... I
> > suspect that if I could find a solution to this one, then I'd be able
> > to get somewhere -- the configure.log shows that the problem with the
> > headers is:
> >
> > configure:9644: gcc -c -O -D_HPUX_SOURCE -D_POSIX_SOURCE -D_LARGEFILE64_SOURCE
> > -D_ALIGNMENT_REQUIRED=1 -D_MAX_ALIGNMENT=4 -DMAX_POSITIVE_LOCK_OFFSET=0x1ffffff
> > ffffLL conftest.c >&5
> > In file included from configure:9622:
> > /usr/include/sys/socket.h:484: error: parse error before "sendfile"
> > /usr/include/sys/socket.h:484: error: parse error before "bsize_t"
> > /usr/include/sys/socket.h:486: error: parse error before "sendpath"
> > /usr/include/sys/socket.h:486: error: parse error before "bsize_t"
> > /usr/include/sys/socket.h:493: error: parse error before "sendfile64"
> > /usr/include/sys/socket.h:493: error: parse error before "bsize64_t"
> > /usr/include/sys/socket.h:495: error: parse error before "sendpath64"
> > /usr/include/sys/socket.h:495: error: parse error before "bsize64_t"
> > configure:9647: $? = 1
> > configure: failed program was:
> > #line 9617 "configure"
> >
> > (that's just one instance of the headers failing -- if you want more,
> > lemme know and I'll make a big list for ya -- this error is also the
> > error I get if I run a make, and things go downhill from there...)
> >
> > I read in one posting that you can't use the gcc compiler, but you
> > have to use the cc that comes with HP (course I read in another post
> > that you have to use an ANSI compiler, so you have to use gcc and
> > can't use the cc that comes with HP -- but I digress) -- so another
> > configure is run (on a whole new set of the source code to prevent any
> > confusion) -- but this time I use:
> >
> > CC=/usr/ccs/bin/cc ./configure
> >
> > which appears to work, as the first line of output is:
> > checking for gcc... /usr/ccs/bin/cc
> >
> > and the configure goes on from there, right up until:
> >
> > Using libraries:
> > LIBS = -lgen -lsec -lnsl
> > AUTH_LIBS =
> > checking configure summary... WARNING: No automated network interface
> > determination
> > ERROR: no seteuid method available
> > configure: error: summary failure. Aborting config
> >
> > it seems like it gets 'so close', as this appears to about 20 lines
> > short of the 'successful' configure using 'gcc'
> >
> > Please -- any help would be much appreciated -- I'm just about willing
> > to try anything to get the security gorillas off my back -- I've got
> > this build working on AIX 5.1 and 5.2 and Sun 8 and 9 -- it's just
> > this silly HP thing that I can't get finished... I'm begging here --
> > please help!
> >
> > <grin>
> >
> > toph
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions: http://lists.samba.org/mailman/listinfo/samba
> >
>
More information about the samba
mailing list