[Samba] Can not connect to SWAT
lovswr1
lovswr1 at earthlink.net
Sun Nov 9 17:22:51 GMT 2003
On Sat, 2003-11-08 at 16:56, lovswr1 wrote:
> On Sat, 2003-11-08 at 13:09, John H Terpstra wrote:
> > On Sat, 8 Nov 2003, lovswr1 wrote:
> >
> > > Hello, Until yesterday (7 nov 03) I had a mostly working 2.27 samba
> > > running on my redhat 9 box that I configured via SWAT. Now I can not get
> > > back into SWAT & I also (in a useless attempt to make it work) upgraded
> > > to samba 3.0 I get the following when trying to start SWAT:
> > >
> > >
> > > An error occured while loading http://matrix1:901/:
> > >
> > >
> > > Could not connect to host matrix1 (port 901)
> > >
> > >
> > >
> > > here is my /etc/hosts file:
> > >
> > >
> > > # Do not remove the following line, or various programs
> > > # that require network functionality will fail.
> > > 127.0.0.1 localhost localhost.localdomain matrix1
> > > 192.168.2.147 philip
> > > 192.168.2.145 robert
> > > 192.168.1.148 pc2
> > > 192.168.1.149 freebsd
> > > 0.0.0.0 ads.osdn.com
> > > 0.0.0.0 claria.com
> > > 0.0.0.0 www.gator.com
> > >
> > >
> > > Also /etc/services does have the correct port 901 set up &
> > > /etc/xinetd/d/swat
> > >
> > > description: swat is the Samba Web Administration Tool, which
> > > # allows an administrator to configure Samba using a web
> > > # browser interface, with the URL http://localhost:901
> > > service swat.
> > > {
> > > disable = no
> > > socket_type = stream
> > > wait = no
> > > protocol = tcp
> > > only_from = matrix1
> >
> > Try:
> > only_from = localhost
> >
> > - John T.
>
> Thanks John, but I'm still getting that can not connect host error
woohooo I got SWAT working again...it was syntax. in my /etc/services i
had swat. (the period was there & of course everything else was just
looking for the four letters)
>
>
> >
> > > user = root
> > > log_on_failure += USERID
> > > server = /usr/sbin/swat
> > > port = 901
> > > }
> > > & /etc/pam.d/samba
> > >
> > > #%PAM-1.0
> > > auth required pam_nologin.so
> > > auth required pam_stack.so service=system-auth
> > > account required pam_stack.so service=system-auth
> > > session required pam_stack.so service=system-auth
> > > password required pam_stack.so service=system-auth
> > > # added by me in a panic attempt to get swat working again on 7 nov 03
> > > samba auth required /lib/security/pam_pwdb.so nullok shadow
> > > samba account required /lib/security/pam_pwdb.so
> > >
> > >
> > > I dont't know if this is related but,my trouble started yesterday after
> > > I actually got vnc-server working. I just left it at default so it
> > > started on matrix1:1 I went to work (yes I puched a hole through
> > > turtlefirewall just for this) & connected from my laptop at work via vnc
> > > to the redhat box. I did not do anything & then jsut logged off. when I
> > > got home I had to reboot the redhat box becuase konq would not work.
> > > Kept complaing aobut something like the DHOCP server or other could not
> > > be contactacted/(connected?). Well SWAT has not worked ever since. Now
> > > the samba 2.7 still worked with a manual start, but this morning I did a
> > > rpm -U| to 3.0 & now that too is not working Any help ir direction
> > > pointing would be greatly appreciated.
> > >
> > >
More information about the samba
mailing list