[Samba] Can not connect to SWAT
John H Terpstra
jht at samba.org
Sat Nov 8 18:09:52 GMT 2003
On Sat, 8 Nov 2003, lovswr1 wrote:
> Hello, Until yesterday (7 nov 03) I had a mostly working 2.27 samba
> running on my redhat 9 box that I configured via SWAT. Now I can not get
> back into SWAT & I also (in a useless attempt to make it work) upgraded
> to samba 3.0 I get the following when trying to start SWAT:
>
>
> An error occured while loading http://matrix1:901/:
>
>
> Could not connect to host matrix1 (port 901)
>
>
>
> here is my /etc/hosts file:
>
>
> # Do not remove the following line, or various programs
> # that require network functionality will fail.
> 127.0.0.1 localhost localhost.localdomain matrix1
> 192.168.2.147 philip
> 192.168.2.145 robert
> 192.168.1.148 pc2
> 192.168.1.149 freebsd
> 0.0.0.0 ads.osdn.com
> 0.0.0.0 claria.com
> 0.0.0.0 www.gator.com
>
>
> Also /etc/services does have the correct port 901 set up &
> /etc/xinetd/d/swat
>
> description: swat is the Samba Web Administration Tool, which
> # allows an administrator to configure Samba using a web
> # browser interface, with the URL http://localhost:901
> service swat.
> {
> disable = no
> socket_type = stream
> wait = no
> protocol = tcp
> only_from = matrix1
Try:
only_from = localhost
- John T.
> user = root
> log_on_failure += USERID
> server = /usr/sbin/swat
> port = 901
> }
> & /etc/pam.d/samba
>
> #%PAM-1.0
> auth required pam_nologin.so
> auth required pam_stack.so service=system-auth
> account required pam_stack.so service=system-auth
> session required pam_stack.so service=system-auth
> password required pam_stack.so service=system-auth
> # added by me in a panic attempt to get swat working again on 7 nov 03
> samba auth required /lib/security/pam_pwdb.so nullok shadow
> samba account required /lib/security/pam_pwdb.so
>
>
> I dont't know if this is related but,my trouble started yesterday after
> I actually got vnc-server working. I just left it at default so it
> started on matrix1:1 I went to work (yes I puched a hole through
> turtlefirewall just for this) & connected from my laptop at work via vnc
> to the redhat box. I did not do anything & then jsut logged off. when I
> got home I had to reboot the redhat box becuase konq would not work.
> Kept complaing aobut something like the DHOCP server or other could not
> be contactacted/(connected?). Well SWAT has not worked ever since. Now
> the samba 2.7 still worked with a manual start, but this morning I did a
> rpm -U| to 3.0 & now that too is not working Any help ir direction
> pointing would be greatly appreciated.
>
>
--
John H Terpstra
Email: jht at samba.org
More information about the samba
mailing list