[Samba] Samba and Actionlaser 1500

Kevin Smith ksmith at perfht.com
Tue May 6 13:11:25 GMT 2003

I only use cups due to the web interface, Does LPRing have anything similar?
I may go back just to get it working.
-----Original Message-----
From: samba-bounces+jkajau=ziscosteel.co.zw at lists.samba.org
[mailto:samba-bounces+jkajau=ziscosteel.co.zw at lists.samba.org]On Behalf
Of Bob Sully
Sent: Monday, May 05, 2003 14:31
To: Kevin Smith
Cc: Samba
Subject: Re: [Samba] Samba and Actionlaser 1500

I have one working fine with RH 7.3, Linus kernel 2.4.20, Samba 2.2.7a,
but am using LPRng, not CUPS.  I believe I set it to use the
ActionLaser 1100 or the HP Laserjet III driver, will have to ssh in and
check which.  I use it as my main network printer, and it works great
with all the Windoze and Linux boxen on two networks.


On Mon, 5 May 2003, Kevin Smith wrote:

> Has anyone gotten this printer to work with Redhat/Samba?
> My system is RH 7.2 , Kernel 2.4.20, samba 1.2.7a.
> Sometimes, VIA CUPS, it will print a test sheet, but I cant seem to get it
> to work locally with a raw queue.
> I've tried Foomatic but it just messed up my printer database so I
> reinstalled printconf,
> Linuxprinter.org says it is partially compatible with the omni driver,
> I have installed, with no results or error messages In /var/log/messages
> //var/log/cups/error_log.
> SO if anyone has any tips on how to get this printer working on a Linux
> server with windows 98 clients (with the proper drivers) please let me
> what you did.
> Thanks,
> Kev

Bob Sully - Simi Valley, California, USA

"The waiting is the hardest part." - T. Petty

To unsubscribe from this list go to the following URL and read the
instructions:  http://lists.samba.org/mailman/listinfo/samba

More information about the samba mailing list