[Samba] smaba 3.0 - domain groups : OS info

[Ken Innes]

I'm using Red Hat 7.3 on both the Samba 2.2.7 and 3.0 installations

-Ken

> -----Original Message-----
> From: Łukasz Tomaszewski [mailto:uki at telkab.pl]
> Sent: Tuesday, March 04, 2003 11:57 AM
> To: Ken Innes; Kristyan Osborne; Samba Users
> Subject: Re: [Samba] smaba 3.0 - domain groups
>
>
> i use 'truss' to trace the system calls (nmbd proccess) after 'wbinfo -g'
> request. it returns
>
> ioctl(14,SIOCGIFFLAGS,0xbfbfcdc0)   = 0 (0x0)
> ioctl(14,SIOCGIFNETMASK,0xbfbfcdc0)   = 0 (0x0)
> ioctl(14,SIOCGIFADDR,0xbfbfcde0)   ERR#49 'Can't assign requested address'
> ioctl(14,SIOCGIFADDR,0xbfbfce28)   ERR#49 'Can't assign requested address'
> ioctl(14,SIOCGIFADDR,0xbfbfce70)   ERR#49 'Can't assign requested address'
> close(14)      = 0 (0x0)
> gettimeofday(0xbfbff838,0x0)    = 0 (0x0)
> sigprocmask(0x2,0xbfbff760,0x0)    = 0 (0x0)
>
> i'm going to check samba logs after 'debug level' change (higher
> than 2) in
> smb.conf .
>
> anyway. i was thinking that maybe its OS problem. i use FreeBSD 4.7.
>
> regards
> Uki
>
> ----- Original Message -----
> From: "Ken Innes" <kinnes at ekos.com>
> To: "Kristyan Osborne" <kris at longhill.brighton-hove.sch.uk>; "Lukasz
> Tomaszewski" <uki at telkab.pl>; "Samba Users" <samba at lists.samba.org>
> Sent: Monday, March 03, 2003 6:07 PM
> Subject: RE: [Samba] smaba 3.0 - domain groups
>
>
> > I have this problem too with Samba 3.0. I've tried security = domain and
> > security = server
> > (using an NT PDC) and still get the 'Error looking up domain groups.'
> error.
> > My 2.2.7a Samba server does provide the groups. Anyone have any ideas
> about
> > this? Its
> > clearly not an entirely isolated problem!
> >
> > -Ken
> >
> > _________________________________________
> >
> > Ken Innes
> > Chief Information Officer
> > EKOS Research Associates Inc.
> > 99 Metcalfe St., Suite 1100
> > Ottawa, Ontario
> > K1P 6L7
> >
> > www.ekos.com
> >
> > > -----Original Message-----
> > > From: samba-bounces+kinnes=ekos.com at lists.samba.org
> > > [mailto:samba-bounces+kinnes=ekos.com at lists.samba.org]On Behalf
> > > Of Kristyan Osborne
> > > Sent: Monday, March 03, 2003 10:42 AM
> > > To: Lukasz Tomaszewski; Samba Users
> > > Subject: RE: [Samba] smaba 3.0 - domain groups
> > >
> > >
> > > Hi,
> > >
> > > I've had exactly the same problem since august 2002, after
> > > several emails it was not resolved so i gave up and i thought i
> > > would leave it until someone else (like u) had the same problem.
> > > Maybe then it might be answered
> > >
> > > -------------
> > > Kristyan Osborne IT Technician
> > > Longhill High School
> > > 01273 391672
> > >
> > > -----Original Message-----
> > > From: Lukasz Tomaszewski [mailto:uki at telkab.pl]
> > > Sent: 02 March 2003 19:17
> > > To: Samba Users
> > > Subject: [Samba] smaba 3.0 - domain groups
> > >
> > >
> > > few day ago, i've asked about mapping unix-windows groups under samba
> > > 2.2.7a.
> > >
> > > now, i know that it is impossible. so i've changed samba on my PDC to
> 3.0
> > > version (smbgroupedit).
> > >
> > > but still i've got problems with groups.
> > >
> > > before - from another machine when i've used 'wbinfo -g'i've got
> response
> > > from my PDC:
> > > Domain Admins
> > > Domain Users
> > >
> > > after change to samaba 3.0 with the same config file 'wbinfo -g'
> returns:
> > > Error looking up domain groups.
> > >
> > > any suggestions?
> > >
> > > regards
> > > Uki
> > >
> > > --
> > > To unsubscribe from this list go to the following URL and read the
> > > instructions:  http://lists.samba.org/mailman/listinfo/samba
> > > --
> > > To unsubscribe from this list go to the following URL and read the
> > > instructions:  http://lists.samba.org/mailman/listinfo/samba
> > >
> >
> >
>
>