[Samba] samba newbie having trouble configuring samba on RH7.3...
marvc
marvc at bellsouth.net
Sun Jun 8 00:35:08 GMT 2003
I'll try the samba rpm's. I have just one question before I begin, and I
apologize in advance if this sounds a little dumb. Once I download each
of the rpm's do I have to configure each of them or just one of them? I
could never get this question answered that's why I switched to using
tar files. If anyone here can answer this or point me to something
that'll help me understand this I'll be greatly appreciated.
tia
-----Original Message-----
From: samba-bounces+marvc=bellsouth.net at lists.samba.org
[mailto:samba-bounces+marvc=bellsouth.net at lists.samba.org] On Behalf Of
Tori Williamson
Sent: Saturday, June 07, 2003 8:12 PM
To: Sameer Zeidat; samba at lists.samba.org
Subject: Re: [Samba] samba newbie having trouble configuring samba on
RH7.3...
Marv,
My vote is with Sameer... read his prior letter and download the 4 rpms
and install them. It will TRULY make your life easier. Being that you're
using Samba at home, you're not going to gain anything over source vs.
RPM. If this was a production deployment, I'd probably say different.
But you'll have much easier control over the RPMS.
I had forgotten that you compiled from source. All yu need to do is dump
the /usr/local/samba dir (after stopping samba of course). Then install
the RPMS and start samba: "/etc/init.d/smb start"
tori
----- Original Message -----
From: "Sameer Zeidat" <sameerz at yahoo.com>
To: <samba at lists.samba.org>
Sent: Saturday, June 07, 2003 4:08 PM
Subject: RE: [Samba] samba newbie having trouble configuring samba on
RH7.3...
> Hi ..
>
> Ok .. swat isn't there because you compiled samba and installed it
> using the default location '/usr/local/samba-2.2.8a' .. so even if you
> create 'swat' manually my guess is that you'll run into other problems
> because of this location.
>
> For example, the binaries will be under '/usr/local/samba-2.2.8a/bin'
> which is not in the default path.
>
> Anyway, I'm trying to tell you that your best bet is to use RPMs
> instead of that.
>
> Good luck
>
>
> >Thanks
> >swat wasn't located in xinetd so I ended up creating it and adding
> >disable=no line. I don't know if this was necessary but I wasn't able
> >to find it.
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Calendar - Free online calendar with sync to Outlook(TM).
> http://calendar.yahoo.com
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
>
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
More information about the samba
mailing list