[Samba] Samba LDAP Primary Domain Controller
Yeri Swamy
yswamy at iternalinc.com
Wed Jun 4 17:43:49 GMT 2003
I am trying to setup my Linux box to replace WIN-NT PDC and also i want
to configure this Linux box to use LDAP authentication
I am using Mandrake 9.1 installed all the following RPMS required for
LDAP & SAMBA
libldap2-2.0.27-4mdk
libldap2-devel-2.0.27-5.3mdk.i586.rpm
libldap2-devel-static-2.0.27-5.3mdk.i586.rpm
libltdl3-1.4.3-1mdk.i586.rpm
libunixODBC2-2.2.4-1mdk.i586.rpm
nss_ldap-204-1.1mdk.i586.rpm
openldap-2.0.27-5.3mdk.i586.rpm
openldap-2.0.27-5.3mdk.src.rpm
openldap-back_dnssrv-2.0.27-5.3mdk.i586.rpm
openldap-back_ldap-2.0.27-5.3mdk.i586.rpm
openldap-back_passwd-2.0.27-5.3mdk.i586.rpm
openldap-back_sql-2.0.27-5.3mdk.i586.rpm
openldap-clients-2.0.27-5.3mdk.i586.rpm
openldap-guide-2.0.27-5.3mdk.i586.rpm
openldap-migration-2.0.27-5.3mdk.i586.rpm
openldap-servers-2.0.27-5.3mdk.i586.rpm
pam_ldap-161-1.1mdk.i586.rpm
nss_wins-2.2.8a-2mdk.i586.rpm
samba-client-2.2.8a-2mdk.i586.rpm
samba-common-ldap-2.2.8a-2mdk.i586.rpm
samba-doc-2.2.8a-2mdk.i586.rpm
samba-server-ldap-2.2.8a-2mdk.i586.rpm
samba-swat-ldap-2.2.8a-2mdk.i586.rpm
samba-vscan-fprot-2.2.8a-2mdk.i586.rpm
samba-vscan-openantivirus-2.2.8a-2mdk.i586.rpm
samba-vscan-sophos-2.2.8a-2mdk.i586.rpm
samba-vscan-trend-2.2.8a-2mdk.i586.rpm
samba-winbind-ldap-2.2.8a-2mdk.i586.rpm
I have attached slapd.conf, smb.conf, smbldap_cont.pm files
#[root]#chown -R ldap /var/lib/ldap
When i start
#[root]#ldap server /etc/init.d/ldap start (i see the output as follows)
Starting slapd (ldap + ldaps): [ OK ]
Starting slurpd: [ OK ]
i have attached ComputersOU.ldif
#[root]#ldapadd -x -D "cn=root,dc=mylan,dc=net" -W -f ComputersOU.ldif
Enter LDAP Password:( i entered the password secret here)
then after this it gives output like this
adding new entry "ou=Computers,dc=mylan,dc=net"
ldap_add: No such object
additional info: parent does not exist
ldif_record() = 32
Could anyone please tell me where i have gone wrong??
with Best Regards
YS
-------------- next part --------------
# $OpenLDAP: pkg/ldap/servers/slapd/slapd.conf,v 1.8.8.6 2001/04/20 23:32:43 kurt Exp $
#
# See slapd.conf(5) for details on configuration options.
# This file should NOT be world readable.
#
# Modified by Christian Zoffoli <czoffoli at linux-mandrake.com>
# Version 0.2
#
include /usr/share/openldap/schema/core.schema
include /usr/share/openldap/schema/cosine.schema
include /usr/share/openldap/schema/corba.schema
include /usr/share/openldap/schema/inetorgperson.schema
include /usr/share/openldap/schema/java.schema
include /usr/share/openldap/schema/krb5-kdc.schema
include /usr/share/openldap/schema/kerberosobject.schema
include /usr/share/openldap/schema/misc.schema
include /usr/share/openldap/schema/nis.schema
include /usr/share/openldap/schema/openldap.schema
#include /usr/share/openldap/schema/rfc822-MailMember.schema
#include /usr/share/openldap/schema/pilot.schema
#include /usr/share/openldap/schema/autofs.schema
include /usr/share/openldap/schema/samba.schema
#include /usr/share/openldap/schema/qmail.schema
#include /usr/share/openldap/schema/mull.schema
#include /usr/share/openldap/schema/netscape-profile.schema
#include /usr/share/openldap/schema/trust.schema
#include /usr/share/openldap/schema/dns.schema
#include /usr/share/openldap/schema/cron.schema
include /etc/openldap/schema/local.schema
# Define global ACLs to disable default read access.
include /etc/openldap/slapd.access.conf
# Do not enable referrals until AFTER you have a working directory
# service AND an understanding of referrals.
#referral ldap://root.openldap.org
pidfile /var/run/ldap/slapd.pid
argsfile /var/run/ldap/slapd.args
modulepath /usr/lib/openldap
#moduleload back_dnssrv.la
#moduleload back_ldap.la
#moduleload back_passwd.la
#moduleload back_sql.la
# SASL config
#sasl-host ldap.example.com
# To allow TLS-enabled connections, create /usr/share/ssl/certs/slapd.pem
# and uncomment the following lines.
#TLSRandFile /dev/random
#TLSCipherSuite HIGH:MEDIUM:+SSLv2
TLSCertificateFile /etc/ssl/openldap/ldap.pem
TLSCertificateKeyFile /etc/ssl/openldap/ldap.pem
#TLSCACertificatePath /etc/ssl/openldap/
TLSCACertificateFile /etc/ssl/openldap/ldap.pem
#TLSVerifyClient 0
#######################################################################
# ldbm database definitions
#######################################################################
database ldbm
suffix dc=mylan,dc=net
rootdn cn=root,dc=mylan,dc=net
# Cleartext passwords, especially for the rootdn, should
# be avoided. See slappasswd(8) and slapd.conf(5) for details.
# Use of strong authentication encouraged.
# rootpw secret
# rootpw {crypt}ijFYNcSNctBYg
rootpw {SSHA}sTwe4ljfNbEuZe6GmBi6/lPZWQACCfBi
# The database directory MUST exist prior to running slapd AND
# should only be accessable by the slapd/tools. Mode 700 recommended.
directory /var/lib/ldap
# Indices to maintain
#index objectClass eq
index objectClass,uid,uidNumber,gidNumber eq
index cn,mail,surname,givenname eq,subinitial
# Index the rid for samba:
index rid eq
# logging
loglevel 256
# Basic ACL
access to attr=userPassword
by self write
by anonymous auth
by dn="uid=root,ou=People,dc=mylan,dc=net" write
by * none
# Basic samba acl:
access to attrs=lmPassword,ntPassword
by dn="cn=root,dc=mylan,dc=net" write
by dn="uid=root,ou=People,dc=mylan,dc=net" write
by dn="cn=samba,dc=mylan,dc=net" write
by * none
# ACL allowing samba to add accounts
access to attr=uid,rid,cn,logonTime,logoffTime,kickoffTime,pwdCanchange,pwdMustchange,acctFlags,displayName,smbHome,scriptPath,profilePath,description,userWorkstations,primaryGroupID,domain
by dn="uid=root,ou=People,dc=mylan,dc=net" write
by dn="cn=samba,dc=mylan,dc=net" write
by * read
access to dn="ou=People,dc=mylan,dc=net"
by dn="uid=root,ou=People,dc=mylan,dc=net" write
by dn="cn=samba,dc=mylan,dc=net" write
by * read
access to dn="ou=Group,dc=mylan,dc=net"
by dn="uid=root,ou=People,dc=mylan,dc=net" write
by dn="cn=samba,dc=mylan,dc=net" write
by * read
access to dn="ou=Hosts,dc=mylan,dc=net"
by dn="cn=samba,dc=mylan,dc=net" write
by * read
access to *
by dn="uid=root,ou=People,dc=mylan,dc=net" write
by * read
replogfile /var/lib/ldap/replog
replica host=ldap1.mylan.net:389
binddn=ldap.mylan.net,ou=Hosts,dc=mylan,dc=net
bindmethod=simple credentials='4l70szch'
tls=yes
replica host=ldap2.mylan.net:389
binddn=ldap.mylan.net,ou=Hosts,dc=mylan,dc=net
bindmethod=simple credentials='4l70szch'
tls=yes
#readonly on
-------------- next part --------------
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]
# 1. Server Naming Options:
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = mylan
# netbios name is the name you will see in "Network Neighbourhood",
# but defaults to your hostname
; netbios name = <name_of_this_server>
# server string is the equivalent of the NT Description field
server string = Samba Server %v
# Message command is run by samba when a "popup" message is sent to it.
# The example below is for use with LinPopUp:
; message command = /usr/bin/linpopup "%f" "%m" %s; rm %s
# 2. Printing Options:
# CHANGES TO ENABLE PRINTING ON ALL CUPS PRINTERS IN THE NETWORK
# (as cups is now used in linux-mandrake 7.2 by default)
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = lpstat
load printers = yes
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx, cups
printing = cups
# Samba 2.2 supports the Windows NT-style point-and-print feature. To
# use this, you need to be able to upload print drivers to the samba
# server. The printer admins (or root) may install drivers onto samba.
# Note that this feature uses the print$ share, so you will need to
# enable it below.
# This parameter works like domain admin group:
# printer admin = @<group> <user>
printer admin = @adm
# This should work well for winbind:
; printer admin = @"Domain Admins"
# 3. Logging Options:
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Set the log (verbosity) level (0 <= log level <= 10)
; log level = 3
;log level = 10
# 4. Security and Domain Membership Options:
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page. Do not enable this if (tcp/ip) name resolution does
# not work for all the hosts in your network.
; hosts allow = 192.168.1. 192.168.2. 127.
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# Allow users to map to guest:
map to guest = bad user
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = user
# Use password server option only with security = server or security = domain
# When using security = domain, you should use password server = *
; password server = <NT-Server-Name>
; password server = *
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
# Encrypted passwords are required for any use of samba in a Windows NT domain
# The smbpasswd file is only required by a server doing authentication, thus
# members of a domain do not need one.
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd
# The following are needed to allow password changing from Windows to
# also update the Linux system password.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
unix password sync = Yes
# You either need to setup a passwd program and passwd chat, or
# enable pam password change
pam password change = yes
; passwd program = /usr/bin/passwd %u
passwd chat = *New*UNIX*password* %n\n *Re*ype*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*
# Unix users can map to different SMB User names
; username map = /etc/samba/smbusers
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m
# Options for using winbind. Winbind allows you to do all account and
# authentication from a Windows or samba domain controller, creating
# accounts on the fly, and maintaining a mapping of Windows RIDs to unix uid's
# and gid's. winbind uid and winbind gid are the only required parameters.
#
# winbind uid is the range of uid's winbind can use when mapping RIDs to uid's
; winbind uid = 10000-20000
#
# winbind gid is the range of uid's winbind can use when mapping RIDs to gid's
; winbind gid = 10000-20000
#
# winbind separator is the character a user must use between their domain
# name and username, defaults to "\"
; winbind separator = +
#
# winbind use default domain allows you to have winbind return usernames
# in the form user instead of DOMAIN+user for the domain listed in the
# workgroup parameter.
; winbind use default domain = yes
#
# template homedir determines the home directory for winbind users, with
# %D expanding to their domain name and %U expanding to their username:
; template homedir = /home/%D/%U
# When using winbind, you may want to have samba create home directories
# on the fly for authenticated users. Ensure that /etc/pam.d/samba is
# using 'service=system-auth-winbind' in pam_stack modules, and then
# enable obedience of pam restrictions below:
obey pam restrictions = yes
#
# template shell determines the shell users authenticated by winbind get
; template shell = /bin/bash
# 5. Browser Control and Networking Options:
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
os level = 65
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# 6. Domain Control Options:
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations or Primary Domain Controller for WinNT and Win2k
domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roaming profiles for WinNT and Win2k
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
logon path = \\%L\Profiles\%U
# Where to store roaming profiles for Win9x. Be careful with this as it also
# impacts where Win2k finds it's /HOME share
; logon home = \\%L\%U\.profile
# The add user script is used by a domain member to add local user accounts
# that have been authenticated by the domain controller, or by the domain
# controller to add local machine accounts when adding machines to the domain.
# The script must work from the command line when replacing the macros,
# or the operation will fail. Check that groups exist if forcing a group.
# Script for domain controller for adding machines:
; add user script = /usr/sbin/useradd -d /dev/null -g machines -c 'Machine Account' -s /bin/false -M %u
# Script for domain controller with LDAP backend for adding machines (please
# configure in /etc/samba/smbldap_conf.pm first):
add user script = /usr/share/samba/scripts/smbldap-useradd.pl -w -d /dev/null -g machines -c 'Machine Account' -s /bin/false %u
# Script for domain member for adding local accounts for authenticated users:
; add user script = /usr/sbin/useradd -s /bin/false %u
# Domain groups:
# domain admin group is a list of unix users or groups who are made members
# of the Domain Admin group
domain admin group = root @adm
#
# domain guest groups is a list of unix users or groups who are made members
# of the Domain Guests group
; domain guest group = nobody @guest
# LDAP configuration for Domain Controlling:
# The account (dn) that samba uses to access the LDAP server
# This account needs to have write access to the LDAP tree
# You will need to give samba the password for this dn, by
# running 'smbpasswd -w mypassword'
ldap admin dn = cn=samba,dc=mylan,dc=net
; ldap ssl = start_tls
ldap ssl = off
# start_tls should run on 389, but samba defaults incorrectly to 636
ldap port = 389
ldap suffix = dc=mylan,dc=net
ldap server = localhost
# 7. Name Resolution Options:
# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
name resolve order = wins lmhosts bcast
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = no
# 8. File Naming Options:
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
# Enabling internationalization:
# you can match a Windows code page with a UNIX character set.
# Windows: 437 (US), 737 (GREEK), 850 (Latin1 - Western European),
# 852 (Eastern Eu.), 861 (Icelandic), 932 (Cyrillic - Russian),
# 936 (Japanese - Shift-JIS), 936 (Simpl. Chinese), 949 (Korean Hangul),
# 950 (Trad. Chin.).
# UNIX: ISO8859-1 (Western European), ISO8859-2 (Eastern Eu.),
# ISO8859-5 (Russian Cyrillic), KOI8-R (Alt-Russ. Cyril.)
# This is an example for french users:
; client code page = 850
; character set = ISO8859-1
#============================ Share Definitions ==============================
[homes]
comment = Home Directories
browseable = no
writable = yes
# You can enable VFS recycle bin on a per share basis:
# Uncomment the next 2 lines (make sure you create a
# .recycle folder in the base of the share and ensure
# all users will have write access to it. See
# examples/VFS/recycle/REAME in samba-doc for details
; vfs object = /usr/lib/samba/vfs/recycle.so
; vfs options= /etc/samba/recycle.conf
# You may want to prevent abuse of your server disk space, and spread of virii
; veto files = /*.eml/*.nws/*.dll/*.mp3/*.MP3/*.mpg/*.MPG/*.vbs/*.VBS/
# Un-comment the following and create the netlogon directory for Domain Logons
[netlogon]
comment = Network Logon Service
path = /var/lib/samba/netlogon
guest ok = yes
writable = no
#Uncomment the following 2 lines if you would like your login scripts to
#be created dynamically by ntlogon (check that you have it in the correct
#location (the default of the ntlogon rpm available in contribs)
;root preexec = /usr/bin/ntlogon -u %U -g %G -o %a -d /var/lib/samba/netlogon/
;root postexec = rm -f /var/lib/samba/netlogon/%U.bat
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
[Profiles]
path = /var/lib/samba/profiles
browseable = no
guest ok = yes
writable = yes
# This script can be enabled to create profile directories on the fly
# You may want to turn off guest acces if you enable this, as it
# hasn't been thoroughly tested.
root preexec = PROFILE=/var/lib/samba/profiles/%u; if [ ! -e $PROFILE ]; \
then mkdir -pm700 $PROFILE; chown %u.%g $PROFILE;fi
# NOTE: If you have a CUPS print system there is no need to
# specifically define each individual printer.
# You must configure the samba printers with the appropriate Windows
# drivers on your Windows clients. On the Samba server no filtering is
# done. If you wish that the server provides the driver and the clients
# send PostScript ("Generic PostScript Printer" under Windows), you have
# to swap the 'print command' line below with the commented one.
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
# to allow user 'guest account' to print.
guest ok = yes
writable = no
printable = yes
create mode = 0700
# =====================================
# print command: see above for details.
# =====================================
print command = lpr-cups -P %p -o raw %s -r # using client side printer drivers.
; print command = lpr-cups -P %p %s -r # using cups own drivers (use generic PostScript on clients).
# The following two commands are the samba defaults for printing=cups
# change them only if you need different options:
; lpq command = lpq -P %p
; lprm command = cancel %p-%j
# This share is used for Windows NT-style point-and-print support.
# To be able to install drivers, you need to be either root, or listed
# in the printer admin parameter above. Note that you also need write access
# to the directory and share definition to be able to upload the drivers.
# For more information on this, please see the Printing Support Section of
# /usr/share/doc/samba-<version>/docs/Samba-HOWTO-Collection.pdf
[print$]
path = /var/lib/samba/printers
browseable = yes
read only = yes
write list = @adm root
guest ok = yes
# A useful application of samba is to make a PDF-generation service
# To streamline this, install windows postscript drivers (preferably colour)
# on the samba server, so that clients can automatically install them.
[pdf-generator]
path = /var/tmp
guest ok = No
printable = Yes
comment = PDF Generator (only valid users)
#print command = /usr/share/samba/scripts/print-pdf file path win_path recipient IP doc_name &
print command = /usr/share/samba/scripts/print-pdf %s ~%u //%L/%u %m %I &
[pdf-screen]
copy = pdf-generator
comment = PDF Generator - Screen quality (only valid users)
print command=/usr/share/samba/scripts/print-pdf %s ~%u //%L/%u %m %I "" %S &
[pdf-printer]
copy = pdf-generator
comment = PDF Generator - Print quality (only valid users)
print command=/usr/share/samba/scripts/print-pdf %s ~%u //%L/%u %m %I "" %S &
[pdf-prepress]
copy = pdf-generator
comment = PDF Generator - PrePress quality (only valid users)
print command=/usr/share/samba/scripts/print-pdf %s ~%u //%L/%u %m %I "" %S &
# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba/public
; public = yes
; writable = no
; write list = @staff
# Audited directory through experimental VFS audit.so module:
# Uncomment next line.
; vfs object = /usr/lib/samba/vfs/audit.so
# Other examples.
#
# A private printer, usable only by Fred. Spool data will be placed in Fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /homes/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes
# A private directory, usable only by Fred. Note that Fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no
# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/pc/%m
; public = no
; writable = yes
# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no
# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765
-------------- next part --------------
#!/usr/bin/perl
use strict;
package smbldap_conf;
# smbldap-tools.conf : Q & D configuration file for smbldap-tools
# This code was developped by IDEALX (http://IDEALX.org/) and
# contributors (their names can be found in the CONTRIBUTORS file).
#
# Copyright (C) 2001-2002 IDEALX
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version 2
# of the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
# USA.
# Purpose :
# . be the configuration file for all smbldap-tools scripts
use vars qw($VERSION @ISA @EXPORT @EXPORT_OK %EXPORT_TAGS
$UID_START $GID_START $smbpasswd $slaveLDAP $masterLDAP
$with_smbpasswd $mk_ntpasswd
$ldap_path $ldap_opts $ldapsearch $ldapsearchnobind
$ldapmodify $ldappasswd $ldapadd $ldapdelete $ldapmodrdn
$suffix $usersdn $computersdn
$groupsdn $scope $binddn $bindpasswd
$slaveDN $slavePw $masterDN $masterPw
$_userLoginShell $_userHomePrefix $_userGecos
$_defaultUserGid $_defaultComputerGid
$_skeletonDir $_userSmbHome
$_userProfile $_userHomeDrive
$_userScript $usersou $computersou $groupsou
);
use Exporter;
$VERSION = 1.00;
@ISA = qw(Exporter);
@EXPORT = qw(
$UID_START $GID_START $smbpasswd $slaveLDAP $masterLDAP
$with_smbpasswd $mk_ntpasswd
$ldap_path $ldap_opts $ldapsearch $ldapsearchnobind $ldapmodify $ldappasswd
$ldapadd $ldapdelete $ldapmodrdn $suffix $usersdn
$computersdn $groupsdn $scope $binddn $bindpasswd
$slaveDN $slavePw $masterDN $masterPw
$_userLoginShell $_userHomePrefix $_userGecos
$_defaultUserGid $_defaultComputerGid $_skeletonDir
$_userSmbHome $_userProfile $_userHomeDrive $_userScript
$usersou $computersou $groupsou
);
##############################################################################
#
# General Configuration
#
##############################################################################
#
# UID and GID starting at...
#
$UID_START = 1000;
$GID_START = 1000;
##############################################################################
#
# LDAP Configuration
#
##############################################################################
# Notes: to use to dual ldap servers backend for Samba, you must patch
# Samba with the dual-head patch from IDEALX. If not using this patch
# just use the same server for slaveLDAP and masterLDAP.
#
# Slave LDAP : needed for read operations
#
# Ex: $slaveLDAP = "127.0.0.1";
$slaveLDAP = "127.0.0.1";
#
# Master LDAP : needed for write operations
#
# Ex: $masterLDAP = "127.0.0.1";
$masterLDAP = "127.0.0.1";
#
# LDAP Suffix
#
# Ex: $suffix = "dc=IDEALX,dc=ORG";
$suffix = "dc=mylan,dc=net";
#
# Where are stored Users
#
# Ex: $usersdn = "ou=Users,$suffix"; for ou=Users,dc=IDEALX,dc=ORG
$usersou = q(People);
$usersdn = "ou=$usersou,$suffix";
#
# Where are stored Computers
#
# Ex: $computersdn = "ou=Computers,$suffix"; for ou=Computers,dc=IDEALX,dc=ORG
$computersou = q(Hosts);
$computersdn = "ou=$computersou,$suffix";
#
# Where are stored Groups
#
# Ex $groupsdn = "ou=Groups,$suffix"; for ou=Groups,dc=IDEALX,dc=ORG
$groupsou = q(Group);
$groupsdn = "ou=$groupsou,$suffix";
#
# Default scope Used
#
$scope = "sub";
#
# Credential Configuration
#
# Bind DN used
# Ex: $binddn = "cn=Manager,$suffix"; for cn=Manager,dc=IDEALX,dc=org
$binddn = "cn=samba,dc=mylan,dc=net";
#
# Bind DN passwd used
# Ex: $bindpasswd = 'secret'; for 'secret'
$bindpasswd = "8gi42uie";
#
# Notes: if using dual ldap patch, you can specify to different configuration
# By default, we will use the same DN (so it will work for standard Samba
# release)
#
$slaveDN = $binddn;
$slavePw = $bindpasswd;
$masterDN = $binddn;
$masterPw = $bindpasswd;
##############################################################################
#
# Unix Accounts Configuration
#
##############################################################################
# Login defs
#
# Default Login Shell
#
# Ex: $_userLoginShell = q(/bin/bash);
$_userLoginShell = q(/bin/bash);
#
# Home directory prefix (without username)
#
#Ex: $_userHomePrefix = q(/home/);
$_userHomePrefix = q(/home/);
#
# Gecos
#
$_userGecos = q(System User);
#
# Default User (POSIX and Samba) GID
#
$_defaultUserGid = 1000;
#
# Default Computer (Samba) GID
#
$_defaultComputerGid = 421;
#
# Skel dir
#
$_skeletonDir = q(/etc/skel);
##############################################################################
#
# SAMBA Configuration
#
##############################################################################
#
# The UNC path to home drives location without the username last extension
# (will be dynamically prepended)
# Ex: q(\\\\My-PDC-netbios-name\\homes) for \\My-PDC-netbios-name\homes
$_userSmbHome = q(\\\\ldap);
#
# The UNC path to profiles locations without the username last extension
# (will be dynamically prepended)
# Ex: q(\\\\My-PDC-netbios-name\\profiles) for \\My-PDC-netbios-name\profiles
$_userProfile = q(\\\\ldap\\Profiles\\);
#
# The default Home Drive Letter mapping
# (will be automatically mapped at logon time if home directory exist)
# Ex: q(U:) for U:
$_userHomeDrive = q(Z:);
#
# The default user netlogon script name
# if not used, will be automatically username.cmd
#
#$_userScript = q(startup.cmd); # make sure script file is edited under dos
##############################################################################
#
# SMBLDAP-TOOLS Configuration (default are ok for a RedHat)
#
##############################################################################
# Allows not to use smbpasswd (if $with_smbpasswd == 0 in smbldap_conf.pm) but
# prefer mkntpwd... most of the time, it's a wise choice :-)
$with_smbpasswd = 0;
$smbpasswd = "/usr/bin/smbpasswd";
$mk_ntpasswd = "/usr/sbin/mkntpwd";
$ldap_path = "/usr/bin";
$ldap_opts = "-x";
$ldapsearch = "$ldap_path/ldapsearch $ldap_opts -h $slaveLDAP -D '$slaveDN' -w '$slavePw'";
$ldapsearchnobind = "$ldap_path/ldapsearch $ldap_opts -h $slaveLDAP";
$ldapmodify = "$ldap_path/ldapmodify $ldap_opts -h $masterLDAP -D '$masterDN' -w '$masterPw'";
$ldappasswd = "$ldap_path/ldappasswd $ldap_opts -h $masterLDAP -D '$masterDN' -w '$masterPw'";
$ldapadd = "$ldap_path/ldapadd $ldap_opts -h $masterLDAP -D '$masterDN' -w '$masterPw'";
$ldapdelete = "$ldap_path/ldapdelete $ldap_opts -h $masterLDAP -D '$masterDN' -w '$masterPw'";
$ldapmodrdn = "$ldap_path/ldapmodrdn $ldap_opts -h $masterLDAP -D '$masterDN' -w '$masterPw'";
1;
# - The End
-------------- next part --------------
dn: ou=Computers,dc=mylan,dc=net
ou: Computers
objectClass: top
objectClass: organizationalUnit
objectClass: domainRelatedObject
associatedDomain: mylan.net
More information about the samba
mailing list