[Samba] Interfaces parameter question

[Mark French]

Hello, I have quandary, I, thought, that I had successfully gotten nmbd
to respond to queries and provide information across subnets using the
interfaces parameter in smb.conf :

interfaces = hme0 10.13.32.0/24 10.13.32.33.0/24

But upon a reboot due to a power failure nmbd failed to start and
logged this error:

[2003/06/30 08:29:47, 3] nmbd/nmbd.c:(550)
     open_sockets: Broadcast sockets opened.
[2003/06/30 08:29:47, 2] lib/interface.c:(81)
     added interface ip=10.13.32.7 bcast=10.13.35.255
nmask=255.255.252.0
[2003/06/30 08:29:47, 2] lib/interface.c:(81)
     added interface ip=10.13.33.0 bcast=10.13.35.255
nmask=255.255.252.0
[2003/06/30 08:29:47, 0] lib/util_sock.c:(804)
     bind failed on port 137 socket_addr = 10.13.33.0.
     Error = Cannot assign requested address
[2003/06/30 08:29:47, 0] nmbd/nmbd_subnetdb.c:(139) 
     nmbd_subnetdb:make_subnet()
     Failed to open nmb socket on interface 10.13.33.0 for port 137. 
Error was Cannot
     assign requested address
[2003/06/30 08:29:47, 0] nmbd/nmbd.c:(872)
     ERROR: Failed when creating subnet lists. Exiting.

Can someone provide an interpretation of this? Is the interfaces
parameter correct? What is the correct entry?

Background:

OS: Solaris 9 
SAMBA: 2.2.2
Netmasks: 10.13.32.1      255.255.252.0
                     10.13.33.1      255.255.252.0

Sincerely:
Mark French
GIS Specialist
NJ Geological Survey
P.O. Box 427 
29 Arctic Parkway
Trenton, NJ 08625-0427
phone: 609-984-6587
fax: 609-633-1004
email: mark.french at dep.state.nj.us
URL: http://www.njgeology.org