[Samba] "Incorrect function"?

j2 spamfilter2 at mupp.net
Sun Feb 9 12:20:31 GMT 2003


----- Original Message -----
From: "Kurt Weiss" <input.maillists at kwnet.at>
To: "j2" <spamfilter2 at mupp.net>
Sent: Sunday, February 09, 2003 11:47 AM
Subject: Re: [Samba] "Incorrect function"?


>
>
> j2 schrieb:
> > I upgrade from 2.2.3 -> 2.2.7a using the debian packages.  Now, i have a
big
> > problem.
>
> how about a few details?
> e.g.:
> 1) which access rights has the directory in linux/unix?
> 2) how about the relevant parts in your smb.conf file?
>
> >
> > Help... Please :)
> >
>
> everytime (if we can), but only if u help us helping ;-)

Here we go, conf and dir listing below

cookiemonster:/var/log/samba# ls -la /mnt/
total 20
drwxr-xr-x    9 root     root         4096 Oct 29 08:44 .
drwxr-xr-x   21 root     root         4096 Aug  8  2002 ..
drwxr-xr-x    2 root     root         4096 Aug 20 22:48 samba
drwxr-xr-x    2 root     root         4096 Oct 29 08:44 samba2
drwxrwxr-x    7 root     data           146 Feb  9 01:15 silo-1


#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
# $Id: smb.conf,v 1.2.4.6 2002/03/13 18:56:16 peloy Exp $
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not many any basic syntactic
# errors.
#

#======================= Global Settings =======================

[global]
#log level = 9
# Change this for the workgroup/NT-domain name your Samba server will part
of
   workgroup = MUPPNET

# server string is the equivalent of the NT Description field
   server string = %h server (Samba %v)

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   load printers = yes

# You may wish to override the location of the printcap file
;   printcap name = /etc/printcap

# 'printing = cups' works nicely
;   printing = bsd

;   guest account = nobody
   invalid users = root

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 1000

# If you want Samba to log though syslog only then set the following
# parameter to 'yes'. Please note that logging through syslog in
# Samba is still experimental.
;   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smb,nmb} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# security_level.txt for details.
   security = user

# You may wish to use password encryption. Please read ENCRYPTION.txt,
# Win95.txt and WinNT.txt in the Samba documentation. Do not enable this
# option unless you have read those documents
   encrypt passwords = yes

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

# --- Browser Control Options ---

# Please _read_ BROWSING.txt and set the next four parameters according
# to your network setup. The defaults are specified below (commented
# out.) It's important that you read BROWSING.txt so you don't break
# browsing in your network!

# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
   local master = yes

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
   os level = 65

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
   domain master = yes

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
   preferred master = yes

# --- End of Browser Control Options ---

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS
Server
  wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

# Name mangling options
;   preserve case = yes
;   short preserve case = yes

# This boolean parameter controlls whether Samba attempts to sync. the Unix
# password with the SMB password when the encrypted SMB password in the
# /etc/samba/smbpasswd file is changed.
;   unix password sync = false

# For Unix password sync. to work on a Debian GNU/Linux system, the
following
# parameters must be set (thanks to Augustin Luton <aluton at hybrigenics.fr>
for
# sending the correct chat script for the passwd program in Debian Potato).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\sUNIX\spassword:* %n\n
*Retype\snew\sUNIX\spassword:* %n\n .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
;   pam password change = no

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

   obey pam restrictions = yes

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   winbind uid = 10000-20000
;   winbind gid = 10000-20000
;   template shell = /bin/bash

#
#Settings
nt smb support = no
change notify timeout = 60
#======================= Share Definitions =======================

[homes]
   comment = Home Directories
   browseable = no
   public = no
   only user = no

# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
   writable = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want
to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700

# Un-comment the following and create the netlogon directory for Domain
Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no

[printers]
   comment = All Printers
   browseable = no
   path = /tmp
   printable = yes
   public = no
   writable = no
   create mode = 0700

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   writable = no
;   locking = no
;   path = /cdrom
;   public = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#    cdrom share is accesed. For this to work /etc/fstab must contain
#    an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#    is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

[silo-1]
        comment = silo-1
        browseable = yes
        path = /mnt/silo-1
        create mode = 770
        force user = nobody
        force group = data
        public = yes
        writable = yes

[peep]
     comment = peep
     browseable = yes
     path = /mnt/silo-3/gefu
     public = no
     writable = yes
     force user = gefu
     force group = gefu



More information about the samba mailing list