No subject
Mon Dec 1 11:34:25 GMT 2003
\\Pettit
Connect As:
Password:
On the server side, I didn't get far because the domain name come up NULL so
it failed on that test.
Below are two logs log98.txt and log2000.txt that show full debug info.
I might just have a stupid configuration or installation mistakes. I am sure
that my basic configuration must work since it is a very typical setup.
Any help will be highly appreciated and benefit all of us.
Thanks,
Ephi
Logs:
=========
98 log:
---------------------
============================================================================
===
Log98.txt
[2001/06/08 14:41:30, 5] rpc_parse/parse_prs.c:dbg_rpunival(658)
0094 buffer : M.C.K.I.N.L.E.Y.
[2001/06/08 14:41:30, 5] rpc_parse/parse_prs.c:prs_uint32(547)
00a4 status: 00000000
[2001/06/08 14:41:30, 4]
nsswitch/winbindd_util.c:domain_sequence_number(861)
got domain sequence number for PANASAS of 1770
[2001/06/08 14:41:30, 0]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(136)
@@@EPHI 3 OK
[2001/06/08 14:41:30, 3]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
[26720]: getpwnam panasas+edror
[2001/06/08 14:41:30, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
@@@EPHI In parse_domain_user domuser is panasas+edror, sep is +
[2001/06/08 14:41:30, 3]
nsswitch/winbindd_cache.c:get_cache_sequence_number(112)
CACHESEQ PANASAS/USR/edror is 1770
[2001/06/08 14:41:30, 3]
nsswitch/winbindd_cache.c:cached_sequence_number(68)
cached sequence number for PANASAS is 1770
[2001/06/08 14:41:30, 0]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(136)
@@@EPHI 3 OK
[2001/06/08 14:41:30, 3]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
[26720]: getpwnam panasas+edror
[2001/06/08 14:41:30, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
@@@EPHI In parse_domain_user domuser is panasas+edror, sep is +
[2001/06/08 14:41:30, 3]
nsswitch/winbindd_cache.c:get_cache_sequence_number(112)
CACHESEQ PANASAS/USR/edror is 1770
[2001/06/08 14:41:30, 3]
nsswitch/winbindd_cache.c:cached_sequence_number(68)
cached sequence number for PANASAS is 1770
[2001/06/08 14:41:30, 0]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(136)
@@@EPHI 3 OK
[2001/06/08 14:41:30, 6] nsswitch/winbindd.c:new_connection(324)
accepted socket 13
[2001/06/08 14:41:30, 3] nsswitch/winbindd_pam.c:winbindd_pam_auth(58)
[26720]: pam auth panasas+edror
[2001/06/08 14:41:30, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(72)
@@@EPHI in winbindd_pam_auth name_domain is PANASAS
[2001/06/08 14:41:30, 0] smbd/password.c:domain_client_validate(1557)
domain_client_validate: no challenge done - password failed
[2001/06/08 14:41:30, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(87)
@@@EPHI in winbindd_pam_auth result 0
[2001/06/08 14:41:31, 3]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
[26720]: getpwnam EDROR
[2001/06/08 14:41:31, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
@@@EPHI In parse_domain_user domuser is EDROR, sep is +
[2001/06/08 14:41:31, 0]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
@@@EPHI 1 user name_domain is null
[2001/06/08 14:41:31, 3]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
[26720]: getpwnam PANASAS+EDROR
[2001/06/08 14:41:31, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
@@@EPHI In parse_domain_user domuser is PANASAS+EDROR, sep is +
[2001/06/08 14:41:31, 3]
nsswitch/winbindd_cache.c:get_cache_sequence_number(112)
CACHESEQ PANASAS/USR/EDROR is 1770
[2001/06/08 14:41:31, 3]
nsswitch/winbindd_cache.c:cached_sequence_number(68)
cached sequence number for PANASAS is 1770
[2001/06/08 14:41:31, 0]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(136)
@@@EPHI 3 OK
[2001/06/08 14:41:31, 3]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
[26720]: getpwnam panasas+edror
[2001/06/08 14:41:31, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
@@@EPHI In parse_domain_user domuser is panasas+edror, sep is +
[2001/06/08 14:41:31, 3]
nsswitch/winbindd_cache.c:get_cache_sequence_number(112)
CACHESEQ PANASAS/USR/edror is 1770
[2001/06/08 14:41:31, 3]
nsswitch/winbindd_cache.c:cached_sequence_number(68)
cached sequence number for PANASAS is 1770
[2001/06/08 14:41:31, 0]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(136)
@@@EPHI 3 OK
[2001/06/08 14:41:31, 3]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
[26720]: getpwnam panasas+edror
[2001/06/08 14:41:31, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
@@@EPHI In parse_domain_user domuser is panasas+edror, sep is +
[2001/06/08 14:41:31, 3]
nsswitch/winbindd_cache.c:get_cache_sequence_number(112)
CACHESEQ PANASAS/USR/edror is 1770
[2001/06/08 14:41:31, 3]
nsswitch/winbindd_cache.c:cached_sequence_number(68)
cached sequence number for PANASAS is 1770
[2001/06/08 14:41:31, 0]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(136)
@@@EPHI 3 OK
[2001/06/08 14:41:31, 6] nsswitch/winbindd.c:new_connection(324)
accepted socket 14
[2001/06/08 14:41:31, 3] nsswitch/winbindd_pam.c:winbindd_pam_auth(58)
[26720]: pam auth panasas+edror
[2001/06/08 14:41:31, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(72)
@@@EPHI in winbindd_pam_auth name_domain is PANASAS
[2001/06/08 14:41:31, 0] smbd/password.c:domain_client_validate(1557)
domain_client_validate: no challenge done - password failed
[2001/06/08 14:41:31, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(87)
@@@EPHI in winbindd_pam_auth result 0
--------------------
2000 log
--------------------
============================================================================
===
Log2000.txt
[2001/06/08 14:53:00, 3] nsswitch/winbindd_util.c:debug_conn_state(36)
server: dc=MCKINLEY, pwdb_init=1, lsa_hnd=1
[2001/06/08 14:53:00, 3] nsswitch/winbindd_util.c:debug_conn_state(42)
PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
[2001/06/08 14:53:00, 3] nsswitch/winbindd_util.c:debug_conn_state(36)
server: dc=MCKINLEY, pwdb_init=1, lsa_hnd=1
[2001/06/08 14:53:00, 3] nsswitch/winbindd_util.c:debug_conn_state(42)
PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
[2001/06/08 14:53:09, 6] nsswitch/winbindd.c:new_connection(324)
accepted socket 3
[2001/06/08 14:53:09, 3]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
[26728]: getpwnam edror
[2001/06/08 14:53:09, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
@@@EPHI In parse_domain_user domuser is edror, sep is +
[2001/06/08 14:53:09, 0]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
@@@EPHI 1 user name_domain is null
[2001/06/08 14:53:10, 3]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
[26728]: getpwnam edror
[2001/06/08 14:53:10, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
@@@EPHI In parse_domain_user domuser is edror, sep is +
[2001/06/08 14:53:10, 0]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
@@@EPHI 1 user name_domain is null
[2001/06/08 14:53:10, 6] nsswitch/winbindd.c:new_connection(324)
accepted socket 13
[2001/06/08 14:53:10, 3] nsswitch/winbindd_pam.c:winbindd_pam_auth(58)
[26728]: pam auth edror
[2001/06/08 14:53:10, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(69)
@@@EPHI in winbindd_pam_auth name_domain is null
[2001/06/08 14:53:11, 3]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
[26728]: getpwnam edror
[2001/06/08 14:53:11, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
@@@EPHI In parse_domain_user domuser is edror, sep is +
[2001/06/08 14:53:11, 0]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
@@@EPHI 1 user name_domain is null
[2001/06/08 14:53:11, 6] nsswitch/winbindd.c:new_connection(324)
accepted socket 14
[2001/06/08 14:53:11, 3] nsswitch/winbindd_pam.c:winbindd_pam_auth(58)
[26728]: pam auth edror
[2001/06/08 14:53:11, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(69)
@@@EPHI in winbindd_pam_auth name_domain is null
[2001/06/08 14:53:12, 3]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
[26728]: getpwnam edror
[2001/06/08 14:53:12, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
@@@EPHI In parse_domain_user domuser is edror, sep is +
[2001/06/08 14:53:12, 0]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
@@@EPHI 1 user name_domain is null
[2001/06/08 14:53:12, 6] nsswitch/winbindd.c:new_connection(324)
accepted socket 15
[2001/06/08 14:53:12, 3] nsswitch/winbindd_pam.c:winbindd_pam_auth(58)
[26728]: pam auth edror
[2001/06/08 14:53:12, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(69)
@@@EPHI in winbindd_pam_auth name_domain is null
[2001/06/08 14:53:13, 3]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
[26728]: getpwnam edror
[2001/06/08 14:53:13, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
@@@EPHI In parse_domain_user domuser is edror, sep is +
[2001/06/08 14:53:13, 0]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
@@@EPHI 1 user name_domain is null
[2001/06/08 14:53:13, 6] nsswitch/winbindd.c:new_connection(324)
accepted socket 16
[2001/06/08 14:53:13, 3] nsswitch/winbindd_pam.c:winbindd_pam_auth(58)
[26728]: pam auth edror
[2001/06/08 14:53:13, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(69)
@@@EPHI in winbindd_pam_auth name_domain is null
[2001/06/08 14:53:14, 5] nsswitch/winbindd.c:client_read(405)
read failed on sock 16, pid 26728: EOF
[2001/06/08 14:53:14, 5] nsswitch/winbindd.c:client_read(405)
read failed on sock 15, pid 26728: EOF
[2001/06/08 14:53:14, 5] nsswitch/winbindd.c:client_read(405)
read failed on sock 14, pid 26728: EOF
[2001/06/08 14:53:14, 5] nsswitch/winbindd.c:client_read(405)
read failed on sock 13, pid 26728: EOF
[2001/06/08 14:53:14, 5] nsswitch/winbindd.c:client_read(405)
read failed on sock 3, pid 26728: EOF
[2001/06/08 14:53:44, 3] nsswitch/winbindd_util.c:establish_connections(351)
establishing connections
[2001/06/08 14:53:44, 3] nsswitch/winbindd_util.c:debug_conn_state(36)
server: dc=MCKINLEY, pwdb_init=1, lsa_hnd=1
[2001/06/08 14:53:44, 3] nsswitch/winbindd_util.c:debug_conn_state(42)
PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
[2001/06/08 14:53:44, 3] nsswitch/winbindd_util.c:debug_conn_state(36)
server: dc=MCKINLEY, pwdb_init=1, lsa_hnd=1
[2001/06/08 14:53:44, 3] nsswitch/winbindd_util.c:debug_conn_state(42)
PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
[2001/06/08 14:54:14, 3] nsswitch/winbindd_util.c:establish_connections(351)
establishing connections
[2001/06/08 14:54:14, 3] nsswitch/winbindd_util.c:debug_conn_state(36)
server: dc=MCKINLEY, pwdb_init=1, lsa_hnd=1
[2001/06/08 14:54:14, 3] nsswitch/winbindd_util.c:debug_conn_state(42)
PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
[2001/06/08 14:54:14, 3] nsswitch/winbindd_util.c:debug_conn_state(36)
server: dc=MCKINLEY, pwdb_init=1, lsa_hnd=1
[2001/06/08 14:54:14, 3] nsswitch/winbindd_util.c:debug_conn_state(42)
PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
[2001/06/08 14:54:26, 6] nsswitch/winbindd.c:new_connection(324)
accepted socket 3
[2001/06/08 14:54:26, 3]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
[26732]: getpwnam edror
[2001/06/08 14:54:26, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
@@@EPHI In parse_domain_user domuser is edror, sep is +
[2001/06/08 14:54:26, 0]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
@@@EPHI 1 user name_domain is null
[2001/06/08 14:54:26, 3]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
[26732]: getpwnam edror
[2001/06/08 14:54:26, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
@@@EPHI In parse_domain_user domuser is edror, sep is +
[2001/06/08 14:54:26, 0]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
@@@EPHI 1 user name_domain is null
[2001/06/08 14:54:26, 6] nsswitch/winbindd.c:new_connection(324)
accepted socket 13
[2001/06/08 14:54:26, 3] nsswitch/winbindd_pam.c:winbindd_pam_auth(58)
[26732]: pam auth edror
[2001/06/08 14:54:26, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(69)
@@@EPHI in winbindd_pam_auth name_domain is null
[2001/06/08 14:54:27, 3]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
[26732]: getpwnam edror
[2001/06/08 14:54:27, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
@@@EPHI In parse_domain_user domuser is edror, sep is +
[2001/06/08 14:54:27, 0]
nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
@@@EPHI 1 user name_domain is null
[2001/06/08 14:54:27, 6] nsswitch/winbindd.c:new_connection(324)
accepted socket 14
[2001/06/08 14:54:27, 3] nsswitch/winbindd_pam.c:winbindd_pam_auth(58)
[26732]: pam auth edror
[2001/06/08 14:54:27, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(69)
@@@EPHI in winbindd_pam_auth name_domain is null
[2001/06/08 14:54:28, 5] nsswitch/winbindd.c:client_read(405)
read failed on sock 14, pid 26732: EOF
[2001/06/08 14:54:28, 5] nsswitch/winbindd.c:client_read(405)
read failed on sock 13, pid 26732: EOF
[2001/06/08 14:54:28, 5] nsswitch/winbindd.c:client_read(405)
read failed on sock 3, pid 26732: EOF
[2001/06/08 14:54:29, 6] nsswitch/winbindd.c:new_connection(324)
accepted socket 3
[2001/06/08 14:54:29, 3] nsswitch/winbindd_group.c:winbindd_getgroups(857)
[26733]: getgroups nobody
[2001/06/08 14:54:29, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
@@@EPHI In parse_domain_user domuser is nobody, sep is +
[2001/06/08 14:54:29, 6] nsswitch/winbindd.c:new_connection(324)
accepted socket 13
[2001/06/08 14:54:29, 3] nsswitch/winbindd_group.c:winbindd_getgroups(857)
[26733]: getgroups nobody
[2001/06/08 14:54:29, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
@@@EPHI In parse_domain_user domuser is nobody, sep is +
[2001/06/08 14:54:59, 3] nsswitch/winbindd_util.c:establish_connections(351)
establishing connections
[2001/06/08 14:54:59, 3] nsswitch/winbindd_util.c:debug_conn_state(36)
server: dc=MCKINLEY, pwdb_init=1, lsa_hnd=1
[2001/06/08 14:54:59, 3] nsswitch/winbindd_util.c:debug_conn_state(42)
PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
[2001/06/08 14:54:59, 3] nsswitch/winbindd_util.c:debug_conn_state(36)
server: dc=MCKINLEY, pwdb_init=1, lsa_hnd=1
[2001/06/08 14:54:59, 3] nsswitch/winbindd_util.c:debug_conn_state(42)
PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
util.c:debug_conn_state(42)
PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
============================================================================
===
-------------------
Return-Path: <abartlet at pcug.org.au>
Delivered-To: samba at lists.samba.org
Received: from dnscache.cbr.au.asiaonline.net
(dnscache.cbr.au.asiaonline.net [210.215.8.100]) by lists.samba.org
(Postfix) with ESMTP id 686324261 for <samba at lists.samba.org>; Mon, 11
Jun 2001 15:36:08 -0700 (PDT)
Received: from piglett.bartlett.house (as3-234.cbr.au.asiaonline.net
[210.215.11.234]) by dnscache.cbr.au.asiaonline.net (8.10.2/8.10.2)
with ESMTP id f5BMZJq14097; Tue, 12 Jun 2001 08:35:20 +1000 (EST)
Received: from yowiee.bartlett.house (IDENT:root at yowiee.bartlett.house
[192.168.1.99]) by piglett.bartlett.house (8.9.3/8.8.7) with ESMTP id
IAA27951; Tue, 12 Jun 2001 08:34:56 +1000
Received: from bartlett.house (IDENT:abartlet at piglett.bartlett.house
[192.168.1.1]) by yowiee.bartlett.house (8.9.3/8.8.7) with ESMTP id
IAA05144; Tue, 12 Jun 2001 08:34:55 +1000
Message-ID: <3B25478F.718465E2 at bartlett.house>
Date: Tue, 12 Jun 2001 08:34:55 +1000
From: Andrew Bartlett <abartlet at pcug.org.au>
X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.19-6.2.1 i686)
X-Accept-Language: en
MIME-Version: 1.0
To: "Oliver Schulze L." <oliver at samera.com.py>
Cc: samba at lists.samba.org
Subject: Re: Samba 2.2.0 and 'max connections'
References: <3B252A06.3070405 at samera.com.py>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
"Oliver Schulze L." wrote:
>
> Hi.
> I'm writing about the issue of the option 'max connections' in samba 2.2.0
> I have downgraded to 2.0.7 because of this issue and now I really need to
> have samba 2.2.x running in my production server.
>
> So, my cuestion is: can I download a patch for 2.2.0 that resolve this
> issue?
> Or should I dowload the source via CVS?
> If I should download the source code via CVS, is there any
> "nightly build" of the CVS?
>
Current CVS of SAMBA_2_2 contains a fix for this. There is no 'nightly
build', as use of CVS code isn't exactly encouraged :-), and there are
soo many different options one might decide to build with.
Andrew Bartlett
--
Andrew Bartlett
abartlet at pcug.org.au
Return-Path: <tpot at samba.org>
Delivered-To: samba at lists.samba.org
Received: by lists.samba.org (Postfix, from userid 1007) id 500AC4A91;
Mon, 11 Jun 2001 16:52:20 -0700 (PDT)
Date: Mon, 11 Jun 2001 16:52:20 -0700
From: Tim Potter <tpot at valinux.com>
To: "M. Kilroy" <mekilroy at risingedge.com>
Cc: Gerald Carter <gcarter at valinux.com>, samba-ntdom at lists.samba.org,
samba at lists.samba.org
Subject: Re: log.winbindd error
Message-ID: <20010611165220.C23265 at va.samba.org>
References: <Pine.LNX.4.33.0106090827041.8869-100000 at pogo.plainjoe.org>
<032501c0f279$52c15360$1a00a8c0 at diamondback>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.5i
In-Reply-To: <032501c0f279$52c15360$1a00a8c0 at diamondback>; from
mekilroy at risingedge.com on Mon, Jun 11, 2001 at 09:20:45AM -0400
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Mon, Jun 11, 2001 at 09:20:45AM -0400, M. Kilroy wrote:
> >> I have this error in my log.winbindd file:
> >> nsswitch/winbindd_util.c:parse_id_list(712)
> >> winbind uid parameter missing
> >> Does anyone know what this means?
> >> THANKS!
> >> ~Mary
>
> >See the smb.conf man page and look for all parameters prefixed
> >with winbind. You have to define a ranage of uids and gids
> >which winbind can use when allocating new user accounts.
>
> I now have winbind uid = 10000 - 20000 in my smb.conf file. I still get the
> following:
> [root at LINUXSERV bin]# ./winbindd -d 3 -i
> added interface ip=192.168.0.240 bcast=192.168.0.255 nmask=255.255.255.0
> added interface ip=192.168.0.100 bcast=192.168.0.255 nmask=255.255.255.0
> winbind uid parameter missing
Try removing the spaces between the uid ranges. I.e
winbind uid = 10000-20000
I think the parser doesn't handle spaces very well.
Tim.
Return-Path: <tpot at samba.org>
Delivered-To: samba at lists.samba.org
Received: by lists.samba.org (Postfix, from userid 1007) id EEFEC4BE8;
Mon, 11 Jun 2001 17:12:38 -0700 (PDT)
Date: Mon, 11 Jun 2001 17:12:38 -0700
From: Tim Potter <tpot at valinux.com>
To: Samba-JP TAKAHASHI Motonobu <monyo at samba.gr.jp>
Cc: samba at lists.samba.org, sugj-tech at samba.gr.jp
Subject: Re: limit on the share name to 13 characters?
Message-ID: <20010611171238.H23265 at va.samba.org>
References: <3B248CC3.A247FCB5 at farmexim.ro>
<2fhexnufq7.wl at tomoyo.home.monyo.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.5i
In-Reply-To: <2fhexnufq7.wl at tomoyo.home.monyo.com>; from
monyo at samba.gr.jp on Tue, Jun 12, 2001 at 01:46:24AM +0900
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Tue, Jun 12, 2001 at 01:46:24AM +0900, Samba-JP TAKAHASHI Motonobu wrote:
> We have already found this problem that ...
>
> A share name with over 13 characters is not available against Windows
> 9x.
>
> Also a share name with over 12 characters is not available against
> Windows NT/2000.
>
> Here is a quick hack that we use for Samba 2.0.9 Japanese Edition.
>
> This patch truncates these share names and write a warning message.
This bug is fixed in Samba 2.2. It turns out it is actually a bug in
the Windows NT handling of ascii smb clients.
Tim.
Return-Path: <drsadi at e-kolay.net>
Delivered-To: samba at samba.org
Received: from e-kolay.net (unknown [62.29.32.172]) by lists.samba.org
(Postfix) with SMTP id C4C5F4CAC for <samba at samba.org>; Mon, 11 Jun
2001 17:19:58 -0700 (PDT)
From: "Dr. Sadi Uzun" <drsadi at e-kolay.net>
To: <samba at samba.org>
Subject: Cinsel problemlerinize son verebilirsiniz
Mime-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"
Date: Tue, 12 Jun 2001 03:16:45 +0300
Content-Transfer-Encoding: 7bit
Message-Id: <20010612001958.C4C5F4CAC at lists.samba.org>
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Cinsel Problemlere Kalici ve Kesin Cozumler
Ereksiyon sorunlari, iktidarsizlik, performans arttirma...
Erken bosalma sorunlari ve penis buyutme teknikleri
(ameliyatsiz/vakumsuz)...
Bayanlarda isteksizlik, orgazm sorunlari ve firijitlik...
Turk toplumunun yabanci oldugu cinsellik bilgileri ve seks teknikleri...
Mutluluklar dilerim.
Saygilarimla,
Dr. Sadi Uzun
drsadiu at e-kolay.net
(Her turlu bilgi, danisma, soru, sorun ve teklifleriniz icin
bu adresi kullaniniz, reply yapmayiniz)
Return-Path: <oliver at samera.com.py>
Delivered-To: samba at lists.samba.org
Received: from Polaris.Pla.net.PY (polaris.pla.net.py [216.250.196.10])
by lists.samba.org (Postfix) with ESMTP id 6651F49D1 for
<samba at lists.samba.org>; Mon, 11 Jun 2001 17:53:21 -0700 (PDT)
Received: (from uucp at localhost) by Polaris.Pla.net.PY (8.11.2/8.11.2)
with UUCP id f5BGswR15991; Mon, 11 Jun 2001 20:54:58 +0400
Received: from samera.com.py (sojourner.samera.com [192.168.1.1]) by
samera.com (8.9.3/8.9.3) with ESMTP id UAA29611; Mon, 11 Jun 2001
20:49:14 -0400
Message-ID: <3B256709.4070206 at samera.com.py>
Date: Mon, 11 Jun 2001 20:49:13 -0400
From: "Oliver Schulze L." <oliver at samera.com.py>
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.1)
Gecko/20010607
X-Accept-Language: en-us
MIME-Version: 1.0
To: Andrew Bartlett <abartlet at pcug.org.au>
Cc: samba at lists.samba.org
Subject: Re: Samba 2.2.0 and 'max connections'
References: <3B252A06.3070405 at samera.com.py>
<3B25478F.718465E2 at bartlett.house>
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi Andrew,
I think I will be wait for the 2.2.1 and
for the Win2k boxes I will use the workgroup option.
Thanks
Oliver
Andrew Bartlett wrote:
>"Oliver Schulze L." wrote:
>
>>Hi.
>>I'm writing about the issue of the option 'max connections' in samba 2.2.0
>>I have downgraded to 2.0.7 because of this issue and now I really need to
>>have samba 2.2.x running in my production server.
>>
>>So, my cuestion is: can I download a patch for 2.2.0 that resolve this
>>issue?
>>Or should I dowload the source via CVS?
>>If I should download the source code via CVS, is there any
>>"nightly build" of the CVS?
>>
>
>Current CVS of SAMBA_2_2 contains a fix for this. There is no 'nightly
>build', as use of CVS code isn't exactly encouraged :-), and there are
>soo many different options one might decide to build with.
>
>Andrew Bartlett
>
Return-Path: <lutzray at pacbell.net>
Delivered-To: samba at lists.samba.org
Received: from mta7.pltn13.pbi.net (mta7.pltn13.pbi.net [64.164.98.8])
by lists.samba.org (Postfix) with ESMTP id C9C304B5A for
<samba at lists.samba.org>; Mon, 11 Jun 2001 18:12:27 -0700 (PDT)
Received: from lutzray.pacbell.net ([64.165.17.227]) by
mta7.pltn13.pbi.net (Sun Internet Mail Server
sims.3.5.2000.03.23.18.03.p10) with ESMTP id
<0GES00F8OLY8RY at mta7.pltn13.pbi.net> for samba at lists.samba.org; Mon,
11 Jun 2001 18:10:59 -0700 (PDT)
Date: Mon, 11 Jun 2001 18:06:33 -0700
From: Raymond Lutz <lutzray at pacbell.net>
Subject: Re: Can't get Linux 7.1/ Win 98 operation
In-reply-to: <01060910144000.00586 at peter>
X-Sender: lutzray at postoffice.pacbell.net
To: peter at dueppenbecker.de, Tony Nugent <tony at growzone.com.au>, Chad
<temp at yourmomma.myip.org>
Cc: samba at lists.samba.org
Message-id: <5.1.0.14.2.20010610155234.00a5f760 at postoffice.pacbell.net>
MIME-version: 1.0
X-Mailer: QUALCOMM Windows Eudora Version 5.1
Content-type: text/plain; charset="us-ascii"; format=flowed
References: <5.1.0.14.2.20010608163502.00a63640 at postoffice.pacbell.net>
<4.3.2.7.2.20010608104528.042baee0 at postoffice.pacbell.net>
<5.1.0.14.2.20010608163502.00a63640 at postoffice.pacbell.net>
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Thanks Peter, Tony and Chad for your input so far.
I am still trying to connect RH 7.1 to Win98se via SAMBA. I thought I had
it whipped but I am only partially there. I am getting various results with
different smb.conf settings, but not yet any real success. I have corrected
a lot. After studying the documentation for every .conf parameter, I have a
Best Guess and two alternative configurations as follows. Note: I am trying
to just get this communicating and I am willing to sacrifice security for
the time being.
# Common Best-Guess Alt 1 Alt 2
# ----------- ---------- ----- -----
[global]
workgroup = COGNISYS
newbios name = PLEIADES
server string = Samba %v on (%L)
encrypt passwords = Yes
password level = 20
username level = 10
unix password sync = no
log level = 10
deadtime = 15
map archive = no
map hidden = no
map system = no
debug level = 1
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
domain logons = no
load printers = no
log file = /usr/local/samba/var/samba.log
max log size = 5000
security = user user share
os level = 65 0 0
local master = yes no no
preferred master = yes no no
domain master = yes no no
dns proxy = yes no no
wins support = yes no yes
# other settings left at default values.
[homes]
path = /home/%u
writable = yes
guest ok = no
comment = Home Directories
browseable = no
[tmp]
comment = Temporary File Space
path = /tmp
read only = no
public = yes
-------------------
On Win98se, it is configured to use Win server at IP of pleiades. Only
TCP/IP is enabled. Everyone pings. The linux box can use the internet
through a proxy just fine.
The main (stupid) thing I had wrong so far was that the "netbios name" was
not set in the configuration. Geez, you would think this would be a part of
the required sample smb.conf, and not something that would have to be added
later as an unusual configuration. I also had to go through the setup of
enabling encryption. I read somewhere that I might have to recompile to
support encryption, you might be able to confirm that, although I could not
find any switch to do it. I also setup the win98 machine under passwords to
make sure it was actually going to work with different user identities. I
am logged in as user "cognisys" with the same password used for everything
on the RH7.1, and there is a user established on the linux box with same
username and password. Win98 is set to use WINS with samba IP specified.
I eliminated the possible old rpm version and rebuilt the samba code. I
moved the smb.conf to the standard location, even thought it appeared to be
using the alternative location.
testparm program tests the configuration ok.
In all configurations, tcpdump keeps getting:
...pleiades > orion: icmp: pleiades udp port netbios-ns unreachable (DF)
also, the "nmblookup -d 2 '*'" command does not find anything.
I imagine this means that the name service stuff on Linux box is not working.
I tried using lmhosts, hosts, wins, with no real breakthrough. I turned
these off too and got nowhere.
With Best-Guess, settings shown above, I don't see the linux box in "net view".
With Alt 1 & 2, I see the linux box in "net view" but can't list shares.
Alt 2 seems to be running the best so far.
I tried "smbclient -L pleiades" on the linux box and it complains that I
have the wrong password in "Best Guess" smb.conf, but works in Alternate 1
and 2. Note: now MASTER is empty, it was PLEIADES before.
the /etc/resolv.conf file exists and it contains 192.168.0.6, the PC addr.
I am really disappointed in this package as it appears that almost no
thought has been given to profile the configuration parameters for common
usage scenarios, such as win98se connection, which shouldn't be too
uncommon. Indeed, even rarely used or deprecated settings are listed along
with all the others as if there are just as important.
--> Perhaps someone has a working smb.conf file that is used with samba
2.2.0 and win98se on RH 7.1. If you have such a thing, also let me know how
you have configured your Win98 network settings, lmhosts, etc. to give me
the full picture.
Any help you can provide would be most appreciated.
--Raymond
At 10:14 AM 6/9/01 +0200, you wrote:
>What was the Problem?
>
>MfG PMD
>
> > Your input was enough for be to see my stupid mistakes! Thanks!
> >
> > At 11:30 PM 6/8/01 +0200, you wrote:
> > >Please send me the output of the testparm program. Could be something with
> > >SSL. Did you compile Samba yourself?
> > >
> > >MfG PMD
> > >
> > > > Hello:
> > > > I have given up searching the documentation and trying various
> > > > scenarios, and I still can't seem to get a connection between my RedHat
> > > > Linux 7.1 install of samba version 2.2.0 and windows 98se network. Let
> > > > me summarize my configuration.
> > > >
> > > > I've set up my windows network to run only TCP/IP and I've installed
> > > > the lmhosts and hosts files so that it is possible to ping from both
> > > > sides using the names of the hosts. In my configuration, the group is
> > > > COGNISYS and the windows box is ORION, linux box is PLEIADES. Here are
> > > > some more specifics on the files:
> > > >
> > > > file "c:\windows\lmhosts" on ORION:
> > > > ------------------------------------
> > > > 192.168.0.4 moon
> > > > 192.168.0.6 orion
> > > > 192.168.0.9 pleiades
> > > > ------------------------------------
> > > > I'm not sure if I need entries for windows machine names.
> > > >
> > > > file "c:\windows\hosts" on ORION:
> > > > ------------------------------------
> > > > 127.0.0.1 localhost
> > > > ------------------------------------
> > > >
> > > > file "/etc/hosts" on PLEIADES:
> > > > ------------------------------------
> > > > 127.0.0.1 localhost.localdomain localhost
> > > > 192.168.0.9 pleiades
> > > > 192.168.0.6 orion
> > > > 192.168.0.4 moon
> > > > ------------------------------------
> > > >
> > > >
> > > > I can ping PLEIADES from ORION:
> > > > (There is several seconds of delay after envoking this command before
> > > > response is provided.)
> > > > ------------------------------------
> > > > C:\WINDOWS>ping pleiades
> > > >
> > > > Pinging pleiades [192.168.0.9] with 32 bytes of data:
> > > >
> > > > Reply from 192.168.0.9: bytes=32 time<10ms TTL=255
> > > > Reply from 192.168.0.9: bytes=32 time<10ms TTL=255
> > > > Reply from 192.168.0.9: bytes=32 time<10ms TTL=255
> > > > Reply from 192.168.0.9: bytes=32 time<10ms TTL=255
> > > >
> > > > Ping statistics for 192.168.0.9:
> > > > Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
> > > > Approximate round trip times in milli-seconds:
> > > > Minimum = 0ms, Maximum = 0ms, Average = 0ms
> > > > ------------------------------------
> > > >
> > > > And I can ping from PLEIADES to ORION (and other machines on the
> > > > network.) (Not shown -- responds quickly.)
> > > >
> > > > I perform a "ps -A" on PLEIADES and I DO SEE smbd and nmbd processes.
> > > >
> > > > I perform "smbclient -L PLEIADES" on PLEIADES and get:
> > > > ------------------------------------
> > > > SSL:Error error setting CA cert locations:
> > > > error:00000000:lib(0):func(0):reason(0)
> > > > trying default locations.
> > > > added interface ip=192.168.0.9 bcast=102.168.0.255 nmask=255.255.255.0
> > > > Password:(I typed it in)
> > > > Domain=[COGNISYS] OS=[Unix] Server=[Samba 2.2.0]
> > > >
> > > > Sharename Type Comment
> > > > --------- ---- -------
> > > > tmp Disk Temporary File Space
> > > > IPC$ IPC IPC Service (Samba Server)
> > > > ADMIN$ Disk IPC Service (Samba Server)
> > > > root Disk Home Directories
> > > >
> > > > Server Comment
> > > > ------ -------
> > > > PLEIADES Samba Server
> > > >
> > > > Workgroup Master
> > > > --------- -------
> > > > COGNISYS PLEIADES
> > > >
> > > > ------------------------------------
> > > > this matches the share information from smb.conf.
> > > >
> > > > I perform "nmblookup -B PLEIADES __SAMBA__" on PLEIADES and get:
> > > > ------------------------------------
> > > > querying __SAMBA__ on 127.0.0.1
> > > > 192.168.0.9 __SAMBA__<00>
> > > > ------------------------------------
> > > >
> > > > I perform "nmblookup -B ORION '*'" on PLEIADES and get:
> > > > ------------------------------------
> > > > querying * on 192.168.0.6
> > > > name_query failed to find name *
> > > > ------------------------------------
> > > > This is the first failure that I have detected in the setup.
> > > >
> > > > If I perform "nmblookup -d 2 '*'" on PLEIADES I get:
> > > > ------------------------------------
> > > > added interface ip=192.168.0.9 bcast=102.168.0.255 nmask=255.255.255.0
> > > > querying * on 192.168.0.255
> > > > name_query failed to find name *
> > > > ------------------------------------
> > > >
> > > > Performed "smbclient //pleiades/tmp" on PLEIADES and get:
> > > > ------------------------------------
> > > > SSL:Error error setting CA cert locations:
> > > > error:00000000:lib(0):func(0):reason(0)
> > > > trying default locations.
> > > > added interface ip=192.168.0.9 bcast=102.168.0.255 nmask=255.255.255.0
> > > > session request to PLEIADES failed (Not listening to calling name)
> > > > session request to *SMBSERVER failed (Not listening to calling name)
> > > > ------------------------------------
> > > >
> > > > Performed "smbclient //127.0.0.1/tmp" on PLEIADES and get:
> > > > ------------------------------------
> > > > SSL:Error error setting CA cert locations:
> > > > error:00000000:lib(0):func(0):reason(0)
> > > > trying default locations.
> > > > added interface ip=192.168.0.9 bcast=102.168.0.255 nmask=255.255.255.0
> > > > Password: (I typed it in)
> > > > Domain=[COGNISYS] OS=[Unix] Server=[Samba 2.2.0]
> > > > smb: \> (I typed ls with good directory listing response)
> > > > ------------------------------------
> > > >
> > > > On ORION (the PC) I tried "NET VIEW" with the following response:
> > > > ------------------------------------
> > > > Servers available in workgroup COGNISYS.
> > > > Server name Remark
> > > > -------------------------------------------
> > > > \\MOON Dell OptiPlex XM 575
> > > > \\ORION Etower 466is
> > > > The command was completed successfully.
> > > > ------------------------------------
> > > > This matches the machines I had on the network for testing except
> > > > PLEIADES is not listed.
> > > >
> > > > I tried "NET VIEW \\PLEIADES" with result:
> > > > ------------------------------------
> > > > Error 59: An unexpected network error has occurred. Quit all running
> > > > programs, restart your computer, and then try again. If the problem
> > > > persists, contact your network administrator.
> > > > ------------------------------------
> > > > Ouch! Not sure why this crashes so hard. PC seems to continue working
> > > > OK most of the time.
> > > >
> > > > Here is the "/etc/samba/smb.conf" file (abbreviated):
> > > > ------------------------------------
> > > > [global]
> > > > workgroup = COGNISYS
> > > > server string = Samba Server
> > > > log file = /usr/local/samba/var/log.%m
> > > > max log size = 100
> > > > security = user
> > > > dns proxy = no
> > > > [homes]
> > > > comment = Home Directories
> > > > browseable = no
> > > > writable = yes
> > > > guest ok = no
> > > > read only = no
> > > > path /home/%u
> > > > [printers]
> > > > comment = All Printers
> > > > path = /usr/spool/samba
> > > > browseable = no
> > > > writable = no
> > > > guest ok = no
> > > > printable = yes
> > > > [tmp]
> > > > comment = Temporary file space
> > > > path = /tmp
> > > > read only = no
> > > > public = yes
> > > > ------------------------------------
> > > > Can you help me ?? Thanks in advance!
> > > > --Raymond Lutz
-------------------------------------------------------------
Raymond Lutz Voice: 619-447-3246
Cognisys, Inc. Fax: 619-447-6872
1010 Old Chase Ave., Suite B http://www.cognisys.com
El Cajon (San Diego Cty), CA 92020 USA http://www.mfpa.org
Return-Path: <jeppesen at mrl.ucsb.edu>
Delivered-To: samba at samba.org
Received: from mail.mrl.ucsb.edu (mail.mrl.ucsb.edu [128.111.119.16]) by
lists.samba.org (Postfix) with ESMTP id C7E8E45C0 for
<samba at samba.org>; Mon, 11 Jun 2001 19:21:41 -0700 (PDT)
Received: from mrl.ucsb.edu (ppp119.mrl.ucsb.edu [128.111.119.119]) by
mail.mrl.ucsb.edu (8.9.3/8.9.3) with ESMTP id TAA15708 for
<samba at samba.org>; Mon, 11 Jun 2001 19:21:21 -0700
Message-ID: <3B257C76.7D928B20 at mrl.ucsb.edu>
Date: Mon, 11 Jun 2001 19:20:38 -0700
From: Claus Jeppesen <jeppesen at mrl.ucsb.edu>
X-Mailer: Mozilla 4.72 [en] (Win98; U)
X-Accept-Language: en
MIME-Version: 1.0
To: samba at samba.org
Subject: Printing from Win98 to Windows2000 Pro. printer.
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Dear Samba-people,
I have the following poblem:
a) Linux box with samba2.2.0 - running a DOMAIN.
b) Win2000 client joining the Samba domain.
c) A local printer on the Win2000 I would like to share.
d) A Win98 client who would like to print to the printer on the Win2000
machine.
Part d) does not seem to work - in fact all shares from the Win2000
machine are not available to
the Win98 client (when using an account name that comes from the Samba
server) - I simply
get on the Win98 that the account has "expired" when trying to connect
to the Win2000. Connections from the Win98 to the Samba server works
just fine. Is this a known problem ?
Is there a workaround ?
Thanx so much,
Claus.
P.S. I can print from another Win2000Pro client in the domain to the
first Win2000Pro client's
printer share.
Return-Path: <parris at isciences.com>
Delivered-To: samba at lists.samba.org
Received: from mr4.ash.ops.us.uu.net (mr4.ash.ops.us.uu.net
[198.5.241.89]) by lists.samba.org (Postfix) with ESMTP id B7D0C4CCE
for <samba at lists.samba.org>; Mon, 11 Jun 2001 19:55:13 -0700 (PDT)
Received: from CHERRYBLOSSOM by mr4.ash.ops.us.uu.net with SMTP (peer
crosschecked as: [63.96.40.58]) id QQktap20216 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 02:54:54 GMT
Reply-To: <parris at isciences.com>
From: "Thomas M. Parris" <parris at isciences.com>
To: <samba at lists.samba.org>
Subject: newbie problems.
Date: Mon, 11 Jun 2001 22:57:15 -0400
Message-ID: <000601c0f2eb$63bbc3e0$3a28603f at CHERRYBLOSSOM>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Dear Samba team:
I am hoping you can help a Samba newbie make some progress with your
software.
1. Platform/network.
Samba server: RedHat 7.1 (MYSERVER)
Samba version: 2.0.8
Client 1: Win 2K (W2K1)
Client 2: Win 2K (W2K2)
Client 3: Win 98 (W981)
2. Progress (and lack thereof) to date.
A. I can mount shares from either of the Win 2K machines (with "net use
...")
B. However, the Samba server does not appear in the network neigborhood for
any client (nmb problem?)
C. I can't connect at all from the Win 98 machine ("Error 53"). (Yes, I am
using encrypted passwords.)
3. Progress with diagnostics
(http://us2.samba.org/samba/docs/DIAGNOSIS.html)
Test 1: testparms works without problem.
Test 2: pings work in both directions.
Test 3: smbclient -L MYSERVER works.
Test 4: nmblookup -B MYSERVER __SAMBA__ works (sort of).
I can't get it to work through xinetd. Only when I start nmbd as a
deamon.
My xinetd config for nmbd is:
# default: on
service netbios-ns
{
flags = REUSE
protocol = upd
socket_type = dgram
wait = yes
user = root
server = /usr/sbin/nmbd
log_on_failure += USERID
disable = no
}
Test 5: nmblookup -B w2k1 '*'
nmblookup -B w2k2 '*'
nmblookup -B w981 '*'
I don't have the client registered with DNS, so I am using their ip
addresses.
None of these lookups work. However, nmblookup -B MYSERVER does work.
The diagnosis text suggests that this is a problem with the client
softtware installation. However, these machines can all share files with
each other without difficulty. They all appear in the network neighborhood
without problem.
Test 6: nmblookup -d 2 '*'
This only returns the ip address for MYSERVER.
Test 7: smbclient //MYSERVER/myshare
Works fine.
Test 8: net view \\MYSERVER
Does not work. Though I can see all of the other clients with this
method. I've tried adding the IP address of BIGSERVER to the "wins server"
box in the advanced tcp/ip setup on the PC. No change in behaviour.
Test 9: net use x: \\MYSERVER\myshare
Works from the two WIN2K clients, but not from the WIN98 client.
Test 10: nmblookup -M TESTGROUP
Only returns the name of the samba server.
Test 11: Fails from all three clients.
I would be most grateful for any pointers. My guess is that this is a
problem with nmb configuration and/or firewall settings. However,
"ipchains --list" produces:
Chain input (policy ACCEPT):
target prot opt source destination ports
ACCEPT tcp -y---- anywhere anywhere any ->
netbios-ns
ACCEPT udp ------ anywhere anywhere any ->
netbios-ns
ACCEPT tcp -y---- anywhere anywhere any ->
netbios-dgm
ACCEPT udp ------ anywhere anywhere any ->
netbios-dgm
ACCEPT tcp -y---- anywhere anywhere any ->
netbios-ssn
ACCEPT udp ------ anywhere anywhere any ->
netbios-ssn
ACCEPT tcp -y---- anywhere anywhere any ->
ssh
ACCEPT all ------ anywhere anywhere n/a
REJECT tcp -y---- anywhere anywhere any ->
any
REJECT udp ------ anywhere anywhere any ->
any
Chain forward (policy ACCEPT):
Chain output (policy ACCEPT):
Which looks good to me. So that leaves nmb.
With highest regards,
Tom
parris at isciences.com
Return-Path: <drankin at cox-internet.com>
Delivered-To: samba at us5.samba.org
Received: from io.cox-internet.com (unknown [208.180.118.41]) by
lists.samba.org (Postfix) with ESMTP id 33A874B10 for
<samba at us5.samba.org>; Mon, 11 Jun 2001 20:36:04 -0700 (PDT)
Received: from cox-internet.com ([66.76.40.151]) by io.cox-internet.com
(InterMail vK.4.02.00.10 201-232-116-110 license
dd72657b95c070b1853187e4f5a0d6a7) with ESMTP id
<20010612033344.LVFK29067.io at cox-internet.com>; Mon, 11 Jun 2001
22:33:44 -0500
Message-ID: <3B258DDB.72A2D974 at cox-internet.com>
Date: Mon, 11 Jun 2001 22:34:51 -0500
From: David Rankin <drankin at cox-internet.com>
X-Mailer: Mozilla 4.7 [en]C-NSCPCD (Win98; U)
X-Accept-Language: en
MIME-Version: 1.0
To: parris at isciences.com
Cc: Samba <samba at us5.samba.org>
Subject: Re: newbie problems.
References: <000601c0f2eb$63bbc3e0$3a28603f at CHERRYBLOSSOM>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
"Thomas M. Parris" wrote:
> Dear Samba team:
>
> I am hoping you can help a Samba newbie make some progress with your
> software.
>
> 1. Platform/network.
> Samba server: RedHat 7.1 (MYSERVER)
> Samba version: 2.0.8
>
> Client 1: Win 2K (W2K1)
> Client 2: Win 2K (W2K2)
> Client 3: Win 98 (W981)
>
> 2. Progress (and lack thereof) to date.
>
> A. I can mount shares from either of the Win 2K machines (with "net use
> ...")
> B. However, the Samba server does not appear in the network neigborhood for
> any client (nmb problem?)
> C. I can't connect at all from the Win 98 machine ("Error 53"). (Yes, I am
> using encrypted passwords.)
>
> 3. Progress with diagnostics
> (http://us2.samba.org/samba/docs/DIAGNOSIS.html)
>
> Test 1: testparms works without problem.
> Test 2: pings work in both directions.
> Test 3: smbclient -L MYSERVER works.
> Test 4: nmblookup -B MYSERVER __SAMBA__ works (sort of).
> I can't get it to work through xinetd. Only when I start nmbd as a
> deamon.
>
> My xinetd config for nmbd is:
>
> # default: on
> service netbios-ns
> {
> flags = REUSE
> protocol = upd
> socket_type = dgram
> wait = yes
> user = root
> server = /usr/sbin/nmbd
> log_on_failure += USERID
> disable = no
> }
>
> Test 5: nmblookup -B w2k1 '*'
> nmblookup -B w2k2 '*'
> nmblookup -B w981 '*'
>
> I don't have the client registered with DNS, so I am using their ip
> addresses.
> None of these lookups work. However, nmblookup -B MYSERVER does work.
>
> The diagnosis text suggests that this is a problem with the client
> softtware installation. However, these machines can all share files with
> each other without difficulty. They all appear in the network neighborhood
> without problem.
>
> Test 6: nmblookup -d 2 '*'
> This only returns the ip address for MYSERVER.
>
> Test 7: smbclient //MYSERVER/myshare
> Works fine.
>
> Test 8: net view \\MYSERVER
> Does not work. Though I can see all of the other clients with this
> method. I've tried adding the IP address of BIGSERVER to the "wins server"
> box in the advanced tcp/ip setup on the PC. No change in behaviour.
>
> Test 9: net use x: \\MYSERVER\myshare
> Works from the two WIN2K clients, but not from the WIN98 client.
>
> Test 10: nmblookup -M TESTGROUP
> Only returns the name of the samba server.
>
> Test 11: Fails from all three clients.
>
> I would be most grateful for any pointers. My guess is that this is a
> problem with nmb configuration and/or firewall settings. However,
> "ipchains --list" produces:
>
> Chain input (policy ACCEPT):
> target prot opt source destination ports
> ACCEPT tcp -y---- anywhere anywhere any ->
> netbios-ns
> ACCEPT udp ------ anywhere anywhere any ->
> netbios-ns
> ACCEPT tcp -y---- anywhere anywhere any ->
> netbios-dgm
> ACCEPT udp ------ anywhere anywhere any ->
> netbios-dgm
> ACCEPT tcp -y---- anywhere anywhere any ->
> netbios-ssn
> ACCEPT udp ------ anywhere anywhere any ->
> netbios-ssn
> ACCEPT tcp -y---- anywhere anywhere any ->
> ssh
> ACCEPT all ------ anywhere anywhere n/a
> REJECT tcp -y---- anywhere anywhere any ->
> any
> REJECT udp ------ anywhere anywhere any ->
> any
> Chain forward (policy ACCEPT):
> Chain output (policy ACCEPT):
>
> Which looks good to me. So that leaves nmb.
>
> With highest regards,
> Tom
> parris at isciences.com
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
Tom,
I have always had better luck running smb and ndb as daemons with the -D option. Post
a copy of you smb.conf and we will see if we can be of any more help. I have a LM7.2
server with Samba 2.09 and Win95, Win98 and WinME clients (noW2K). Everything works great!
--
David Rankin
Nacogdoches, Texas
Return-Path: <parris at isciences.com>
Delivered-To: samba at us5.samba.org
Received: from mr4.ash.ops.us.uu.net (mr4.ash.ops.us.uu.net
[198.5.241.89]) by lists.samba.org (Postfix) with ESMTP id 05E354CD5
for <samba at us5.samba.org>; Mon, 11 Jun 2001 20:48:35 -0700 (PDT)
Received: from CHERRYBLOSSOM by mr4.ash.ops.us.uu.net with SMTP (peer
crosschecked as: [63.96.40.58]) id QQktat07394; Tue, 12 Jun 2001
03:48:14 GMT
Reply-To: <parris at isciences.com>
From: "Thomas M. Parris" <parris at isciences.com>
To: "'David Rankin'" <drankin at cox-internet.com>
Cc: "'Samba'" <samba at us5.samba.org>
Subject: RE: newbie problems.
Date: Mon, 11 Jun 2001 23:50:35 -0400
Message-ID: <000101c0f2f2$d6f51fd0$3a28603f at CHERRYBLOSSOM>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0)
In-Reply-To: <3B258DDB.72A2D974 at cox-internet.com>
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
David,
Thanks for taking this on. Here is my smb.conf ...
[global]
workgroup = WORKGROUP
server string = Magnolia Samba Sever
hosts allow = 127.0.0.1 63.87.43.58 63.87.43.59 63.87.43.60 63.87.43.61
63.87.43.62
printcap name = /etc/printcap
load printers = yes
printing = lprng
log file = /var/log/samba/%m.log
max log size = 1000
security = user
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd
unix password sync = Yes
passwd program = /usr/bin/passwd %u
passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n
*passwd:*all*authentication*tokens*updated*successfully*
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
domain master = yes
preferred master = yes
wins support = yes
[homes]
comment = Home Directories
browseable = no
writable = yes
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
guest ok = no
printable = yes
[wkgrp]
comment = Workgroup
path = /home/wkgrp
valid users = @wkgrp
public = no
writeable = yes
printable = no
write list = @wkgrp
create mask = 0765
-----Original Message-----
From: samba-admin at lists.samba.org [mailto:samba-admin at lists.samba.org]On
Behalf Of David Rankin
Sent: Monday, June 11, 2001 11:35 PM
To: parris at isciences.com
Cc: Samba
Subject: Re: newbie problems.
"Thomas M. Parris" wrote:
> Dear Samba team:
>
> I am hoping you can help a Samba newbie make some progress with your
> software.
>
> 1. Platform/network.
> Samba server: RedHat 7.1 (MYSERVER)
> Samba version: 2.0.8
>
> Client 1: Win 2K (W2K1)
> Client 2: Win 2K (W2K2)
> Client 3: Win 98 (W981)
>
> 2. Progress (and lack thereof) to date.
>
> A. I can mount shares from either of the Win 2K machines (with
"net use
> ...")
> B. However, the Samba server does not appear in the network
neigborhood for
> any client (nmb problem?)
> C. I can't connect at all from the Win 98 machine ("Error 53").
(Yes, I am
> using encrypted passwords.)
>
> 3. Progress with diagnostics
> (http://us2.samba.org/samba/docs/DIAGNOSIS.html)
>
> Test 1: testparms works without problem.
> Test 2: pings work in both directions.
> Test 3: smbclient -L MYSERVER works.
> Test 4: nmblookup -B MYSERVER __SAMBA__ works (sort of).
> I can't get it to work through xinetd. Only when I start
nmbd as a
> deamon.
>
> My xinetd config for nmbd is:
>
> # default: on
> service netbios-ns
> {
> flags = REUSE
> protocol = upd
> socket_type = dgram
> wait = yes
> user = root
> server = /usr/sbin/nmbd
> log_on_failure += USERID
> disable = no
> }
>
> Test 5: nmblookup -B w2k1 '*'
> nmblookup -B w2k2 '*'
> nmblookup -B w981 '*'
>
> I don't have the client registered with DNS, so I am using
their ip
> addresses.
> None of these lookups work. However, nmblookup -B
MYSERVER does work.
>
> The diagnosis text suggests that this is a problem with
the client
> softtware installation. However, these machines can all share files with
> each other without difficulty. They all appear in the network
neighborhood
> without problem.
>
> Test 6: nmblookup -d 2 '*'
> This only returns the ip address for MYSERVER.
>
> Test 7: smbclient //MYSERVER/myshare
> Works fine.
>
> Test 8: net view \\MYSERVER
> Does not work. Though I can see all of the other clients
with this
> method. I've tried adding the IP address of BIGSERVER to the "wins server"
> box in the advanced tcp/ip setup on the PC. No change in behaviour.
>
> Test 9: net use x: \\MYSERVER\myshare
> Works from the two WIN2K clients, but not from the WIN98
client.
>
> Test 10: nmblookup -M TESTGROUP
> Only returns the name of the samba server.
>
> Test 11: Fails from all three clients.
>
> I would be most grateful for any pointers. My guess is that this is a
> problem with nmb configuration and/or firewall settings. However,
> "ipchains --list" produces:
>
> Chain input (policy ACCEPT):
> target prot opt source destination ports
> ACCEPT tcp -y---- anywhere anywhere any ->
> netbios-ns
> ACCEPT udp ------ anywhere anywhere any ->
> netbios-ns
> ACCEPT tcp -y---- anywhere anywhere any ->
> netbios-dgm
> ACCEPT udp ------ anywhere anywhere any ->
> netbios-dgm
> ACCEPT tcp -y---- anywhere anywhere any ->
> netbios-ssn
> ACCEPT udp ------ anywhere anywhere any ->
> netbios-ssn
> ACCEPT tcp -y---- anywhere anywhere any ->
> ssh
> ACCEPT all ------ anywhere anywhere n/a
> REJECT tcp -y---- anywhere anywhere any ->
> any
> REJECT udp ------ anywhere anywhere any ->
> any
> Chain forward (policy ACCEPT):
> Chain output (policy ACCEPT):
>
> Which looks good to me. So that leaves nmb.
>
> With highest regards,
> Tom
> parris at isciences.com
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
Tom,
I have always had better luck running smb and ndb as daemons with the -D
option. Post
a copy of you smb.conf and we will see if we can be of any more help. I have
a LM7.2
server with Samba 2.09 and Win95, Win98 and WinME clients (noW2K).
Everything works great!
--
David Rankin
Nacogdoches, Texas
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <attef1 at hq.psa.com.sg>
Delivered-To: samba at lists.samba.org
Received: from globalhub.psa.com.sg (unknown [203.120.36.11]) by
lists.samba.org (Postfix) with ESMTP id 84C694B18 for
<samba at lists.samba.org>; Mon, 11 Jun 2001 21:08:25 -0700 (PDT)
Received: from tpcpfsvr.psa (hq.psa.com.sg [172.18.64.3]) by
globalhub.psa.com.sg (8.9.1/8.9.1) with ESMTP id LAA16579 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 11:52:20 +0800 (SGT)
Received: by tpcpfsvr.psa with Internet Mail Service (5.5.2653.19) id
<MT74G8CD>; Tue, 12 Jun 2001 12:06:24 +0800
Message-ID: <4E6D5F09E791D41192ED00D0B78F7B3502964CDE at tpcxsvr1.psa>
From: "ERIC FERNANDEZ, ITID" <attef1 at hq.psa.com.sg>
To: "'samba at lists.samba.org'" <samba at lists.samba.org>
Subject: samba-vos - problem with authentication with WinNT
Date: Tue, 12 Jun 2001 12:06:14 +0800
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi there,
I have installed samba-vos (on a Stratus Continuum machine - using vos
operating system)
Currently I'm able to browse my vos machine thanks to samba from a WIN 98
pc. I'm trying to fine tune the security on samba-vos.
Currently security = share based on host allow = subnets.
My Problem:
Whenever I put security = server and password server = w.x.y.z, I get my WIN
98 asking for authentication for my network password, which is fine and
good.
ex.
You must provide a password to make this connection
Resource \\PSA_T3\IPC$
password:
The password supplied is always rejected.
I want my WinNT PDC to authenticate the password, I believe the samba would
fetch the user-id and password and send it to the PDC for authentication,
whereby upon confirmation I would be able to view my resources on my Stratus
machine.. but it doesn't seem to work..not sure why is that..
my smb.conf is as follows ( important lines only)
security = server
password server = w.x.y.z
include = >siemens>samba>lib>smb.conf.%m
; wins server = w.x.y.z
dns proxy = no
hosts allow = w.x.y. 127.
; encrypt passwords = yes
; user = dafef1
I read the doc on - "making password as clear text, WinNT & 95,
security_level, etc" but still not successful. I know it works on linux
because I have a colleague who has done it..
Any help would be grateful..
thx
This communication contains confidential or privileged information. If you
are not the intended recipient, please notify us IMMEDIATELY that you have
received it and destroy it. We are not liable for any unauthorised sending
of or interference with this communication.
Return-Path: <krivka at carmagnus.cz>
Delivered-To: samba at samba.org
Received: from vega.inec.cz (vega.inec.cz [212.47.0.2]) by
lists.samba.org (Postfix) with ESMTP id ECA1A4D02 for
<samba at samba.org>; Mon, 11 Jun 2001 22:27:36 -0700 (PDT)
Received: from unspecified.host (mail.carmagnus.cz [212.47.14.42]) by
vega.inec.cz (8.9.3/8.9.3) with SMTP id HAA31366 for
<samba at samba.org>; Tue, 12 Jun 2001 07:27:00 +0200
Received: from 192.168.1.25 ([192.168.1.25]) by 192.168.1.66 (WinRoute
Pro 4.1) with SMTP; Tue, 12 Jun 2001 07:20:03 +0200
Message-ID: <008001c0f2fe$db70ed80$1901a8c0 at carmagnus.cz>
From: =?iso-8859-2?Q?Michal_K=F8ivka?= <krivka at carmagnus.cz>
To: <samba at samba.org>
Subject: smbd not running
Date: Tue, 12 Jun 2001 07:16:36 +0200
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-2"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4133.2400
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Samba 2.2.0 on SuSE 6.4
when starting smbd -D , log reports:"lib/util_sock.c: open_socket_in(853)
bind failed on port 139 socket_addr = 0.0.0.0 Address already in use" and
smbd is unloaded.
ps -ax seems, that nothing interesting is running, but I am not guru ...
What can I do with?
Michal Kxivka
krivka at carmagnus.cz
www.carmagnus.cz
068-541 80 16
0602-184 980
Return-Path: <barth at cck.uni-kl.de>
Delivered-To: samba at samba.org
Received: from mail.uni-kl.de (mail.uni-kl.de [131.246.137.52]) by
lists.samba.org (Postfix) with ESMTP id D238C4B53 for
<samba at samba.org>; Mon, 11 Jun 2001 22:55:23 -0700 (PDT)
Received: from enterprise.cck.uni-kl.de (enterprise.cck.uni-kl.de
[131.246.239.10]) by mail.uni-kl.de (8.11.0/8.11.0) with ESMTP id
f5C5t2c05454; Tue, 12 Jun 2001 07:55:02 +0200 (MET DST)
Received: from fbk.mv.uni-kl.de (fbk.mv.uni-kl.de [131.246.201.62]) by
enterprise.cck.uni-kl.de (8.9.2/8.9.2) with ESMTP id HAA20628; Tue, 12
Jun 2001 07:55:01 +0200 (MET DST)
Received: from fbk42-7 (fbk42-7.mv.uni-kl.de [131.246.201.77]) by
fbk.mv.uni-kl.de (8.9.1/8.9.1) with ESMTP id HAA11982; Tue, 12 Jun
2001 07:55:02 +0200
From: "Christian Barth" <barth at cck.uni-kl.de>
To: "'samba at samba.org'" <samba at samba.org>, "White, Franklin D
(Franklin)** CTR **" <fdwhite at lucent.com>
Date: Tue, 12 Jun 2001 07:55:01 +0200
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
Subject: Re: Installing Samba on Sun sparc
Message-ID: <3B25CAD5.12497.178A34 at localhost>
Priority: normal
In-reply-to: <CAC7690B8176D21186D100805F3131C703525B8E at GA3699EXCH002U>
X-mailer: Pegasus Mail for Win32 (v3.12c)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
> Samba has been installed onto a Sun sparc server bu I have not been able to
> connect to the sharedrives. The SA who performed this installation is new to
> installing Samba and does not have a feel as to what the problem might be.
>
> I can connect to the sharedrive only with a PC loaded with Win2000 by
> passing the Unix userid/password. I cannot connect on any of the Win95 PCs
> and unfortunately all of the users have Win95 installed. The setup desired
> was to be able to have all the user's connected without passing
> userid/password and hopefully not having to create a user account on the
> server.
You need userid/password or guest access. If you are using guest
access, the server will not be able to destinguish between your W95
users. All files will be owned by the one guest user.
W95 is tricky, because you can enter only a password when connecting
to the shares. The user name is hidden some where in the login to the
W95-PC (or in the network preferences?). You can try to conect to
\\server\share%user. I have read about it, but never sucessfully
tried.
>
> We currently have Samba running on PC loaded with Linux that the users have
> access to. The SA who installed this unfortunately have moved on and cannot
> provide insight into what we need.
Go to the Linux box, and find smb.conf (/etc/smb.conf,
/usr/local/samba/lib/smb.conf, "locate smb.conf", "find / -name
smb.conf", .... Open it with a text editor and you will see what he
has configured. Coution: there may be more then 1 smb.conf on the
box, but only one it aktually used.
> I have been viewing the documentation for Samba installation but cannot find
> anything for installation on a Unix platform.
>
> Is there a solution available which I cannot find in the online
> documentation?
In the tar-ball with the source is a lot of documentation. Probably
read UNIX_INSTALL.txt. Lock at the sampels for smb.conf. Read the man
pages. Personaly I recommend everybody to read man smb.conf form the
fist to the last line.
Christian
_______________________________________________________________________
In a world without walls and fences, who needs windows and gates? (SUN)
Return-Path: <VladutaC at ca-ib.com>
Delivered-To: samba at lists.samba.org
Received: from vie-cs3.ca-ib.com (mail1.ca-ib.com [212.27.124.49]) by
lists.samba.org (Postfix) with ESMTP id 3DABB4C12 for
<samba at lists.samba.org>; Mon, 11 Jun 2001 23:44:00 -0700 (PDT)
Received: by vie-cs3.ca-ib.com with Internet Mail Service (5.5.2653.19)
id <MWS6QG3Z>; Tue, 12 Jun 2001 08:43:38 +0200
Message-ID: <F131C3737223D111962300805F0DD08F3CF56C at buh-cs0.ca-ib.com>
From: Vladuta Cristian <VladutaC at ca-ib.com>
To: "'Samba (E-mail)" <samba at lists.samba.org>
Subject: Mapping samba shares takes too long !?
Date: Tue, 12 Jun 2001 08:43:35 +0200
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi Guys,
I just turned a Compaq Proliant (Raid5 8 GB logical drive) NT 4.0 Member
Server into a Linux 7 Samba 2.0.7 release Server while maintaining the file
server role. The Clients are W9X, NT, W2K. Security level on the Linux box
is share based ( public access ).
To my surprise , the Linux-Samba solution has a slower response on file
access. But what is more frustrating comes from the NET USE scripts on
client machines that now take 1-2 minutes to run for mapping a linux share!
I must say I am a bit disappointed. Is there something I miss regarding the
netbios name resoution ? Why is taking that long to map the samba names ?
Any experience on fine-tuning that?
Thanx,
Cristian Vladuta
Sys Admin ,CA IB Securities, CA IB Romania
Phone +401 315 20 30
Fax +401 315 20 90
Return-Path: <alsim3 at yahoo.com>
Delivered-To: samba at samba.org
Received: from smtp018.mail.yahoo.com (smtp018.mail.yahoo.com
[216.136.174.115]) by lists.samba.org (Postfix) with SMTP id 8E8194CEC
for <samba at samba.org>; Mon, 11 Jun 2001 23:46:15 -0700 (PDT)
Received: from j122.kch20.jaring.my (161.142.55.136) by
smtp.mail.vip.sc5.yahoo.com with SMTP; 12 Jun 2001 06:45:54 -0000
X-Apparently-From: <alsim3 at yahoo.com>
Date: Tue, 12 Jun 2001 14:51:09 +0800
From: Alvin Sim <alsim3 at yahoo.com>
X-Mailer: The Bat! (v1.52f)
Reply-To: Alvin Sim <alsim3 at yahoo.com>
Organization: n/a
Message-ID: <242891147.20010612145109 at yahoo.com>
To: samba at samba.org
Subject: how do i...
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
hello...
it may sound silly but how _do_ i login to my samba server? i am
currently running freebsd-4.3-stable and samba-2.0.8 in a small
workgroup consisting of 4 win95 and win98 workstations. the freebsd
server currently has only 3 users (none of which can logon thru samba
except ssh or telnet). so, until i get this (logging in) to work, i wont
be adding any user(s) to the server.
if someone is willing to help me take a look, and maybe help me spot the
problems or that i've missed something that needs added to smb.conf,
here's my smb.conf:-
---start of smb.conf
# Samba config file created using SWAT
# from as5.psb.org (192.168.0.5)
# Date: 2001/05/23 16:31:34
# Global parameters
[global]
workgroup = PROMESYS
netbios name = AS1
server string = Promesys Samba Server %v on (%L)
; hosts allow = 192.168.0. 127.
interfaces = 192.168.0.1/24
min password length = 5
log file = /var/log/samba/log.%m
security = user
; encrypt passwords = yes
max log size = 50
socket options = TCP_NODELAY
local master = yes
os level = 33
preferred master = Yes
; domain logons = yes
dns proxy = No
wins support = Yes
remote announce = 192.168.0.255/PROMESYS
unix realname = Yes
; guest account = guest
admin users = alvin
[homes]
comment = Home Directories
writeable = Yes
browseable = Yes
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes
[printers]
comment = All Printers
path = /var/spool/samba
printable = Yes
browseable = No
[tmp]
comment = Temporary file space
path = /tmp
read only = no
public = yes
[hanlj]
comment = Han's Folder
path = /home/hanlj
; valid users = hanlj
public = no
writable = yes
printable = no
[brians]
comment = Brian's Folder
path = /home/brians
; valid users = brians
public = no
writable = yes
printable =no
;[ports]
; comment = Ports Collection
; path = /usr/ports
; guest ok = Yes
;[cdrom]
; comment = CDROM
; path = /cdrom
; guest ok = Yes
---end of smb.conf
thanks.
--as
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Return-Path: <tonyh at mailweb.menzies.edu.au>
Delivered-To: samba at lists.samba.org
Received: from mailweb.menzies.edu.au (mailweb.menzies.edu.au
[192.94.208.158]) by lists.samba.org (Postfix) with ESMTP id 644ED42EF
for <samba at lists.samba.org>; Tue, 12 Jun 2001 00:40:29 -0700 (PDT)
Received: (from root at localhost) by mailweb.menzies.edu.au (8.9.3/8.9.3)
id RAA06101; Tue, 12 Jun 2001 17:14:03 +0930
From: "Tony House" <tonyh at menzies.edu.au>
To: "Paul Sanders " <sanders_p at univerahealthcare.org>
Cc: <samba at lists.samba.org>
Date: Tue, 12 Jun 2001 07:44:03 +0000 (GMT)
Organization: Menzies School of Health Research
X-Mailer: ObsidianSystems-OcsEmail1-0-30 brewed at www.obsidian.co.za
Reply-To: Tony.House at menzies.edu.au
In-Reply-to: _sb1c9b9f.078 at hcpnw1_
Message-ID: <9923318436096-1217146096tonyh at menzies.edu.au>
Priority: Normal
Subject: Re: Re: Samba processes not terminating on server
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Thanks for that Paul.
As it happens that did not fix this problem, but it is
a useful parameter to be aware of.
We have been able to identify the source of the problem
and so set up a work around. On our Windows 95 and 98
clients there is a command in the Startup folder that
executes a file residing on a Samba share. This file
has become corrupted in some marginal fashion and hangs
on any client executing it. It takes an "End Task" to
get past it.
But it appears that when the client encounters this
corrupt binary file, 2 or 3 Samba process are created
relating to the share the file is on. Ending that task
DOES NOT kill those Samba processes, and they do not
terminate without being explicitly "killed" in unix on
the Samba server.
And just to make the whole thing even stranger. We can
copy that binary - copy using unix - to another Samba
share on another machine and there is no problem.
Cute.
Tony.
On Tue, 05 Jun 2001 Paul Sanders wrote:
> Tony:
>
> We saw this with Samba 2.2.0 on va-rhl 6.2.4...
>
> try setting the deadtime= parameter in smb.conf. we are using deadtime=15
> with good results [we have ~ 1200 users and were getting swamped until we set
> this.]
>
> good luck.
>
> paul sanders
>
>
>
>
> >>> Tony House 06/05 5:35 AM >>>
> Hello People.
>
> We are trying to run Samba 2.0.9 on a Sun Sparc running
> Solaris 7. Nothing fancy - just disc and printer
> sharing.
>
> It almost works perfectly . . .
>
> Except:
> The processes that start on the Sunserver when a user
> logs in on a PC DO NOT terminate when that user logs
> out. The result is a ridiculous number of smb
> processes running for a fairly small number of PCs.
>
> Users are experiencing uncertain access to disc shares;
> failure to find and/or save files to shares etc.
>
> Has anyone run across this sort of thing before?
> Any suggestions for a solution?
>
> Tony.
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
>
Return-Path: <nikolaus at erlm.siemens.de>
Delivered-To: samba at samba.org
Received: from atlantis.erlm.siemens.de (atlantis.erlm.siemens.de
[212.114.202.14]) by lists.samba.org (Postfix) with ESMTP id 04A4A4D1D
for <samba at samba.org>; Tue, 12 Jun 2001 00:42:09 -0700 (PDT)
Received: from tcenter.erlm.siemens.de (tcenter.erlm.siemens.de
[146.254.160.14]) by atlantis.erlm.siemens.de (8.9.3/8.9.3) with ESMTP
id JAA20939; Tue, 12 Jun 2001 09:41:44 +0200 (MET DST)
Received: from luxor.erlm.siemens.de (luxor.erlm.siemens.de
[146.254.161.114]) by tcenter.erlm.siemens.de (8.9.0/8.9.0) with ESMTP
id JAA26584; Tue, 12 Jun 2001 09:41:43 +0200 (MET DST)
Received: (from nikolaus at localhost) by luxor.erlm.siemens.de
(8.9.3/8.9.3) id JAA09554; Tue, 12 Jun 2001 09:41:42 +0200 (MET DST)
Date: Tue, 12 Jun 2001 09:41:42 +0200
From: Michael Ott <Michael.Ott at erlm.siemens.de>
To: Michal K?ivka <krivka at carmagnus.cz>
Cc: samba at samba.org
Subject: Re: smbd not running
Message-ID: <20010612094142.A9123 at erlm.siemens.de>
Reply-To: Michael.Ott at erlm.siemens.de
References: <008001c0f2fe$db70ed80$1901a8c0 at carmagnus.cz>
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 7bit
X-Mailer: Mutt 1.0i
In-Reply-To: <008001c0f2fe$db70ed80$1901a8c0 at carmagnus.cz>; from
krivka at carmagnus.cz on Tue, Jun 12, 2001 at 07:16:36AM +0200
Organization: Siemens AG, ATD IT PS 51 ERL, Erlangen, Germany
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
hallo!
> when starting smbd -D , log reports:"lib/util_sock.c: open_socket_in(853)
> bind failed on port 139 socket_addr = 0.0.0.0 Address already in use" and
> smbd is unloaded.
> ps -ax seems, that nothing interesting is running, but I am not guru ...
> What can I do with?
do you have use testparm to test your configuration?
first i try this, with debug level = 10
Gru_ & bye
Michael Ott
---------------------------------
- Siemens AG - I&S IT PS 51 ERL -
- Werner-von-Siemens-Strasse 60 -
- 91050 Erlangen -
- Tel. +49 91 31 7 42 0 54 -
- Michael.Ott at erlm.siemens.de -
---------------------------------
open-source and you have much fun
Return-Path: <moten at soneri.com>
Delivered-To: samba at samba.org
Received: from 202.87.109.244 (soneri.fnsl.net [202.87.109.244]) by
lists.samba.org (Postfix) with ESMTP id 7F9194D40 for
<samba at samba.org>; Tue, 12 Jun 2001 00:54:58 -0700 (PDT)
Received: from ciscoworks [10.10.2.46] by 202.87.109.244 (SMTPD32-5.08)
id A3D4117D0186; Tue, 12 Jun 2001 12:58:12 +0100
Message-ID: <011701c0f316$80c13670$2e020a0a at ciscoworks>
From: "Saad Moten" <moten at soneri.com>
To: <samba at samba.org>
Subject: Browsing workgroups on remote subnets
Date: Tue, 12 Jun 2001 13:05:53 +0500
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Mailer: Microsoft Outlook Express 5.00.2314.1300
X-Converted-To-Plain-Text: from multipart/alternative by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
I read your article on net, I have facing similar problem, do you got the
solution of Browsing Workgroups, if you got the solution please guide me.
Thank you in Advance.
Regards.
Saad Moten.
Return-Path: <jean_christian at hotmail.com>
Delivered-To: samba at samba.org
Received: from hotmail.com (f57.law11.hotmail.com [64.4.17.57]) by
lists.samba.org (Postfix) with ESMTP id 07C2C4D33 for
<samba at samba.org>; Tue, 12 Jun 2001 01:12:00 -0700 (PDT)
Received: from mail pickup service by hotmail.com with Microsoft
SMTPSVC; Tue, 12 Jun 2001 01:11:40 -0700
Received: from 202.33.252.82 by lw11fd.law11.hotmail.msn.com with HTTP;
Tue, 12 Jun 2001 08:11:40 GMT
X-Originating-IP: [202.33.252.82]
From: "Jean-Christian Imbeault" <jean_christian at hotmail.com>
To: samba at samba.org
Subject: Users and groups under Samba?
Date: Tue, 12 Jun 2001 08:11:40 -0000
Mime-Version: 1.0
Content-Type: text/plain; format=flowed
Message-ID: <F57tyi67EKRuYDlrjbu00007480 at hotmail.com>
X-OriginalArrivalTime: 12 Jun 2001 08:11:40.0763 (UTC)
FILETIME=[4F5C72B0:01C0F317]
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I know this is a simple question but I have been racking my brains over it
for a week now and still I can't get the concept of samba users and groups
vs unix users and groups straight.
Here's my conf file:
[top40]
comment = HMV TOP40 INTL & JPOP
path = /home/httpd/html/top40
valid users = @top40
writable = yes
printable = no
I want to the folder to be accessible by anyone in the top40 group. I made
the unix directory and all the files be owned by the group top40 and owned
by a specific user in that group.
I have created a user, jc.imbeault, and put him in the Unix top40 group.
(But he does not own the files in the top40 share, another top40 user does).
[root at top40 conf]# cat /etc/group | grep jc
jc.imbeault:x:506:
top40:x:508:nobody,jc.imbeault
and I have run smbpasswd -a jc.imbeault to add the user and give him a
password (same as the unix one).
When I try to access the share I get a request for a username and password,
I enter them and I can browse the share.
But I cannot create any new files or delete any files. I get an access
denied message.
I thought that since the user is in the proper group he should be able to do
anything with that share ...
What concept did I not quite grasp?
Jc
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Return-Path: <jean_christian at hotmail.com>
Delivered-To: samba at samba.org
Received: from hotmail.com (f218.law11.hotmail.com [64.4.17.218]) by
lists.samba.org (Postfix) with ESMTP id D289F4D2E for
<samba at samba.org>; Tue, 12 Jun 2001 01:15:08 -0700 (PDT)
Received: from mail pickup service by hotmail.com with Microsoft
SMTPSVC; Tue, 12 Jun 2001 01:14:49 -0700
Received: from 202.33.252.82 by lw11fd.law11.hotmail.msn.com with HTTP;
Tue, 12 Jun 2001 08:14:49 GMT
X-Originating-IP: [202.33.252.82]
From: "Jean-Christian Imbeault" <jean_christian at hotmail.com>
To: samba at samba.org
Subject: Access a share as a different user than before?
Date: Tue, 12 Jun 2001 08:14:49 -0000
Mime-Version: 1.0
Content-Type: text/plain; format=flowed
Message-ID: <F218wPiyAphwFutJLto000073f4 at hotmail.com>
X-OriginalArrivalTime: 12 Jun 2001 08:14:49.0315 (UTC)
FILETIME=[BFBF3330:01C0F317]
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
When I access a restricted samba share my win2k machine is given a token so
that I don:t have to always to give a username and password.
But ...
1- if I access a share as one user but then want to close the connection and
access it as another, how can I do that?
2- how can I make samba *always* ask for a username and password? I.e. make
it so the client cannot use a token but must suplly the username and
password everytime?
Jc
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Return-Path: <jean_christian at hotmail.com>
Delivered-To: samba at samba.org
Received: from hotmail.com (f115.law11.hotmail.com [64.4.17.115]) by
lists.samba.org (Postfix) with ESMTP id 2A5EE4D4C for
<samba at samba.org>; Tue, 12 Jun 2001 01:38:03 -0700 (PDT)
Received: from mail pickup service by hotmail.com with Microsoft
SMTPSVC; Tue, 12 Jun 2001 01:37:42 -0700
Received: from 202.33.252.82 by lw11fd.law11.hotmail.msn.com with HTTP;
Tue, 12 Jun 2001 08:37:42 GMT
X-Originating-IP: [202.33.252.82]
From: "Jean-Christian Imbeault" <jean_christian at hotmail.com>
To: samba at samba.org
Subject: Credential conflict?
Date: Tue, 12 Jun 2001 08:37:42 -0000
Mime-Version: 1.0
Content-Type: text/plain; format=flowed
Message-ID: <F115WDKpzxDPHprp5yL000085f2 at hotmail.com>
X-OriginalArrivalTime: 12 Jun 2001 08:37:42.0441 (UTC)
FILETIME=[F2319990:01C0F31A]
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
When I try an access a share on one Linux machine I get in. But when I try a
different chare on another Linux samba server I get:
"\\10.x.x.x\www is not accessible. The credentials conflict with an existing
set of credentials."
Does this mean that I have to log on to any and all samba servers always as
the same person?
I did try that but still the second machine gives me the same error.
Jc
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Return-Path: <chihchun at kalug.linux.org.tw>
Delivered-To: samba at lists.samba.org
Received: from kalug.ks.edu.tw (kalug.ks.edu.tw [163.16.4.8]) by
lists.samba.org (Postfix) with ESMTP id DF9B64D1C; Tue, 12 Jun 2001
01:47:27 -0700 (PDT)
Received: from localhost (chihchun at localhost) by kalug.ks.edu.tw
(8.9.3/8.9.3) with ESMTP id QAA29795; Tue, 12 Jun 2001 16:34:31 +0800
Date: Tue, 12 Jun 2001 16:34:31 +0800 (CST)
From: Rex Tsai <chihchun at kalug.linux.org.tw>
X-Sender: chihchun at kalug.ks.edu.tw
To: samba at lists.samba.org
Cc: chihchun at kalug.linux.org.tw, samba-patches at lists.samba.org,
samba-technical at lists.samba.org, smb-clients at lists.samba.org
Subject: Improved smbclient resume support.
Message-ID: <Pine.LNX.4.10.10106121623020.29769-100000 at kalug.ks.edu.tw>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Sorry, I'm newbie. :(
send this again.
This patch added "reget" "hash" and "tick" commands.
It's very useful when download big files from internet. :-)
-Rex
Best Regards, <chihchun_at_kalug.linux.org.tw>
--
--- samba-2.0.9.orig/source/client/client.c Wed Apr 18 07:00:52 2001
+++ samba-2.0.9/source/client/client.c Mon Jun 11 21:37:16 2001
@@ -49,6 +49,8 @@
static int process_tok(fstring tok);
static void cmd_help(void);
+static void cmd_hash(void);
+static void cmd_tick(void);
/* 30 second timeout on most commands */
#define CLIENT_TIMEOUT (30*1000)
@@ -57,6 +59,9 @@
/* value for unused fid field in trans2 secondary request */
#define FID_UNUSED (0xFFFF)
+#define HASHBYTES 1024
+#define TICKBYTES 10240
+
time_t newer_than = 0;
int archive_level = 0;
@@ -77,6 +82,8 @@
mode_t myumask = 0755;
BOOL prompt = True;
+BOOL hash = False;
+BOOL tick = False;
int printmode = 1;
@@ -651,6 +658,7 @@
uint16 attr;
size_t size;
off_t nread = 0;
+ off_t hashbytes = HASHBYTES;
GetTimeOfDay(&tp_start);
@@ -703,10 +711,29 @@
DEBUG(0,("Error writing local file\n"));
break;
}
-
+
+ if (hash) {
+ while (nread >= hashbytes) {
+ (void) putchar('#');
+ hashbytes += HASHBYTES;
+ }
+ (void) fflush(stdout);
+ }
+ if (tick && (nread >= hashbytes)) {
+ printf("\rBytes transferred: %ld", nread);
+ (void) fflush(stdout);
+ while (nread >= hashbytes)
+ hashbytes += TICKBYTES;
+ }
+
nread += n;
}
+ if (hash || tick) {
+ (void) putchar('\n');
+ (void) fflush(stdout);
+ }
+
if (nread < size) {
DEBUG (0, ("Short read when getting file %s. Only got %ld bytes.\n",
rname, (long)nread));
@@ -770,6 +797,198 @@
do_get(rname, lname);
}
+/****************************************************************************
+ get a file from rname to lname
+ ****************************************************************************/
+static void do_reget(char *rname,char *lname)
+{
+ int handle=0,fnum;
+ BOOL newhandle = False;
+ char *data;
+ struct timeval tp_start;
+ int read_size = io_bufsize;
+ uint16 attr;
+ size_t size;
+ off_t nread = 0;
+ off_t hashbytes = HASHBYTES;
+
+ GetTimeOfDay(&tp_start);
+
+ if (lowercase) {
+ strlower(lname);
+ }
+
+ fnum = cli_open(cli, rname, O_RDONLY, DENY_NONE);
+
+ if (fnum == -1) {
+ DEBUG(0,("%s opening remote file %s\n",cli_errstr(cli),rname));
+ return;
+ }
+
+ if(!strcmp(lname,"-")) {
+ handle = fileno(stdout);
+ } else {
+ struct stat stbuf;
+ int ret;
+
+ ret = stat(lname, &stbuf);
+ if (ret < 0) {
+ DEBUG(2, ("local: %s: %s\n", lname, strerror(errno)));
+ return;
+ }
+
+ nread = stbuf.st_size;
+ handle = sys_open(lname, O_RDWR, 0);
+ lseek(handle, (long)nread, 0);
+ newhandle = True;
+ }
+ if (handle < 0) {
+ DEBUG(0,("Error opening local file %s\n",lname));
+ return;
+ }
+
+
+ if (!cli_qfileinfo(cli, fnum,
+ &attr, &size, NULL, NULL, NULL, NULL, NULL) &&
+ !cli_getattrE(cli, fnum,
+ &attr, &size, NULL, NULL, NULL)) {
+ DEBUG(0,("getattrib: %s\n",cli_errstr(cli)));
+ return;
+ }
+
+ DEBUG(2,("regetting file %s of size %.0f as %s ",
+ lname, (double)size, lname));
+
+ if(!(data = (char *)malloc(read_size))) {
+ DEBUG(0,("malloc fail for size %d\n", read_size));
+ cli_close(cli, fnum);
+ return;
+ }
+
+ while (1) {
+ int n = cli_read(cli, fnum, data, nread, read_size);
+
+ if (n <= 0) break;
+
+ if (writefile(handle,data, n) != n) {
+ DEBUG(0,("\nError writing local file: %s\n", strerror(errno)));
+ break;
+ }
+
+ if (hash) {
+ while (nread >= hashbytes) {
+ (void) putchar('#');
+ hashbytes += HASHBYTES;
+ }
+ (void) fflush(stdout);
+ }
+ if (tick && (nread >= hashbytes)) {
+ printf("\rBytes transferred: %ld", nread);
+ (void) fflush(stdout);
+ while (nread >= hashbytes)
+ hashbytes += TICKBYTES;
+ }
+
+ nread += n;
+ }
+
+ if (hash || tick) {
+ (void) putchar('\n');
+ (void) fflush(stdout);
+ }
+
+ if (nread < size) {
+ DEBUG (0, ("Short read when getting file %s. Only got %ld bytes.\n",
+ rname, (long)nread));
+ }
+
+ free(data);
+
+ if (!cli_close(cli, fnum)) {
+ DEBUG(0,("Error %s closing remote file\n",cli_errstr(cli)));
+ }
+
+ if (newhandle) {
+ close(handle);
+ }
+
+ if (archive_level >= 2 && (attr & aARCH)) {
+ cli_setatr(cli, rname, attr & ~(uint16)aARCH, 0);
+ }
+
+ {
+ struct timeval tp_end;
+ int this_time;
+
+ GetTimeOfDay(&tp_end);
+ this_time =
+ (tp_end.tv_sec - tp_start.tv_sec)*1000 +
+ (tp_end.tv_usec - tp_start.tv_usec)/1000;
+ get_total_time_ms += this_time;
+ get_total_size += nread;
+
+ DEBUG(2,("(%g kb/s) (average %g kb/s)\n",
+ nread / (1.024*this_time + 1.0e-4),
+ get_total_size / (1.024*get_total_time_ms)));
+ }
+}
+
+
+/****************************************************************************
+ get file restarting at end of local file
+ ****************************************************************************/
+static void cmd_reget(void)
+{
+ pstring lname;
+ pstring rname;
+ char *p;
+
+ pstrcpy(rname,cur_dir);
+ pstrcat(rname,"\\");
+
+ p = rname + strlen(rname);
+
+ if (!next_token(NULL,p,NULL,sizeof(rname)-strlen(rname))) {
+ DEBUG(0,("reget <filename>\n"));
+ return;
+ }
+ pstrcpy(lname,p);
+ dos_clean_name(rname);
+
+ next_token(NULL,lname,NULL,sizeof(lname));
+
+ do_reget(rname, lname);
+}
+
+/****************************************************************************
+ toggle hash mark printing during transfers.
+ ****************************************************************************/
+static void cmd_hash(void)
+{
+ hash = !hash;
+ if (hash && tick)
+ cmd_tick();
+
+ DEBUG(2,("Hash mark printint %s", hash ? "on" : "off" ));
+ if (hash)
+ DEBUG(2,(" (%d bytes/hash mark)", HASHBYTES));
+ DEBUG(2,("\n"));
+}
+
+/****************************************************************************
+ toggle printing byte counter during transfers
+ ****************************************************************************/
+static void cmd_tick(void)
+{
+ tick = !tick;
+ if (hash && tick)
+ cmd_hash();
+
+ DEBUG(2, ("Tick counter printing %s", tick ? "on" : "off"));
+ if (tick)
+ DEBUG(2,(" (%d bytes/tick increment)", TICKBYTES));
+ DEBUG(2,("\n"));
+}
/****************************************************************************
do a mget operation on one file
@@ -988,6 +1207,7 @@
int fnum;
FILE *f;
int nread=0;
+ int hashbytes = HASHBYTES;
char *buf=NULL;
int maxwrite=io_bufsize;
@@ -1039,9 +1259,28 @@
break;
}
+ if (hash) {
+ while (nread >= hashbytes) {
+ (void) putchar('#');
+ hashbytes += HASHBYTES;
+ }
+ (void) fflush(stdout);
+ }
+ if (tick && (nread >= hashbytes)) {
+ printf("\rBytes transferred: %ld", nread);
+ (void) fflush(stdout);
+ while (nread >= hashbytes)
+ hashbytes += TICKBYTES;
+ }
+
nread += n;
}
+ if (hash || tick) {
+ (void) putchar('\n');
+ (void) fflush(stdout);
+ }
+
if (!cli_close(cli, fnum)) {
DEBUG(0,("%s closing remote file %s\n",cli_errstr(cli),rname));
fclose(f);
@@ -1658,6 +1897,9 @@
{"cd",cmd_cd,"[directory] change/report the remote directory",{COMPL_REMOTE,COMPL_NONE}},
{"pwd",cmd_pwd,"show current remote directory (same as 'cd' with no args)",{COMPL_NONE,COMPL_NONE}},
{"get",cmd_get,"<remote name> [local name] get a file",{COMPL_REMOTE,COMPL_LOCAL}},
+ {"reget",cmd_reget,"get file restarting at end of local file",{COMPL_REMOTE,COMPL_LOCAL}},
+ {"hash",cmd_hash,"toggle printing `#' for each buffer transferred",{COMPL_REMOTE,COMPL_LOCAL}},
+ {"tick",cmd_tick,"toggle printing byte counter during transfers",{COMPL_REMOTE,COMPL_LOCAL}},
{"mget",cmd_mget,"<mask> get all the matching files",{COMPL_REMOTE,COMPL_NONE}},
{"put",cmd_put,"<local name> [remote name] put a file",{COMPL_LOCAL,COMPL_REMOTE}},
{"mput",cmd_mput,"<mask> put all matching files",{COMPL_REMOTE,COMPL_NONE}},
Return-Path: <ufz6 at rz.uni-karlsruhe.de>
Delivered-To: samba at lists.samba.org
Received: from mailgate.rz.uni-karlsruhe.de
(mailgate.rz.uni-karlsruhe.de [129.13.64.97]) by lists.samba.org
(Postfix) with ESMTP id 13EED4266 for <samba at lists.samba.org>; Tue, 12
Jun 2001 01:56:04 -0700 (PDT)
Received: from rz.uni-karlsruhe.de (ikmpforte.rz.uni-karlsruhe.de
[129.13.173.252]) by mailgate.rz.uni-karlsruhe.de with esmtp (Exim
3.16 #1) id 159jxe-0000Gn-00; Tue, 12 Jun 2001 10:55:42 +0200
Message-ID: <3B25DB90.B061F92E at rz.uni-karlsruhe.de>
Date: Tue, 12 Jun 2001 11:06:25 +0200
From: Amir Bukhri <ufz6 at rz.uni-karlsruhe.de>
Organization: Uni Karlsruhe
X-Mailer: Mozilla 4.73 [de] (WinNT; U)
X-Accept-Language: de
MIME-Version: 1.0
To: samba at lists.samba.org
Subject: printer - Access denied
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hallo,
we have upgrade our samba from 2.0.8 to 2.2.0, but there is some
problem.
after I have upgrade samba, printing do not work correctly.
in windows box when we try to print someting it bring that access denied
and job was viewed at printer box under linux, but the dukoment has been
printed and under linux every thing is all right - lpc , lprm , lpq work
correctly -. Not that all directories access is also right - rwx - , if
anyone has an idea, please i will be very happy.
yours
Amir
Return-Path: <psy at intekom.co.za>
Delivered-To: samba at lists.samba.org
Received: from mail.intekom.com (mid-mail-02.intekom.com [196.25.69.45])
by lists.samba.org (Postfix) with SMTP id CE5744262 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 02:36:15 -0700 (PDT)
Received: (qmail 26177 invoked from network); 12 Jun 2001 09:35:50 -0000
Received: from lys53-01-p112.kn.saix.net (HELO hq.home)
([155.239.232.112]) (envelope-sender <psy at intekom.co.za>) by
intekom.com (qmail-ldap-1.03) with SMTP for
<samba-ntdom at lists.samba.org>; 12 Jun 2001 09:35:50 -0000
X-vSMTP: intekom.com
Received: from localhost ([127.0.0.1] helo=hq.home ident=mail) by
hq.home with esmtp (Exim 3.22 #1) id 159kKb-0004Uh-00; Tue, 12 Jun
2001 11:19:25 +0200
Received: from psy.home ([10.0.0.8] helo=psy) by hq.home with smtp (Exim
3.22 #1 (Debian)) id 159kKZ-0004Ub-00; Tue, 12 Jun 2001 11:19:23 +0200
Message-ID: <000901c0f320$cc881fb0$0800000a at psy>
From: "Henning Botha" <psy at intekom.co.za>
To: <samba-ntdom at lists.samba.org>, <samba at lists.samba.org>
Subject: Here's an easier question. :)
Date: Tue, 12 Jun 2001 11:19:36 +0200
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 6.00.2462.0000
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Alright, I don't know what happened, but logging in as root from smbclient
works now, which it never did. I did reinstall Samba, but... this is
/Linux/! :)
I use " smbclient -L localhost -U root " which used to get me "Can't become
connected user."
As I said, it works now, but logging in from Win2k still doesn't. I'm hoping
this error is a bit more common than my last. I'd be a very happy man if I
could get this to work.
When I try to log in from win2k, Samba (log level 2) tells me:
[2001/06/12 11:15:12, 2] smbd/reply.c:reply_special(94)
netbios connect: name1=HQ name2=PSY
[2001/06/12 11:15:13, 2] smbd/connection.c:utmp_claim(841)
utmp_claim: lp_utmp() NULL
[2001/06/12 11:15:14, 2] rpc_parse/parse_samr.c:samr_io_userinfo_ctr(5824)
samr_io_userinfo_ctr: unknown switch level 0x1a
[2001/06/12 11:15:14, 0] rpc_server/srv_samr.c:api_samr_set_userinfo(672)
api_samr_set_userinfo: Unable to unmarshall SAMR_Q_SET_USERINFO.
[2001/06/12 11:15:14, 0] rpc_server/srv_pipe.c:api_rpcTNP(1215)
api_rpcTNP: api_samr_rpc: SAMR_SET_USERINFO failed.
[2001/06/12 11:15:14, 2] smbd/connection.c:utmp_yield(785)
utmp_yield: lp_utmp() NULL
[2001/06/12 11:15:14, 2] smbd/server.c:exit_server(440)
Closing connections
And W2K says "The procedure number is out of range."
Let me know if you need a higher log level, I'd be happy to oblige up to...
about 5. :)
Btw, I installed Samba via a precompiled Debian package. Would it make any
difference if I compiled it locally?
Please help make me the happiest man alive. :)
TiA
Henning Botha
Return-Path: <palme at uni-wuppertal.de>
Delivered-To: samba at samba.org
Received: from mail.urz.uni-wuppertal.de (mail.urz.uni-wuppertal.de
[132.195.64.1]) by lists.samba.org (Postfix) with ESMTP id 7B2A04C9C
for <samba at samba.org>; Tue, 12 Jun 2001 02:43:13 -0700 (PDT)
Received: from wrpc3.urz.uni-wuppertal.de (wrpc3.urz.uni-wuppertal.de
[132.195.20.7]) by mail.urz.uni-wuppertal.de (8.9.3/8.9.3) with ESMTP
id LAA357101910; Tue, 12 Jun 2001 11:42:50 +0200 (MDT)
Received: (from palme at localhost) by wrpc3.urz.uni-wuppertal.de
(8.9.3/8.9.3/Debian 8.9.3-21) id LAA16495; Tue, 12 Jun 2001 11:42:50
+0200
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Message-ID: <15141.58393.931308.447740 at wrpc3.urz.uni-wuppertal.de>
Date: Tue, 12 Jun 2001 11:42:49 +0200 (CEST)
From: palme at uni-wuppertal.de (Hubert Palme)
To: Gerald Carter <gcarter at valinux.com>
Cc: Hubert Palme <palme at uni-wuppertal.de>,
<debian-user at lists.debian.org>, Samba Liste <samba at samba.org>
Subject: Re: Samba: Problem mit check_log_size
In-Reply-To: <Pine.LNX.4.33.0106111102440.2659-100000 at pogo.plainjoe.org>
References: <15140.59154.438669.840794 at wrpc3.urz.uni-wuppertal.de>
<Pine.LNX.4.33.0106111102440.2659-100000 at pogo.plainjoe.org>
X-Mailer: VM 6.72 under 21.1 (patch 10) "Capitol Reef" XEmacs Lucid
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
>>>>> "G" == Gerald Carter <gcarter at valinux.com> writes:
G> On Mon, 11 Jun 2001, Hubert Palme wrote:
>> >>>>> "G" == Gerald Carter <gcarter at valinux.com> writes:
>>
>>
G> I'm not sure if the max log size parameter makes sense when using
G> --with-syslog. The parameter should probably be ignored if syslog
G> support is enabled (via ./configure and smb.conf)
>>
>> I use precompiles packages of the Debian dietribution (and I'd like to
>> avoid compiling my own :-) What parameters can I change in smb.conf?
>> --with-syslog changes a default value, I guess!?
G> Make sure 'syslog only = no' (which is the default).
This is set correctly...
G> Of course, I could be guessing wrong about the root
G> of the problem. :-)
>> (Why doesn't max log size make sense? -- the files grow
>> anyway, I think...)
G> Samba should not be rotating files out from under
G> the syslogd daemon. Not our responsisbility.
G> Make sense?
Hmm... But the only thing samba should do (as per documentation) is to
rename smb to smb.old and nmb to nmb.old for the weekly cron job (from
the samba Debian package!) to rotate them. This seems to be done by
one of the daemons (smbd, nmbd) in accordance with the "max log size"
parameter. This whole ritual seems to be done to avoid rotating open
files.
But I still have some understanding problems: If e.g. smbd/nmbd run
from inetd, they come up on request from a client. Hence, do they
never rename the logs?? What is the event triggering the deamons to
come up and rename the files?
But perhaps I totally misunderstand the whole nechanism...
Is there possibly a known bug causing smbd/nmbd to keep the files open
and thus the attempt to rename them fails?
Perhaps someone can help me to understand what could be wrong and why
the renaming fails...
Thanks a lot!
--
======================================================================
Hubert Palme Bergische Universitaet-Gesamthochschule Wuppertal
Computing Center
D-42097 Wuppertal
E-Mail: palme at uni-wuppertal.de (Germany)
http://www.hrz.uni-wuppertal.de/hrz/personen/h_palme.html
Return-Path: <Wolfgang_Kretzschmar at abas.de>
Delivered-To: samba at samba.org
Received: from gate.abas.de (mail.abas.de [212.86.210.134]) by
lists.samba.org (Postfix) with ESMTP id 5556F424E for
<samba at samba.org>; Tue, 12 Jun 2001 04:36:59 -0700 (PDT)
Received: (from root at localhost) by gate.abas.de (8.9.3/8.9.3) id
NAA25416 for samba at samba.org; Tue, 12 Jun 2001 13:36:38 +0200 (CEST)
Received: (from localhost) by gate.abas.de (MSCAN) id
2/gate.abas.de/smtp-gw/mscan; Tue Jun 12 13:36:37 2001
Message-ID: <3B25FECC.CADF6EA3 at abas.de>
Date: Tue, 12 Jun 2001 13:36:44 +0200
From: Wolfgang Kretzschmar <Wolfgang_Kretzschmar at abas.de>
Organization: ABAS Software AG
X-Mailer: Mozilla 4.75 [de] (Windows NT 5.0; U)
X-Accept-Language: de,en
MIME-Version: 1.0
To: SAMBA <samba at samba.org>
Subject: smbmount/smbpasswd: spezify path to smb.conf
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Most samba tools (smbd, smbstatus, ...) have an option -s to use an arbitrary
smb.conf file.
smbmount and smbpasswd do not. Both always use <sambadir>/lib/smb.conf.
So I have to create a symbolic link.
It would be nice to have such an option of smbmount and smbpasswd.
Wolfgang Kretzschmar
ABAS Software AG, Karlsruhe
Return-Path: <u13471 at hs-harz.de>
Delivered-To: samba at samba.org
Received: from steinadler.fh-harz.de (unknown [194.95.16.230]) by
lists.samba.org (Postfix) with ESMTP id B17044230 for
<samba at samba.org>; Tue, 12 Jun 2001 05:05:09 -0700 (PDT)
Received: from hs-harz.de ([194.95.18.16]) by steinadler.fh-harz.de
(Netscape Messaging Server 3.6) with ESMTP id AAAAE875 for
<samba at samba.org>; Tue, 12 Jun 2001 14:04:48 +0200
Message-ID: <3B26058B.E697D17B at hs-harz.de>
Date: Tue, 12 Jun 2001 14:05:31 +0200
From: "Edgar Soldin" <u13471 at hs-harz.de>
Organization: Hochschule Harz
X-Mailer: Mozilla 4.77 [en] (Win98; U)
X-Accept-Language: en
MIME-Version: 1.0
To: samba at samba.org
Subject: Re: Credential conflict?
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi JC,
Jean-Christian Imbeault wrote:
>
> When I try an access a share on one Linux machine I get in. But when I try a
> different chare on another Linux samba server I get:
>
> "\\10.x.x.x\www is not accessible. The credentials conflict with an existing
> set of credentials."
>
> Does this mean that I have to log on to any and all samba servers always as
> the same person?
>
It looks like you are already connected to the box where the problem
appears.
Read these articles...
http://support.microsoft.com/support/kb/articles/Q106/2/11.asp?LN=EN-US&SD=gn&FR=0&qry=credentials%20conflict%20with%20an%20existing&rnk=1&src=DHCS_MSPSS_gn_SRCH&SPR=NTW40
http://support.microsoft.com/support/kb/articles/Q173/1/99.ASP?LN=EN-US&SD=gn&FR=0&qry=credentials%20conflict%20with%20an%20existing&rnk=3&src=DHCS_MSPSS_gn_SRCH&SPR=NTW40
and cut all connections to the box by right clicking on Workplace. Then try
to connect again. Should work.
or use the netbios name \\name\www.
greets ED
--
public class WhoDidIt{ // A comment. I love comments
private static Person sender;
public static void main (String[] foo){
sender = new Student();
sender.setName({"Edgar", "Soldin"});
sender.setCourse("Computerscience for media and art");
Adress address=new Adress();
address.setStreet("Friedrichstr. 57-59 Wh 4.511");
address.setZip(38855);
address.setCity("Wernigerode");
adress.setCountry("Germany");
sender.setAdress(address);
sender.setMobilePhone("+49171-2782880");
sender.setWebSiteUrl(" http://www.soldin.de ");
sender.setEmail(" edgar at soldin.de ");
sender.setGender(true);
System.out.println(sender.toString());
}
}
Return-Path: <arraylai at netvigator.com>
Delivered-To: samba at lists.samba.org
Received: from imsm031.netvigator.com (imsm031.netvigator.com
[208.167.231.149]) by lists.samba.org (Postfix) with SMTP id 0B70C4230
for <samba at lists.samba.org>; Tue, 12 Jun 2001 05:08:04 -0700 (PDT)
Received: (qmail 1296 invoked from network); 12 Jun 2001 12:24:35 -0000
Received: from pcd113059.netvigator.com (HELO BruceLai) (168.70.138.59)
by imsm031.netvigator.com with SMTP; 12 Jun 2001 12:24:35 -0000
Message-ID: <005c01c0f337$f38367c0$0200a8c0 at BruceLai>
From: "Bruce" <arraylai at netvigator.com>
To: <samba at lists.samba.org>
Subject: Can't write to a share from Win98
Date: Tue, 12 Jun 2001 20:05:19 +0800
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Mailer: Microsoft Outlook Express 5.50.4522.1200
X-Converted-To-Plain-Text: from multipart/alternative by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I am new to Linux and Samba, and am trying to create a Samba server. I set
all up without problem. I can read from the shares locally or from another
win98 computer. However, I can't write to the share through Samba from win98,
but I can use the local smbclient to write to it. I have my username set to
Admin user and have the shared directory set to a permission of 777! I can't
locate the problem..... I searched through almost all documentation come with
Samba.......but get no idea... Any help is hight appreciated. Thanks!
Bruce
arraylai at netvigator.com
Return-Path: <mekilroy at risingedge.com>
Delivered-To: samba at lists.samba.org
Received: from mailhost.digitalselect.net (unknown [209.225.164.170]) by
lists.samba.org (Postfix) with ESMTP id 038D7489A; Tue, 12 Jun 2001
05:12:41 -0700 (PDT)
Received: from wizzard.rising-edge (risingedge.com [216.181.63.36]) by
mailhost.digitalselect.net (8.11.1/8.11.1) with SMTP id f5CCDpS24292;
Tue, 12 Jun 2001 08:13:51 -0400 (EDT)
Received: from diamondback (unverified [192.168.0.26]) by
wizzard.rising-edge (EMWAC SMTPRS 0.83) with SMTP id
<B0000081673 at wizzard.rising-edge>; Tue, 12 Jun 2001 08:12:04 -0400
Message-ID: <05d201c0f338$e3c3c4f0$1a00a8c0 at diamondback>
From: "M. Kilroy" <mekilroy at risingedge.com>
To: "Tim Potter" <tpot at valinux.com>
Cc: <samba-ntdom at lists.samba.org>, <samba at lists.samba.org>
References: <008f01c0f016$85097470$1a00a8c0 at diamondback>
<15140.167.516945.676074 at frungy.org>
<032401c0f279$48354870$1a00a8c0 at diamondback>
<20010611165017.B23265 at va.samba.org>
Subject: Re: Fw: LOG FILE
Date: Tue, 12 Jun 2001 08:12:03 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4133.2400
X-Antirelay: Good relay from local net2 192.168.0.0/24
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
>Hmm. I was just wondering whether it was the 2.2 version or the one from
>HEAD. 2.0.7 isn't going to work very will with winbind.
See this is what I don't understand... I downloaded HEAD, installed it with
the ./configure (with pam), make && make install, but I don't know if it
should "take over" at that point or what. Since I already had at least one
other version of samba running, I am not sure if there is some uninstall I
should do before installing a new version. Maybe I don't even have the new
ver of Samba running, which is why winbind isn't even starting?
Any thoughts?
THANKS!
~Mary
Return-Path: <Denis.Beauchemin at Courrier.USherb.ca>
Delivered-To: samba at samba.org
Received: from courrier.usherb.ca (courrier.USherb.ca [132.210.10.2]) by
lists.samba.org (Postfix) with ESMTP id D08E8425A for
<samba at samba.org>; Tue, 12 Jun 2001 05:55:53 -0700 (PDT)
Received: from dbeauchemin (dbeauchemin.si.USherb.ca [132.210.12.128])
by courrier.usherb.ca (8.9.0/8.9.0) with SMTP id IAA37790; Tue, 12 Jun
2001 08:55:19 -0400
From: "Denis Beauchemin" <Denis.Beauchemin at Courrier.USherb.ca>
To: "Michal Koivka" <krivka at carmagnus.cz>, <samba at samba.org>
Subject: RE: smbd not running
Date: Tue, 12 Jun 2001 08:55:19 -0400
Message-ID: <NEBBJDKEKLOICLKFGDJEMEGHCDAA.Denis.Beauchemin at Courrier.UShe
rb.ca>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-2"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0)
In-Reply-To: <008001c0f2fe$db70ed80$1901a8c0 at carmagnus.cz>
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Michal,
Try "fuser -v 139/tcp" to get the PID of the process that has port 139 open.
This is what I get:
[root 511 /root]# fuser -v 139/tcp
USER PID ACCESS COMMAND
139/tcp root 262 f.... smbd
root 13945 f.... smbd
This is OK for me because I have a working Samba server on that machine.
If you want to kill the process that has port 139 open add "-k" to the
"fuser" options. Of course, use with caution.
Denis
Denis Beauchemin, analyste
Service des Technologies de l'Information
Universiti de Sherbrooke
T: 819.821.8000.2252 F: 819.821.8045
> -----Message d'origine-----
> De : samba-admin at lists.samba.org
> [mailto:samba-admin at lists.samba.org]De la part de Michal Kxivka
> Envoyi : 12 juin, 2001 01:17
> A : samba at samba.org
> Objet : smbd not running
>
>
> Samba 2.2.0 on SuSE 6.4
>
> when starting smbd -D , log reports:"lib/util_sock.c: open_socket_in(853)
> bind failed on port 139 socket_addr = 0.0.0.0 Address already in use" and
> smbd is unloaded.
> ps -ax seems, that nothing interesting is running, but I am not guru ...
> What can I do with?
> Michal Kxivka
> krivka at carmagnus.cz
> www.carmagnus.cz
> 068-541 80 16
> 0602-184 980
Return-Path: <VladutaC at ca-ib.com>
Delivered-To: samba at lists.samba.org
Received: from vie-cs3.ca-ib.com (mail1.ca-ib.com [212.27.124.49]) by
lists.samba.org (Postfix) with ESMTP id 46E56422A for
<samba at lists.samba.org>; Tue, 12 Jun 2001 06:21:55 -0700 (PDT)
Received: by vie-cs3.ca-ib.com with Internet Mail Service (5.5.2653.19)
id <MWS6Q2GL>; Tue, 12 Jun 2001 15:21:34 +0200
Message-ID: <F131C3737223D111962300805F0DD08F3CF5AE at buh-cs0.ca-ib.com>
From: Vladuta Cristian <VladutaC at ca-ib.com>
To: "'Samba (E-mail)" <samba at lists.samba.org>
Subject: Samba share mapping
Date: Tue, 12 Jun 2001 15:21:29 +0200
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Dear listers,
How come the Win9x machines still resolve the IP name resolution of a Samba
share by broadcast after adding the linux box as static mapping on my DHCP
assigned Wins on the LAN ?
That probably explains the lag in mapping Samba shares on client Windows
machines at every login. How can I accelerate that? Fine-tuning on Samba?
Thanx
Cristian Vladuta
Sys Admin ,CA IB Securities, CA IB Romania
Phone +401 315 20 30
Fax +401 315 20 90
Return-Path: <alexander.skwar at delphiauto.com>
Delivered-To: samba at lists.samba.org
Received: from ahmler4.mail.eds.com (ahmler4.mail.eds.com
[192.85.154.77]) by lists.samba.org (Postfix) with ESMTP id 201A5459B
for <samba at lists.samba.org>; Tue, 12 Jun 2001 06:30:44 -0700 (PDT)
Received: from ahmlir1.mail.eds.com (ahmlir1-2.mail.eds.com
[192.85.154.25]) by ahmler4.mail.eds.com (8.11.1/8.11.1) with ESMTP id
f5CDUJC27100 for <samba at lists.samba.org>; Tue, 12 Jun 2001 09:30:23
-0400
Received: from ahmlir1.mail.eds.com (localhost [127.0.0.1]) by
ahmlir1.mail.eds.com (8.11.3/8.11.3) with ESMTP id f5CDUDh26829 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 09:30:13 -0400 (EDT)
Received: from koedgw01.delcoelect.com (koedgw01.delcoelect.com
[144.250.1.39]) by ahmlir1.mail.eds.com (8.11.3/8.11.0) with ESMTP id
f5CDUCA26805 for <samba at lists.samba.org>; Tue, 12 Jun 2001 09:30:12
-0400 (EDT)
Received: from notes.delphiauto.com (uskokg99.delcoelect.com
[144.250.3.44]) by koedgw01.delcoelect.com (8.9.3/8.9.3) with SMTP id
IAA10179 for <samba at lists.samba.org>; Tue, 12 Jun 2001 08:30:11 -0500
(EST)
From: alexander.skwar at delphiauto.com
Received: by notes.delphiauto.com(Lotus SMTP MTA v4.6.7 (934.1
12-30-1999)) id 05256A69.0049FDA8 ; Tue, 12 Jun 2001 08:28:10 -0500
X-Lotus-FromDomain: DELPHIAUTO
To: samba at lists.samba.org
Message-ID: <05256A69.0049FBB4.00 at notes.delphiauto.com>
Date: Tue, 12 Jun 2001 13:21:17 +0200
Subject: Windows 95 clients cannot connect
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Disposition: inline
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hel{lo,p}!
I've installed samba 2.2.1. Primarily we are using Windows NT 4.0 Service Pack
4 clients. These work very fine without a problem (well, as far as connecting
to shares is concerned *G*).
But we also got some Windows 95 clients here (Windows 95, Windows 95b and
Windows 95c). These clients cannot connect to the SMB servers (Samba 2.2.1 and
Windows NT 4.0 Server SP 4+). They always get the error message, that the
computer or the share cannot be found.
What can I do, so that the 95 clients can connect?
Thanks,
Alexander Skwar Department PIEA
------------------------------------------------------------------------------------------------------------------
Delphi Automotive Sytems Phone (+49)202-291-4182
Lise-Meitner-Strasse 14 Fax (+49)202-291-3037
D-42119 Wuppertal eMail: Alexander.Skwar at DelphiAuto.com
Return-Path: <HeikeNavarro at gmx.de>
Delivered-To: samba at samba.org
Received: from mail.gmx.net (pop.gmx.net [194.221.183.20]) by
lists.samba.org (Postfix) with SMTP id 0C0024447 for
<samba at samba.org>; Tue, 12 Jun 2001 06:45:55 -0700 (PDT)
Received: (qmail 4027 invoked by uid 0); 12 Jun 2001 13:45:32 -0000
Received: from acb9e8d4.ipt.aol.com (HELO navarro) (172.185.232.212) by
mail.gmx.net (mp005-rz3) with SMTP; 12 Jun 2001 13:45:32 -0000
Message-ID: <000d01c0f346$35a770c0$827832d9 at navarro>
From: "Heike Navarro" <HeikeNavarro at gmx.de>
To: <samba at samba.org>
Subject: Samba 2.07 for HPUX
Date: Tue, 12 Jun 2001 15:47:22 +0200
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Mailer: Microsoft Outlook Express 5.00.2615.200
X-Converted-To-Plain-Text: from multipart/alternative by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
I need a samba version 2.07 precompiled fpr HPUX 10.20.
Where can I find it?
H.Navarro
Return-Path: <abartlet at pcug.org.au>
Delivered-To: samba at lists.samba.org
Received: from dnscache.cbr.au.asiaonline.net
(dnscache.cbr.au.asiaonline.net [210.215.8.100]) by lists.samba.org
(Postfix) with ESMTP id 77B6547A0 for <samba at lists.samba.org>; Tue, 12
Jun 2001 06:51:14 -0700 (PDT)
Received: from piglett.bartlett.house (as2-130.cbr.au.asiaonline.net
[210.215.10.130]) by dnscache.cbr.au.asiaonline.net (8.10.2/8.10.2)
with ESMTP id f5CDogq07031; Tue, 12 Jun 2001 23:50:44 +1000 (EST)
Received: from yowiee.bartlett.house (IDENT:root at yowiee.bartlett.house
[192.168.1.99]) by piglett.bartlett.house (8.9.3/8.8.7) with ESMTP id
XAA09702; Tue, 12 Jun 2001 23:50:19 +1000
Received: from bartlett.house (nessie-rh.local.bartlett.house
[192.168.1.136]) by yowiee.bartlett.house (8.9.3/8.8.7) with ESMTP id
XAA08491; Tue, 12 Jun 2001 23:50:19 +1000
Message-ID: <3B261E3C.9F85CCAE at bartlett.house>
Date: Tue, 12 Jun 2001 23:50:52 +1000
From: Andrew Bartlett <abartlet at pcug.org.au>
X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.4.2-2 i586)
X-Accept-Language: en
MIME-Version: 1.0
To: Vladuta Cristian <VladutaC at ca-ib.com>
Cc: "'Samba (E-mail)" <samba at lists.samba.org>
Subject: Re: Samba share mapping
References: <F131C3737223D111962300805F0DD08F3CF5AE at buh-cs0.ca-ib.com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Vladuta Cristian wrote:
>
> Dear listers,
>
> How come the Win9x machines still resolve the IP name resolution of a Samba
> share by broadcast after adding the linux box as static mapping on my DHCP
> assigned Wins on the LAN ?
>
> That probably explains the lag in mapping Samba shares on client Windows
> machines at every login. How can I accelerate that? Fine-tuning on Samba?
Run a WINS server. The static IP doesn't matter to win9X, as there is
still nothing to tell it where the server is. (DNS does not count, even
when MS uses dns, its after broadcast).
Setup the wins server, point the client and server at it. Setting it in
your dhcpd.conf is a good idea, depending on your setup.
Andrew Bartlett
--
Andrew Bartlett
abartlet at pcug.org.au
Return-Path: <gaa at ulticom.com>
Delivered-To: samba at lists.samba.org
Received: from chuckie.dgms.com (chuckie.dgms.com [38.150.156.4]) by
lists.samba.org (Postfix) with ESMTP id 9A3F549C4 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 07:12:00 -0700 (PDT)
Received: from ulticom.com (garnet.dgms.com [172.25.1.153]) by
chuckie.dgms.com (8.9.3/8.9.3) with ESMTP id KAA13728 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 10:11:39 -0400 (EDT)
Message-ID: <3B26231B.B34D1172 at ulticom.com>
Date: Tue, 12 Jun 2001 10:11:39 -0400
From: Gary Algier <gaa at ulticom.com>
X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.2.12 i386)
X-Accept-Language: en
MIME-Version: 1.0
To: Samba <samba at lists.samba.org>
Subject: undefined: slprintf
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I fetched the latest samba from CVS. Building these on both Solaris 2.6
(gcc) and FreeBSD 4.2 I got an undefined reference to slprintf. I then
saw someone mention a "make proto". I did this on both, the problem went
away on FreeBSD, but not Solaris. Are there any more magic incantations
I need to perform?
Is there a FAQ or other definitive list of actions to be performed after
getting new sources from CVS?
--
Gary Algier, WB2FWZ gary.algier at ulticom.com +1 856 787 2758
Ulticom Inc., 1020 Briggs Rd, Mt. Laurel, NJ 08054 Fax:+1 856 866 2033
A self-addressed envelope would be addressed "envelope."
Return-Path: <don_mccall at hp.com>
Delivered-To: samba at samba.org
Received: from atlrel2.hp.com (atlrel2.hp.com [156.153.255.202]) by
lists.samba.org (Postfix) with ESMTP id D957E453F for
<samba at samba.org>; Tue, 12 Jun 2001 07:15:59 -0700 (PDT)
Received: from xatlrelay2.atl.hp.com (xatlrelay2.atl.hp.com
[15.45.89.191]) by atlrel2.hp.com (Postfix) with ESMTP id 5DD4A14F5
for <samba at samba.org>; Tue, 12 Jun 2001 10:15:39 -0400 (EDT)
Received: from xatlbh1.atl.hp.com (xatlbh1.atl.hp.com [15.45.89.186]) by
xatlrelay2.atl.hp.com (Postfix) with ESMTP id 30F301F50A for
<samba at samba.org>; Tue, 12 Jun 2001 10:13:58 -0400 (EDT)
Received: by xatlbh1.atl.hp.com with Internet Mail Service (5.5.2653.19)
id <MKRWRFHB>; Tue, 12 Jun 2001 10:15:38 -0400
Message-ID: <079FD72E42C9D311B854009027650E6F04050AB8 at xatl02.atl.hp.com>
From: "MCCALL,DON (HP-USA,ex1)" <don_mccall at hp.com>
To: "'samba at samba.org'" <samba at samba.org>
Subject: Binary packages for 2.0.9 and 2.2.0 on 10.20 and 11.0 HP-UX
Date: Tue, 12 Jun 2001 10:15:35 -0400
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi folks;
I've been working with the HP-UX lab on getting us
involved in submitting binary packages for the latest
Samba (2.0.9, and 2.2.0) for HP-UX systems. What's the
proceedure to submit these once they are ready?
Thanks,
Don
HP WTEC Senior Support Engineer
Return-Path: <info at ag-it.de>
Delivered-To: samba at lists.samba.org
Received: from ns.ag-it.net (ns.ag-it.net [66.33.48.101]) by
lists.samba.org (Postfix) with SMTP id D60EF4C34 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 07:37:50 -0700 (PDT)
Received: (qmail 19901 invoked from network); 12 Jun 2001 14:37:13 -0000
Received: from misgate.mis.de (HELO pcagologan) (62.154.166.2) by
ns.ag-it.net with SMTP; 12 Jun 2001 14:37:13 -0000
From: "Andrei Gologan" <info at ag-it.de>
To: <samba at lists.samba.org>
Subject: Winbind + suse
Date: Tue, 12 Jun 2001 16:37:24 +0200
Message-ID: <004b01c0f34d$33473570$1f02010a at pcagologan>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook, Build 10.0.2627
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
Well I tried to compile from source ond a suse 7.2 and it didn4t work.
So I installed the suse packages, and read everything samba is working
so far, winbind I don4t find. A part of it is installed:
/lib/security/pam_winbind.so
/usr/lib/samba/swat/help/winbind.html
/usr/lib/samba/swat/help/winbindd.8.html
/usr/share/doc/packages/samba/docbook/manpages/winbindd.8.sgml
/usr/share/doc/packages/samba/docbook/projdoc/winbind.sgml
/usr/share/doc/packages/samba/htmldocs/winbind.html
/usr/share/doc/packages/samba/htmldocs/winbindd.8.html
/usr/share/doc/packages/samba/manpages/winbindd.8
/usr/share/man/man8/winbindd.8.gz
/var/cache/man/cat8/winbindd.8.gz
But no server !
Is it allready available from Suse ?
Is there a way to configure only winbind from source no samba, since it
works allready ?
Did anybody succeded installing winbind on a suse 7.1 or 7.2 ? How `?
Thank you very much !
Andrei Gologan
Return-Path: <Arnold.O.Andrews at seagate.com>
Delivered-To: samba at lists.samba.org
Received: from gwextclu.seagate.com (gwextclu.seagate.com
[204.160.183.18]) by lists.samba.org (Postfix) with SMTP id C01C54C9B
for <samba at lists.samba.org>; Tue, 12 Jun 2001 07:57:43 -0700 (PDT)
Received: from 172.18.17.4 by gwextclu.seagate.com with ESMTP ( (MMS
v4.7)); Tue, 12 Jun 2001 07:57:20 -0700
X-Server-Uuid: 1569d162-b3be-4edd-8d78-ab9187b54f11
Received: from auth0.it.stsj.seagate.com (auth0.it.stsj.seagate.com
[192.168.109.16]) by seastamp.seagate.com (8.11.2/8.11.2) with ESMTP
id f5CEv4x11855; Tue, 12 Jun 2001 14:57:04 GMT
Received: from sv-gw1.notes.seagate.com (sv-gw1.stsv.seagate.com
[134.204.14.95]) by auth0.it.stsj.seagate.com with ESMTP id OAA22165;
Tue, 12 Jun 2001 14:57:04 GMT
Subject: Re: samba-vos - problem with authentication with WinNT
To: attef1 at hq.psa.com.sg
Cc: samba at lists.samba.org
X-Mailer: Lotus Notes Release 5.0.4 June 8, 2000
Message-ID: <OF780C8FCE.2BD28519-ON86256A69.0050C38F at notes.seagate.com>
From: Arnold.O.Andrews at seagate.com
Date: Tue, 12 Jun 2001 09:56:30 -0500
X-MIMETrack: Serialize by Router on SV-GW1/Seagate Internet(Release
5.0.6a |January 17, 2001) at 06/12/2001 07:57:04 AM
MIME-Version: 1.0
X-WSS-ID: 1738F25A2109162-01-01
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
You need to set "security = domain", and uncomment "password encryption =
yes". Make sure that your "workgroup" param is set to your domain name.
You probably also need to add the samba server as a Windows NT workstation
or server (not as a BDC) to your NT domain as well. See the documentation
in the Samba HOWTO Collection, available from the home page on the SWAT.
Good luck,
Arnold Andrews
PS: ( I'm making the assumption that you are also using version 2.2.0 for
the documentation about how to join the domain.)
"ERIC FERNANDEZ, ITID" <attef1 at hq.psa.com.sg>@lists.samba.org on 06/11/2001
11:06:14 PM
Sent by: samba-admin at lists.samba.org
To: "'samba at lists.samba.org'" <samba at lists.samba.org>
cc:
Subject: samba-vos - problem with authentication with WinNT
Hi there,
I have installed samba-vos (on a Stratus Continuum machine - using vos
operating system)
Currently I'm able to browse my vos machine thanks to samba from a WIN 98
pc. I'm trying to fine tune the security on samba-vos.
Currently security = share based on host allow = subnets.
My Problem:
Whenever I put security = server and password server = w.x.y.z, I get my
WIN
98 asking for authentication for my network password, which is fine and
good.
ex.
You must provide a password to make this connection
Resource \\PSA_T3\IPC$
password:
The password supplied is always rejected.
I want my WinNT PDC to authenticate the password, I believe the samba would
fetch the user-id and password and send it to the PDC for authentication,
whereby upon confirmation I would be able to view my resources on my
Stratus
machine.. but it doesn't seem to work..not sure why is that..
my smb.conf is as follows ( important lines only)
security = server
password server = w.x.y.z
include = >siemens>samba>lib>smb.conf.%m
; wins server = w.x.y.z
dns proxy = no
hosts allow = w.x.y. 127.
; encrypt passwords = yes
; user = dafef1
I read the doc on - "making password as clear text, WinNT & 95,
security_level, etc" but still not successful. I know it works on linux
because I have a colleague who has done it..
Any help would be grateful..
thx
This communication contains confidential or privileged information. If you
are not the intended recipient, please notify us IMMEDIATELY that you have
received it and destroy it. We are not liable for any unauthorised
sending
of or interference with this communication.
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <ink at inconnu.isu.edu>
Delivered-To: samba at samba.org
Received: from inconnu.isu.edu (inconnu.isu.edu [134.50.8.55]) by
lists.samba.org (Postfix) with ESMTP id E07DB4B65 for
<samba at samba.org>; Tue, 12 Jun 2001 08:26:05 -0700 (PDT)
Received: from localhost (ink at localhost) by inconnu.isu.edu
(8.9.3/8.9.3) with ESMTP id JAA28187; Tue, 12 Jun 2001 09:22:57 -0600
Date: Tue, 12 Jun 2001 09:22:57 -0600 (MDT)
From: Craig Kelley <ink at inconnu.isu.edu>
To: Saad Moten <moten at soneri.com>
Cc: <samba at samba.org>
Subject: Re: Browsing workgroups on remote subnets
In-Reply-To: <011701c0f316$80c13670$2e020a0a at ciscoworks>
Message-ID: <Pine.LNX.4.32.0106120922060.24733-100000 at inconnu.isu.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Tue, 12 Jun 2001, Saad Moten wrote:
> I read your article on net, I have facing similar problem, do you got
> the solution of Browsing Workgroups, if you got the solution please
> guide me.
Just be sure you have WINS setup on the clients to point to the same WINS
server that the Samba machine is using (which could be the very same box,
if you would like Samba to serve as the WINS server).
--
It won't be long before the CPU is a card in a slot on your ATX videoboard
Craig Kelley -- kellcrai at isu.edu
http://www.isu.edu/~kellcrai finger ink at inconnu.isu.edu for PGP block
Return-Path: <ink at inconnu.isu.edu>
Delivered-To: samba at samba.org
Received: from inconnu.isu.edu (inconnu.isu.edu [134.50.8.55]) by
lists.samba.org (Postfix) with ESMTP id 2FB2243F8 for
<samba at samba.org>; Tue, 12 Jun 2001 08:27:02 -0700 (PDT)
Received: from localhost (ink at localhost) by inconnu.isu.edu
(8.9.3/8.9.3) with ESMTP id JAA28430; Tue, 12 Jun 2001 09:26:39 -0600
Date: Tue, 12 Jun 2001 09:26:39 -0600 (MDT)
From: Craig Kelley <ink at inconnu.isu.edu>
To: Jean-Christian Imbeault <jean_christian at hotmail.com>
Cc: <samba at samba.org>
Subject: Re: Users and groups under Samba?
In-Reply-To: <F57tyi67EKRuYDlrjbu00007480 at hotmail.com>
Message-ID: <Pine.LNX.4.32.0106120924160.24733-100000 at inconnu.isu.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Tue, 12 Jun 2001, Jean-Christian Imbeault wrote:
> I know this is a simple question but I have been racking my brains over it
> for a week now and still I can't get the concept of samba users and groups
> vs unix users and groups straight.
>
> Here's my conf file:
> [top40]
> comment = HMV TOP40 INTL & JPOP
> path = /home/httpd/html/top40
> valid users = @top40
> writable = yes
> printable = no
>
> I want to the folder to be accessible by anyone in the top40 group. I made
> the unix directory and all the files be owned by the group top40 and owned
> by a specific user in that group.
>
> I have created a user, jc.imbeault, and put him in the Unix top40 group.
> (But he does not own the files in the top40 share, another top40 user does).
>
> [root at top40 conf]# cat /etc/group | grep jc
> jc.imbeault:x:506:
> top40:x:508:nobody,jc.imbeault
>
> and I have run smbpasswd -a jc.imbeault to add the user and give him a
> password (same as the unix one).
>
> When I try to access the share I get a request for a username and password,
> I enter them and I can browse the share.
>
> But I cannot create any new files or delete any files. I get an access
> denied message.
>
> I thought that since the user is in the proper group he should be able to do
> anything with that share ...
>
> What concept did I not quite grasp?
Can jc.imbeault write files to those directories directly:
su - jc.imbeault
cd /home/httpd/html/top40
cat > test
[is there an error here?]
If so, then you need to give the group write permissions to those files,
and you probably want to change the create mode (man smb.conf; read up on
'force create mode')
--
It won't be long before the CPU is a card in a slot on your ATX videoboard
Craig Kelley -- kellcrai at isu.edu
http://www.isu.edu/~kellcrai finger ink at inconnu.isu.edu for PGP block
Return-Path: <ink at inconnu.isu.edu>
Delivered-To: samba at samba.org
Received: from inconnu.isu.edu (inconnu.isu.edu [134.50.8.55]) by
lists.samba.org (Postfix) with ESMTP id 602134BC7 for
<samba at samba.org>; Tue, 12 Jun 2001 08:29:21 -0700 (PDT)
Received: from localhost (ink at localhost) by inconnu.isu.edu
(8.9.3/8.9.3) with ESMTP id JAA28506; Tue, 12 Jun 2001 09:28:55 -0600
Date: Tue, 12 Jun 2001 09:28:55 -0600 (MDT)
From: Craig Kelley <ink at inconnu.isu.edu>
To: Jean-Christian Imbeault <jean_christian at hotmail.com>
Cc: <samba at samba.org>
Subject: Re: Credential conflict?
In-Reply-To: <F115WDKpzxDPHprp5yL000085f2 at hotmail.com>
Message-ID: <Pine.LNX.4.32.0106120927460.24733-100000 at inconnu.isu.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Tue, 12 Jun 2001, Jean-Christian Imbeault wrote:
> When I try an access a share on one Linux machine I get in. But when I try a
> different chare on another Linux samba server I get:
>
> "\\10.x.x.x\www is not accessible. The credentials conflict with an existing
> set of credentials."
>
> Does this mean that I have to log on to any and all samba servers always as
> the same person?
No, it means that Windows won't let you login with different sets of
credentials (braindead, I know). You can right-click on the Network
Neighborhood and select 'disconnect' to see a list of connections you
already have open.
--
It won't be long before the CPU is a card in a slot on your ATX videoboard
Craig Kelley -- kellcrai at isu.edu
http://www.isu.edu/~kellcrai finger ink at inconnu.isu.edu for PGP block
Return-Path: <ink at inconnu.isu.edu>
Delivered-To: samba at lists.samba.org
Received: from inconnu.isu.edu (inconnu.isu.edu [134.50.8.55]) by
lists.samba.org (Postfix) with ESMTP id 3CA914C74 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 08:32:37 -0700 (PDT)
Received: from localhost (ink at localhost) by inconnu.isu.edu
(8.9.3/8.9.3) with ESMTP id JAA28745; Tue, 12 Jun 2001 09:32:13 -0600
Date: Tue, 12 Jun 2001 09:32:13 -0600 (MDT)
From: Craig Kelley <ink at inconnu.isu.edu>
To: Vladuta Cristian <VladutaC at ca-ib.com>
Cc: "'Samba (E-mail)" <samba at lists.samba.org>
Subject: Re: Mapping samba shares takes too long !?
In-Reply-To: <F131C3737223D111962300805F0DD08F3CF56C at buh-cs0.ca-ib.com>
Message-ID: <Pine.LNX.4.32.0106120929470.24733-100000 at inconnu.isu.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Tue, 12 Jun 2001, Vladuta Cristian wrote:
> Hi Guys,
>
>
> I just turned a Compaq Proliant (Raid5 8 GB logical drive) NT 4.0 Member
> Server into a Linux 7 Samba 2.0.7 release Server while maintaining the file
> server role. The Clients are W9X, NT, W2K. Security level on the Linux box
> is share based ( public access ).
>
> To my surprise , the Linux-Samba solution has a slower response on file
> access. But what is more frustrating comes from the NET USE scripts on
> client machines that now take 1-2 minutes to run for mapping a linux share!
>
> I must say I am a bit disappointed. Is there something I miss regarding the
> netbios name resoution ? Why is taking that long to map the samba names ?
> Any experience on fine-tuning that?
Be sure the samba server and the windows clients are all using the same
WINS server (be it an NT or Samba machine). It sounds like you're going
through the fun "automatic" name resolution in Windows -- it's even worse
if you have IPX and/or NetBIOS installed. A common WINS server and/or
propper DNS name registration (which only works for newer versions of
Windows) is the solution. If, by chance, you're using Client32 from
Novell, then this is completely normal MO ;)
--
It won't be long before the CPU is a card in a slot on your ATX videoboard
Craig Kelley -- kellcrai at isu.edu
http://www.isu.edu/~kellcrai finger ink at inconnu.isu.edu for PGP block
Return-Path: <rcgraves at brandeis.edu>
Delivered-To: samba at lists.samba.org
Received: from cliff.unet.brandeis.edu (cliff.unet.brandeis.edu
[129.64.99.34]) by lists.samba.org (Postfix) with ESMTP id 979D44CB9
for <samba at lists.samba.org>; Tue, 12 Jun 2001 08:36:08 -0700 (PDT)
Received: from quixote.unet.brandeis.edu
(IDENT:0 at quixote.unet.brandeis.edu [129.64.99.99]) by
cliff.unet.brandeis.edu (8.9.3/8.9.3/UNet2.1) with ESMTP id LAA30224
for <samba at lists.samba.org>; Tue, 12 Jun 2001 11:35:47 -0400
Received: from localhost (rcgraves at localhost) by
quixote.unet.brandeis.edu (8.9.3/8.9.1) with ESMTP id LAA29566 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 11:35:46 -0400
Date: Tue, 12 Jun 2001 11:35:46 -0400 (EDT)
From: Rich Graves <rcgraves at brandeis.edu>
X-X-Sender: <rcgraves at quixote.unet.brandeis.edu>
To: <samba at lists.samba.org>
Subject: Re: Stuffing smbpasswd into an NT PDC?
In-Reply-To: <OF3A5D18B7.BC32491A-ON86256A68.0057430A at notes.seagate.com>
Message-ID: <Pine.LNX.4.33.0106121125190.29267-100000 at quixote.unet.brand
eis.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Mon, 11 Jun 2001 Arnold.O.Andrews at seagate.com wrote:
> What I would do, if you must use the NT PDC, is to convert you samba PDC to
> a member of the NT domain, then use domain authentication. That way, you
> won't need to continue the ongoing password replication. You'll have to
> create all your current samba accounts into the NT domain once, then that's
Yes. But to restate the main point of my question, has anyone else done the
work of stuffing encrypted passwords from /etc/smbpasswd into an NT PDC
before? I don't want to reassign or crack passwords. In theory, I don't
need to, because I have the hashes and know where they need to go in the
SAM.
It's been four years since that tantalizing paragraph was put in the pwdump
readme. Has no one followed through with it?
--
Rich Graves <rcgraves at brandeis.edu>
UNet Systems Administrator
Return-Path: <barth at cck.uni-kl.de>
Delivered-To: samba at samba.org
Received: from mail.uni-kl.de (mail.uni-kl.de [131.246.137.52]) by
lists.samba.org (Postfix) with ESMTP id 6A6844CD0 for
<samba at samba.org>; Tue, 12 Jun 2001 08:38:17 -0700 (PDT)
Received: from enterprise.cck.uni-kl.de (enterprise.cck.uni-kl.de
[131.246.239.10]) by mail.uni-kl.de (8.11.0/8.11.0) with ESMTP id
f5CFbpo29780; Tue, 12 Jun 2001 17:37:51 +0200 (MET DST)
Received: from fbk.mv.uni-kl.de (fbk.mv.uni-kl.de [131.246.201.62]) by
enterprise.cck.uni-kl.de (8.9.2/8.9.2) with ESMTP id RAA24395; Tue, 12
Jun 2001 17:37:51 +0200 (MET DST)
Received: from fbk42-7 (fbk42-7.mv.uni-kl.de [131.246.201.77]) by
fbk.mv.uni-kl.de (8.9.1/8.9.1) with ESMTP id RAA09281; Tue, 12 Jun
2001 17:37:56 +0200
From: "Christian Barth" <barth at cck.uni-kl.de>
To: samba at samba.org, "Jean-Christian Imbeault"
<jean_christian at hotmail.com>
Date: Tue, 12 Jun 2001 17:37:44 +0200
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
Subject: Re: Users and groups under Samba?
Message-ID: <3B265368.24972.22D08FC at localhost>
Priority: normal
In-reply-to: <F57tyi67EKRuYDlrjbu00007480 at hotmail.com>
X-mailer: Pegasus Mail for Win32 (v3.12c)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
> I know this is a simple question but I have been racking my brains over it
> for a week now and still I can't get the concept of samba users and groups
> vs unix users and groups straight.
>
> Here's my conf file:
> [top40]
> comment = HMV TOP40 INTL & JPOP
> path = /home/httpd/html/top40
> valid users = @top40
> writable = yes
> printable = no
>
> I want to the folder to be accessible by anyone in the top40 group. I made
> the unix directory and all the files be owned by the group top40 and owned
> by a specific user in that group.
>
> I have created a user, jc.imbeault, and put him in the Unix top40 group.
> (But he does not own the files in the top40 share, another top40 user does).
>
> [root at top40 conf]# cat /etc/group | grep jc
> jc.imbeault:x:506:
> top40:x:508:nobody,jc.imbeault
Does the unix you are using support user names with dot and longer
then 8 characters? Can jc.imbeault login with telnet, ssh, rlogin,
ftp, ... ?
You may want to look at the user.map parameter
>
> and I have run smbpasswd -a jc.imbeault to add the user and give him a
> password (same as the unix one).
>
> When I try to access the share I get a request for a username and password,
> I enter them and I can browse the share.
>
> But I cannot create any new files or delete any files. I get an access
> denied message.
>
> I thought that since the user is in the proper group he should be able to do
> anything with that share ...
>
> What concept did I not quite grasp?
>
> Jc
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
>
_______________________________________________________________________
In a world without walls and fences, who needs windows and gates? (SUN)
Return-Path: <naughton at domino.danielwoodhead.com>
Delivered-To: samba at samba.org
Received: from S104TKKM.DANIELWOODHEAD.COM (unknown [207.208.161.4]) by
lists.samba.org (Postfix) with ESMTP id E3F234D73 for
<samba at samba.org>; Tue, 12 Jun 2001 08:41:35 -0700 (PDT)
Subject: 2.2.0 binaries for redhat 7.1
To: samba at samba.org
X-Mailer: Lotus Notes Release 5.0.2c February 2, 2000
Message-ID: <OF403CA93D.9198F49E-ON86256A69.0055CF40 at DANIELWOODHEAD.COM>
From: naughton at domino.danielwoodhead.com
Date: Tue, 12 Jun 2001 10:40:54 -0500
X-MIMETrack: Serialize by Router on server2/dwco(Release 5.0.2c
|February 2, 2000) at 06/12/2001 10:40:56 AM
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Does anyone know a location for 2.2.0 binaries (rpms) for redhat 7.1. I've
checked the usual places: rpmfind.net has some rawhide versions without the
platform specified with some readline depency problems, samba.org has some
for 7.0 - nothing for 7.1. Any pointers would be appreciated. Thanks
Dan Naughton
Return-Path: <gcarter at valinux.com>
Delivered-To: samba at lists.samba.org
Received: from Eng.Auburn.EDU (dns.eng.auburn.edu [131.204.10.13]) by
lists.samba.org (Postfix) with ESMTP id ABA6D422A for
<samba at lists.samba.org>; Tue, 12 Jun 2001 08:42:52 -0700 (PDT)
Received: from localhost (root at ettin.eng.auburn.edu [131.204.12.72]) by
Eng.Auburn.EDU (8.9.3/8.9.3) with ESMTP id KAA15819; Tue, 12 Jun 2001
10:42:18 -0500 (CDT)
Date: Tue, 12 Jun 2001 10:45:21 -0500 (CDT)
From: Gerald Carter <gcarter at valinux.com>
X-X-Sender: <gcarter at pogo.plainjoe.org>
To: Henning Botha <psy at intekom.co.za>
Cc: <samba at lists.samba.org>
Subject: Re: Here's an easier question. :)
In-Reply-To: <000901c0f320$cc881fb0$0800000a at psy>
Message-ID: <Pine.LNX.4.33.0106121044230.6157-100000 at pogo.plainjoe.org>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Tue, 12 Jun 2001, Henning Botha wrote:
> When I try to log in from win2k, Samba (log level 2) tells me:
>
> [2001/06/12 11:15:12, 2] smbd/reply.c:reply_special(94)
> netbios connect: name1=HQ name2=PSY
> [2001/06/12 11:15:13, 2] smbd/connection.c:utmp_claim(841)
> utmp_claim: lp_utmp() NULL
> [2001/06/12 11:15:14, 2] rpc_parse/parse_samr.c:samr_io_userinfo_ctr(5824)
> samr_io_userinfo_ctr: unknown switch level 0x1a
^^^^^^^^^^^^^^^^^^^^^^^^^
You are using Service Pack 2 with Samba 2.2.0 You need the latest
SAMBA_2_2 cvs code or this to work.
Cheers, jerry
----------------------------------------------------------------------
/\ Gerald (Jerry) Carter Professional Services
\/ http://www.valinux.com/ VA Linux Systems gcarter at valinux.com
http://www.samba.org/ SAMBA Team jerry at samba.org
http://www.plainjoe.org/ jerry at plainjoe.org
"...a hundred billion castaways looking for a home."
- Sting "Message in a Bottle" ( 1979 )
Return-Path: <kyle at comanche.rawah.co.larimer.co.us>
Delivered-To: samba at lists.samba.org
Received: from rawah.co.larimer.co.us (unknown [204.133.54.49]) by
lists.samba.org (Postfix) with ESMTP id F0A5E4D73 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 08:42:21 -0700 (PDT)
Received: from comanche.rawah.co.larimer.co.us (comanche
[205.169.12.67]) by rawah.co.larimer.co.us (8.9.1b+Sun/8.9.1) with
ESMTP id JAA18918 for <samba at lists.samba.org>; Tue, 12 Jun 2001
09:41:56 -0600 (MDT)
Received: from comanche (comanche [205.169.12.67]) by
comanche.rawah.co.larimer.co.us (8.8.8+Sun/8.8.8) with SMTP id
JAA13137 for <samba at lists.samba.org>; Tue, 12 Jun 2001 09:41:57 -0600
(MDT)
Message-Id: <200106121541.JAA13137 at comanche.rawah.co.larimer.co.us>
Date: Tue, 12 Jun 2001 09:41:57 -0600 (MDT)
From: Kyle Freestone <kyle at rawah.co.larimer.co.us>
Reply-To: Kyle Freestone <kyle at rawah.co.larimer.co.us>
Subject: DNS and Samba share mapping
To: samba at lists.samba.org
MIME-Version: 1.0
Content-Type: TEXT/plain; charset=us-ascii
Content-MD5: HK2k4Qo9EVNgI1BJt5HD0Q==
X-Mailer: dtmail 1.2.1 CDE Version 1.2.1 SunOS 5.6 sun4u sparc
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Does any version of Samba support DNS name resolution instead of WINS. The
reason I'm wondering is, our Network people are wanting to eliminate all of our
WINS servers, and go strictly to DNS. I have been running a Solaris7 server w/
Samba 2.0.0 using the existing NT WINS servers for quite a while with only a few
problems.
I think I have DNS resolution working on a test machine ... I think. I'm just
concerned that I'm going to have a bunch of end-users go belly-up when they
powerdown the WINS servers.
Any comments or suggestions???
Kyle Freestone
kyle at rawah.co.larimer.co.us
Return-Path: <ink at inconnu.isu.edu>
Delivered-To: samba at lists.samba.org
Received: from inconnu.isu.edu (inconnu.isu.edu [134.50.8.55]) by
lists.samba.org (Postfix) with ESMTP id 6C3474D82 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 08:44:41 -0700 (PDT)
Received: from localhost (ink at localhost) by inconnu.isu.edu
(8.9.3/8.9.3) with ESMTP id JAA29392; Tue, 12 Jun 2001 09:44:17 -0600
Date: Tue, 12 Jun 2001 09:44:17 -0600 (MDT)
From: Craig Kelley <ink at inconnu.isu.edu>
To: Vladuta Cristian <VladutaC at ca-ib.com>
Cc: "'Samba (E-mail)" <samba at lists.samba.org>
Subject: Re: Samba share mapping
In-Reply-To: <F131C3737223D111962300805F0DD08F3CF5AE at buh-cs0.ca-ib.com>
Message-ID: <Pine.LNX.4.32.0106120942290.24733-100000 at inconnu.isu.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Tue, 12 Jun 2001, Vladuta Cristian wrote:
> Dear listers,
>
> How come the Win9x machines still resolve the IP name resolution of a Samba
> share by broadcast after adding the linux box as static mapping on my DHCP
> assigned Wins on the LAN ?
>
> That probably explains the lag in mapping Samba shares on client Windows
> machines at every login. How can I accelerate that? Fine-tuning on Samba?
Be sure you setup the netbios-name-servers in your dhcp server (assuming
you're running ISC UNIX dhcpd) to point out the address of your WINS
servers to the dhcp clients.
--
It won't be long before the CPU is a card in a slot on your ATX videoboard
Craig Kelley -- kellcrai at isu.edu
http://www.isu.edu/~kellcrai finger ink at inconnu.isu.edu for PGP block
Return-Path: <ink at inconnu.isu.edu>
Delivered-To: samba at lists.samba.org
Received: from inconnu.isu.edu (inconnu.isu.edu [134.50.8.55]) by
lists.samba.org (Postfix) with ESMTP id 8EA324D5E for
<samba at lists.samba.org>; Tue, 12 Jun 2001 08:46:19 -0700 (PDT)
Received: from localhost (ink at localhost) by inconnu.isu.edu
(8.9.3/8.9.3) with ESMTP id JAA29598; Tue, 12 Jun 2001 09:45:57 -0600
Date: Tue, 12 Jun 2001 09:45:57 -0600 (MDT)
From: Craig Kelley <ink at inconnu.isu.edu>
To: <alexander.skwar at delphiauto.com>
Cc: <samba at lists.samba.org>
Subject: Re: Windows 95 clients cannot connect
In-Reply-To: <05256A69.0049FBB4.00 at notes.delphiauto.com>
Message-ID: <Pine.LNX.4.32.0106120945390.24733-100000 at inconnu.isu.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Tue, 12 Jun 2001 alexander.skwar at delphiauto.com wrote:
> Hel{lo,p}!
>
> I've installed samba 2.2.1. Primarily we are using Windows NT 4.0 Service Pack
> 4 clients. These work very fine without a problem (well, as far as connecting
> to shares is concerned *G*).
>
> But we also got some Windows 95 clients here (Windows 95, Windows 95b and
> Windows 95c). These clients cannot connect to the SMB servers (Samba 2.2.1 and
> Windows NT 4.0 Server SP 4+). They always get the error message, that the
> computer or the share cannot be found.
>
> What can I do, so that the 95 clients can connect?
Setup WINS in the TCP/IP control panel.
--
It won't be long before the CPU is a card in a slot on your ATX videoboard
Craig Kelley -- kellcrai at isu.edu
http://www.isu.edu/~kellcrai finger ink at inconnu.isu.edu for PGP block
Return-Path: <nailed at videotron.ca>
Delivered-To: samba at samba.org
Received: from VL-MS-MR003.sc1.videotron.ca (relais.videotron.ca
[24.201.245.36]) by lists.samba.org (Postfix) with ESMTP id 9B3354D6B
for <samba at samba.org>; Tue, 12 Jun 2001 08:54:39 -0700 (PDT)
Received: from alain ([24.201.55.103]) by VL-MS-MR003.sc1.videotron.ca
(Netscape Messaging Server 4.15) with SMTP id GETQUI00.VZ2; Tue, 12
Jun 2001 11:54:18 -0400
Content-Type: text/plain; charset="iso-8859-2"
From: Alain Toussaint <nailed at videotron.ca>
To: Michal =?iso-8859-2?q?K=F8ivka?= <krivka at carmagnus.cz>,
<samba at samba.org>
Subject: Re: smbd not running
Date: Tue, 12 Jun 2001 11:54:18 -0400
X-Mailer: KMail [version 1.2]
References: <008001c0f2fe$db70ed80$1901a8c0 at carmagnus.cz>
In-Reply-To: <008001c0f2fe$db70ed80$1901a8c0 at carmagnus.cz>
MIME-Version: 1.0
Message-Id: <01061211541800.00663 at alain>
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
> when starting smbd -D , log reports:"lib/util_sock.c:
> open_socket_in(853) bind failed on port 139 socket_addr = 0.0.0.0
> Address already in use" and smbd is unloaded.
check if there's Samba stuff in your inetd.conf/xinetd.conf,remove it
and then restart inetd,then you can start Samba standalone.
Alain
Return-Path: <alex at palmira.dntis.ro>
Delivered-To: samba at samba.org
Received: from palmira.dntis.ro (palmira.dntis.ro [193.226.101.140]) by
lists.samba.org (Postfix) with ESMTP id AEB4F4226 for
<samba at samba.org>; Tue, 12 Jun 2001 09:07:21 -0700 (PDT)
Received: from localhost (alex at localhost) by palmira.dntis.ro
(8.11.0/8.11.0) with ESMTP id f5CG9rD04224; Tue, 12 Jun 2001 19:09:53
+0300
Date: Tue, 12 Jun 2001 19:09:53 +0300 (EEST)
From: <alex at palmira.dntis.ro>
To: naughton at domino.danielwoodhead.com
Cc: samba at samba.org
Subject: Re: 2.2.0 binaries for redhat 7.1
In-Reply-To: <OF403CA93D.9198F49E-ON86256A69.0055CF40 at DANIELWOODHEAD.COM
>
Message-ID: <Pine.LNX.4.21.0106121905540.4210-100000 at palmira.dntis.ro>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Go to http://samba.org, click on download sites -> Poland->http
Alex Iruc
On Tue, 12 Jun 2001 naughton at domino.danielwoodhead.com wrote:
> Does anyone know a location for 2.2.0 binaries (rpms) for redhat 7.1. I've
> checked the usual places: rpmfind.net has some rawhide versions without the
> platform specified with some readline depency problems, samba.org has some
> for 7.0 - nothing for 7.1. Any pointers would be appreciated. Thanks
>
> Dan Naughton
>
Return-Path: <bhelms at nicusa.com>
Delivered-To: samba at lists.samba.org
Received: from intranet.nol.org (intranet.stateinfo.com
[206.222.217.51]) by lists.samba.org (Postfix) with ESMTP id 30DE94441
for <samba at lists.samba.org>; Tue, 12 Jun 2001 09:25:19 -0700 (PDT)
Received: from powder ([208.132.61.3]) by intranet.nol.org (8.9.3/8.9.3)
with SMTP id LAA02391; Tue, 12 Jun 2001 11:24:52 -0500
Content-Type: text/plain; charset="iso-8859-1"
From: "Benny D. Helms" <bhelms at nicusa.com>
Reply-To: bhelms at nicusa.com
To: samba at lists.samba.org
Subject: Re: samba digest, Vol 1 #437 - 45 msgs
Date: Tue, 12 Jun 2001 10:23:26 -0600
X-Mailer: KMail [version 1.2]
References: <20010612150243.DEE6E4AE7 at lists.samba.org>
In-Reply-To: <20010612150243.DEE6E4AE7 at lists.samba.org>
MIME-Version: 1.0
Message-Id: <01061210232604.08324 at powder>
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
All is not well. When I try restarting the httpd server to implement the new
changes, I get the following error:
# /usr/HTTPServer/bin/httpd -f /usr/HTTPServer/conf/httpd.conf
Syntax error on line 70 of /usr/HTTPServer/conf/httpd.conf:
Can't locate API module structure `auth_pwd' in file
/usr/HTTPServer/libexec/mod_auth_pwd.so: Function not implemented (auth_pwd)
Does this mean the compilation is faulty?
Benny
On Tuesday 12 June 2001 09:02 am, you wrote:
> Send samba mailing list submissions to
> samba at lists.samba.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.samba.org/mailman/listinfo/samba
> or, via email, send a message with subject or body 'help' to
> samba-request at lists.samba.org
>
> You can reach the person managing the list at
> samba-admin at lists.samba.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of samba digest..."
>
>
> Today's Topics:
>
> 1. Re: Installing Samba on Sun sparc (White, Franklin D (Franklin)** CTR
> **) 2. New K12 Software (kpeters at schoolcenter.com)
> 3. Win2K problem (Oswald P. Backus)
> 4. Samba 2.2.0 and 'max connections' (Oliver Schulze L.)
> 5. samba question (Xiaomin Dong)
> 6. Samba Window 2000. (Campbell, Russell P)
> 7. Winbindd auth problems (Ephi Dror)
> 8. Re: Samba 2.2.0 and 'max connections' (Andrew Bartlett)
> 9. Re: log.winbindd error (Tim Potter)
> 10. Re: limit on the share name to 13 characters? (Tim Potter)
> 11. Cinsel problemlerinize son verebilirsiniz (Dr. Sadi Uzun)
> 12. Re: Samba 2.2.0 and 'max connections' (Oliver Schulze L.)
> 13. Re: Can't get Linux 7.1/ Win 98 operation (Raymond Lutz)
> 14. Printing from Win98 to Windows2000 Pro. printer. (Claus Jeppesen)
> 15. newbie problems. (Thomas M. Parris)
> 16. Re: newbie problems. (David Rankin)
> 17. RE: newbie problems. (Thomas M. Parris)
> 18. samba-vos - problem with authentication with WinNT (ERIC FERNANDEZ,
> ITID) 19. smbd not running (=?iso-8859-2?Q?Michal_K=F8ivka?=)
> 20. Re: Installing Samba on Sun sparc (Christian Barth)
> 21. Mapping samba shares takes too long !? (Vladuta Cristian)
> 22. how do i... (Alvin Sim)
> 23. Re: Re: Samba processes not terminating on server (Tony House)
> 24. Re: smbd not running (Michael Ott)
> 25. Browsing workgroups on remote subnets (Saad Moten)
> 26. Users and groups under Samba? (Jean-Christian Imbeault)
> 27. Access a share as a different user than before? (Jean-Christian
> Imbeault) 28. Credential conflict? (Jean-Christian Imbeault)
> 29. Improved smbclient resume support. (Rex Tsai)
> 30. printer - Access denied (Amir Bukhri)
> 31. Here's an easier question. :) (Henning Botha)
> 32. Re: Samba: Problem mit check_log_size (Hubert Palme)
> 33. smbmount/smbpasswd: spezify path to smb.conf (Wolfgang Kretzschmar)
> 34. Re: Credential conflict? (Edgar Soldin)
> 35. Can't write to a share from Win98 (Bruce)
> 36. Re: Fw: LOG FILE (M. Kilroy)
> 37. RE: smbd not running (Denis Beauchemin)
> 38. Samba share mapping (Vladuta Cristian)
> 39. Windows 95 clients cannot connect (alexander.skwar at delphiauto.com)
> 40. Samba 2.07 for HPUX (Heike Navarro)
> 41. Re: Samba share mapping (Andrew Bartlett)
> 42. undefined: slprintf (Gary Algier)
> 43. Binary packages for 2.0.9 and 2.2.0 on 10.20 and 11.0 HP-UX
> (MCCALL,DON (HP-USA,ex1)) 44. Winbind + suse (Andrei Gologan)
> 45. Re: samba-vos - problem with authentication with WinNT
> (Arnold.O.Andrews at seagate.com)
>
> --__--__--
>
> Message: 1
> From: "White, Franklin D (Franklin)** CTR **" <fdwhite at lucent.com>
> To: "'samba at samba.org'" <samba at samba.org>
> Subject: Re: Installing Samba on Sun sparc
> Date: Mon, 11 Jun 2001 15:03:33 -0400
>
> Samba has been installed onto a Sun sparc server bu I have not been able to
> connect to the sharedrives. The SA who performed this installation is new
> to installing Samba and does not have a feel as to what the problem might
> be.
>
> I can connect to the sharedrive only with a PC loaded with Win2000 by
> passing the Unix userid/password. I cannot connect on any of the Win95 PCs
> and unfortunately all of the users have Win95 installed. The setup desired
> was to be able to have all the user's connected without passing
> userid/password and hopefully not having to create a user account on the
> server.
>
> We currently have Samba running on PC loaded with Linux that the users have
> access to. The SA who installed this unfortunately have moved on and cannot
> provide insight into what we need.
>
> I have been viewing the documentation for Samba installation but cannot
> find anything for installation on a Unix platform.
>
> Is there a solution available which I cannot find in the online
> documentation?
>
> Thanks,
> Frank White
> * Mail: 900 North Point Parkway Alpharetta, GA 30076 Rm: 93N350C
> * email: fdwhite at lucent.com or fdwhite at us.ibm.com
> * Phone: (770) 750-2161
> * Pager: (800) 759-8352 pin 1634904
> * Fax: (770) 750-4867
> <<...OLE_Obj...>>
>
> --__--__--
>
> Message: 2
> From: kpeters at schoolcenter.com
> Reply-To: kpeters at schoolcenter.com
> To: samba at samba.org
> Subject: New K12 Software
> Date: Mon, 11 Jun 2001 12:28:49 -0700 (PDT)
>
> Hey there, I was wondering if you were interested in seeing a new way to
> get more of your staff involved in creating and maintaining web pages. If
> you are not interested, but know of somebody that is, please let them know
> they are more than welcome to contact me. Thank you.
>
> -Kyle Peters
> http://www.schoolcenter.com
> 1.888.642.4448
>
> --__--__--
>
> Message: 3
> From: "Oswald P. Backus" <backus at cadence.com>
> Date: Mon, 11 Jun 2001 13:30:21 -0700 (PDT)
> To: samba at lists.samba.org
> Subject: Win2K problem
>
> FYI:
> Samba has been working pretty much perfectly for us with NT for
> accessing clearcase vobs from a Sun E450 running Solaris 2.7.
> Recently, however, we've started having some strange problems with a
> couple of machines that we've moved on to Win2K. Things work for a
> while, and then we get lots of these errors:
>
> [2001/06/11 12:55:15, 0] lib/debug.c:reopen_logs(335)
> Unable to open new log file /usr/local/samba/var/log.othello: No such
> file or directory [2001/06/11 12:55:15, 0] lib/username.c:map_username(87)
> can't open username map /usr/local/samba/lib/mapfile. Error No such file
> or directory
>
>
> and life on the Win2K box is pretty confused. Has anyone seen this?
> Got any ideas on how to resolve it? The files that it claims are not
> there, in fact are there!
> We were using 2.0.7, and so I tried moving to 2.2.0, but that didn't
> help.
>
> Thanks for any info you can pass on.
>
> Ozzie,
>
> --__--__--
>
> Message: 4
> Date: Mon, 11 Jun 2001 16:28:54 -0400
> From: "Oliver Schulze L." <oliver at samera.com.py>
> To: samba at lists.samba.org
> Subject: Samba 2.2.0 and 'max connections'
>
> Hi.
> I'm writing about the issue of the option 'max connections' in samba 2.2.0
> I have downgraded to 2.0.7 because of this issue and now I really need to
> have samba 2.2.x running in my production server.
>
> So, my cuestion is: can I download a patch for 2.2.0 that resolve this
> issue?
> Or should I dowload the source via CVS?
> If I should download the source code via CVS, is there any
> "nightly build" of the CVS?
>
> Thanks
> Oliver
> --
> Oliver Schulze L.
> oliver at samera.com.py <mailto:oliver at samera.com.py>
> Asuncion-Paraguay
>
> --__--__--
>
> Message: 5
> Date: Mon, 11 Jun 2001 17:18:34 -0400 (EDT)
> From: Xiaomin Dong <xdong at xpedite.com>
> To: samba at lists.samba.org
> Cc: Xiaomin Dong <xdong at xpedite.com>
> Subject: samba question
>
> Samba guru,
>
> I see there are a lot of complaints about samba.
> Please help me to get rid of them.
>
> Thanks
>
> Xiaomin Dong
> SA
>
> # tail /var/adm/messages
> Jun 11 16:41:41 cs_server6 inetd[143]: netbios-ns/udp server failing
> (looping), service terminated Jun 11 16:42:26 cs_server6 inetd[143]:
> /opt/samba/bin/nmbd: Child Status Changed Jun 11 16:42:58 cs_server6 last
> message repeated 38 times
> Jun 11 16:42:59 cs_server6 inetd[143]: netbios-ns/udp server failing
> (looping), service terminated Jun 11 16:53:15 cs_server6 inetd[143]:
> /opt/samba/bin/nmbd: Child Status Changed Jun 11 16:53:44 cs_server6 last
> message repeated 38 times
> Jun 11 16:53:45 cs_server6 inetd[143]: netbios-ns/udp server failing
> (looping), service terminated Jun 11 17:04:11 cs_server6 inetd[143]:
> /opt/samba/bin/nmbd: Child Status Changed Jun 11 17:04:35 cs_server6 last
> message repeated 38 times
> Jun 11 17:04:36 cs_server6 inetd[143]: netbios-ns/udp server failing
> (looping), service terminated #
>
> --__--__--
>
> Message: 6
> From: "Campbell, Russell P" <Russell.Campbell at PSS.Boeing.com>
> To: "'samba at lists.samba.org'" <samba at lists.samba.org>
> Subject: Samba Window 2000.
> Date: Mon, 11 Jun 2001 14:31:39 -0700
>
> WE are on a HP9000 HPUX 10.20
>
> We have had problems using office products Word and Excel as well as Oracle
> Forms Developer running on W2K while accessing files located on HP-UX
> workstations via Samba. Some files open properly, others generate errors
> like this one from Word: 'The instruction at "0x300b9dbe" referenced memory
> at "0x00000000". The memory could not be "read".' This error occurred
> when attempting to open the file. When the same files are on an NT share,
> or local on the W2K PC, no errors occur. This problem started aft r we
> upgraded our PC to Windows 2000.
>
>
>
>
> Russell P. Campbell
> HPUX System Administration
> Engineering Simulation & Analysis
> *Sprint PCS Number (206)679-3391 Pager: (206) 416-3839
> Sprint Message: http://www.messaging.sprintpcs.com/sms
> <http://www.messaging.sprintpcs.com/sms> *M/S 70-27
>
> [demime 0.98b removed an attachment of type application/ms-tnef]
>
> --__--__--
>
> Message: 7
> Reply-To: <edror at panasas.com>
> From: "Ephi Dror" <edror at panasas.com>
> To: "Samba (E-mail)" <samba at lists.samba.org>
> Subject: Winbindd auth problems
> Date: Mon, 11 Jun 2001 18:15:32 -0400
>
> Hi All,
>
> I am using cvs HEAD version (6/7/01) of SAMBA on Linux system and have
> problems with authentications of users. I use a domain environment and I
> added my Linux system to be part of the domain.
>
> Unfortunately, I discovered many problems and I am not sure if this is my
> stupid configuration or understanding or it is not quite working at the
> present time.
>
> Below is my status and I would be very to happy to hear what did I do
> wrong.
>
> I will be glad to help in coding and debugging or tracing different
> scenarios if needed.
>
> What is the status of winbindd as it is on cvs HEAD anyway? Is in any other
> cvs tag to check out or other place to get better version of winbindd?
>
> Here is the list of my issues:
>
> 1.
> Winbindd seems to work OK as a daemon in general, I did get memory
> allocation failed but it continues. Then I keep getting other errors depend
> of what I do and as soon as I get major error all applications that suppose
> to contact winbindd are failing.
> When I run wbinfo -g it works OK but when I run wibinfo -u it failed big
> time, the daemon still alive but I cannot even execute another wbinfo -g
> after that. I must kill the daemon and rerun it.
>
> Running getent group seems to work OK but give me also user names and only
> the first 3 groups. Running anything after that failed.
> Running getent passwd failed and running anything after that failed too.
>
> 2.
> Trying to access shares.
> I tried only win2000 and win98 clients and here are the results:
>
> From win98, on the client side I get a message:
> Resource: \\PETTIT\IPC$
> Password:
> And then I typed my password and it says password incorrect try again.
>
> On the server side, I passed many things but failed in smbd/password.c
> domain_client_validate, nochalange done - password failed.
>
>
> From Win2000, on the client, side, I get a message:
> Incorrect password or unknown username for:
> \\Pettit
> Connect As:
> Password:
>
> On the server side, I didn't get far because the domain name come up NULL
> so it failed on that test.
>
> Below are two logs log98.txt and log2000.txt that show full debug info.
>
> I might just have a stupid configuration or installation mistakes. I am
> sure that my basic configuration must work since it is a very typical
> setup.
>
> Any help will be highly appreciated and benefit all of us.
>
> Thanks,
> Ephi
>
> Logs:
> =========
>
> 98 log:
> ---------------------
>
> ===========================================================================
>= ===
> Log98.txt
>
>
> [2001/06/08 14:41:30, 5] rpc_parse/parse_prs.c:dbg_rpunival(658)
> 0094 buffer : M.C.K.I.N.L.E.Y.
> [2001/06/08 14:41:30, 5] rpc_parse/parse_prs.c:prs_uint32(547)
> 00a4 status: 00000000
> [2001/06/08 14:41:30, 4]
> nsswitch/winbindd_util.c:domain_sequence_number(861)
> got domain sequence number for PANASAS of 1770
> [2001/06/08 14:41:30, 0]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(136)
> @@@EPHI 3 OK
> [2001/06/08 14:41:30, 3]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
> [26720]: getpwnam panasas+edror
> [2001/06/08 14:41:30, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
> @@@EPHI In parse_domain_user domuser is panasas+edror, sep is +
> [2001/06/08 14:41:30, 3]
> nsswitch/winbindd_cache.c:get_cache_sequence_number(112)
> CACHESEQ PANASAS/USR/edror is 1770
> [2001/06/08 14:41:30, 3]
> nsswitch/winbindd_cache.c:cached_sequence_number(68)
> cached sequence number for PANASAS is 1770
> [2001/06/08 14:41:30, 0]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(136)
> @@@EPHI 3 OK
> [2001/06/08 14:41:30, 3]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
> [26720]: getpwnam panasas+edror
> [2001/06/08 14:41:30, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
> @@@EPHI In parse_domain_user domuser is panasas+edror, sep is +
> [2001/06/08 14:41:30, 3]
> nsswitch/winbindd_cache.c:get_cache_sequence_number(112)
> CACHESEQ PANASAS/USR/edror is 1770
> [2001/06/08 14:41:30, 3]
> nsswitch/winbindd_cache.c:cached_sequence_number(68)
> cached sequence number for PANASAS is 1770
> [2001/06/08 14:41:30, 0]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(136)
> @@@EPHI 3 OK
> [2001/06/08 14:41:30, 6] nsswitch/winbindd.c:new_connection(324)
> accepted socket 13
> [2001/06/08 14:41:30, 3] nsswitch/winbindd_pam.c:winbindd_pam_auth(58)
> [26720]: pam auth panasas+edror
> [2001/06/08 14:41:30, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(72)
> @@@EPHI in winbindd_pam_auth name_domain is PANASAS
> [2001/06/08 14:41:30, 0] smbd/password.c:domain_client_validate(1557)
> domain_client_validate: no challenge done - password failed
> [2001/06/08 14:41:30, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(87)
> @@@EPHI in winbindd_pam_auth result 0
> [2001/06/08 14:41:31, 3]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
> [26720]: getpwnam EDROR
> [2001/06/08 14:41:31, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
> @@@EPHI In parse_domain_user domuser is EDROR, sep is +
> [2001/06/08 14:41:31, 0]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
> @@@EPHI 1 user name_domain is null
> [2001/06/08 14:41:31, 3]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
> [26720]: getpwnam PANASAS+EDROR
> [2001/06/08 14:41:31, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
> @@@EPHI In parse_domain_user domuser is PANASAS+EDROR, sep is +
> [2001/06/08 14:41:31, 3]
> nsswitch/winbindd_cache.c:get_cache_sequence_number(112)
> CACHESEQ PANASAS/USR/EDROR is 1770
> [2001/06/08 14:41:31, 3]
> nsswitch/winbindd_cache.c:cached_sequence_number(68)
> cached sequence number for PANASAS is 1770
> [2001/06/08 14:41:31, 0]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(136)
> @@@EPHI 3 OK
> [2001/06/08 14:41:31, 3]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
> [26720]: getpwnam panasas+edror
> [2001/06/08 14:41:31, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
> @@@EPHI In parse_domain_user domuser is panasas+edror, sep is +
> [2001/06/08 14:41:31, 3]
> nsswitch/winbindd_cache.c:get_cache_sequence_number(112)
> CACHESEQ PANASAS/USR/edror is 1770
> [2001/06/08 14:41:31, 3]
> nsswitch/winbindd_cache.c:cached_sequence_number(68)
> cached sequence number for PANASAS is 1770
> [2001/06/08 14:41:31, 0]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(136)
> @@@EPHI 3 OK
> [2001/06/08 14:41:31, 3]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
> [26720]: getpwnam panasas+edror
> [2001/06/08 14:41:31, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
> @@@EPHI In parse_domain_user domuser is panasas+edror, sep is +
> [2001/06/08 14:41:31, 3]
> nsswitch/winbindd_cache.c:get_cache_sequence_number(112)
> CACHESEQ PANASAS/USR/edror is 1770
> [2001/06/08 14:41:31, 3]
> nsswitch/winbindd_cache.c:cached_sequence_number(68)
> cached sequence number for PANASAS is 1770
> [2001/06/08 14:41:31, 0]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(136)
> @@@EPHI 3 OK
> [2001/06/08 14:41:31, 6] nsswitch/winbindd.c:new_connection(324)
> accepted socket 14
> [2001/06/08 14:41:31, 3] nsswitch/winbindd_pam.c:winbindd_pam_auth(58)
> [26720]: pam auth panasas+edror
> [2001/06/08 14:41:31, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(72)
> @@@EPHI in winbindd_pam_auth name_domain is PANASAS
> [2001/06/08 14:41:31, 0] smbd/password.c:domain_client_validate(1557)
> domain_client_validate: no challenge done - password failed
> [2001/06/08 14:41:31, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(87)
> @@@EPHI in winbindd_pam_auth result 0
> --------------------
>
> 2000 log
> --------------------
>
> ===========================================================================
>= ===
> Log2000.txt
>
>
> [2001/06/08 14:53:00, 3] nsswitch/winbindd_util.c:debug_conn_state(36)
> server: dc=MCKINLEY, pwdb_init=1, lsa_hnd=1
> [2001/06/08 14:53:00, 3] nsswitch/winbindd_util.c:debug_conn_state(42)
> PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
> [2001/06/08 14:53:00, 3] nsswitch/winbindd_util.c:debug_conn_state(36)
> server: dc=MCKINLEY, pwdb_init=1, lsa_hnd=1
> [2001/06/08 14:53:00, 3] nsswitch/winbindd_util.c:debug_conn_state(42)
> PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
> [2001/06/08 14:53:09, 6] nsswitch/winbindd.c:new_connection(324)
> accepted socket 3
> [2001/06/08 14:53:09, 3]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
> [26728]: getpwnam edror
> [2001/06/08 14:53:09, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
> @@@EPHI In parse_domain_user domuser is edror, sep is +
> [2001/06/08 14:53:09, 0]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
> @@@EPHI 1 user name_domain is null
> [2001/06/08 14:53:10, 3]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
> [26728]: getpwnam edror
> [2001/06/08 14:53:10, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
> @@@EPHI In parse_domain_user domuser is edror, sep is +
> [2001/06/08 14:53:10, 0]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
> @@@EPHI 1 user name_domain is null
> [2001/06/08 14:53:10, 6] nsswitch/winbindd.c:new_connection(324)
> accepted socket 13
> [2001/06/08 14:53:10, 3] nsswitch/winbindd_pam.c:winbindd_pam_auth(58)
> [26728]: pam auth edror
> [2001/06/08 14:53:10, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(69)
> @@@EPHI in winbindd_pam_auth name_domain is null
> [2001/06/08 14:53:11, 3]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
> [26728]: getpwnam edror
> [2001/06/08 14:53:11, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
> @@@EPHI In parse_domain_user domuser is edror, sep is +
> [2001/06/08 14:53:11, 0]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
> @@@EPHI 1 user name_domain is null
> [2001/06/08 14:53:11, 6] nsswitch/winbindd.c:new_connection(324)
> accepted socket 14
> [2001/06/08 14:53:11, 3] nsswitch/winbindd_pam.c:winbindd_pam_auth(58)
> [26728]: pam auth edror
> [2001/06/08 14:53:11, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(69)
> @@@EPHI in winbindd_pam_auth name_domain is null
> [2001/06/08 14:53:12, 3]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
> [26728]: getpwnam edror
> [2001/06/08 14:53:12, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
> @@@EPHI In parse_domain_user domuser is edror, sep is +
> [2001/06/08 14:53:12, 0]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
> @@@EPHI 1 user name_domain is null
> [2001/06/08 14:53:12, 6] nsswitch/winbindd.c:new_connection(324)
> accepted socket 15
> [2001/06/08 14:53:12, 3] nsswitch/winbindd_pam.c:winbindd_pam_auth(58)
> [26728]: pam auth edror
> [2001/06/08 14:53:12, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(69)
> @@@EPHI in winbindd_pam_auth name_domain is null
> [2001/06/08 14:53:13, 3]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
> [26728]: getpwnam edror
> [2001/06/08 14:53:13, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
> @@@EPHI In parse_domain_user domuser is edror, sep is +
> [2001/06/08 14:53:13, 0]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
> @@@EPHI 1 user name_domain is null
> [2001/06/08 14:53:13, 6] nsswitch/winbindd.c:new_connection(324)
> accepted socket 16
> [2001/06/08 14:53:13, 3] nsswitch/winbindd_pam.c:winbindd_pam_auth(58)
> [26728]: pam auth edror
> [2001/06/08 14:53:13, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(69)
> @@@EPHI in winbindd_pam_auth name_domain is null
> [2001/06/08 14:53:14, 5] nsswitch/winbindd.c:client_read(405)
> read failed on sock 16, pid 26728: EOF
> [2001/06/08 14:53:14, 5] nsswitch/winbindd.c:client_read(405)
> read failed on sock 15, pid 26728: EOF
> [2001/06/08 14:53:14, 5] nsswitch/winbindd.c:client_read(405)
> read failed on sock 14, pid 26728: EOF
> [2001/06/08 14:53:14, 5] nsswitch/winbindd.c:client_read(405)
> read failed on sock 13, pid 26728: EOF
> [2001/06/08 14:53:14, 5] nsswitch/winbindd.c:client_read(405)
> read failed on sock 3, pid 26728: EOF
> [2001/06/08 14:53:44, 3]
> nsswitch/winbindd_util.c:establish_connections(351) establishing
> connections
> [2001/06/08 14:53:44, 3] nsswitch/winbindd_util.c:debug_conn_state(36)
> server: dc=MCKINLEY, pwdb_init=1, lsa_hnd=1
> [2001/06/08 14:53:44, 3] nsswitch/winbindd_util.c:debug_conn_state(42)
> PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
> [2001/06/08 14:53:44, 3] nsswitch/winbindd_util.c:debug_conn_state(36)
> server: dc=MCKINLEY, pwdb_init=1, lsa_hnd=1
> [2001/06/08 14:53:44, 3] nsswitch/winbindd_util.c:debug_conn_state(42)
> PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
> [2001/06/08 14:54:14, 3]
> nsswitch/winbindd_util.c:establish_connections(351) establishing
> connections
> [2001/06/08 14:54:14, 3] nsswitch/winbindd_util.c:debug_conn_state(36)
> server: dc=MCKINLEY, pwdb_init=1, lsa_hnd=1
> [2001/06/08 14:54:14, 3] nsswitch/winbindd_util.c:debug_conn_state(42)
> PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
> [2001/06/08 14:54:14, 3] nsswitch/winbindd_util.c:debug_conn_state(36)
> server: dc=MCKINLEY, pwdb_init=1, lsa_hnd=1
> [2001/06/08 14:54:14, 3] nsswitch/winbindd_util.c:debug_conn_state(42)
> PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
> [2001/06/08 14:54:26, 6] nsswitch/winbindd.c:new_connection(324)
> accepted socket 3
> [2001/06/08 14:54:26, 3]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
> [26732]: getpwnam edror
> [2001/06/08 14:54:26, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
> @@@EPHI In parse_domain_user domuser is edror, sep is +
> [2001/06/08 14:54:26, 0]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
> @@@EPHI 1 user name_domain is null
> [2001/06/08 14:54:26, 3]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
> [26732]: getpwnam edror
> [2001/06/08 14:54:26, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
> @@@EPHI In parse_domain_user domuser is edror, sep is +
> [2001/06/08 14:54:26, 0]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
> @@@EPHI 1 user name_domain is null
> [2001/06/08 14:54:26, 6] nsswitch/winbindd.c:new_connection(324)
> accepted socket 13
> [2001/06/08 14:54:26, 3] nsswitch/winbindd_pam.c:winbindd_pam_auth(58)
> [26732]: pam auth edror
> [2001/06/08 14:54:26, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(69)
> @@@EPHI in winbindd_pam_auth name_domain is null
> [2001/06/08 14:54:27, 3]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(104)
> [26732]: getpwnam edror
> [2001/06/08 14:54:27, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
> @@@EPHI In parse_domain_user domuser is edror, sep is +
> [2001/06/08 14:54:27, 0]
> nsswitch/winbindd_user.c:winbindd_getpwnam_from_user(115)
> @@@EPHI 1 user name_domain is null
> [2001/06/08 14:54:27, 6] nsswitch/winbindd.c:new_connection(324)
> accepted socket 14
> [2001/06/08 14:54:27, 3] nsswitch/winbindd_pam.c:winbindd_pam_auth(58)
> [26732]: pam auth edror
> [2001/06/08 14:54:27, 0] nsswitch/winbindd_pam.c:winbindd_pam_auth(69)
> @@@EPHI in winbindd_pam_auth name_domain is null
> [2001/06/08 14:54:28, 5] nsswitch/winbindd.c:client_read(405)
> read failed on sock 14, pid 26732: EOF
> [2001/06/08 14:54:28, 5] nsswitch/winbindd.c:client_read(405)
> read failed on sock 13, pid 26732: EOF
> [2001/06/08 14:54:28, 5] nsswitch/winbindd.c:client_read(405)
> read failed on sock 3, pid 26732: EOF
> [2001/06/08 14:54:29, 6] nsswitch/winbindd.c:new_connection(324)
> accepted socket 3
> [2001/06/08 14:54:29, 3] nsswitch/winbindd_group.c:winbindd_getgroups(857)
> [26733]: getgroups nobody
> [2001/06/08 14:54:29, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
> @@@EPHI In parse_domain_user domuser is nobody, sep is +
> [2001/06/08 14:54:29, 6] nsswitch/winbindd.c:new_connection(324)
> accepted socket 13
> [2001/06/08 14:54:29, 3] nsswitch/winbindd_group.c:winbindd_getgroups(857)
> [26733]: getgroups nobody
> [2001/06/08 14:54:29, 0] nsswitch/winbindd_util.c:parse_domain_user(908)
> @@@EPHI In parse_domain_user domuser is nobody, sep is +
> [2001/06/08 14:54:59, 3]
> nsswitch/winbindd_util.c:establish_connections(351) establishing
> connections
> [2001/06/08 14:54:59, 3] nsswitch/winbindd_util.c:debug_conn_state(36)
> server: dc=MCKINLEY, pwdb_init=1, lsa_hnd=1
> [2001/06/08 14:54:59, 3] nsswitch/winbindd_util.c:debug_conn_state(42)
> PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
> [2001/06/08 14:54:59, 3] nsswitch/winbindd_util.c:debug_conn_state(36)
> server: dc=MCKINLEY, pwdb_init=1, lsa_hnd=1
> [2001/06/08 14:54:59, 3] nsswitch/winbindd_util.c:debug_conn_state(42)
> PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
> util.c:debug_conn_state(42)
> PANASAS: dc=MCKINLEY, got_sid=1, sam_hnd=1 sam_dom_hnd=1
>
>
> ===========================================================================
>= ===
> -------------------
>
> --__--__--
>
> Message: 8
> Date: Tue, 12 Jun 2001 08:34:55 +1000
> From: Andrew Bartlett <abartlet at pcug.org.au>
> To: "Oliver Schulze L." <oliver at samera.com.py>
> Cc: samba at lists.samba.org
> Subject: Re: Samba 2.2.0 and 'max connections'
>
> "Oliver Schulze L." wrote:
> > Hi.
> > I'm writing about the issue of the option 'max connections' in samba
> > 2.2.0 I have downgraded to 2.0.7 because of this issue and now I really
> > need to have samba 2.2.x running in my production server.
> >
> > So, my cuestion is: can I download a patch for 2.2.0 that resolve this
> > issue?
> > Or should I dowload the source via CVS?
> > If I should download the source code via CVS, is there any
> > "nightly build" of the CVS?
>
> Current CVS of SAMBA_2_2 contains a fix for this. There is no 'nightly
> build', as use of CVS code isn't exactly encouraged :-), and there are
> soo many different options one might decide to build with.
>
> Andrew Bartlett
Return-Path: <bhelms at nicusa.com>
Delivered-To: samba at lists.samba.org
Received: from intranet.nol.org (intranet.stateinfo.com
[206.222.217.51]) by lists.samba.org (Postfix) with ESMTP id 9D3C34C81
for <samba at lists.samba.org>; Tue, 12 Jun 2001 09:35:52 -0700 (PDT)
Received: from powder ([208.132.61.3]) by intranet.nol.org (8.9.3/8.9.3)
with SMTP id LAA03507 for <samba at lists.samba.org>; Tue, 12 Jun 2001
11:35:29 -0500
Content-Type: text/plain; charset="iso-8859-1"
From: "Benny D. Helms" <bhelms at nicusa.com>
Reply-To: bhelms at nicusa.com
To: samba at lists.samba.org
Subject: Ooops!
Date: Tue, 12 Jun 2001 10:34:03 -0600
X-Mailer: KMail [version 1.2]
MIME-Version: 1.0
Message-Id: <01061210340306.08324 at powder>
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
My bad, gang. That last message about the /usr/HTTPServer/bin/httpd -f etc.
was supposed to go to another recipient and it was sent to the list by
mistake. You have my humble apologies.
Benny / Xitron
Return-Path: <AHYDLE at thq.com>
Delivered-To: samba at lists.samba.org
Received: from MAIL.thq.com (unknown [63.80.88.15]) by lists.samba.org
(Postfix) with ESMTP id E803A4539 for <samba at lists.samba.org>; Tue, 12
Jun 2001 09:40:43 -0700 (PDT)
Received: by MAIL with Internet Mail Service (5.5.2653.19) id
<LJ91LD9V>; Tue, 12 Jun 2001 09:36:40 -0700
Message-ID: <44EAA1FB4AB8D411B03C00508B6D6E28012AF2AF at MAIL>
From: AHYDLE at thq.com
To: samba at lists.samba.org
Subject: A couple of questions
Date: Tue, 12 Jun 2001 09:36:37 -0700
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="us-ascii"
X-Converted-To-Plain-Text: from multipart/alternative by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
1.) We are currently implementing some new security features on our network
and I think I may have found an interesting use for smbmount and samba. We
are moving our FTP server (NT Server) on to the DMZ of our network.
Unfortunately users still are going to be accessing the folder through
network neighborhood on there desktops, so if the users are still going to
access it that way we will need to open all kinds of ports to the DMZ for
wins and all the other garbage M$ requires. Now the idea we had was to use
smbmount and mount the share to a linux box on the internal network and then
share it out with samba from there. It looks like it will work but when a
new file is created or a user accesses a file it is using sambas permissions
and not the NT servers. Do you think if I upgraded to samba 2.2 and added
ACL support I could get this to work? Or am I wasting my time?
2.) I am trying to configure apache with ntlm security authenticating to an
NT domain. I have no problem authenticating but it is still prompting for a
user name and password. Where NTLM should be pass-through authentication.
Has anyone been able to get mod-ntlm to work? Or is there a better way to do
pass-through authentication for apache?
Return-Path: <fmaresca at monssa.com.ar>
Delivered-To: samba at lists.samba.org
Received: from amadeus.monssa.com.ar (unknown [200.43.69.210]) by
lists.samba.org (Postfix) with ESMTP id 1B0E942F2 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 09:42:38 -0700 (PDT)
Received: from pc123 (pc123.monssa.com.ar [192.168.1.123]) by
amadeus.monssa.com.ar (8.9.3/8.8.7) with ESMTP id DAA00354 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 03:26:18 -0400
From: fmaresca at monssa.com.ar
To: samba at lists.samba.org
Date: Tue, 12 Jun 2001 13:31:37 -0300
MIME-Version: 1.0
Content-type: text/plain; charset="us-ascii"
Content-transfer-encoding: 7bit
Subject: Passwd change via SWAT
Message-ID: <3B2619B9.9557.6F789 at localhost>
Priority: normal
X-mailer: Pegasus Mail for Win32 (v3.12c)
X-Converted-To-Plain-Text: from text/enriched by demime 0.98b
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hello.
I got 2 hosts running samba. One is over a RH6.2 and it
works fine; the second machine is running samba over Debian
Potato and it was installed to replaces the other (old) machine.
The problem is that once samba is all configured and runs ok in
this new amchine, attempts to login in swat as an non-root user
fails.
this never was happens in the old machine, and users in the
network was able to change their passwd using swat. This problem
is relative to samba, swat or debian? Any ideas?
If is not the correct place to post this question, somebody knows
where swat have a mailing list?
Thank you.
Fernando
Fernando M. Maresca
Monitoring Station S.A.
48 n0 812 La Plata - BA - ARG
Tel/Fax: (54) 221 425 3355
Fernando M. Maresca Monitoring Station S.A. 48 n0 812 La Plata - BA -
ARG Tel/Fax: (54) 221 425 3355
Return-Path: <jstewart at rtl.org>
Delivered-To: samba at lists.samba.org
Received: from webserver.rtl.org (webserver2.rtl.org [63.94.12.188]) by
lists.samba.org (Postfix) with ESMTP id 5CD2A42F2 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 09:51:04 -0700 (PDT)
Received: from MIS3C.rtl.org ([63.106.163.130]) by webserver.rtl.org
(Switch-2.0.0/Switch-2.0.0) with ESMTP id f5CGqan24360 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 12:52:36 -0400
Message-Id: <5.0.2.1.0.20010612125208.00a9f710 at 63.94.12.188>
X-Sender: jstewart at 63.94.12.188
X-Mailer: QUALCOMM Windows Eudora Version 5.0.2
Date: Tue, 12 Jun 2001 12:54:59 -0400
To: samba at lists.samba.org
From: Jason Stewart <jstewart at rtl.org>
Subject: Quick Question
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Greetings,
Forgive me if this is off-topic, but how do I make a windows 2000 client
automatically log on to the samba share (when I log on the the system) so
that I do not see the username:password dialog box when my I connect to the
share? My win9x clients do this automatically when the primary network
logon is set to microsoft network.
Thanks,
Jason Stewart
Return-Path: <JL1 at gty.ci.henderson.nv.us>
Delivered-To: samba at lists.samba.org
Received: from cohntfs24.ci.henderson.nv.us (unknown [206.57.92.10]) by
lists.samba.org (Postfix) with ESMTP id 1D2254A9E for
<samba at lists.samba.org>; Tue, 12 Jun 2001 10:18:30 -0700 (PDT)
Received: from gty.ci.henderson.nv.us (unverified) by
cohntfs24.ci.henderson.nv.us (Content Technologies SMTPRS 4.1.5) with
SMTP id <Tac15630a54188753ac at cohntfs24.ci.henderson.nv.us> for
<samba at lists.samba.org>; Tue, 12 Jun 2001 10:12:54 -0700
Received: from HENMAIL2-Message_Server by gty.ci.henderson.nv.us with
Novell_GroupWise; Tue, 12 Jun 2001 10:16:51 -0700
Message-Id: <sb25ec13.020 at gty.ci.henderson.nv.us>
X-Mailer: Novell GroupWise 5.5.4
Date: Tue, 12 Jun 2001 10:16:31 -0700
From: "Jeff Landers" <JL1 at gty.ci.henderson.nv.us>
To: <samba at lists.samba.org>
Subject: Rookie problems
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
When I try to do a net view from my NT machine I get "The account is not
authorized to login from this station" What did I miss?
Jeff Landers
UNIX Sys Admin
City of Henderson, NV
702-566-2761
jl1 at gty.ci.henderson.nv.us
Return-Path: <jstewart at rtl.org>
Delivered-To: samba at lists.samba.org
Received: from webserver.rtl.org (webserver2.rtl.org [63.94.12.188]) by
lists.samba.org (Postfix) with ESMTP id 3B16D4271 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 10:33:24 -0700 (PDT)
Received: from MIS3C.rtl.org ([63.106.163.130]) by webserver.rtl.org
(Switch-2.0.0/Switch-2.0.0) with ESMTP id f5CHYgn24729; Tue, 12 Jun
2001 13:34:44 -0400
Message-Id: <5.0.2.1.0.20010612133403.033ef4d8 at 63.94.12.188>
X-Sender: jstewart at 63.94.12.188
X-Mailer: QUALCOMM Windows Eudora Version 5.0.2
Date: Tue, 12 Jun 2001 13:37:00 -0400
To: "Jeff Landers" <JL1 at gty.ci.henderson.nv.us>, <samba at lists.samba.org>
From: Jason Stewart <jstewart at rtl.org>
Subject: Re: Rookie problems
In-Reply-To: <sb25ec13.020 at gty.ci.henderson.nv.us>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Jeff,
Are you using encrypted passwords? If encrypt passwords does not
equal yes in your smb.conf, then you must also disable them on the client side.
Cheers,
Jason Stewart
At 10:16 AM 6/12/2001 -0700, Jeff Landers wrote:
>When I try to do a net view from my NT machine I get "The account is not
>authorized to login from this station" What did I miss?
>
>Jeff Landers
>UNIX Sys Admin
>City of Henderson, NV
>702-566-2761
>jl1 at gty.ci.henderson.nv.us
>--
>To unsubscribe from this list go to the following URL and read the
>instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <M.J.Rootes at shu.ac.uk>
Delivered-To: samba at lists.samba.org
Received: from sequoia.shu.ac.uk (sequoia.shu.ac.uk [143.52.2.81]) by
lists.samba.org (Postfix) with ESMTP id 594CD4684 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 10:37:58 -0700 (PDT)
Received: from electra.shu.ac.uk by sequoia.shu.ac.uk with inbound ESMTP
(local) with ESMTP; Tue, 12 Jun 2001 18:37:31 +0100
Received: by electra.shu.ac.uk with Internet Mail Service (5.5.2650.21)
id <LC5Y3JS4>; Tue, 12 Jun 2001 18:35:33 +0100
Message-ID: <B5EDC67328A3D311B0F70006293884CA01960681 at electra.shu.ac.uk>
From: "Rootes, Martin J" <M.J.Rootes at shu.ac.uk>
To: "'samba at lists.samba.org'" <samba at lists.samba.org>
Subject: Problem with quotas
Date: Tue, 12 Jun 2001 18:35:22 +0100
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2650.21)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Dear All,
We have some problems with quotas on a Sun E450 (Ilex) running Solaris 2.7 and Samba 2.0.6. What's been happening is that students
who have exceeded their quota are getting corrupt files, usually zero length, but no suitable warning. A colleage has been running some
tests and has found that with explorer if the file is small (35k or less) no error message is generated yet the file is zero length! Whilst
I'm aware that there may be a problem in the 2.0.6 version of Samba, we have compiled version 2.2 with quota support on a Solaris 8 box
(pine-cone) and still have problems with small files.
I've included the e-mail from the person who was running the tests to give more info.
Is there a fix for this problem? Ideally we would want the effect to be the same as if the student attempted to save to a full local disk.
Martin Rootes
Systems Support
-----Original Message-----
From: Jefferies, David W
Sent: 12 June 2001 17:18
To: Rootes, Martin J; Bower, Lee N
Cc: 'ZIG group'; Broadbridge, Stephen L
Subject: Disk full on Samba
Martin, Lee
I have been testing the behaviour of file copying and creating for Samba mapped drives both on Ilex and Pine-cone (with the new version of
Samba). The results are more or less the same for both and show a major problem.
Both the Samba 'drives' are full and I have been checking what windows API messages are returned and what the behaviour of Explorer is. Ilex
has a soft quota expired, Pine-cone is at hard quota.
Explorer
Large files will give a 'Disk Full' message. I have not tested a big range of file sizes but a 35k did not give a message where a 75k did.
Small files are copied silently but when the disk is full the file is truncated to 0 bytes. The most worrying aspect of this is that copying
a 5k version of a file where a 1k existed before resulted in the old version being left as a 0 byte file. No error message and the file name
is displayed in Explorer.
The behaviour appears to be the same in both versions of Samba.
Windows API
In both cases copying or creating a small file (2k) gave no error value and resulted in a 0 byte file.
Using a large file (75k).
Creating gave no message but on both servers left a 0 byte file.
Copying to Ilex gave an error value (39 - one of two possible API disk full codes) and created a 0 byte file. Copying to Pine-cone gave a 39
error but did not create a file. The difference in behaviour may be due to the differences in the version of Samba or to the different quota
settings (Ilex over soft & expired, Pine-cone over hard).
The Explorer behaviour would be explained if it was not getting the information that also appears to be lacking in the API tests. Other
Windows software will no doubt be affected in a similar manner.
Dave
=============================
Dave Jefferies
DST
Corporate Information Systems
Sheffield Hallam University
Tel. 0114 225 3757
Return-Path: <Errol.Fouquet at mms.gov>
Delivered-To: samba at lists.samba.org
Received: from imsdene.mms.gov (smtp.mms.gov [161.160.14.46]) by
lists.samba.org (Postfix) with ESMTP id BCFA6460F for
<samba at lists.samba.org>; Tue, 12 Jun 2001 10:40:51 -0700 (PDT)
Received: by imsdene.mms.gov with Internet Mail Service (5.5.2650.21) id
<MXBF6NCH>; Tue, 12 Jun 2001 11:40:31 -0600
Message-ID: <379313C94B76D2119AB60008C7A402E401E1FD0F at imsnolaa.nola.omm.
mms.gov>
From: "Fouquet, Errol" <Errol.Fouquet at mms.gov>
To: 'samba' <samba at lists.samba.org>
Cc: "'gcarter at valinux.com'" <gcarter at valinux.com>
Subject: IMPRINTS and other things
Date: Tue, 12 Jun 2001 11:40:15 -0600
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2650.21)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Gerald,
Just wondering ...
Did you ever get a chance to look into the problem I was having with
IMPRINTS being unable to deal with Microsoft CAB files?
Also ...
Are there bug fixes in the works which address print driver upload problems
with Samba2.2?
Like many others on the list, I've had numerous problems. It appears that my
ntdrivers.tdb file became corrupt, or merely unusable, at one point. As a
result, I've attempted to rebuild my server no less than 4 times, and each
time I encounter strange problems.
I know that bugs related to "rpcclient" and "large printcap files" have been
addressed, but I've tangled with some other bits of weirdness. Like, the W2K
client complaining that there are "no drivers associated" with a particular
printer, despite the fact that when browsing PRINT$ it shows up as an "HP
DeskJet blahblahblah". I've also had W2K clients unable to access "printer
properties" on certain printers. Any attempt at getting to "printer
properties" produces a Windows fatal error window ... and the application
locks up.
After reading your description of the bug related to "rpcclient", I felt
that my problems may somehow be related. Any thoughts?
Errol Fouquet - UNIX SysAdmin
email: errol.fouquet at mms.gov
Return-Path: <alex at palmira.dntis.ro>
Delivered-To: samba at lists.samba.org
Received: from palmira.dntis.ro (palmira.dntis.ro [193.226.101.140]) by
lists.samba.org (Postfix) with ESMTP id 199EE4C11 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 10:43:21 -0700 (PDT)
Received: from localhost (alex at localhost) by palmira.dntis.ro
(8.11.0/8.11.0) with ESMTP id f5CHjmo10593; Tue, 12 Jun 2001 20:45:48
+0300
Date: Tue, 12 Jun 2001 20:45:48 +0300 (EEST)
From: <alex at palmira.dntis.ro>
To: Jason Stewart <jstewart at rtl.org>
Cc: samba at lists.samba.org
Subject: Re: Quick Question
In-Reply-To: <5.0.2.1.0.20010612125208.00a9f710 at 63.94.12.188>
Message-ID: <Pine.LNX.4.21.0106122044140.10572-100000 at palmira.dntis.ro>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
You can enable this feature by using TweakUI. You can find it by
doing a search on GOOGLE.
Alex Iruc
On Tue, 12 Jun 2001, Jason Stewart wrote:
> Greetings,
>
> Forgive me if this is off-topic, but how do I make a windows 2000 client
> automatically log on to the samba share (when I log on the the system) so
> that I do not see the username:password dialog box when my I connect to the
> share? My win9x clients do this automatically when the primary network
> logon is set to microsoft network.
>
> Thanks,
> Jason Stewart
>
Return-Path: <JL1 at gty.ci.henderson.nv.us>
Delivered-To: samba at lists.samba.org
Received: from cohntfs24.ci.henderson.nv.us (unknown [206.57.92.10]) by
lists.samba.org (Postfix) with ESMTP id A66D1478B for
<samba at lists.samba.org>; Tue, 12 Jun 2001 11:09:07 -0700 (PDT)
Received: from gty.ci.henderson.nv.us (unverified) by
cohntfs24.ci.henderson.nv.us (Content Technologies SMTPRS 4.1.5) with
SMTP id <Tac15630a5418b58ed1 at cohntfs24.ci.henderson.nv.us> for
<samba at lists.samba.org>; Tue, 12 Jun 2001 11:03:24 -0700
Received: from HENMAIL2-Message_Server by gty.ci.henderson.nv.us with
Novell_GroupWise; Tue, 12 Jun 2001 11:07:21 -0700
Message-Id: <sb25f7e9.054 at gty.ci.henderson.nv.us>
X-Mailer: Novell GroupWise 5.5.4
Date: Tue, 12 Jun 2001 11:07:00 -0700
From: "Jeff Landers" <JL1 at gty.ci.henderson.nv.us>
To: <samba at lists.samba.org>
Subject: More rookie problems
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Ok
Jason told me to change my smb.conf to encrypted = yes. I populated my
smbpasswd file from my NIS map but when I try to change the smb password it
says it can't find the user (any user). The file is in the default location
and I also specificed it in my smb.conf. Help the rookie, please.
Return-Path: <mekilroy at risingedge.com>
Delivered-To: samba at lists.samba.org
Received: from mailhost.digitalselect.net (unknown [209.225.164.170]) by
lists.samba.org (Postfix) with ESMTP id A28144D68; Tue, 12 Jun 2001
11:21:21 -0700 (PDT)
Received: from wizzard.rising-edge (risingedge.com [216.181.63.36]) by
mailhost.digitalselect.net (8.11.1/8.11.1) with SMTP id f5CIMGS57102;
Tue, 12 Jun 2001 14:22:16 -0400 (EDT)
Received: from diamondback (unverified [192.168.0.26]) by
wizzard.rising-edge (EMWAC SMTPRS 0.83) with SMTP id
<B0000081907 at wizzard.rising-edge>; Tue, 12 Jun 2001 14:20:28 -0400
Message-ID: <080601c0f36c$5ad2dd00$1a00a8c0 at diamondback>
From: "M. Kilroy" <mekilroy at risingedge.com>
To: <samba at lists.samba.org>, <samba-ntdom at lists.samba.org>
Subject: Speaking of rookie problems....
Date: Tue, 12 Jun 2001 14:20:27 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Mailer: Microsoft Outlook Express 5.50.4133.2400
X-Antirelay: Good relay from local net2 192.168.0.0/24
X-Converted-To-Plain-Text: from multipart/alternative by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
After unsuccessful attempts at getting winbind running on RHL7.1, I decided to
try RHL7.0 in hopes that there was an incompatiblity issue I didn't know
about. The downgrade to 7.0 and the fresh install of the CVS HEAD version
produced even worse problems. Not only does winbind not run, samba doesn't
run now. I have read all the documentation, and configured everything
accordingly. I am going back to RHL7.1, but I would really like to find out
why winbind isn't starting with a ./winbind. I get an "Error looking up
Domain users" when I try wbinfo. Does anyone have ANY idea why or perhaps
care to please help me tackle this? I've been hacking at this over a week
now....
Return-Path: <rob at steinmetznet.com>
Delivered-To: samba at lists.samba.org
Received: from atl.steinmetznet.com (atl.steinmetznet.com
[38.212.143.60]) by lists.samba.org (Postfix) with ESMTP id 91E324D8B
for <samba at lists.samba.org>; Tue, 12 Jun 2001 11:23:15 -0700 (PDT)
Received: from steinmetznet.com (delilah [38.212.143.170]) by
atl.steinmetznet.com (8.8.8+Sun/8.8.8) with ESMTP id OAA12242; Tue, 12
Jun 2001 14:22:53 -0400 (EDT)
Message-ID: <3B265DFD.48F3075D at steinmetznet.com>
Date: Tue, 12 Jun 2001 14:22:53 -0400
From: Robert Steinmetz <rob at steinmetznet.com>
Organization: Steinmetz & Associates
X-Mailer: Mozilla 4.7 [en] (WinNT; I)
X-Accept-Language: en
MIME-Version: 1.0
To: samba at lists.samba.org
Subject: I need help with Roaming Profiles
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I need some help sorting out roaming profiles in a new Samba PDC. The
server is Solaris 2.6 x86 Samba is 2.2.0 compiled with gcc using all
defaults. File sharing and printing are working file. I am unable to get
roaming profiles to work correctly. It seems to work except the desktop
is not restored and cannot be changed, for example I can change the
desktop background, nothing happens. I have included part of my smb.conf
file below. Any help is appreciated.
; Primary Domain Controller
;
netbios name = LUCRETIA
workgroup = ATLANTA
os level = 65
preferred master = yes
domain master = yes
local master = yes
;
; Security
;
security = user
encrypt passwords = yes
;
; Domain Logons
;
domain logons = yes
domain admin users = rob
logon path = \\LUCRETIA\profiles\%u
logon drive = U:
logon home = \\LUCRETIA\%u
logon script = %u.bat
;
; Shares for Domain Control
;
[netlogon]
path = /usr/local/samba/netlogon
writable = no
write list = root
;shares for storing user profiles
[profiles]
path = /usr/local/samba/profiles
writable = yes
create mask = 0600
sdirectory mask = 0700
--
Robert Steinmetz, AIA
Principal
Steinmetz & Associates
New Orleans Atlanta
Return-Path: <urban at teststation.com>
Delivered-To: samba at lists.samba.org
Received: from fungus.teststation.com (fungus.teststation.com
[212.32.186.211]) by lists.samba.org (Postfix) with ESMTP id 43EC94D8E
for <samba at lists.samba.org>; Tue, 12 Jun 2001 11:23:28 -0700 (PDT)
Received: from fw.teststation.com (fw.teststation.com [212.32.186.210])
by fungus.teststation.com (8.11.2/8.11.2) with SMTP id f5CIMn027739;
Tue, 12 Jun 2001 20:22:49 +0200
Received: from COLA by fw.teststation.com via smtpd (for
fungus.teststation.com [212.32.186.211]) with SMTP; 12 Jun 2001
17:58:45 UT
Date: Tue, 12 Jun 2001 20:22:33 +0200 (CEST)
From: Urban Widmark <urban at teststation.com>
X-Sender: <puw at cola.teststation.com>
To: <AHYDLE at thq.com>
Cc: <samba at lists.samba.org>
Subject: Re: A couple of questions
In-Reply-To: <44EAA1FB4AB8D411B03C00508B6D6E28012AF2AF at MAIL>
Message-ID: <Pine.LNX.4.30.0106122004170.18311-100000 at cola.teststation.c
om>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Tue, 12 Jun 2001 AHYDLE at thq.com wrote:
> 1.) We are currently implementing some new security features on our network
> and I think I may have found an interesting use for smbmount and samba. We
> are moving our FTP server (NT Server) on to the DMZ of our network.
> Unfortunately users still are going to be accessing the folder through
> network neighborhood on there desktops, so if the users are still going to
> access it that way we will need to open all kinds of ports to the DMZ for
> wins and all the other garbage M$ requires. Now the idea we had was to use
> smbmount and mount the share to a linux box on the internal network and then
> share it out with samba from there. It looks like it will work but when a
> new file is created or a user accesses a file it is using sambas permissions
> and not the NT servers. Do you think if I upgraded to samba 2.2 and added
> ACL support I could get this to work? Or am I wasting my time?
Mounting a share with smbmount gives you a view of the NT fs on linux, but
it is incomplete. One thing is the mapping of permissions.
One smbmount is done as one user, all permissions are those of that user
and all accesses are made by that user (as far as the NT box is
concerned).
What you are seeing with ownership on files created on the server is
probably this (if you mount as user foo, all files created will be owned
by foo). I think you can avoid part of the problem with having multiple
mounts, one per user, but I haven't tried that.
ACL:s are not supported at all by smbfs, so having samba support won't
help you here.
One alternative solution to opening up for WINS would be to run a separate
ftp for internal use only (on a separate port and do proper firewalling on
that) and have the users get/put the files with ftp.
Or ssh/scp (or openssh's sftp-server).
/Urban
Return-Path: <Russ at me.msstate.edu>
Delivered-To: samba at samba.org
Received: from vector.engr.msstate.edu (mailhost.Engr.MsState.Edu
[130.18.17.44]) by lists.samba.org (Postfix) with ESMTP id F304145E2
for <samba at samba.org>; Tue, 12 Jun 2001 11:47:02 -0700 (PDT)
Received: by mailhost.Engr.MsState.Edu with Internet Mail Service
(5.5.2650.21) id <MM4SM50X>; Tue, 12 Jun 2001 13:46:27 -0500
Message-ID: <2CCEF0F0A124D511B6CB00902798CF5F128C5C at mailhost.Engr.MsStat
e.Edu>
From: Russ Ward <Russ at me.msstate.edu>
To: "'samba at samba.org'" <samba at samba.org>
Subject: Question....
Date: Tue, 12 Jun 2001 13:46:17 -0500
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2650.21)
Content-Type: text/plain; charset="us-ascii"
X-Converted-To-Plain-Text: from multipart/alternative by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Dear Samba Team,
My name is Russ Ward I work for Mississippi State University and am trying
to make life easier for students. The Dept that I work for now requires
students to buy laptops to use in class. Now they also decided that we are
going to give the stundets access to file storage and printers. Heres what
I want to do: I have a RH7.1 box setup that will do all the sharing running
samba 2.2.0. Right now I can access the server using a little vb program
that i wrote that just does the equilvant of net use....it works great on nt
and 2000. when I go to try it on 95/98/me i run into the problem that
windows will not pass on a different username then the one logged into the
computer. I don't want students to have to login to a pdc just for the off
chance they want to use the printer or save a file to the server. I would
rather have a app that will allow them to logon after booting their computer
to windows 95/98/me. any ideas on if there is an smb client for windows,
besides client for microsoft networks, or any idea on how i can get windows
to pass on another username besides the one logged in? Thanks
Russ Ward
**************************************************************
Russ Ward
Department Of Mechanical Engineering
Mississippi State University
Room 3 Carpenter Bldg.
662-325-7325
Russ at engr.msstate.edu
**************************************************************
Return-Path: <jstewart at rtl.org>
Delivered-To: samba at lists.samba.org
Received: from webserver.rtl.org (webserver2.rtl.org [63.94.12.188]) by
lists.samba.org (Postfix) with ESMTP id 7503B4D91 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 11:54:50 -0700 (PDT)
Received: from MIS3C.rtl.org ([63.106.163.130]) by webserver.rtl.org
(Switch-2.0.0/Switch-2.0.0) with ESMTP id f5CItNn25617; Tue, 12 Jun
2001 14:55:28 -0400
Message-Id: <5.0.2.1.0.20010612145548.00a9ae28 at 63.94.12.188>
X-Sender: jstewart at 63.94.12.188
X-Mailer: QUALCOMM Windows Eudora Version 5.0.2
Date: Tue, 12 Jun 2001 14:57:47 -0400
To: <alex at palmira.dntis.ro>
From: Jason Stewart <jstewart at rtl.org>
Subject: Re: Quick Question
Cc: samba at lists.samba.org
In-Reply-To: <Pine.LNX.4.21.0106122044140.10572-100000 at palmira.dntis.ro>
References: <5.0.2.1.0.20010612125208.00a9f710 at 63.94.12.188>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
That's not exactly what I meant, but thanks. I get another dialog box for
the samba share after the initial system logon that tells me that I have an
incorrect username or password. I know that this is not true, because it
will work when I re-enter the password.
Jason
At 08:45 PM 6/12/2001 +0300, alex at palmira.dntis.ro wrote:
> You can enable this feature by using TweakUI. You can find it by
>doing a search on GOOGLE.
>
>
>Alex Iruc
>
>On Tue, 12 Jun 2001, Jason Stewart wrote:
>
> > Greetings,
> >
> > Forgive me if this is off-topic, but how do I make a windows 2000
> client
> > automatically log on to the samba share (when I log on the the system) so
> > that I do not see the username:password dialog box when my I connect to
> the
> > share? My win9x clients do this automatically when the primary network
> > logon is set to microsoft network.
> >
> > Thanks,
> > Jason Stewart
> >
Return-Path: <rbek at gborocollege.edu>
Delivered-To: samba at lists.samba.org
Received: from calvin.gborocollege.edu (calvin.gborocollege.edu
[192.154.62.152]) by lists.samba.org (Postfix) with ESMTP id 7456B45F7
for <samba at lists.samba.org>; Tue, 12 Jun 2001 12:37:27 -0700 (PDT)
Received: from rbek.gborocollege.edu ([192.154.62.2]) by
calvin.gborocollege.edu (Netscape Messaging Server 3.6) with ESMTP id
337 for <samba at lists.samba.org>; Tue, 12 Jun 2001 15:40:43 -0400
Message-Id: <5.0.2.1.0.20010612152555.00a5dc50 at calvin.gborocollege.edu>
X-Sender: rbek at calvin.gborocollege.edu (Unverified)
X-Mailer: QUALCOMM Windows Eudora Version 5.0.2
Date: Tue, 12 Jun 2001 15:34:58 -0400
To: samba at lists.samba.org
From: Ryan Bek <rbek at gborocollege.edu>
Subject: Web Front-End
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hello all-
I've scoured the net & this list to find out information, but have come
across little.
Basically, I'm looking for a web front-end for Samba shares, so that folks
outside of the network can access content in their shares. Ideally, I'd
love to see a product that would allow file upload & download, directory
creation, etc. I've run across a package called "smb2www", but it seems a
bit "rough around the edges" and hasn't been updated since 1998 (from what
I can tell). Are there folks out there that have either built their own
web-SMB conduit (through something like PHP or Perl), or does anyone know
if commercial products exist on the Microsoft end for their NT products
that might work with Samba shares? Or, alternatively, what are folks doing
to allow those off their networks to gain access to Samba shares (other
than something like VPN)?
Thanks for any help!
-Ryan-
Ryan Bek
Network Administrator
Office of Information Technology, Greensboro College
Phone - (336) 272-7102 x366
FAX - (336) 271-6634
rbek at gborocollege.edu
Return-Path: <dahouet at gmx.net>
Delivered-To: samba at lists.samba.org
Received: from mail.gmx.net (pop.gmx.net [194.221.183.20]) by
lists.samba.org (Postfix) with SMTP id F03F04DD4 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 13:15:15 -0700 (PDT)
Received: (qmail 30095 invoked by uid 0); 12 Jun 2001 20:14:53 -0000
Received: from adsl-2-47.adsl.easynet.fr (HELO mail.gmx.de)
(212.11.31.47) by mail.gmx.net (mp002-rz3) with SMTP; 12 Jun 2001
20:14:53 -0000
Message-ID: <200106122213560175.0BAFCDBC at mail.gmx.de>
X-Mailer: Calypso Version 3.20.02.00 (4)
Date: Tue, 12 Jun 2001 22:13:56 +0200
From: "linux" <dahouet at gmx.net>
To: samba at lists.samba.org
Subject: french PDC
Mime-Version: 1.0
Content-Type: text/plain; charset="WINDOWS-1250"
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
I'm about to make my server a PDC.
I can't access file with accentuated characters via samba
i can see the files but "file not found" in the samba log
however i have in my smb.conf
client code page = 850
character set = ISO8859-1
so i can't load a profile because there's some accentuated characters
(Start Menu => Menu Dimarrer)
any ideas?
thanks for answers or links
@++
nico
Return-Path: <coreyu at sympatico.ca>
Delivered-To: samba at lists.samba.org
Received: from mx1.q9.com (mx1.q9.com [216.220.35.254]) by
lists.samba.org (Postfix) with ESMTP id 1888744DA for
<samba at lists.samba.org>; Tue, 12 Jun 2001 13:20:37 -0700 (PDT)
Received: from cheetah.zoo.q9networks.com (225.35.220-216.q9.net
[216.220.35.225]) by mx1.q9.com (Postfix) with ESMTP id 97EC62AF9E for
<samba at lists.samba.org>; Tue, 12 Jun 2001 16:20:15 -0400 (EDT)
Received: from barracuda ([10.220.34.150]) by cheetah.zoo.q9networks.com
with SMTP (Microsoft Exchange Internet Mail Service Version
5.5.2650.21) id MTRV36HJ; Tue, 12 Jun 2001 16:20:15 -0400
From: "Corey" <coreyu at sympatico.ca>
To: <samba at lists.samba.org>
Subject: Constant Log Error.
Date: Tue, 12 Jun 2001 16:20:13 -0400
Message-ID: <05924A4A9DEDAD46A21EE3C8C64B090D1D1C58 at cheetah.zoo.q9networ
ks.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0)
X-Converted-To-Plain-Text: from multipart/alternative by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I constantly get this error in my log file and it offers no help to me
really, anyone have any ideas what this could be?
#
[2001/06/12 14:41:27, 1] smbd/reply.c:reply_sesssetup_and_X(990)
Username is invalid on this system
#
I have a feeling it has something to do with password sync but can't figure
out what.
Corey
Return-Path: <edror at panasas.com>
Delivered-To: samba at lists.samba.org
Received: from PIKES.panasas.com (gw2.panasas.com [65.194.124.178]) by
lists.samba.org (Postfix) with ESMTP id 63117485D for
<samba at lists.samba.org>; Tue, 12 Jun 2001 13:28:41 -0700 (PDT)
Received: from GORSUCH (dynamic-w-218.panasas.com [172.17.132.218]) by
PIKES.panasas.com with SMTP (Microsoft Exchange Internet Mail Service
Version 5.5.2653.13) id MZLWH9K1; Tue, 12 Jun 2001 16:28:18 -0400
Reply-To: <edror at panasas.com>
From: "Ephi Dror" <edror at panasas.com>
To: "Samba (E-mail)" <samba at lists.samba.org>
Subject: Oplock support for BSD?
Date: Tue, 12 Jun 2001 16:28:16 -0400
Message-ID: <000401c0f37e$37035cd0$da8411ac at GORSUCH>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi All,
Does anyone know if there is a work in progress to support Oplock on any of
the BSD based OSs (FreeBSD, OpenBSD, NetBSD, etc.) besides Linux and Irix.
If yes, I would like to know if I can help. If not, is there any technical
problems to support it.
Thanks a lot,
Ephi
Return-Path: <gazipasa1 at e-kolay.net>
Delivered-To: samba at samba.org
Received: from e-kolay.net (unknown [217.131.67.220]) by lists.samba.org
(Postfix) with SMTP id D89954E0C for <samba at samba.org>; Tue, 12 Jun
2001 13:49:48 -0700 (PDT)
From: "Hotel Gazipasa" <gazipasa1 at e-kolay.net>
To: <samba at samba.org>
Subject: Tatilinizi Hotel Gazipasa'da Gecirmeye Ne Dersiniz?
Mime-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"
Date: Wed, 6 Jun 2001 23:49:55 +0300
Content-Transfer-Encoding: 7bit
Message-Id: <20010612204948.D89954E0C at lists.samba.org>
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Sayin Internet Kullanicisi,
Bu yaz tatile cikmayi ve tatilinizi Antalya-Side'de gecirmeyi dusunurseniz,
sizi Hotel Gazipasa'ya devet ediyoruz.
Otelimiz luks ve konforludur. Klimali, mini-barli, balkonlu odalarimiz;
cocuk bahcesi, yuzme havuzu, otopark ve 5 kisinin rahatlikla kalabilecegi
klimali, super luks apart dairelerimizle hizmetinizdeyiz.
Detay bilgi icin asagidaki adrese e-mail gonderebilir ya da telefon
acabilirsiniz.
Ilginiz icin tesekkur eder, islerinizde basarilar dileriz.
HOTEL GAZIPASHA
Rifat Yildiz (General Manager)
Yali Mahallesi, Side - Manavgat - ANTALYA - TURKEY
PTT: PK 52 07330 Side - Manavgat - ANTALYA - TURKEY
TEL : 0-242-753 13 80 (PBX) - 753 36 23 - 753 57 57
FAX : 0-242-753 29 69 CEP: 0 (532) 292 53 90
E-MAIL: rifyildiz at e-kolay.net
Bu tanitim iletisinden dolayi size rahatsizlik vermissek ozur dileriz.
Bu tur iletileri almak istemiyorsaniz, gazipasa1 at e-kolay.net adresine
"Remove" komutlu bir ileti gonderebilirsiniz.
Return-Path: <yhuerta at msi.umn.edu>
Delivered-To: samba at lists.samba.org
Received: from mail.msi.umn.edu (mail.msi.umn.edu [128.101.31.10]) by
lists.samba.org (Postfix) with ESMTP id E7B954443 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 13:58:00 -0700 (PDT)
Received: from blizzard.msi.umn.edu (blizzard.msi.umn.edu
[128.101.31.37]) by mail.msi.umn.edu (8.9.3/8.9.3) with ESMTP id
PAA2247414; Tue, 12 Jun 2001 15:57:39 -0500 (CDT)
Date: Tue, 12 Jun 2001 15:57:38 -0500 (CDT)
From: Yectli Huerta <yhuerta at msi.umn.edu>
To: <samba at lists.samba.org>, <stunnel-users at mirt.net>
Subject: stunnel and samba w/ssl
Message-ID: <Pine.A41.4.33.0106111544001.17108-100000 at blizzard.msi.umn.e
du>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
i've been trying to get samba and stunnel to work and i am getting the
following messages (see below). it attempts to establish a connection,
but it does not get too far. it complaints that it is an unknown protocol.
thanks, any help will be appreciated...
yectli
LOG5[1159436:65536]: Using 'sfs.139' as tcpwrapper service name
LOG7[1159436:65536]: Snagged 64 random bytes from /home/msib/yhuerta/.rnd
LOG7[1159436:65536]: Wrote 1024 new random bytes to /home/msib/yhuerta/.rnd
LOG7[1159436:65536]: RAND_status claims sufficient entropy for the PRNG
LOG6[1159436:65536]: PRNG seeded successfully
LOG7[1159436:65536]: Certificate: /usr/local/openssl/certs/stunnel.pem
LOG5[1159436:65536]: stunnel 3.14 on mips-sgi-irix6.5 PTHREAD
LOG7[1159436:65536]: No pid file being created.
LOG7[1159436:65536]: sfs.139 bound to xxx.xxx.xxx.xxx:139
LOG7[1159436:65537]: sfs.139 started
LOG5[1159436:65537]: sfs.139 connected from xxx.xxx.xxx.xxx:1350
LOG7[1159436:65537]: sfs.139 connecting xxx.xxx.xxx.xxx:139
LOG7[1159436:65537]: Remote host connected
LOG7[1159436:65537]: before/accept initialization
LOG7[1159436:65537]: before/accept initialization
LOG7[1159436:65537]: SSLv2/v3 read client hello A
LOG3[1159436:65537]: SSL_accept: error:140760FC:SSL
routines:SSL23_GET_CLIENT_HELLO:unknown protocol
LOG7[1159436:65537]: sfs.139 finished (1 left)
LOG7[1159436:65538]: sfs.139 started
LOG3[1159436:65538]: getpeerbyname: Invalid argument (22)
LOG3[1159436:65538]: linger (local): Invalid argument (22)
LOG7[1159436:65538]: sfs.139 finished (0 left)
Return-Path: <tpot at samba.org>
Delivered-To: samba at samba.org
Received: by lists.samba.org (Postfix, from userid 1007) id 653944E0F;
Tue, 12 Jun 2001 14:00:52 -0700 (PDT)
From: Tim Potter <tpot at valinux.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Message-ID: <15142.33432.715298.646292 at frungy.org>
Date: Wed, 13 Jun 2001 06:59:04 +1000 (EST)
To: "Heike Navarro" <HeikeNavarro at gmx.de>
Cc: <samba at samba.org>
Subject: Re: Samba 2.07 for HPUX
In-Reply-To: <000d01c0f346$35a770c0$827832d9 at navarro>
References: <000d01c0f346$35a770c0$827832d9 at navarro>
X-Mailer: VM 6.75 under Emacs 20.7.2
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Heike Navarro writes:
> Hi,
> I need a samba version 2.07 precompiled fpr HPUX 10.20.
> Where can I find it?
ftp://ftp.samba.org/pub/samba/Binary_Packages/hp/
Tim.
Return-Path: <tpot at samba.org>
Delivered-To: samba at samba.org
Received: by lists.samba.org (Postfix, from userid 1007) id E53BE4E13;
Tue, 12 Jun 2001 14:00:52 -0700 (PDT)
From: Tim Potter <tpot at valinux.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Message-ID: <15142.33494.778138.996754 at frungy.org>
Date: Wed, 13 Jun 2001 07:00:06 +1000 (EST)
To: "MCCALL,DON (HP-USA,ex1)" <don_mccall at hp.com>
Cc: "'samba at samba.org'" <samba at samba.org>
Subject: Re: Binary packages for 2.0.9 and 2.2.0 on 10.20 and 11.0 HP-UX
In-Reply-To: <079FD72E42C9D311B854009027650E6F04050AB8 at xatl02.atl.hp.com
>
References: <079FD72E42C9D311B854009027650E6F04050AB8 at xatl02.atl.hp.com>
X-Mailer: VM 6.75 under Emacs 20.7.2
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
MCCALL,DON (HP-USA,ex1) writes:
> Hi folks;
> I've been working with the HP-UX lab on getting us
> involved in submitting binary packages for the latest
> Samba (2.0.9, and 2.2.0) for HP-UX systems. What's the
> proceedure to submit these once they are ready?
Send me an email where they can be downloaded and I'll put them
up for binary ftp. BTW there is a samba-binaries list where this
sort of stuff can be posted.
Tim.
Return-Path: <yogesh at ram.amd.com>
Delivered-To: samba at lists.samba.org
Received: from amdext.amd.com (amdext.amd.com [139.95.251.1]) by
lists.samba.org (Postfix) with ESMTP id 3A54E4E2F for
<samba at lists.samba.org>; Tue, 12 Jun 2001 14:06:18 -0700 (PDT)
Received: from ssvlgs01.amd.com (ssvlgs01.amd.com [139.95.250.16]) by
amdext.amd.com (8.9.3/8.9.3/AMD) with SMTP id OAA03706 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 14:05:56 -0700 (PDT)
Received: from 139.95.250.1 by ssvlgs01.amd.com with ESMTP (Tumbleweed
MMS SMTP Relay (MMS v4.7)); Tue, 12 Jun 2001 14:05:56 -0700
X-Server-Uuid: 02753650-11b0-11d5-bbc5-00508bf987eb
Received: from carmel.amd.com (carmel.amd.com [139.95.74.141]) by
amdint.amd.com (8.9.3/8.9.3/AMD) with ESMTP id OAA23556 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 14:05:55 -0700 (PDT)
Received: from ram.amd.com (ram [139.95.71.178]) by carmel.amd.com (
8.9.3/8.9.3) with ESMTP id OAA03073 for <samba at lists.samba.org>; Tue,
12 Jun 2001 14:05:54 -0700 (PDT)
Received: from localhost (yogesh at localhost) by ram.amd.com (8.8.8/8.8.8)
with ESMTP id OAA10110 for <samba at lists.samba.org>; Tue, 12 Jun 2001
14:05:54 -0700 (PDT)
Date: Tue, 12 Jun 2001 14:05:54 -0700 (PDT)
From: "Yogesh Chaudhary" <yogesh at ram.amd.com>
To: samba at lists.samba.org
Subject: Two samba servers up at the same time in same domain
Message-ID: <Pine.GSO.4.33.0106121403130.9928-100000 at ram.amd.com>
MIME-Version: 1.0
X-WSS-ID: 17385BBE114102-01-01
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi All,
I had problems when I started two samba servers on unix systems at a
time.I was able to map from the new samba server but not with the old
one.
Both the servers are in same domain.(workgroup).Is it something to do
with netBios name ?
Can somebody give me an inout on this...
Thankx in advance
Yogesh
Advanced Micro Devices
Return-Path: <marion.haines at countygovt.brevard.fl.us>
Delivered-To: samba at lists.samba.org
Received: from gc2a-hplh4.countygovt.brevard.fl.us
(mail.countygovt.brevard.fl.us [205.153.146.134]) by lists.samba.org
(Postfix) with SMTP id 96D504E2F for <samba at lists.samba.org>; Tue, 12
Jun 2001 14:06:37 -0700 (PDT)
Received: by gc2a-hplh4.countygovt.brevard.fl.us with VINES-ISMTP; Tue,
12 Jun 2001 17:05:25 -0400
Date: Tue, 12 Jun 2001 17:10:26 -0400
Message-ID: <vines.MVC9+3Jc7vA at gc2a-hplh4.countygovt.brevard.fl.us>
To: <samba at lists.samba.org>
From: <marion.haines at countygovt.brevard.fl.us>(Marion Haines)
Reply-To: <marion.haines at countygovt.brevard.fl.us>
Subject: RE: Question....
X-Incognito-SN: 28896
X-Incognito-Version: 5.1.0.78
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I'm new to Samba also. Hopefully I can help with part of your questions.
I'm running Win95 and when it boots up with the MS login, just have the user change whatever name is showing to their own and then enter the appropriate password.
For example, on my PC I test with my name (marion) and password and a test user named "test1" and it's password. Just enter the right name and the MS login and it will work with any user (i.e. it doesn't have to be the computer name) as long as the Workgroup, etc, is correct.
Marion D. Haines
marion.haines at countygovt.brevard.fl.us
Network Administrator
Board of County Commissioners
Brevard County, Florida
=============================
-----Original Message-----
From: "Russ Ward" <Russ at me.msstate.edu>
Sent: Tuesday, June 12, 2001 2:46 PM
To: iSMTP at GC2A@Servers["'samba at samba.org'" <samba at samba.org>]
Subject: Question....
Dear Samba Team,
My name is Russ Ward I work for Mississippi State University and am trying
to make life easier for students. The Dept that I work for now requires
students to buy laptops to use in class. Now they also decided that we are
going to give the stundets access to file storage and printers. Heres what
I want to do: I have a RH7.1 box setup that will do all the sharing running
samba 2.2.0. Right now I can access the server using a little vb program
that i wrote that just does the equilvant of net use....it works great on nt
and 2000. when I go to try it on 95/98/me i run into the problem that
windows will not pass on a different username then the one logged into the
computer. I don't want students to have to login to a pdc just for the off
chance they want to use the printer or save a file to the server. I would
rather have a app that will allow them to logon after booting their computer
to windows 95/98/me. any ideas on if there is an smb client for windows,
besides client for microsoft networks, or any idea on how i can get windows
to pass on another username besides the one logged in? Thanks
Russ Ward
**************************************************************
Russ Ward
Department Of Mechanical Engineering
Mississippi State University
Room 3 Carpenter Bldg.
662-325-7325
Russ at engr.msstate.edu
**************************************************************
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <tpot at samba.org>
Delivered-To: samba at lists.samba.org
Received: by lists.samba.org (Postfix, from userid 1007) id 4A6A34E37;
Tue, 12 Jun 2001 14:11:08 -0700 (PDT)
From: Tim Potter <tpot at valinux.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Message-ID: <15142.34108.14691.593783 at frungy.org>
Date: Wed, 13 Jun 2001 07:10:20 +1000 (EST)
To: Jason Stewart <jstewart at rtl.org>
Cc: samba at lists.samba.org
Subject: Re: Quick Question
In-Reply-To: <5.0.2.1.0.20010612125208.00a9f710 at 63.94.12.188>
References: <5.0.2.1.0.20010612125208.00a9f710 at 63.94.12.188>
X-Mailer: VM 6.75 under Emacs 20.7.2
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Jason Stewart writes:
> Greetings,
>
> Forgive me if this is off-topic, but how do I make a
> windows 2000 client automatically log on to the samba share
> (when I log on the the system) so that I do not see the
> username:password dialog box when my I connect to the share? My
> win9x clients do this automatically when the primary network
> logon is set to microsoft network.
Make the samba server a domain member usually does the trick.
Tim.
>
> Thanks,
> Jason Stewart
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <jasonf at citynet.net>
Delivered-To: samba at lists.samba.org
Received: from tx.citynet.net (tx.citynet.net [208.154.179.12]) by
lists.samba.org (Postfix) with ESMTP id C917345CD for
<samba at lists.samba.org>; Tue, 12 Jun 2001 14:28:27 -0700 (PDT)
Received: from Neptune (63-145-134-56.citynet.net [63.145.134.56]) by
tx.citynet.net (8.11.3/8.11.3=Outbound) with SMTP id f5CLRgF02122 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 17:27:42 -0400
Message-ID: <002701c0f386$bba1bc40$0200000a at Neptune>
From: "Jason Francis" <jasonf at citynet.net>
To: <samba at lists.samba.org>
Subject: Samba 2.0.7 Workgroup
Date: Tue, 12 Jun 2001 17:29:15 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.00.2919.6700
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I'm trying to setup Samba so I can share files between my Win2k box and my
FreeBSD box, but I can't seem to get it to work. I'm using a workgroup
instead of a domain.
Here's smb.conf:
[dev]
comment = Unix Development
path = /usr/dev
read only = yes
guest ok = yes
browseable = yes
[web]
comment = Local HTTP
path = /usr/local/boa/htdocs
read only = yes
guest ok = yes
browseable = yes
[mp3]
comment = mp3 shares
path = /usr/home/jason/mp3
read only = no
guest ok = yes
browseable = yes
And here's what happens when I do 'smbclient -L saturn.ods.org (the freebsd
box)
[global]
workgroup = MWAY
preferred master = yes
max log size = 50
hosts allow = 10.0.0.1 10.0.0.2 127.
log file = /var/log/log.%m
security = share
socket options = TCP_NODELAY
os level = 80
domain master = yes
[dev]
comment = Unix Development
path = /usr/dev
read only = yes
guest ok = yes
browseable = yes
[web]
comment = Local HTTP
path = /usr/local/boa/htdocs
read only = yes
guest ok = yes
browseable = yes
[mp3]
comment = mp3 shares
path = /usr/home/jason/mp3
read only = no
guest ok = yes
browseable = yes
This is what happens when I do 'smbclient -L saturn.ods.org' (The FreeBSD
box)
saturn# smbclient -L saturn.ods.org
added interface ip=10.0.0.1 bcast=10.0.0.255 nmask=255.255.255.0
added interface ip=63.145.134.130 bcast=63.145.134.255 nmask=255.255.255.0
Password:
Domain=[MWAY] OS=[Unix] Server=[Samba 2.0.7]
Sharename Type Comment
--------- ---- -------
dev Disk Unix Development
web Disk Local HTTP
mp3 Disk mp3 shares
IPC$ IPC IPC Service (Samba 2.0.7)
Server Comment
--------- -------
Workgroup Master
--------- -------
saturn#
As you can see, workgroup is blank. I can browse Samba shares from the
FreeBSD machine,
and I can browse the Windows 2000 machine from itself, but I can't get
either machine to communicate with the other.
Return-Path: <AWilisch at Shadowrealms.cc>
Delivered-To: samba at lists.samba.org
Received: from voyager (cvg-65-27-239-31.cinci.rr.com [65.27.239.31]) by
lists.samba.org (Postfix) with ESMTP id 8FF8D468C for
<samba at lists.samba.org>; Tue, 12 Jun 2001 14:41:28 -0700 (PDT)
Received: from voyager ([127.0.0.1]) by voyager with Microsoft
SMTPSVC(5.0.2195.2966); Tue, 12 Jun 2001 17:39:41 -0400
Reply-To: <AWilisch at Shadowrealms.cc>
From: "Aric C. Wilisch" <AWilisch at Shadowrealms.cc>
To: <samba at lists.samba.org>
Subject: Samba 2.2 and Swat
Date: Tue, 12 Jun 2001 17:39:39 -0400
Message-ID: <000101c0f388$2fc95780$6401010a at voyager>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0)
X-OriginalArrivalTime: 12 Jun 2001 21:39:41.0061 (UTC)
FILETIME=[2FDEDB50:01C0F388]
X-Converted-To-Plain-Text: from multipart/related by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was multipart/alternative
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I recently downloaded the latest version of Samba (ver 2.2) to upgrade the
version that comes with Red Hat 7.1 (I think ti's ver. 2.0.7). The problem
comes when the upgrade tells me that the version of Swat that's installed
requires Samba 2.0.7. Does anyone know where I can find a updated version of
Swat that will work with Samba 2.2
Thanks
----------------------------------------- End
Transmission -----------------------------------------
Aric C. Wilisch
email: AWilisch at Shadowrealms.cc
[demime 0.98b removed an attachment of type image/bmp which had a name of MCP_c.bmp]
Return-Path: <jasonf at citynet.net>
Delivered-To: samba at lists.samba.org
Received: from tx.citynet.net (tx.citynet.net [208.154.179.12]) by
lists.samba.org (Postfix) with ESMTP id 406D74A4F for
<samba at lists.samba.org>; Tue, 12 Jun 2001 15:38:13 -0700 (PDT)
Received: from Neptune (63-145-134-191.citynet.net [63.145.134.191]) by
tx.citynet.net (8.11.3/8.11.3=Outbound) with SMTP id f5CMbRF07759 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 18:37:28 -0400
Message-ID: <003501c0f390$7bc9d940$0200000a at Neptune>
From: "Jason Francis" <jasonf at citynet.net>
To: <samba at lists.samba.org>
Subject: Samba 2.0.7 Workgroup Update---
Date: Tue, 12 Jun 2001 18:39:03 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.00.2919.6700
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
It somehow just started working :)
It kept dying so I restarted, and it still wouldn't function, so I connected
to my ISP and then ran the startup script and things are working perfectly.
I don't have a domain name, and I'm not running a DNS server. Is there any
way I can make it so that my shares are always accessible?
Return-Path: <POSTHUMABJ at MCTSSA.USMC.MIL>
Delivered-To: samba at samba.org
Received: from gate4.cpp.usmc.mil (unknown [192.156.5.37]) by
lists.samba.org (Postfix) with ESMTP id 3811E461A for
<samba at samba.org>; Tue, 12 Jun 2001 16:14:01 -0700 (PDT)
Received: by gate4.cpp.usmc.mil; id XAA08094; Tue, 12 Jun 2001 23:13:15
GMT
Received: from unknown(143.211.1.150) by gate4.cpp.usmc.mil via smap
(V5.0) id xma007206; Tue, 12 Jun 01 23:12:36 GMT
Received: from mctssa01.mctssa.usmc.mil (ex.mctssa.usmc.mil
[143.211.10.11]) by dns1.mctssa.usmc.mil (8.6.12/8.6.667) with ESMTP
id PAA06161 for <samba at samba.org>; Tue, 12 Jun 2001 15:59:06 -0700
Received: by ex.mctssa.usmc.mil with Internet Mail Service (5.5.2653.19)
id <MZA3KWCS>; Tue, 12 Jun 2001 16:11:10 -0700
Message-ID: <5F7587961057D211ABE9004095102F780195ACC6 at ex.mctssa.usmc.mil
>
From: Posthuma Cpl Benjamin J <POSTHUMABJ at mctssa.usmc.mil>
To: "'samba at samba.org'" <samba at samba.org>
Subject: Samba troubles with Windows 2000
Date: Tue, 12 Jun 2001 16:11:09 -0700
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
I have had samba up and running for the past 6 months between a Sparc20
running SunOS 4.1.1 and several Windows NT 4.0 machines. I had one NT
server, 4 NT workstations and the Sparc20 on one domain. It has worked
perfectly the entire time. However, I just performed a upgrade to all my NT
machines, replacing them with much faster computers that had Windows 2000 on
them. The network is back up (with all different IP addresses) and running
fine, save for the fact that Samba will no longer work. FTP still works,
and it still shows up on my network. When i look at the samba log files on
the Sparc machine, I can see that every day it tries to connect but comes
back with an error that states: "Could not find user 'administrator' in UNIX
password database." How do i add the user to the database? Or, perhaps, is
there something else I need to do? Any advice you can give me would be
great. Thanks in advance.
Ben Posthuma
Mr. Benjamin J. Posthuma
MC Network Design Facility
MCTSSA Camp Pendleton, CA
Comm: (760)-725-2796
DSN: 365-2796
Return-Path: <jasonf at citynet.net>
Delivered-To: samba at lists.samba.org
Received: from tx.citynet.net (tx.citynet.net [208.154.179.12]) by
lists.samba.org (Postfix) with ESMTP id 1B5174E3E for
<samba at lists.samba.org>; Tue, 12 Jun 2001 16:20:18 -0700 (PDT)
Received: from Neptune (63-145-134-191.citynet.net [63.145.134.191]) by
tx.citynet.net (8.11.3/8.11.3=Outbound) with SMTP id f5CNJWF10625 for
<samba at lists.samba.org>; Tue, 12 Jun 2001 19:19:32 -0400
Message-ID: <003d01c0f396$5c868e60$0200000a at Neptune>
From: "Jason Francis" <jasonf at citynet.net>
To: <samba at lists.samba.org>
References: <5F7587961057D211ABE9004095102F780195ACC6 at ex.mctssa.usmc.mil
>
Subject: Re: Samba troubles with Windows 2000
Date: Tue, 12 Jun 2001 19:21:07 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.00.2919.6700
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Your Win2k machine is trying to log you in as administrator. Go to Control
Panel -> Network and Dial-Up Connections, and in the the left hand pane
there will be some things you can use to get it setup.
Return-Path: <louisg00 at bellsouth.net>
Delivered-To: samba at lists.samba.org
Received: from imf05bis.bellsouth.net (mail205.mail.bellsouth.net
[205.152.58.145]) by lists.samba.org (Postfix) with ESMTP id 91DAC4252
for <samba at lists.samba.org>; Tue, 12 Jun 2001 19:33:15 -0700 (PDT)
Received: from tiger ([208.63.199.67]) by imf05bis.bellsouth.net
(InterMail vM.5.01.01.01 201-252-104) with ESMTP id
<20010613023341.UMKW7203.imf05bis.bellsouth.net at tiger> for
<samba at lists.samba.org>; Tue, 12 Jun 2001 22:33:41 -0400
Subject: samba and windows printing
From: Louis Garcia <louisg00 at bellsouth.net>
To: samba at lists.samba.org
In-Reply-To: <991847746.2028.1.camel at tiger>
References: <3B1DE414.13339.140F8C at localhost>
<3B1E279F.26037.11BE456 at localhost> <991847746.2028.1.camel at tiger>
Content-Type: text/plain
X-Mailer: Evolution/0.10 (Preview Release)
Date: 12 Jun 2001 10:32:22 -0400
Message-Id: <992356343.7180.0.camel at tiger>
Mime-Version: 1.0
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
When printing from a Windows 98 machine their is always an extra blank
page printed at the end of every print job. I've been reading the HOWTOs
and it seems to happen with Windows 95 and 98 only because the
Postscript is malformed. But I'm using the windows print driver and
printing to a raw device on linux.
Is their anyway to fix this???
I'm running rh6.2 with samba2.0.8
Thanks
Return-Path: <jbenedet at unm.edu>
Delivered-To: samba at lists.samba.org
Received: from linux06.unm.edu (linux06.unm.edu [129.24.15.38]) by
lists.samba.org (Postfix) with SMTP id 0F269474C for
<samba at lists.samba.org>; Tue, 12 Jun 2001 19:48:19 -0700 (PDT)
Received: (qmail 14792 invoked by uid 124); 13 Jun 2001 02:47:56 -0000
Received: from jbenedet at unm.edu by linux06.unm.edu with
qmail-scanner-0.96 (. Clean. Processed in 0.045491 secs); 13 Jun 2001
02:47:56 -0000
Received: from bldg87-0053.unm.edu (129.24.204.111) by linux06.unm.edu
with SMTP; 13 Jun 2001 02:47:56 -0000
Date: Tue, 12 Jun 2001 20:46:35 -0600
From: John Benedetto <jbenedet at unm.edu>
To: fmaresca at monssa.com.ar, samba at lists.samba.org
Subject: Re: Passwd change via SWAT
Message-ID: <241350614.992378795 at bldg87-0053.unm.edu>
In-Reply-To: <3B2619B9.9557.6F789 at localhost>
Originator-Info: login-token=Mulberry:018j/wfFyhVepyo1r7CfJc7jWRYvd7bTil
Zw==
X-Mailer: Mulberry/2.0.5 (Win32)
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
--On Tuesday, June 12, 2001 1:31 PM -0300 fmaresca at monssa.com.ar wrote:
> I got 2 hosts running samba. One is over a RH6.2 and it
> works fine; the second machine is running samba over Debian
> Potato and it was installed to replaces the other (old) machine.
> The problem is that once samba is all configured and runs ok in
> this new amchine, attempts to login in swat as an non-root user
> fails.
> this never was happens in the old machine, and users in the
> network was able to change their passwd using swat. This problem
> is relative to samba, swat or debian? Any ideas?
It's my understanding that ONLY root can run SWAT. If that *is* true, what
was done to Samba on the old machine to change that?
- john
Return-Path: <mcrogerm at stjohn.ac.th>
Delivered-To: samba at lists.samba.org
Received: from stjohn.stjohn.ac.th (stjohn.stjohn.ac.th [202.21.144.1])
by lists.samba.org (Postfix) with ESMTP id B4DFB44DA for
<samba at lists.samba.org>; Tue, 12 Jun 2001 22:01:14 -0700 (PDT)
Received: from tulip ([203.151.134.104]) by stjohn.stjohn.ac.th
(8.9.3+Sun/8.9.3) with SMTP id LAA16955 for <samba at lists.samba.org>;
Wed, 13 Jun 2001 11:56:31 +0700 (ICT)
Message-Id: <3.0.6.32.20010613115919.007bd6b0 at stjohn.stjohn.ac.th>
X-Sender: mcrogerm at stjohn.stjohn.ac.th
X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32)
Date: Wed, 13 Jun 2001 11:59:19 +0700
To: samba at lists.samba.org
From: Roger Merritt <mcrogerm at stjohn.ac.th>
Subject: Samba can't change to my home directory
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
We had a power failure a couple of weeks ago. Luckily my FreeBSD file
systems weren't damaged, but my Win95 machine was -- for some reason, not
only the Windows Registry, but also many of the configuration files for
applications (I know, there aren't supposed to be any anymore) were damaged.
Since then, even though I reinstalled Windows 95 and have re-installed many
of the applications, I keep getting messages that my share cannot be
located, or access is denied.
I am running Samba 2.0.7 on FreeBSD 4.3-STABLE (compiled on 1 May). In the
logs, the log for this particular machine keeps recording, "Can't change
directory to /home/xxxx (Permission denied)." Last week I was getting a
message that indicated Samba was trying to connect me to my share not using
my username but as pcguest!
No one else on the network is having a problem with this (thank goodness).
Also, mine is the only share with a password, but security is set to SHARE,
and I'm loging in on the Win95 machine with the same username and password
that I use on the server.
Any suggestions on how to begin troubleshooting this?
Return-Path: <nailed at videotron.ca>
Delivered-To: samba at lists.samba.org
Received: from VL-MS-MR002.sc1.videotron.ca (relais.videotron.ca
[24.201.245.36]) by lists.samba.org (Postfix) with ESMTP id 90CD64594
for <samba at lists.samba.org>; Tue, 12 Jun 2001 22:24:52 -0700 (PDT)
Received: from alain ([24.201.55.103]) by VL-MS-MR002.sc1.videotron.ca
(Netscape Messaging Server 4.15) with SMTP id GEUSCT03.DEH; Wed, 13
Jun 2001 01:24:29 -0400
Content-Type: text/plain; charset="iso-8859-1"
From: Alain Toussaint <nailed at videotron.ca>
To: Ryan Bek <rbek at gborocollege.edu>, samba at lists.samba.org
Subject: Re: Web Front-End
Date: Wed, 13 Jun 2001 01:24:28 -0400
X-Mailer: KMail [version 1.2]
References: <5.0.2.1.0.20010612152555.00a5dc50 at calvin.gborocollege.edu>
In-Reply-To: <5.0.2.1.0.20010612152555.00a5dc50 at calvin.gborocollege.edu>
MIME-Version: 1.0
Message-Id: <01061301242800.01110 at alain>
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
> Basically, I'm looking for a web front-end for Samba shares, so that
> folks outside of the network can access content in their shares.
i've looked a bit and found a possible solution,you can have an
Apache+Webdav+mod_auth_samba server,here's the url:
Apache: http://httpd.apache.org/
mod_dav (i hope all your user are running MSIE or there's a way for
them to use dav): http://www.webdav.org/mod_dav/
mod_auth_samba: http://sourceforge.net/projects/modauthsamba/
Good luck.
Alain
Return-Path: <oliver at samera.com.py>
Delivered-To: samba at lists.samba.org
Received: from Polaris.Pla.net.PY (polaris.pla.net.py [216.250.196.10])
by lists.samba.org (Postfix) with ESMTP id C8B37461A for
<samba at lists.samba.org>; Tue, 12 Jun 2001 22:46:48 -0700 (PDT)
Received: (from uucp at localhost) by Polaris.Pla.net.PY (8.11.2/8.11.2)
with UUCP id f5CLmLZ25004; Wed, 13 Jun 2001 01:48:21 +0400
Received: from samera.com.py (sojourner.samera.com [192.168.1.1]) by
samera.com (8.9.3/8.9.3) with ESMTP id BAA16458; Wed, 13 Jun 2001
01:43:11 -0400
Message-ID: <3B26FD6E.1070705 at samera.com.py>
Date: Wed, 13 Jun 2001 01:43:10 -0400
From: "Oliver Schulze L." <oliver at samera.com.py>
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.1)
Gecko/20010607
X-Accept-Language: en-us
MIME-Version: 1.0
To: AWilisch at Shadowrealms.cc
Cc: samba at lists.samba.org
Subject: Re: Samba 2.2 and Swat
References: <000101c0f388$2fc95780$6401010a at voyager>
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Don't do an upgrade.
Do this:
$ cp /etc/smb.cong /etc/smb.conf.bak
$ rpm -ev samba samba-client samba-common
$ rpm -ivh samba*2.2.0*rpm
$ mkdir /usr/share/samba
$ mv /usr/share/swat /usr/share/samba
Sorry for the quick answer, I need to sleep :-)
Oliver
Aric C. Wilisch wrote:
>I recently downloaded the latest version of Samba (ver 2.2) to upgrade the
>version that comes with Red Hat 7.1 (I think ti's ver. 2.0.7). The problem
>comes when the upgrade tells me that the version of Swat that's installed
>requires Samba 2.0.7. Does anyone know where I can find a updated version of
>Swat that will work with Samba 2.2
>
>Thanks
>----------------------------------------- End
>Transmission -----------------------------------------
>
>Aric C. Wilisch
>email: AWilisch at Shadowrealms.cc
>
>[demime 0.98b removed an attachment of type image/bmp which had a name of MCP_c.bmp]
>
Return-Path: <raylutz at cognisys.com>
Delivered-To: samba at lists.samba.org
Received: from mta5.snfc21.pbi.net (mta5.snfc21.pbi.net [206.13.28.241])
by lists.samba.org (Postfix) with ESMTP id AEFF4454C for
<samba at lists.samba.org>; Tue, 12 Jun 2001 23:03:21 -0700 (PDT)
Received: from lutzray.cognisys.com ([64.165.17.15]) by
mta5.snfc21.pbi.net (Sun Internet Mail Server
sims.3.5.2000.01.05.12.18.p9) with ESMTP id
<0GEU005DYU4T2F at mta5.snfc21.pbi.net> for samba at lists.samba.org; Tue,
12 Jun 2001 23:02:54 -0700 (PDT)
Date: Tue, 12 Jun 2001 22:52:49 -0700
From: Raymond Lutz <raylutz at cognisys.com>
Subject: What is "unix realname" in Samba 2.2.0
X-Sender: lutzray at postoffice.pacbell.net
To: samba at lists.samba.org
Message-id: <5.1.0.14.2.20010612225128.02a7f090 at postoffice.pacbell.net>
MIME-version: 1.0
X-Mailer: QUALCOMM Windows Eudora Version 5.1
Content-type: text/plain; charset="us-ascii"; format=flowed
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I see "unix realname = Yes" as testparm output in Samba 2.2.0 but it is not
mentioned in the documentation. Does anyone know what it does?
--Raymond
-------------------------------------------------------------
Raymond Lutz Voice: 619-447-3246
Cognisys, Inc. Fax: 619-447-6872
1010 Old Chase Ave., Suite B http://www.cognisys.com
El Cajon (San Diego Cty), CA 92020 USA http://www.mfpa.org
Return-Path: <oliver at samera.com.py>
Delivered-To: samba at samba.org
Received: from Polaris.Pla.net.PY (polaris.pla.net.py [216.250.196.10])
by lists.samba.org (Postfix) with ESMTP id 384F6423C for
<samba at samba.org>; Tue, 12 Jun 2001 23:24:50 -0700 (PDT)
Received: (from uucp at localhost) by Polaris.Pla.net.PY (8.11.2/8.11.2)
with UUCP id f5CMQY725538; Wed, 13 Jun 2001 02:26:34 +0400
Received: from samera.com.py (sojourner.samera.com [192.168.1.1]) by
samera.com (8.9.3/8.9.3) with ESMTP id CAA16880; Wed, 13 Jun 2001
02:23:39 -0400
Message-ID: <3B2706EA.5030001 at samera.com.py>
Date: Wed, 13 Jun 2001 02:23:38 -0400
From: "Oliver Schulze L." <oliver at samera.com.py>
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.1)
Gecko/20010607
X-Accept-Language: en-us
MIME-Version: 1.0
To: Posthuma Cpl Benjamin J <POSTHUMABJ at mctssa.usmc.mil>
Cc: "'samba at samba.org'" <samba at samba.org>
Subject: Re: Samba troubles with Windows 2000
References: <5F7587961057D211ABE9004095102F780195ACC6 at ex.mctssa.usmc.mil
>
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Which version of Samba do you have?
Are you trying to join the Win2k boxes to the Samba PDC?
Samba 2.0.x does no support Win2k Domain logons.
Oliver
Posthuma Cpl Benjamin J wrote:
>Hi,
>I have had samba up and running for the past 6 months between a Sparc20
>running SunOS 4.1.1 and several Windows NT 4.0 machines. I had one NT
>server, 4 NT workstations and the Sparc20 on one domain. It has worked
>perfectly the entire time. However, I just performed a upgrade to all my NT
>machines, replacing them with much faster computers that had Windows 2000 on
>them. The network is back up (with all different IP addresses) and running
>fine, save for the fact that Samba will no longer work. FTP still works,
>and it still shows up on my network. When i look at the samba log files on
>the Sparc machine, I can see that every day it tries to connect but comes
>back with an error that states: "Could not find user 'administrator' in UNIX
>password database." How do i add the user to the database? Or, perhaps, is
>there something else I need to do? Any advice you can give me would be
>great. Thanks in advance.
>
>Ben Posthuma
>
>Mr. Benjamin J. Posthuma
>MC Network Design Facility
>MCTSSA Camp Pendleton, CA
>Comm: (760)-725-2796
>DSN: 365-2796
>
Return-Path: <alexander.skwar at delphiauto.com>
Delivered-To: samba at lists.samba.org
Received: from ahmler4.mail.eds.com (ahmler4.mail.eds.com
[192.85.154.77]) by lists.samba.org (Postfix) with ESMTP id 349554693
for <samba at lists.samba.org>; Wed, 13 Jun 2001 00:23:24 -0700 (PDT)
Received: from ahmlir1.mail.eds.com (ahmlir1-2.mail.eds.com
[192.85.154.25]) by ahmler4.mail.eds.com (8.11.1/8.11.1) with ESMTP id
f5D7N0C27371; Wed, 13 Jun 2001 03:23:00 -0400
Received: from ahmlir1.mail.eds.com (localhost [127.0.0.1]) by
ahmlir1.mail.eds.com (8.11.3/8.11.3) with ESMTP id f5D7Mu424770; Wed,
13 Jun 2001 03:22:56 -0400 (EDT)
Received: from koedgw01.delcoelect.com (koedgw01.delcoelect.com
[144.250.1.39]) by ahmlir1.mail.eds.com (8.11.3/8.11.0) with ESMTP id
f5D7Muk24766; Wed, 13 Jun 2001 03:22:56 -0400 (EDT)
Received: from notes.delphiauto.com (uskokg99.delcoelect.com
[144.250.3.44]) by koedgw01.delcoelect.com (8.9.3/8.9.3) with SMTP id
CAA08321; Wed, 13 Jun 2001 02:22:54 -0500 (EST)
From: alexander.skwar at delphiauto.com
Received: by notes.delphiauto.com(Lotus SMTP MTA v4.6.7 (934.1
12-30-1999)) id 05256A6A.00287917 ; Wed, 13 Jun 2001 02:22:04 -0500
X-Lotus-FromDomain: DELPHIAUTO
To: Craig Kelley <ink at inconnu.isu.edu>
Cc: samba at lists.samba.org
Message-ID: <05256A6A.00286CA5.00 at notes.delphiauto.com>
Date: Wed, 13 Jun 2001 09:10:17 +0200
Subject: Re: Windows 95 clients cannot connect
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Disposition: inline
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hello Craig!
On 12.06.2001 17:45:57 Craig Kelley wrote:
> Setup WINS in the TCP/IP control panel.
Okay, I could/might do this - will I have to enable WINS support on Samba as
well to make this work? I hesitate, because (from man 5 smb.conf):
wins support (G)
This boolean controls if the nmbd(8) process in Samba will act as a WINS
server. You should
not set this to true unless you have a multi-subnetted network and
you wish a particular nmbd to be your WINS server.
Note that you should NEVER set this to true
on more than one machine in your network.
Default: wins support = no
Now, the "NEVER" in the above sentence scares me a little...
Hmm, I wonder - in the NT 4.0 clients (where connecting to the shares works),
WINS is not enabled - at least wntipcfg doesn't show any entries for Primary and
Secondary WINS Server?!
Will/Should I still enable WINS?
What's WINS good for, anyways? I thought, it's just used to support browsing
for shares - wrong?
Thanks a lot,
Alexander
Return-Path: <xxjcxx at hotmail.com>
Delivered-To: samba at lists.samba.org
Received: from hotmail.com (f10.law6.hotmail.com [216.32.241.10]) by
lists.samba.org (Postfix) with ESMTP id 65E59422A for
<samba at lists.samba.org>; Wed, 13 Jun 2001 00:59:59 -0700 (PDT)
Received: from mail pickup service by hotmail.com with Microsoft
SMTPSVC; Wed, 13 Jun 2001 00:59:36 -0700
Received: from 209.179.32.130 by lw6fd.law6.hotmail.msn.com with HTTP;
Wed, 13 Jun 2001 07:59:36 GMT
X-Originating-IP: [209.179.32.130]
From: "Corey Terveer" <xxjcxx at hotmail.com>
To: samba at lists.samba.org
Subject: file locking problem samba
Date: Wed, 13 Jun 2001 00:59:36 -0700
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Message-ID: <F10G3sGtQrVzDds8W470000af0c at hotmail.com>
X-OriginalArrivalTime: 13 Jun 2001 07:59:36.0678 (UTC)
FILETIME=[CA2F9860:01C0F3DE]
X-Converted-To-Plain-Text: from text/html by demime 0.98b
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Samba 2.2.0 running.
I would like to use it to share some of my software programs, but i can't
due to file locks and op locks, For the share I would like to turn all
locking off. How would I go about doing this, i tryed this but no
success: [ctc]
share modes = no
oplocks = no
locking = no
blocking locks = no
veto oplock files = /*.*/
fake oplocks = yes
comment = data
path = /samba/CTC
read only = no
volume = data
guest ok = no What do i need to change on the share or is part of
the global config? please help me! thanks
jc
------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
Return-Path: <BellCB at logica.com>
Delivered-To: samba at lists.samba.org
Received: from server-20.tower-4.starlabs.net
(mail.london-1.starlabs.net [212.125.75.12]) by lists.samba.org
(Postfix) with SMTP id 7404E45D9 for <samba at lists.samba.org>; Wed, 13
Jun 2001 01:14:53 -0700 (PDT)
X-VirusChecked: Checked
Received: (qmail 20367 invoked from network); 13 Jun 2001 08:02:59 -0000
Received: from pag.logica.co.uk (193.123.204.67) by
server-20.tower-4.starlabs.net with SMTP; 13 Jun 2001 08:02:59 -0000
Received: from mauchly.logica.co.uk (mauchly.logica.co.uk
[158.234.71.80]) by pag.logica.co.uk (8.9.1/8.9.1) with ESMTP id
JAA24624 for <samba at lists.samba.org>; Wed, 13 Jun 2001 09:14:02 +0100
Received: by mauchly.logica.co.uk with Internet Mail Service
(5.5.2448.0) id <MKGJ4HF6>; Wed, 13 Jun 2001 09:14:00 +0100
Message-ID: <C9054F12A3EED311B0160090274D9121038DB680 at shannon.ie.logica.
com>
From: "Bell, Corinne" <BellCB at logica.com>
To: "'samba at lists.samba.org'" <samba at lists.samba.org>
Subject: FW: samba
Date: Wed, 13 Jun 2001 09:13:59 +0100
X-Mailer: Internet Mail Service (5.5.2448.0)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
> Hi
>
> Is there any known conflicts with Samba version 2.0.6 and windows 2000.
> Some of our users have noticed a slow connectivity.
>
> Thanks
> Coirnne
>
> mailto:bellcb at logica.com
>
Return-Path: <aurelien.lemaire at compos-juliot.fr>
Delivered-To: samba at samba.org
Received: from mailrelay2.mc2.net (mailrelay2.ornis.com
[195.101.197.45]) by lists.samba.org (Postfix) with ESMTP id 6FEB547DF
for <samba at samba.org>; Wed, 13 Jun 2001 02:02:58 -0700 (PDT)
Received: from intranix.composjuliot.fr ([194.133.125.111]) by
mailrelay2.mc2.net (8.11.3/8.11.3) with SMTP id f5D7xP321249 for
<samba at samba.org>; Wed, 13 Jun 2001 09:59:26 +0200
From: aurel <aurelien.lemaire at compos-juliot.fr>
Reply-To: aurelien.lemaire at compos-juliot.fr
Organization: CJGT
To: samba at samba.org
Subject: win98 --> file server NT4.0 = ERROR
Date: Wed, 13 Jun 2001 10:37:15 +0200
X-Mailer: KMail [version 1.0.28]
Content-Type: text/plain
MIME-Version: 1.0
Message-Id: <01061311015705.01188 at intranix.composjuliot.fr>
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I'm french, so sorry for my english !!! ....
My situation:
I have a samba 2.2 PDC (master browser) for my domain on a RedHat 6.2
The PCs workstation are win98, NT4.0 and Linux
When workstations win98 connecting to NT4 server file, the connection isn't accepted at any time:
sometime that display : "This user login have expired " an refused the connection to the network
share.
For correct this probleme i must logout on the workstation, log in whith another username
(of the domain) an relog in whith the first log so sometime it's correct it !!
how i do for i have not this problem ???? :-(((((
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!! May linux be with you !!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Return-Path: <becker at lufa-sp.vdlufa.de>
Delivered-To: samba at lists.samba.org
Received: from mailer.lufa-sp.vdlufa.de (pD955DCBD.dip.t-dialin.net
[217.85.220.189]) by lists.samba.org (Postfix) with ESMTP id 9005644FE
for <samba at lists.samba.org>; Wed, 13 Jun 2001 03:22:41 -0700 (PDT)
Received: from becker (becker.lufa-sp.vdlufa.de [192.168.3.20]) by
mailer.lufa-sp.vdlufa.de (8.9.3/8.9.3) with SMTP id MAA08139; Wed, 13
Jun 2001 12:21:46 +0200
Reply-To: <becker at lufa-sp.vdlufa.de>
From: "Stefan Becker" <becker at lufa-sp.vdlufa.de>
To: "Craig Kelley" <ink at inconnu.isu.edu>
Cc: <samba at lists.samba.org>
Subject: RE: Windows 95 clients cannot connect (Wins Server)
Date: Wed, 13 Jun 2001 12:22:11 +0200
Message-ID: <NDBBJPAJIMDMPCDAAODMAEFMFNAA.becker at lufa-sp.vdlufa.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0)
In-Reply-To: <05256A6A.00286CA5.00 at notes.delphiauto.com>
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
you will only need a WINS Server (and the TCP/IP setup
of all the Clients pointing to the this WINS Server only),
if you are using a segmented network. That means that
your Clients are not on ONE physical piece of Wire.
Windows' browser lists are maintained by NetBios broadcasts
that are NOT transported across a routed network.
A WINS Server maintains the Workgroups host lists via
TCP/IP.
If you can see all your servers and clients in Network
neighborhood then don't bother with WINS.
I may be wrong about some of the technical details but
for all practical purposes that's how I understand it.
Stefan
LUFA Speyer (EDV)
email: becker at lufa-sp.vdlufa.de
tel : +49 (0)6232-629542
fax : +49 (0)6232-629544
http://www.lufa-speyer.de/
Return-Path: <robert.meiners at gonicus.de>
Delivered-To: samba at lists.samba.org
Received: from mail1.dinet.de (mail1.dinet.de [212.8.0.3]) by
lists.samba.org (Postfix) with SMTP id ECF764E7E for
<samba at lists.samba.org>; Wed, 13 Jun 2001 03:53:46 -0700 (PDT)
Received: (qmail 19138 invoked from network); 13 Jun 2001 09:47:39 -0000
Received: from relay-1.dinet.de (HELO ots-1) (@212.8.0.36) by
mail1.dinet.de with SMTP; 13 Jun 2001 09:47:39 -0000
Content-Type: text/plain; charset="iso-8859-1"
From: Robert Meiners <robert.meiners at gonicus.de>
To: samba at lists.samba.org
Subject: Failure with Samba 2.2.0
Date: Wed, 13 Jun 2001 12:53:13 +0200
X-Mailer: KMail [version 1.2]
MIME-Version: 1.0
Message-Id: <01061312531300.04089 at ots-1>
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hallo,
I've installed the 2.2 RPMs on a RedHat 7.1.
motly it looks well, but when call 'smbstatus'
I get following answer.
- -------------------
[root at fs-1 root]# smbstatus
Samba version 2.2.0
Service uid gid pid machine
- ----------------------------------------------
Failed to open byte range locking database
ERROR: Failed to initialise locking database
Can't initialise locking module - exiting
- ---------------
It seams to depend on this file.
/var/lock/samba/brlock.tdb
But i don't really look thru. :?
Robert
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.5 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE7J0YdwozIcziS6EIRAsodAJ46kiJRw9xydtd3rj7L0eXN/s4UEQCglRqk
mG41FKJGFPM8+3hqL+RSARQ=
=aTb5
-----END PGP SIGNATURE-----
Return-Path: <yan at cardinalengineering.com>
Delivered-To: samba at lists.samba.org
Received: from cardinalengineering.com (bftc5p68.islc.net
[63.71.113.68]) by lists.samba.org (Postfix) with ESMTP id 4304B45F0
for <samba at lists.samba.org>; Wed, 13 Jun 2001 04:14:29 -0700 (PDT)
Received: (from mail at localhost) by cardinalengineering.com (8.9.3/8.9.3)
id HAA19169 for <samba at lists.samba.org>; Wed, 13 Jun 2001 07:14:05
-0400
X-Authentication-Warning: aphrodite.cardinal.lan: mail set sender to
<yan at cardinalengineering.com> using -f
X-Authentication-Warning: aphrodite.cardinal.lan: Processed from queue
/var/spool/mqpost-amavis
X-Authentication-Warning: aphrodite.cardinal.lan: Processed by mail with
-C /etc/sendmail.orig.cf
Received: from cardinalengineering.com (hamlet.cardinal.lan
[192.168.0.4]) by cardinalengineering.com (8.9.3/8.9.3) with ESMTP id
HAA19079 for <samba at lists.samba.org>; Wed, 13 Jun 2001 07:14:02 -0400
Message-ID: <3B274AFA.8010704 at cardinalengineering.com>
Date: Wed, 13 Jun 2001 07:14:02 -0400
From: Yan Seiner <yan at cardinalengineering.com>
Organization: Cardinal Engineering, Inc.
User-Agent: Mozilla/5.0 (X11; U; Linux 2.2.17intl i686; en-US; rv:0.9.1)
Gecko/20010608
X-Accept-Language: en-us
MIME-Version: 1.0
To: samba at lists.samba.org
Subject: samba + NIS
Content-Type: text/plain; charset=ISO-8859-2; format=flowed
Content-Transfer-Encoding: 7bit
X-AntiVirus: scanned for viruses by AMaViS 0.2.1 (http://amavis.org/)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Is there a HOW-TO or a doc somewhere for setting up samba + NIS? I've
looked in the archives and on the web and couldn't find anything.
I am considering NIS so that I can have the same users on my three
servers, so I would need to set up a master and two slaves. But how do
I get samba to use NIS for smbpasswd? Or am I missing something really
basic?
I have been working with samba for a few years, but have never worked
with NIS, so this may be a very stupid question.
--Yan
Return-Path: <VladutaC at ca-ib.com>
Delivered-To: samba at lists.samba.org
Received: from vie-cs3.ca-ib.com (mail1.ca-ib.com [212.27.124.49]) by
lists.samba.org (Postfix) with ESMTP id 59C8A4596 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 04:37:23 -0700 (PDT)
Received: by vie-cs3.ca-ib.com with Internet Mail Service (5.5.2653.19)
id <MWS6QKZN>; Wed, 13 Jun 2001 13:36:51 +0200
Message-ID: <F131C3737223D111962300805F0DD08F3CF61C at buh-cs0.ca-ib.com>
From: Vladuta Cristian <VladutaC at ca-ib.com>
To: "'Samba (E-mail)" <samba at lists.samba.org>
Subject: awaiting mappings on Samba clients
Date: Wed, 13 Jun 2001 13:36:48 +0200
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Guys,
Just let me know whether you also experience this damn long time-out when
mapping the samba shares on W95/NT clients. Afterwards everything is decent
in terms of browsing speed.
Craig Kelley and Andrew Bartlett suggested me to work on the WINS setup for
both samba and clients but I'm afraid the time-out is still there.
So, I've got Samba 2.0.7 and an NT based WINS-DHCP solution addressing the
name resolution. All the clients are running NT login scripts and get stuck
like that for about 1 min when attaching to the Samba shares. They know who
the WINS is, the Samba IP is present in the WINS database but still
everything is slow. Once the mapping is done, the rest is OK as speed.
Tell me, do you experience the same speed when mapping samba shares ?
Thank you,
Cristian Vladuta
Sys Admin ,CA IB Securities, CA IB Romania
Phone +401 315 20 30
Fax +401 315 20 90
Return-Path: <kimmo.akkanen at remedium.fi>
Delivered-To: samba at lists.samba.org
Received: from mbox.teliafi.net (node1.teliafi.net [195.10.132.101]) by
lists.samba.org (Postfix) with ESMTP id AF12C4E5C for
<samba at lists.samba.org>; Wed, 13 Jun 2001 04:45:46 -0700 (PDT)
Date: Wed, 13 Jun 2001 14:43:59 +0300
From: Kimmo Akkanen <kimmo.akkanen at remedium.fi>
Subject: TEMPDIR.TMP ?
To: samba at lists.samba.org
Message-id: <3B2751FF.97C0C27D at remedium.fi>
Organization: Remedium Oy/Ltd
MIME-version: 1.0
X-Mailer: Mozilla 4.76 [en] (WinNT; U)
Content-type: text/plain; charset=us-ascii
Content-transfer-encoding: 7bit
X-Accept-Language: en
References: <20010612150256.77C304B0A at lists.samba.org>
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi!
Everytime I create a directory on a share, the directory automatically
get's one file inside, named "TEMPDIR.TMP". What's going on, somebody
leave some debug code or what? =) Samba ver 2.2.
--
Kimmo Akkanen
IT-Officer
Remedium Ltd./Oy
phone. +358 9 6226 7125
cell. +358 40 9000 125
fax. +358 9 6226 7114
kimmo.akkanen at remedium.fi
Return-Path: <lsteenhu at gcc.dhl.com>
Delivered-To: samba at samba.org
Received: from gateway2.dhl.com (lhr236c.dhl.com [198.141.199.236]) by
lists.samba.org (Postfix) with ESMTP id 93D0046A2 for
<samba at samba.org>; Wed, 13 Jun 2001 05:04:42 -0700 (PDT)
Received: from keeper.gcc.dhl.com (localhost [127.0.0.1]) by
gateway2.dhl.com (Switch-2.1.0/Switch-2.1.0) with ESMTP id
f5DCAT607262 for <samba at samba.org>; Wed, 13 Jun 2001 12:10:29 GMT
Received: (from adm at localhost) by keeper.gcc.dhl.com (8.8.6
(PHNE_17135)/8.8.6/SML 1.2.2) id OAA02558 for <samba at samba.org>; Wed,
13 Jun 2001 14:04:10 +0200 (METDST)
X-Authentication-Warning: keeper.gcc.dhl.com: adm set sender to
<lsteenhu at gcc.dhl.com> using -f
Received: from gcclo1.gcc.dhl.com(172.20.200.1) by keeper.gcc.dhl.com
via smap (V1.3) id sma002518; Wed Jun 13 14:04:05 2001
Received: from gcc.dhl.com ([172.20.86.191]) by gcclo1.gcc.dhl.com
(Netscape Messaging Server 3.6) with ESMTP id AAA49EF for
<samba at samba.org>; Wed, 13 Jun 2001 14:04:04 +0200
Message-ID: <3B2756B2.9F1930AA at gcc.dhl.com>
Date: Wed, 13 Jun 2001 14:04:02 +0200
From: "Luc STEENHUYSE" <lsteenhu at gcc.dhl.com>
Reply-To: lsteenhu at gcc.dhl.com
Organization: DHL GCC
X-Sender: "Luc STEENHUYSE" <lsteenhu at gcc.dhl.com>
X-Mailer: Mozilla 4.75 [en]C-CCK-MCD (Win95; U)
X-Accept-Language: en
MIME-Version: 1.0
To: samba at samba.org
Subject: Samba 2.0.9 smbd memory usage on HP-UX 11.00
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
This may be a quick one if this is a known issue :
We are running samba 2.0.6 on HP-UX 11.00. There are some problems
with this version ( signal 11 crashes of smbd processes ) and we are
looking into upgrading to 2.0.9. The code compiled fine and a
functional test on a test-machine was OK : one smbd process uses
around 2 Mb of memory. When we install the same version on our
production server ( + 400 concurrent users ) we see that each smbd
process takes up around 12 Mb ! Please note we did not reboot the
server since and it is still running 2.0.6.
Any suggestions on this one ?
Best regards,
Luc Steenhuyse
Return-Path: <u13471 at hs-harz.de>
Delivered-To: samba at lists.samba.org
Received: from steinadler.fh-harz.de (unknown [194.95.16.230]) by
lists.samba.org (Postfix) with ESMTP id 48D784EE3 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 05:05:44 -0700 (PDT)
Received: from hs-harz.de ([194.95.18.55]) by steinadler.fh-harz.de
(Netscape Messaging Server 3.6) with ESMTP id AAABBAC2; Wed, 13 Jun
2001 14:05:19 +0200
Message-ID: <3B27572A.3F2B368A at hs-harz.de>
Date: Wed, 13 Jun 2001 14:06:02 +0200
From: "Edgar Soldin" <u13471 at hs-harz.de>
Organization: Hochschule Harz
X-Mailer: Mozilla 4.77 [en] (Win98; U)
X-Accept-Language: en
MIME-Version: 1.0
To: Kyle Freestone <kyle at rawah.co.larimer.co.us>
Cc: samba at lists.samba.org
Subject: Re: DNS and Samba share mapping
References: <200106121541.JAA13137 at comanche.rawah.co.larimer.co.us>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
They do ... but that will not solve your prob if the workstations are in
different subnets ;(.
It just enables your samba box to "see" or find all boxes that are known to
your dns server.
Greets
Ed
Kyle Freestone wrote:
>
> Does any version of Samba support DNS name resolution instead of WINS. The
> reason I'm wondering is, our Network people are wanting to eliminate all of our
> WINS servers, and go strictly to DNS. I have been running a Solaris7 server w/
> Samba 2.0.0 using the existing NT WINS servers for quite a while with only a few
> problems.
> I think I have DNS resolution working on a test machine ... I think. I'm just
> concerned that I'm going to have a bunch of end-users go belly-up when they
> powerdown the WINS servers.
> Any comments or suggestions???
>
> Kyle Freestone
> kyle at rawah.co.larimer.co.us
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
--
public class WhoDidIt{ // A comment. I love comments
private static Person sender;
public static void main (String[] foo){
sender = new Student();
sender.setName({"Edgar", "Soldin"});
sender.setCourse("Computerscience for media and art");
Adress address=new Adress();
address.setStreet("Friedrichstr. 57-59 Wh 4.511");
address.setZip(38855);
address.setCity("Wernigerode");
adress.setCountry("Germany");
sender.setAdress(address);
sender.setMobilePhone("+49171-2782880");
sender.setWebSiteUrl(" http://www.soldin.de ");
sender.setEmail(" edgar at soldin.de ");
sender.setGender(true);
System.out.println(sender.toString());
}
}
Return-Path: <rsmart at netaccess.co.nz>
Delivered-To: samba at lists.samba.org
Received: from cirrostratus.netaccess.co.nz
(cirrostratus.netaccess.co.nz [202.37.101.18]) by lists.samba.org
(Postfix) with ESMTP id 80599422A for <samba at lists.samba.org>; Wed, 13
Jun 2001 05:20:03 -0700 (PDT)
Received: from study (p116-max2.christchurch.netaccess.net.nz
[210.55.109.244]) by cirrostratus.netaccess.co.nz (8.9.3/8.9.3) with
SMTP id AAA09566 for <samba at lists.samba.org>; Thu, 14 Jun 2001
00:19:37 +1200 (NZST)
Message-Id: <3.0.32.20010614002813.00687698 at pop3.netaccess.co.nz>
X-Sender: smart at pop3.netaccess.co.nz
X-Mailer: Windows Eudora Pro Version 3.0 (32)
Date: Thu, 14 Jun 2001 00:28:22 +1200
To: samba at lists.samba.org
From: Richard Smart <rsmart at netaccess.co.nz>
Subject: Re: samba and windows printing
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Make sure the /etc/printcap has :sf: included in the entry for the shared
printer. This suppresses trailing formfeeds.
eg
lp:\
:sd=/var/spool/lpd/lp:\
:mx#0:\
:sh:\
:sf:\
:lp=/dev/null:\
:rm=ps_qms:
Richard S
At 10:32 12/06/01 -0400, you wrote:
>When printing from a Windows 98 machine their is always an extra blank
>page printed at the end of every print job. I've been reading the HOWTOs
>and it seems to happen with Windows 95 and 98 only because the
>Postscript is malformed. But I'm using the windows print driver and
>printing to a raw device on linux.
>
>Is their anyway to fix this???
>
>I'm running rh6.2 with samba2.0.8
>
>Thanks
>--
>To unsubscribe from this list go to the following URL and read the
>instructions: http://lists.samba.org/mailman/listinfo/samba
>
>
Return-Path: <Dave.Peat at THIOKOL.COM>
Delivered-To: samba at lists.samba.org
Received: from NWPRM12.THIOKOL.COM (gw2zz.thiokol.com [209.37.209.131])
by lists.samba.org (Postfix) with SMTP id 2FFC745D5 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 05:26:57 -0700 (PDT)
Received: from THIOKOL-Message_Server by NWPRM12.THIOKOL.COM with
Novell_GroupWise; Wed, 13 Jun 2001 06:26:41 -0600
Message-Id: <sb2707a1.041 at NWPRM12.THIOKOL.COM>
X-Mailer: Novell GroupWise Internet Agent 5.5.3.1
Date: Wed, 13 Jun 2001 06:26:17 -0600
From: "Dave Peat" <Dave.Peat at THIOKOL.COM>
To: <samba at lists.samba.org>
Subject: Windows XP connecting to SAMBA 2.2
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Converted-To-Plain-Text: from multipart/mixed by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hello,
I'm doing some testing with Windows XP beta 2 (build 2462) and I have a
Mandrake Linux 8.0 server set up with SAMBA 2.2.0. I can connect to the
share from Windows NT SP 6a and Windows 98. When I attempt to connect
to it from Windows XP (I can see the server) it asks for a User name &
password. No matter how I attempt to log in, it will not let me
connect. Has anyone else seen this problem?
Thanks,
Dave
Registered Linux User #184784
BEGIN:VCARD
VERSION:2.1
X-GWTYPE:USER
FN:Peat, Dave
EMAIL;WORK;PREF;NGW:Dave.Peat at THIOKOL.COM
ORG:;N410
N:Peat;Dave
TEL;WORK:(435)863-4105
TITLE:31257
END:VCARD
Return-Path: <abartlet at pcug.org.au>
Delivered-To: samba at lists.samba.org
Received: from dnscache.cbr.au.asiaonline.net
(dnscache.cbr.au.asiaonline.net [210.215.8.100]) by lists.samba.org
(Postfix) with ESMTP id 4E02D4F26 for <samba at lists.samba.org>; Wed, 13
Jun 2001 05:45:46 -0700 (PDT)
Received: from piglett.bartlett.house (as2-237.cbr.au.asiaonline.net
[210.215.10.237]) by dnscache.cbr.au.asiaonline.net (8.10.2/8.10.2)
with ESMTP id f5DCjDq09131; Wed, 13 Jun 2001 22:45:13 +1000 (EST)
Received: from yowiee.bartlett.house (IDENT:root at yowiee.bartlett.house
[192.168.1.99]) by piglett.bartlett.house (8.9.3/8.8.7) with ESMTP id
WAA14074; Wed, 13 Jun 2001 22:44:49 +1000
Received: from bartlett.house (IDENT:abartlet at piglett.bartlett.house
[192.168.1.1]) by yowiee.bartlett.house (8.9.3/8.8.7) with ESMTP id
WAA18619; Wed, 13 Jun 2001 22:44:48 +1000
Message-ID: <3B276040.44832889 at bartlett.house>
Date: Wed, 13 Jun 2001 22:44:48 +1000
From: Andrew Bartlett <abartlet at pcug.org.au>
X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.19-6.2.1 i686)
X-Accept-Language: en
MIME-Version: 1.0
To: Raymond Lutz <raylutz at cognisys.com>
Cc: samba at lists.samba.org
Subject: Re: What is "unix realname" in Samba 2.2.0
References: <5.1.0.14.2.20010612225128.02a7f090 at postoffice.pacbell.net>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Raymond Lutz wrote:
>
> I see "unix realname = Yes" as testparm output in Samba 2.2.0 but it is not
> mentioned in the documentation. Does anyone know what it does?
Its so useless that its been removed for 2.2.1, so:
a) don't worry
b) It controls wheather samba supplies the client with you real name
(from /etc/passwd) instead of "<real name>"
Andrew Bartlett
--
Andrew Bartlett
abartlet at pcug.org.au
Return-Path: <Dave.Peat at THIOKOL.COM>
Delivered-To: samba at lists.samba.org
Received: from NWPRM12.THIOKOL.COM (gw2zz.thiokol.com [209.37.209.131])
by lists.samba.org (Postfix) with SMTP id 7F5AA42F2 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 06:00:54 -0700 (PDT)
Received: from THIOKOL-Message_Server by NWPRM12.THIOKOL.COM with
Novell_GroupWise; Wed, 13 Jun 2001 07:00:40 -0600
Message-Id: <sb270f98.043 at NWPRM12.THIOKOL.COM>
X-Mailer: Novell GroupWise Internet Agent 5.5.3.1
Date: Wed, 13 Jun 2001 07:00:13 -0600
From: "Dave Peat" <Dave.Peat at THIOKOL.COM>
To: <samba at lists.samba.org>
Subject: Re: Windows XP connecting to SAMBA 2.2
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Converted-To-Plain-Text: from multipart/mixed by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Also,
The Windows XP machine and the SAMBA (Linux) machine are in different
domains.
On another Server (SUN Solaris 7) with SAMBA 2.0.7 with both machines
being in the same domain, I can map a drive to the SAMBA shares.
>>> "Dave Peat" <Dave.Peat at THIOKOL.COM> 06/13/01 06:26AM >>>
Hello,
I'm doing some testing with Windows XP beta 2 (build 2462) and I have
a
Mandrake Linux 8.0 server set up with SAMBA 2.2.0. I can connect to
the
share from Windows NT SP 6a and Windows 98. When I attempt to connect
to it from Windows XP (I can see the server) it asks for a User name &
password. No matter how I attempt to log in, it will not let me
connect. Has anyone else seen this problem?
Thanks,
Dave
Registered Linux User #184784
BEGIN:VCARD
VERSION:2.1
X-GWTYPE:USER
FN:Peat, Dave
EMAIL;WORK;PREF;NGW:Dave.Peat at THIOKOL.COM
ORG:;N410
N:Peat;Dave
TEL;WORK:(435)863-4105
TITLE:31257
END:VCARD
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
BEGIN:VCARD
VERSION:2.1
X-GWTYPE:USER
FN:Peat, Dave
EMAIL;WORK;PREF;NGW:Dave.Peat at THIOKOL.COM
ORG:;N410
N:Peat;Dave
TEL;WORK:(435)863-4105
TITLE:31257
END:VCARD
Return-Path: <abartlet at pcug.org.au>
Delivered-To: samba at lists.samba.org
Received: from dnscache.cbr.au.asiaonline.net
(dnscache.cbr.au.asiaonline.net [210.215.8.100]) by lists.samba.org
(Postfix) with ESMTP id 9778D4224 for <samba at lists.samba.org>; Wed, 13
Jun 2001 06:09:02 -0700 (PDT)
Received: from piglett.bartlett.house (as2-237.cbr.au.asiaonline.net
[210.215.10.237]) by dnscache.cbr.au.asiaonline.net (8.10.2/8.10.2)
with ESMTP id f5DD8Tq11559; Wed, 13 Jun 2001 23:08:30 +1000 (EST)
Received: from yowiee.bartlett.house (IDENT:root at yowiee.bartlett.house
[192.168.1.99]) by piglett.bartlett.house (8.9.3/8.8.7) with ESMTP id
XAA14188; Wed, 13 Jun 2001 23:08:05 +1000
Received: from bartlett.house (IDENT:abartlet at piglett.bartlett.house
[192.168.1.1]) by yowiee.bartlett.house (8.9.3/8.8.7) with ESMTP id
XAA18723; Wed, 13 Jun 2001 23:08:05 +1000
Message-ID: <3B2765B5.BF072B08 at bartlett.house>
Date: Wed, 13 Jun 2001 23:08:05 +1000
From: Andrew Bartlett <abartlet at pcug.org.au>
X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.19-6.2.1 i686)
X-Accept-Language: en
MIME-Version: 1.0
To: Ryan Bek <rbek at gborocollege.edu>
Cc: samba at lists.samba.org
Subject: Re: Web Front-End
References: <5.0.2.1.0.20010612152555.00a5dc50 at calvin.gborocollege.edu>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Ryan Bek wrote:
>
> Hello all-
>
> I've scoured the net & this list to find out information, but have come
> across little.
> Basically, I'm looking for a web front-end for Samba shares, so that folks
> outside of the network can access content in their shares. Ideally, I'd
> love to see a product that would allow file upload & download, directory
> creation, etc. I've run across a package called "smb2www", but it seems a
> bit "rough around the edges" and hasn't been updated since 1998 (from what
> I can tell). Are there folks out there that have either built their own
> web-SMB conduit (through something like PHP or Perl), or does anyone know
> if commercial products exist on the Microsoft end for their NT products
> that might work with Samba shares? Or, alternatively, what are folks doing
> to allow those off their networks to gain access to Samba shares (other
> than something like VPN)?
I offer SFTP access (OpenSSH) to my clients. The smb2www is a bit stale
and won't run under 'taint mode' without modification, but I have a
hacked-up version that allows access to one share only and which has a
few minor notions of security attached. I'll see if I can find it if
you want.
Andrew Bartlett
--
Andrew Bartlett
abartlet at pcug.org.au
Return-Path: <abartlet at pcug.org.au>
Delivered-To: samba at lists.samba.org
Received: from dnscache.cbr.au.asiaonline.net
(dnscache.cbr.au.asiaonline.net [210.215.8.100]) by lists.samba.org
(Postfix) with ESMTP id CAFAE4F2D for <samba at lists.samba.org>; Wed, 13
Jun 2001 06:10:14 -0700 (PDT)
Received: from piglett.bartlett.house (as2-237.cbr.au.asiaonline.net
[210.215.10.237]) by dnscache.cbr.au.asiaonline.net (8.10.2/8.10.2)
with ESMTP id f5DD9eq11673; Wed, 13 Jun 2001 23:09:41 +1000 (EST)
Received: from yowiee.bartlett.house (IDENT:root at yowiee.bartlett.house
[192.168.1.99]) by piglett.bartlett.house (8.9.3/8.8.7) with ESMTP id
XAA14194; Wed, 13 Jun 2001 23:09:16 +1000
Received: from bartlett.house (IDENT:abartlet at piglett.bartlett.house
[192.168.1.1]) by yowiee.bartlett.house (8.9.3/8.8.7) with ESMTP id
XAA18730; Wed, 13 Jun 2001 23:09:16 +1000
Message-ID: <3B2765FC.71E2DB37 at bartlett.house>
Date: Wed, 13 Jun 2001 23:09:16 +1000
From: Andrew Bartlett <abartlet at pcug.org.au>
X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.19-6.2.1 i686)
X-Accept-Language: en
MIME-Version: 1.0
To: Yan Seiner <yan at cardinalengineering.com>
Cc: samba at lists.samba.org
Subject: Re: samba + NIS
References: <3B274AFA.8010704 at cardinalengineering.com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Yan Seiner wrote:
>
> Is there a HOW-TO or a doc somewhere for setting up samba + NIS? I've
> looked in the archives and on the web and couldn't find anything.
>
> I am considering NIS so that I can have the same users on my three
> servers, so I would need to set up a master and two slaves. But how do
> I get samba to use NIS for smbpasswd? Or am I missing something really
> basic?
>
> I have been working with samba for a few years, but have never worked
> with NIS, so this may be a very stupid question.
>
Probably better to use secuirty=domain or secuirty=server, and do away
with the need for the smbpasswd file. I run security=server and NIS
here, and havn't noticed any problems.
Andrew Bartlett
--
Andrew Bartlett
abartlet at pcug.org.au
Return-Path: <mekilroy at risingedge.com>
Delivered-To: samba at lists.samba.org
Received: from mailhost.digitalselect.net (unknown [209.225.164.170]) by
lists.samba.org (Postfix) with ESMTP id B6F0B4F2B; Wed, 13 Jun 2001
06:18:30 -0700 (PDT)
Received: from wizzard.rising-edge (risingedge.com [216.181.63.36]) by
mailhost.digitalselect.net (8.11.1/8.11.1) with SMTP id f5DDJeS90482;
Wed, 13 Jun 2001 09:19:40 -0400 (EDT)
Received: from diamondback (unverified [192.168.0.26]) by
wizzard.rising-edge (EMWAC SMTPRS 0.83) with SMTP id
<B0000082146 at wizzard.rising-edge>; Wed, 13 Jun 2001 09:17:49 -0400
Message-ID: <004d01c0f40b$3ddf35f0$1a00a8c0 at diamondback>
From: "M. Kilroy" <mekilroy at risingedge.com>
To: <samba at lists.samba.org>, <samba-ntdom at lists.samba.org>
Cc: "=?utf-8?B?0KDRj9Cx0YbQtdCyINCQ0L3QtNGA0LXQuSDQodC10YDQs9C10LXQstC40
Yc=?=" <Andrey at RIAC.extrim.ru>
References: <008f01c0f016$85097470$1a00a8c0 at diamondback>
<15140.167.516945.676074 at frungy.org>
<032401c0f279$48354870$1a00a8c0 at diamondback>
<20010611165017.B23265 at va.samba.org>
<05d201c0f338$e3c3c4f0$1a00a8c0 at diamondback>
<3B263484.9060400 at explodingsheep.org>
Subject: WINBIND
Date: Wed, 13 Jun 2001 09:17:48 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4133.2400
X-Antirelay: Good relay from local net2 192.168.0.0/24
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I actually got winbind running, and can see it in my proccess list. It
turns out (for those of you who were also looking for the same fix) that I
wasn't completely wiping out the old version of samba before installing the
new version. I did that, reinstalled the new version and now winbind runs.
But I can't log on to the linux box from an NT workstation. I did a getent
group and got all the correct groups back, but when i'm at an NT station and
trying to get to the linux box from Network Neighborhood it only admits me
as guest or nobody. Does anyone know why? I even have invalid users =
nobody in my smb.conf and it still creates a "nobody" direcotry.
THANKS!
----- Original Message -----
From: "Simon" <simon at explodingsheep.org>
To: <samba-ntdom at lists.samba.org>
Cc: "M. Kilroy" <mekilroy at risingedge.com>
Sent: Tuesday, June 12, 2001 11:25 AM
Subject: Re: Fw: LOG FILE
M. Kilroy wrote:
>>Hmm. I was just wondering whether it was the 2.2 version or the one from
>>HEAD. 2.0.7 isn't going to work very will with winbind.
>>
>
> See this is what I don't understand... I downloaded HEAD, installed it
with
> the ./configure (with pam), make && make install, but I don't know if it
> should "take over" at that point or what. Since I already had at least
one
> other version of samba running, I am not sure if there is some uninstall I
> should do before installing a new version. Maybe I don't even have the
new
> ver of Samba running, which is why winbind isn't even starting?
>
> Any thoughts?
>
> THANKS!
> ~Mary
>
if you're running linux, do
'/proc/<ps>/exe -V'
where ps is the process number of the smbd as reported by ps
to get the version number.
Regards, Simon.
--
Warning!: The contents of this email are a memetic virus.
You have been infected and should seek medical attention.
Return-Path: <aandrews at eng.okla.seagate.com>
Delivered-To: samba at lists.samba.org
Received: from gwextclu.seagate.com (gwextclu.seagate.com
[204.160.183.18]) by lists.samba.org (Postfix) with SMTP id 217B54400
for <samba at lists.samba.org>; Wed, 13 Jun 2001 06:24:43 -0700 (PDT)
Received: from 172.18.17.4 by gwextclu.seagate.com with ESMTP ( (MMS
v4.7)); Wed, 13 Jun 2001 06:24:16 -0700
X-Server-Uuid: 1569d162-b3be-4edd-8d78-ab9187b54f11
Received: from auth0.it.stsj.seagate.com (auth0.it.stsj.seagate.com
[192.168.109.16]) by seastamp.seagate.com (8.11.2/8.11.2) with ESMTP
id f5DDOHx03695; Wed, 13 Jun 2001 13:24:18 GMT
Received: from ocosdrc01.eng.okla.seagate.com (
host-10-9-7-65.okla.seagate.com [10.9.7.65] (may be forged)) by
auth0.it.stsj.seagate.com with ESMTP id NAA28962; Wed, 13 Jun 2001 13:
24:16 GMT
Received: from sdrc30 by ocosdrc01.eng.okla.seagate.com (
8.9.3+Sun/SMI-SVR4) id IAA19346; Wed, 13 Jun 2001 08:23:26 -0500 (CDT)
Message-ID: <200106131323.IAA19346 at ocosdrc01.eng.okla.seagate.com>
Date: Wed, 13 Jun 2001 08:23:24 -0500 (CDT)
From: "Arnold Andrews X-324-4292" <aandrews at eng.okla.seagate.com>
Reply-To: "Arnold Andrews X-324-4292" <aandrews at eng.okla.seagate.com>
Subject: Re: Passwd change via SWAT
To: fmaresca at monssa.com.ar
Cc: samba at lists.samba.org
MIME-Version: 1.0
X-Mailer: dtmail 1.3.0 @(#)CDE Version 1.4.2 SunOS 5.8 sun4u sparc
X-WSS-ID: 1739B60A2795256-01-01
Content-Type: text/plain; charset=us-ascii
Content-MD5: MNWHSiLw+xFtNv1Wsdx99w==
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
> --On Tuesday, June 12, 2001 1:31 PM -0300 fmaresca at monssa.com.ar wrote:
>
> > I got 2 hosts running samba. One is over a RH6.2 and it
> > works fine; the second machine is running samba over Debian
> > Potato and it was installed to replaces the other (old) machine.
> > The problem is that once samba is all configured and runs ok in
> > this new amchine, attempts to login in swat as an non-root user
> > fails.
> > this never was happens in the old machine, and users in the
> > network was able to change their passwd using swat. This problem
> > is relative to samba, swat or debian? Any ideas?
>
> It's my understanding that ONLY root can run SWAT. If that *is* true, what
> was done to Samba on the old machine to change that?
>
> - john
> --
I have successfully logged in to swat as a regular user on my 2.2 server. I
find that it won't accept the samba password, but rather wants the Unix password
for authentication. If your Unix passwords are not synched with your samba
password, then use the Unix password. You will be changing the samba password
once inside the SWAT.
Good luck,
Arnold Andrews
Return-Path: <alexander.skwar at delphiauto.com>
Delivered-To: samba at lists.samba.org
Received: from plmler3.mail.eds.com (plmler3.mail.eds.com
[199.228.142.73]) by lists.samba.org (Postfix) with ESMTP id D6C7E4400
for <samba at lists.samba.org>; Wed, 13 Jun 2001 06:24:48 -0700 (PDT)
Received: from plmlir1.mail.eds.com (plmlir1-2.mail.eds.com
[199.228.143.132]) by plmler3.mail.eds.com (8.11.1/8.11.1) with ESMTP
id f5DDOPF00938; Wed, 13 Jun 2001 09:24:25 -0400
Received: from plmlir1.mail.eds.com (localhost [127.0.0.1]) by
plmlir1.mail.eds.com (8.11.3/8.11.3) with ESMTP id f5DDOHl12833; Wed,
13 Jun 2001 09:24:18 -0400 (EDT)
Received: from koedgw01.delcoelect.com (koedgw01.delcoelect.com
[144.250.1.39]) by plmlir1.mail.eds.com (8.11.3/8.11.0) with ESMTP id
f5DDOGp12794; Wed, 13 Jun 2001 09:24:16 -0400 (EDT)
Received: from notes.delphiauto.com (uskokg99.delcoelect.com
[144.250.3.44]) by koedgw01.delcoelect.com (8.9.3/8.9.3) with SMTP id
IAA08411; Wed, 13 Jun 2001 08:24:11 -0500 (EST)
From: alexander.skwar at delphiauto.com
Received: by notes.delphiauto.com(Lotus SMTP MTA v4.6.7 (934.1
12-30-1999)) id 05256A6A.00499959 ; Wed, 13 Jun 2001 08:23:53 -0500
X-Lotus-FromDomain: DELPHIAUTO
To: becker at lufa-sp.vdlufa.de
Cc: "Craig Kelley" <ink at inconnu.isu.edu>, samba at lists.samba.org
Message-ID: <05256A6A.00498F0B.00 at notes.delphiauto.com>
Date: Wed, 13 Jun 2001 13:47:46 +0200
Subject: RE: Windows 95 clients cannot connect (Wins Server)
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Disposition: inline
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On 13.06.2001 12:22:11 Stefan Becker wrote:
> Windows' browser lists are maintained by NetBios broadcasts
> that are NOT transported across a routed network.
Okay, thanks. Do I understand that correctly, that, if I don't care at all
about being able to browse the Network Neighborhood <sp?>, I also do not need a
WINS server?
The servers that I can control are all on one segment. However, the clients are
all on another segment. To complicate it further, the clients are all connected
to some hubs. These hubs are bundled and then connected to a switch. And again
the connection is bundled and the connection goes to yet another switch:
--------
- CL 1 - --\
-------- |
|
-------- |
- CL 2 - --+--\
-------- | |
| | /---\ /---\ --------
-------- | | | S | | S | /-- - SV A -
- CL 3 - --/ | | W | | W | | --------
-------- \-+ I | | I +-/
| T +--+ T |
/-+ C | | C +-\
-------- | | H | | H | | --------
- CL A - -----+ \---/ \---/ \-- - SV B -
-------- | --------
|
-------- |
- CL B - -----/
--------
- In this diagram, the '+' are hubs
- CL 1, CL 2, CL 3, CL A and CL B are Clients
- SV 1 and SV 2 are Servers
( Turn on a font like Courier to 'enjoy' the ASCII art )
As you can (?) see, that's really a segmented network. The switches are CISCO
switches.
Now, where should I install a WINS Server?
Return-Path: <aandrews at eng.okla.seagate.com>
Delivered-To: samba at lists.samba.org
Received: from gwextclu.seagate.com (gwextclu.seagate.com
[204.160.183.18]) by lists.samba.org (Postfix) with SMTP id DB40E4F5C
for <samba at lists.samba.org>; Wed, 13 Jun 2001 06:36:12 -0700 (PDT)
Received: from 172.18.17.4 by gwextclu.seagate.com with ESMTP ( (MMS
v4.7)); Wed, 13 Jun 2001 06:35:46 -0700
X-Server-Uuid: 1569d162-b3be-4edd-8d78-ab9187b54f11
Received: from auth0.it.stsj.seagate.com (auth0.it.stsj.seagate.com
[192.168.109.16]) by seastamp.seagate.com (8.11.2/8.11.2) with ESMTP
id f5DDZlx06789; Wed, 13 Jun 2001 13:35:47 GMT
Received: from ocosdrc01.eng.okla.seagate.com (
host-10-9-7-65.okla.seagate.com [10.9.7.65] (may be forged)) by
auth0.it.stsj.seagate.com with ESMTP id NAA02544; Wed, 13 Jun 2001 13:
35:47 GMT
Received: from sdrc30 by ocosdrc01.eng.okla.seagate.com (
8.9.3+Sun/SMI-SVR4) id IAA19367; Wed, 13 Jun 2001 08:34:57 -0500 (CDT)
Message-ID: <200106131334.IAA19367 at ocosdrc01.eng.okla.seagate.com>
Date: Wed, 13 Jun 2001 08:34:56 -0500 (CDT)
From: "Arnold Andrews X-324-4292" <aandrews at eng.okla.seagate.com>
Reply-To: "Arnold Andrews X-324-4292" <aandrews at eng.okla.seagate.com>
Subject: Re: Windows XP connecting to SAMBA 2.2
To: samba at lists.samba.org, Dave.Peat at THIOKOL.COM
MIME-Version: 1.0
X-Mailer: dtmail 1.3.0 @(#)CDE Version 1.4.2 SunOS 5.8 sun4u sparc
X-WSS-ID: 1739B3B82800946-01-01
Content-Type: text/plain; charset=us-ascii
Content-MD5: NfcPQV9uSxCIMQURrJu3hQ==
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
> Also,
> The Windows XP machine and the SAMBA (Linux) machine are in different
> domains.
> On another Server (SUN Solaris 7) with SAMBA 2.0.7 with both machines
> being in the same domain, I can map a drive to the SAMBA shares.
>
> >>> "Dave Peat" <Dave.Peat at THIOKOL.COM> 06/13/01 06:26AM >>>
> Hello,
> I'm doing some testing with Windows XP beta 2 (build 2462) and I have
> a
> Mandrake Linux 8.0 server set up with SAMBA 2.2.0. I can connect to
> the
> share from Windows NT SP 6a and Windows 98. When I attempt to connect
> to it from Windows XP (I can see the server) it asks for a User name &
> password. No matter how I attempt to log in, it will not let me
> connect. Has anyone else seen this problem?
I think you may have just answered your own question. Try changing your XP
machine to be in the same domain.
Just a thought,
Arnold Andrews
Return-Path: <rob at steinmetznet.com>
Delivered-To: samba at lists.samba.org
Received: from atl.steinmetznet.com (atl.steinmetznet.com
[38.212.143.60]) by lists.samba.org (Postfix) with ESMTP id F22524F25
for <samba at lists.samba.org>; Wed, 13 Jun 2001 06:40:54 -0700 (PDT)
Received: from steinmetznet.com (delilah [38.212.143.170]) by
atl.steinmetznet.com (8.8.8+Sun/8.8.8) with ESMTP id JAA13535; Wed, 13
Jun 2001 09:40:29 -0400 (EDT)
Message-ID: <3B276D50.26688273 at steinmetznet.com>
Date: Wed, 13 Jun 2001 09:40:32 -0400
From: Robert Steinmetz <rob at steinmetznet.com>
Organization: Steinmetz & Associates
X-Mailer: Mozilla 4.7 [en] (WinNT; I)
X-Accept-Language: en
MIME-Version: 1.0
To: Samba <samba at lists.samba.org>
Subject: Access Denied
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I have upgraded samba to 2.2.0 and as a PDC I now have a problem with
two clients on the network which I cannot access through network
neighborhood. I get "\\machinename is not accessible access denied." If
I map network shares using the \\machinename\sharename it works fine.
One machine is Windows 98 the other is SCO VisionFS, they are the only
two machine of these types.
I'm sure I'm overlooking something simple.
--
Robert Steinmetz, AIA rob at steinmetznet.com
Principal
Steinmetz & Associates
New Orleans Atlanta
Return-Path: <mhkohne at discordia.org>
Delivered-To: samba at lists.samba.org
Received: from techno.discordia.org (techno.discordia.org
[207.8.224.10]) by lists.samba.org (Postfix) with ESMTP id 5AD344F5C
for <samba at lists.samba.org>; Wed, 13 Jun 2001 06:42:10 -0700 (PDT)
Received: from kohnelap.discordia.org (techno.discordia.org
[207.8.224.10]) by techno.discordia.org (8.11.0/8.9.3) with ESMTP id
f5DDfiw31226; Wed, 13 Jun 2001 09:41:44 -0400
Message-Id: <5.1.0.14.2.20010613091005.03498370 at 127.0.0.1>
X-Sender: mhkohne at 127.0.0.1
X-Mailer: QUALCOMM Windows Eudora Version 5.1
Date: Wed, 13 Jun 2001 09:39:04 -0400
To: <marion.haines at countygovt.brevard.fl.us>, <samba at lists.samba.org>
From: Michael Kohne <mhkohne at discordia.org>
Subject: Re: Password Change Procedures
In-Reply-To: <vines.MVC9+NcD7vA at gc2a-hplh4.countygovt.brevard.fl.us>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
At 12:59 PM 6/11/2001 -0400, Marion Haines wrote:
>Sorry to keep bothering the List, but I'm still having problems with the
>Samba/Windows/UNIX password issue. Using RH Linux 7.0, with Samba 2.0.7,
>configured as shown below.
>
># Samba config file created using SWAT
># Date: 2001/06/11 12:48:11
>
># Global parameters
>[global]
>workgroup = STGROUP
>netbios name = SMBSVR
>
>encrypt passwords = Yes
>min password length = 6
>smb passwd file = /usr/local/samba/private/smbpasswd
>passwd program = /usr/bin/passwd %u
>passwd chat = *new*password* %n\n *new*password* %n\n *updated*
>password level = 20
>username level = 10
>unix password sync = Yes
>
>socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
>domain logons = Yes
>os level = 65
>preferred master = Yes
>domain master = Yes
>dns proxy = No
>wins support = Yes
>
>When I add a new user, I provide them an initial password and they login
>and get to their shares without problem. They can also Telnet to the
>Samba server, login to Linux, and use their home directory just fine. I
>would then like them to change that initial password to a password of
>their choosing. I can't find any reference to the steps that a Windows
>user must follow to change passwords from the Windows PC.
>
>What I need to know, to help troubleshoot my particular situation, are the
>exact steps a Win95 user would need to take to have all passwords
>(Samba/Windows/UNIX) the same (i.e. run program abc, then do xyz at the
>Samba server, run applet so-and-so in Control Panel, etc, etc). Assume
>that Win95 has been patched to use encrypted passwords.
>
>Again, thank you very much for all the help provided so far.
>
>Marion D. Haines
>marion.haines at countygovt.brevard.fl.us
>Network Administrator
>Board of County Commissioners
>Brevard County, Florida
>
>=============================
>--
>To unsubscribe from this list go to the following URL and read the
>instructions: http://lists.samba.org/mailman/listinfo/samba
I'm curious about this issue myself, as I'd like to get folks on my network
to change passwords on a regular basis.
A couple of quick searches on the MS support database don't turn up a lot,
except that there is a passwords control panel under windows 9X (at least,
I only have one 9X box here to look at).
Win 2K has a 'users and passwords' control panel.
Interestingly, I found this link:
http://www.ita.doc.gov/ita_admin/lan_help/how_to_change_your_network_passw.htm
which is someone's internal instructions on password changes under 95. It
indicates that, at least for Novell Networks, 95 can change passwords via
the 'other passwords' dialog.
I just poked at my 98 box here and couldn't get that button to be active,
but I've never tried setting up my Samba server to do password changes,
either.
Interesting bits from the samba mailing list archive:
http://marc.theaimsgroup.com/?l=samba&m=95325556226928&w=2
That fellow seems to have had luck using the windows password change. I
just tried that, and it doesn't work for me, but then again, I've not
fiddled the server to try to get it to work correctly.
Possibly the system has to be setup for windows login or something.
I'd play with that control panel & see what happens in the samba logs.
Michael Kohne mhkohne at discordia.org
3000 lbs of wood, 300 foot per minute - DO NOT get in the way.
Return-Path: <fmaresca at monssa.com.ar>
Delivered-To: samba at lists.samba.org
Received: from amadeus.monssa.com.ar (unknown [200.43.69.210]) by
lists.samba.org (Postfix) with ESMTP id D121E4E72 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 07:04:37 -0700 (PDT)
Received: from pc123 (pc123.monssa.com.ar [192.168.1.123]) by
amadeus.monssa.com.ar (8.9.3/8.8.7) with ESMTP id AAA02552; Wed, 13
Jun 2001 00:48:20 -0400
From: fmaresca at monssa.com.ar
To: "Arnold Andrews X-324-4292" <aandrews at eng.okla.seagate.com>
Date: Wed, 13 Jun 2001 10:53:20 -0300
MIME-Version: 1.0
Content-type: text/plain; charset=ISO-8859-1
Content-transfer-encoding: 7bit
Subject: Thank you
Cc: samba at lists.samba.org
Message-ID: <3B274620.20977.48DFC0D at localhost>
Priority: normal
X-mailer: Pegasus Mail for Win32 (v3.12c)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Fernando M. Maresca
Monitoring Station S.A.
48 n0 812 La Plata - BA - ARG
Tel/Fax: (54) 221 425 3355
Return-Path: <AWilisch at Shadowrealms.cc>
Delivered-To: samba at lists.samba.org
Received: from voyager (unknown [63.88.150.228]) by lists.samba.org
(Postfix) with ESMTP id 52C5A4E72 for <samba at lists.samba.org>; Wed, 13
Jun 2001 07:08:24 -0700 (PDT)
Received: from voyager ([127.0.0.1]) by voyager with Microsoft
SMTPSVC(5.0.2195.2966); Wed, 13 Jun 2001 10:06:28 -0400
Reply-To: <AWilisch at Shadowrealms.cc>
From: "Aric C. Wilisch" <AWilisch at Shadowrealms.cc>
To: <samba at lists.samba.org>
Subject: RE: Windows XP connecting to SAMBA 2.2
Date: Wed, 13 Jun 2001 10:06:28 -0400
Message-ID: <000101c0f412$0a237b20$fac98cc6 at voyager>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0)
In-Reply-To: <sb270f98.043 at NWPRM12.THIOKOL.COM>
X-OriginalArrivalTime: 13 Jun 2001 14:06:28.0486 (UTC)
FILETIME=[0A3EF260:01C0F412]
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Make sure that you have your samba server set to encript passwords. NT Sp6
and higher (including everything based on NT like Win2k and Xp) requires
this setting. Being on seperate domains shouldn't matter as long as your
username and password are the same on both domains.
--Aric
-----Original Message-----
From: samba-admin at lists.samba.org [mailto:samba-admin at lists.samba.org]On
Behalf Of Dave Peat
Sent: Wednesday, June 13, 2001 9:00 AM
To: samba at lists.samba.org
Subject: Re: Windows XP connecting to SAMBA 2.2
Also,
The Windows XP machine and the SAMBA (Linux) machine are in different
domains.
On another Server (SUN Solaris 7) with SAMBA 2.0.7 with both machines
being in the same domain, I can map a drive to the SAMBA shares.
>>> "Dave Peat" <Dave.Peat at THIOKOL.COM> 06/13/01 06:26AM >>>
Hello,
I'm doing some testing with Windows XP beta 2 (build 2462) and I have
a
Mandrake Linux 8.0 server set up with SAMBA 2.2.0. I can connect to
the
share from Windows NT SP 6a and Windows 98. When I attempt to connect
to it from Windows XP (I can see the server) it asks for a User name &
password. No matter how I attempt to log in, it will not let me
connect. Has anyone else seen this problem?
Thanks,
Dave
Registered Linux User #184784
BEGIN:VCARD
VERSION:2.1
X-GWTYPE:USER
FN:Peat, Dave
EMAIL;WORK;PREF;NGW:Dave.Peat at THIOKOL.COM
ORG:;N410
N:Peat;Dave
TEL;WORK:(435)863-4105
TITLE:31257
END:VCARD
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
BEGIN:VCARD
VERSION:2.1
X-GWTYPE:USER
FN:Peat, Dave
EMAIL;WORK;PREF;NGW:Dave.Peat at THIOKOL.COM
ORG:;N410
N:Peat;Dave
TEL;WORK:(435)863-4105
TITLE:31257
END:VCARD
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <Administrator at josims.com>
Delivered-To: samba at lists.samba.org
Received: from core.josims.com (core.josims.com [195.89.188.194]) by
lists.samba.org (Postfix) with ESMTP id 50E954224 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 07:16:34 -0700 (PDT)
Received: by CORE with Internet Mail Service (5.5.2650.21) id
<MK1ZDJAT>; Wed, 13 Jun 2001 15:16:09 +0100
Message-ID: <C2ADBF38E1F4D3118F9F0060082151A501F672 at CORE>
From: Andrew Lyon <Administrator at josims.com>
To: "'samba at lists.samba.org'" <samba at lists.samba.org>
Subject: 2 problems that I have fixed in samba 2.2 rpm for redhat 6.2
Date: Wed, 13 Jun 2001 15:16:08 +0100
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2650.21)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
While installing samba-2.2.0-20010417.i386.rpm on redhat 6.2 I got the
following errors:
Installing stack version of /etc/pam.d/samba...
mv: /etc/samba/samba.stack: No such file or directory
Obviously the stack file is missing, I found it in
packaging/RedHat/samba.pamd.stack from the 2.2.0 tarball, and copied it to
/etc/samba/samba.stack, ran the install again and it worked fine.
Then I tried to access swat and got a server error, telnet to port 901
revealed the following problem:
<HTML><HEAD><TITLE>400 Server Error</TITLE></HEAD><BODY><H1>400 Server
Error</H1>chdir failed - the server is not configured
correctly<p></BODY></HTML>
Connection closed by foreign host.
I straced the swat binary and found that it was failing to open
/usr/share/samba/swat, a little looking around revealed that the folder was
infact /usr/share/swat, I created /usr/share/samba/swat and copied the
contents of /usr/share/swat into there and now swat works fine.
These problems dont look all that serious to me, and I've not run into
anything else so far, but I'm sure a newbie to linux would have given up!
Has anybody else found or fixed any problems in
samba-2.2.0-20010417.i386.rpm for redhat 6.2? Is there any way I can submit
my fixes to the developers?
Regards
Andrew Lyon
IT Manager
J.O. Sims Ltd
************************************************************
Registered Office:
J.O. Sims Ltd
Pudding Lane
Pinchbeck
Spalding
Lincs
PE11 3TJ
Company reg No: 2084187 Vat reg No: GB 437 4621 47
Tel: +44 (0) 1775 842100
Fax: +44 (0) 1775 842101
Web: www.josims.com
Email: enquiries at josims.com
************************************************************
The information contained in this e-mail is confidential
and is intended for the addressee only. The contents of
this e-mail must not be disclosed or copied without the
sender's consent. If you are not the intended recipient of
the message, please notify the sender immediately, and
delete the message.
The statements and opinions expressed in this message are
those of the author and do not necessarily reflect those
of the company. No commitment may be inferred from the
contents unless explicitly stated. The company does not
take any responsibility for the personal views of the
author.
This message has been scanned for viruses before sending,
but the company does not accept any responsibility for
infection and recommends that you scan any attachments.
************************************************************
Return-Path: <aandrews at eng.okla.seagate.com>
Delivered-To: samba at lists.samba.org
Received: from gwextclu.seagate.com (gwextclu.seagate.com
[204.160.183.18]) by lists.samba.org (Postfix) with SMTP id EBE664397
for <samba at lists.samba.org>; Wed, 13 Jun 2001 07:16:46 -0700 (PDT)
Received: from 172.18.17.4 by gwextclu.seagate.com with ESMTP ( (MMS
v4.7)); Wed, 13 Jun 2001 07:16:20 -0700
X-Server-Uuid: 1569d162-b3be-4edd-8d78-ab9187b54f11
Received: from auth0.it.stsj.seagate.com (auth0.it.stsj.seagate.com
[192.168.109.16]) by seastamp.seagate.com (8.11.2/8.11.2) with ESMTP
id f5DEGLx20208; Wed, 13 Jun 2001 14:16:21 GMT
Received: from ocosdrc01.eng.okla.seagate.com (
host-10-9-7-65.okla.seagate.com [10.9.7.65] (may be forged)) by
auth0.it.stsj.seagate.com with ESMTP id OAA16456; Wed, 13 Jun 2001 14:
16:20 GMT
Received: from sdrc30 by ocosdrc01.eng.okla.seagate.com (
8.9.3+Sun/SMI-SVR4) id JAA19476; Wed, 13 Jun 2001 09:15:30 -0500 (CDT)
Message-ID: <200106131415.JAA19476 at ocosdrc01.eng.okla.seagate.com>
Date: Wed, 13 Jun 2001 09:15:28 -0500 (CDT)
From: "Arnold Andrews X-324-4292" <aandrews at eng.okla.seagate.com>
Reply-To: "Arnold Andrews X-324-4292" <aandrews at eng.okla.seagate.com>
Subject: Re: Password Change Procedures
To: mhkohne at discordia.org
Cc: marion.haines at countygovt.brevard.fl.us, samba at lists.samba.org
MIME-Version: 1.0
X-Mailer: dtmail 1.3.0 @(#)CDE Version 1.4.2 SunOS 5.8 sun4u sparc
X-WSS-ID: 1739AA3E2824656-01-01
Content-Type: text/plain; charset=us-ascii
Content-MD5: 8C9sUkNAgpRmYbMIE7qesw==
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
> ># Samba config file created using SWAT
> ># Date: 2001/06/11 12:48:11
> >
> ># Global parameters
> >[global]
> >workgroup = STGROUP
> >netbios name = SMBSVR
> >
> >encrypt passwords = Yes
> >min password length = 6
> >smb passwd file = /usr/local/samba/private/smbpasswd
> >passwd program = /usr/bin/passwd %u
> >passwd chat = *new*password* %n\n *new*password* %n\n *updated*
> >password level = 20
> >username level = 10
> >unix password sync = Yes
> >
> >socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
> >domain logons = Yes
> >os level = 65
> >preferred master = Yes
> >domain master = Yes
> >dns proxy = No
> >wins support = Yes
> >
> >When I add a new user, I provide them an initial password and they login
> >and get to their shares without problem. They can also Telnet to the
> >Samba server, login to Linux, and use their home directory just fine. I
> >would then like them to change that initial password to a password of
> >their choosing. I can't find any reference to the steps that a Windows
> >user must follow to change passwords from the Windows PC.
> >
> >What I need to know, to help troubleshoot my particular situation, are the
> >exact steps a Win95 user would need to take to have all passwords
> >(Samba/Windows/UNIX) the same (i.e. run program abc, then do xyz at the
> >Samba server, run applet so-and-so in Control Panel, etc, etc). Assume
> >that Win95 has been patched to use encrypted passwords.
> >
> >Again, thank you very much for all the help provided so far.
> >
> >Marion D. Haines
> >marion.haines at countygovt.brevard.fl.us
> >Network Administrator
> >Board of County Commissioners
> >Brevard County, Florida
> >
> >=============================
> >--
> >To unsubscribe from this list go to the following URL and read the
> >instructions: http://lists.samba.org/mailman/listinfo/samba
>
> I'm curious about this issue myself, as I'd like to get folks on my network
> to change passwords on a regular basis.
>
> A couple of quick searches on the MS support database don't turn up a lot,
> except that there is a passwords control panel under windows 9X (at least,
> I only have one 9X box here to look at).
>
> Win 2K has a 'users and passwords' control panel.
>
> Interestingly, I found this link:
> http://www.ita.doc.gov/ita_admin/lan_help/how_to_change_your_network_passw.htm
>
> which is someone's internal instructions on password changes under 95. It
> indicates that, at least for Novell Networks, 95 can change passwords via
> the 'other passwords' dialog.
>
> I just poked at my 98 box here and couldn't get that button to be active,
> but I've never tried setting up my Samba server to do password changes,
> either.
>
>
>
> Interesting bits from the samba mailing list archive:
>
> http://marc.theaimsgroup.com/?l=samba&m=95325556226928&w=2
>
> That fellow seems to have had luck using the windows password change. I
> just tried that, and it doesn't work for me, but then again, I've not
> fiddled the server to try to get it to work correctly.
>
> Possibly the system has to be setup for windows login or something.
>
> I'd play with that control panel & see what happens in the samba logs.
>
>
> Michael Kohne mhkohne at discordia.org
> 3000 lbs of wood, 300 foot per minute - DO NOT get in the way.
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
>
To be able to change the password from a 95/98 box, you need to access the
properties for the "Microsoft networking client" under network neighborhood
properties and be sure that the check box for "logon to domain" is checked.
Also be sure to have the correct domain name listed, not only in that form, but
also in the "workgroup" section of the identification tab. You will then be
able to use the "passwords" control panel, to select the "Microsoft networking"
password.
Good luck,
Arnold Andrews
Return-Path: <Dave.Peat at THIOKOL.COM>
Delivered-To: samba at lists.samba.org
Received: from NWPRM12.THIOKOL.COM (gw2zz.thiokol.com [209.37.209.131])
by lists.samba.org (Postfix) with SMTP id BC3F946DE for
<samba at lists.samba.org>; Wed, 13 Jun 2001 07:25:21 -0700 (PDT)
Received: from THIOKOL-Message_Server by NWPRM12.THIOKOL.COM with
Novell_GroupWise; Wed, 13 Jun 2001 08:25:08 -0600
Message-Id: <sb272364.026 at NWPRM12.THIOKOL.COM>
X-Mailer: Novell GroupWise Internet Agent 5.5.3.1
Date: Wed, 13 Jun 2001 08:24:45 -0600
From: "Dave Peat" <Dave.Peat at THIOKOL.COM>
To: <samba at lists.samba.org>
Subject: RE: Windows XP connecting to SAMBA 2.2
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Converted-To-Plain-Text: from multipart/mixed by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I have just set my NT 4.0 SP 6a machine up to dual boot WindowsXP. From
the NT4 side, I can connect fine, even thought I have different
passwords and different domains. The userids are the same.
Thanks for the suggestions though...
>>> "Aric C. Wilisch" <AWilisch at Shadowrealms.cc> 06/13/01 08:06AM >>>
Make sure that you have your samba server set to encript passwords. NT
Sp6
and higher (including everything based on NT like Win2k and Xp)
requires
this setting. Being on seperate domains shouldn't matter as long as
your
username and password are the same on both domains.
--Aric
-----Original Message-----
From: samba-admin at lists.samba.org
[mailto:samba-admin at lists.samba.org]On
Behalf Of Dave Peat
Sent: Wednesday, June 13, 2001 9:00 AM
To: samba at lists.samba.org
Subject: Re: Windows XP connecting to SAMBA 2.2
Also,
The Windows XP machine and the SAMBA (Linux) machine are in different
domains.
On another Server (SUN Solaris 7) with SAMBA 2.0.7 with both machines
being in the same domain, I can map a drive to the SAMBA shares.
>>> "Dave Peat" <Dave.Peat at THIOKOL.COM> 06/13/01 06:26AM >>>
Hello,
I'm doing some testing with Windows XP beta 2 (build 2462) and I have
a
Mandrake Linux 8.0 server set up with SAMBA 2.2.0. I can connect to
the
share from Windows NT SP 6a and Windows 98. When I attempt to connect
to it from Windows XP (I can see the server) it asks for a User name &
password. No matter how I attempt to log in, it will not let me
connect. Has anyone else seen this problem?
Thanks,
Dave
Registered Linux User #184784
BEGIN:VCARD
VERSION:2.1
X-GWTYPE:USER
FN:Peat, Dave
EMAIL;WORK;PREF;NGW:Dave.Peat at THIOKOL.COM
ORG:;N410
N:Peat;Dave
TEL;WORK:(435)863-4105
TITLE:31257
END:VCARD
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
BEGIN:VCARD
VERSION:2.1
X-GWTYPE:USER
FN:Peat, Dave
EMAIL;WORK;PREF;NGW:Dave.Peat at THIOKOL.COM
ORG:;N410
N:Peat;Dave
TEL;WORK:(435)863-4105
TITLE:31257
END:VCARD
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
BEGIN:VCARD
VERSION:2.1
X-GWTYPE:USER
FN:Peat, Dave
EMAIL;WORK;PREF;NGW:Dave.Peat at THIOKOL.COM
X-GWUSERID:PEATDA
ORG:;N410
N:Peat;Dave
TEL;WORK:(435)863-4105
TITLE:31257
END:VCARD
Return-Path: <don_mccall at hp.com>
Delivered-To: samba at lists.samba.org
Received: from palrel1.hp.com (palrel1.hp.com [156.153.255.242]) by
lists.samba.org (Postfix) with ESMTP id 45C954600 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 07:32:28 -0700 (PDT)
Received: from xparelay1.corp.hp.com (unknown [15.58.136.173]) by
palrel1.hp.com (Postfix) with ESMTP id A900432D; Wed, 13 Jun 2001
07:32:07 -0700 (PDT)
Received: from xpabh1.corp.hp.com (xpabh1.corp.hp.com [15.58.136.191])
by xparelay1.corp.hp.com (Postfix) with ESMTP id 1A3651F50D; Wed, 13
Jun 2001 01:29:06 -0700 (PDT)
Received: by xpabh1.corp.hp.com with Internet Mail Service (5.5.2653.19)
id <MZ6B2MRH>; Wed, 13 Jun 2001 07:31:58 -0700
Message-ID: <079FD72E42C9D311B854009027650E6F04050ABB at xatl02.atl.hp.com>
From: "MCCALL,DON (HP-USA,ex1)" <don_mccall at hp.com>
To: "'alexander.skwar at delphiauto.com'" <alexander.skwar at delphiauto.com>,
becker at lufa-sp.vdlufa.de
Cc: Craig Kelley <ink at inconnu.isu.edu>, samba at lists.samba.org
Subject: RE: Windows 95 clients cannot connect (Wins Server)
Date: Wed, 13 Jun 2001 07:31:56 -0700
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
It doesn't really matter WHERE you put the wins server, as long as ALL of
your clients and Servers have a route to the ipaddress of the wins server.
That's the point ;-> you configure each of your clients and servers to USE
the wins server at whatever ip address it lives at, and when the
clients/servers come up, they go directly to that ip address to register
their netbios names and ip addresses. And when the clients need to RESOLVE
a netbios name, they ask that same wins server for the ipaddress associated
with that name. So everybody's consulting the same 'authority'.
Hope this helps,
Don
-----Original Message-----
From: alexander.skwar at delphiauto.com
[mailto:alexander.skwar at delphiauto.com]
Sent: Wednesday, June 13, 2001 7:48 AM
To: becker at lufa-sp.vdlufa.de
Cc: Craig Kelley; samba at lists.samba.org
Subject: RE: Windows 95 clients cannot connect (Wins Server)
On 13.06.2001 12:22:11 Stefan Becker wrote:
> Windows' browser lists are maintained by NetBios broadcasts
> that are NOT transported across a routed network.
Okay, thanks. Do I understand that correctly, that, if I don't care at all
about being able to browse the Network Neighborhood <sp?>, I also do not
need a
WINS server?
The servers that I can control are all on one segment. However, the clients
are
all on another segment. To complicate it further, the clients are all
connected
to some hubs. These hubs are bundled and then connected to a switch. And
again
the connection is bundled and the connection goes to yet another switch:
--------
- CL 1 - --\
-------- |
|
-------- |
- CL 2 - --+--\
-------- | |
| | /---\ /---\ --------
-------- | | | S | | S | /-- - SV A -
- CL 3 - --/ | | W | | W | | --------
-------- \-+ I | | I +-/
| T +--+ T |
/-+ C | | C +-\
-------- | | H | | H | | --------
- CL A - -----+ \---/ \---/ \-- - SV B -
-------- | --------
|
-------- |
- CL B - -----/
--------
- In this diagram, the '+' are hubs
- CL 1, CL 2, CL 3, CL A and CL B are Clients
- SV 1 and SV 2 are Servers
( Turn on a font like Courier to 'enjoy' the ASCII art )
As you can (?) see, that's really a segmented network. The switches are
CISCO
switches.
Now, where should I install a WINS Server?
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <bhelms at nicusa.com>
Delivered-To: samba at lists.samba.org
Received: from intranet.nol.org (intranet.stateinfo.com
[206.222.217.51]) by lists.samba.org (Postfix) with ESMTP id 15BCE447A
for <samba at lists.samba.org>; Wed, 13 Jun 2001 07:39:29 -0700 (PDT)
Received: from powder ([208.132.61.3]) by intranet.nol.org (8.9.3/8.9.3)
with SMTP id JAA28703 for <samba at lists.samba.org>; Wed, 13 Jun 2001
09:38:58 -0500
Content-Type: text/plain; charset="iso-8859-1"
From: "Benny D. Helms" <bhelms at nicusa.com>
Reply-To: bhelms at nicusa.com
To: samba at lists.samba.org
Subject: W2K semaphores revisited
Date: Wed, 13 Jun 2001 08:37:23 -0600
X-Mailer: KMail [version 1.2]
MIME-Version: 1.0
Message-Id: <01061308372300.12889 at powder>
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Thanks to Jon Gerdes, I was able to resolve the 10000 files issue. But the
semaphore timeout issue remains.
Basically, I have users on W2K connecting to a Linux Samba box. They are
mounting their home folders via drive mapping. What happens is that they log
off at night, come back the next morning, and when they log in, the drive
will no longer map. The error is that the semaphores have timed out.
Restarting the W2K boxes does not help. Oddly, if the user goes into network
neighborhood, and selects the Samba box, then works his way through the
shares and folders until he has reached his home folder, he can THEN go and
map the drive with no errors. Almost as though the computer had to be shown
the way.
I saw the following in the Samba log for one of my users:
[2001/06/13 00:55:35, 0] lib/util_sock.c:write_socket_data(540)
write_socket_data: write failure. Error = Broken pipe
[2001/06/13 00:55:35, 0] lib/util_sock.c:write_socket(566)
write_socket: Error writing 4 bytes to socket 6: ERRNO = Broken pipe
[2001/06/13 00:55:35, 0] lib/util_sock.c:send_smb(754)
Error writing 4 bytes to client. -1. Exiting
This error was being logged approximately every 30 minutes. As a result of
this error set, I surmised that the Samba box was not aware that the user had
logged off of the network and was trying all night long to reestablish
communication, and that this was causing the timeout. So last night, I asked
the user to manually reach out and unmap the drive before logging off and
going home. He did so, and as a result, easily re-mapped the drive this
morning. However, the log segment above is from last night, AFTER he had
unmapped the drive AND logged off of the network. So why is Samba trying to
contact this machine all night long? What is failing to happen here to let
the Samba server know the user is no longer attempting to access the
services? And what is truly causing these semaphore timeout errors? Is it
Samba, or is it W2K?
Your help in resolving this issue would be greatly appreciated,
Benny D. Helms
Senior Unix SysAdmin
bhelms at nicusa.com
Return-Path: <Administrator at josims.com>
Delivered-To: samba at lists.samba.org
Received: from core.josims.com (core.josims.com [195.89.188.194]) by
lists.samba.org (Postfix) with ESMTP id ED6894227 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 08:06:49 -0700 (PDT)
Received: by CORE with Internet Mail Service (5.5.2650.21) id
<MK1ZDJB5>; Wed, 13 Jun 2001 16:06:24 +0100
Message-ID: <C2ADBF38E1F4D3118F9F0060082151A501F674 at CORE>
From: Andrew Lyon <Administrator at josims.com>
To: "'samba at lists.samba.org'" <samba at lists.samba.org>
Subject: samba with DOMAIN security?
Date: Wed, 13 Jun 2001 16:06:23 +0100
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2650.21)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
I've been trying to get samba working with DOMAIN security but I am getting
nowhere, all I want is for user Administrator in domain Engineering to be
able to access //LinuxServer/root which is / on the LinuxServer, I've been
reading the doc's for 2 days and I'm sure ive done most things right, is
there any more howto's or help available?
Andy
************************************************************
Registered Office:
J.O. Sims Ltd
Pudding Lane
Pinchbeck
Spalding
Lincs
PE11 3TJ
Company reg No: 2084187 Vat reg No: GB 437 4621 47
Tel: +44 (0) 1775 842100
Fax: +44 (0) 1775 842101
Web: www.josims.com
Email: enquiries at josims.com
************************************************************
The information contained in this e-mail is confidential
and is intended for the addressee only. The contents of
this e-mail must not be disclosed or copied without the
sender's consent. If you are not the intended recipient of
the message, please notify the sender immediately, and
delete the message.
The statements and opinions expressed in this message are
those of the author and do not necessarily reflect those
of the company. No commitment may be inferred from the
contents unless explicitly stated. The company does not
take any responsibility for the personal views of the
author.
This message has been scanned for viruses before sending,
but the company does not accept any responsibility for
infection and recommends that you scan any attachments.
************************************************************
Return-Path: <mhkohne at discordia.org>
Delivered-To: samba at lists.samba.org
Received: from techno.discordia.org (techno.discordia.org
[207.8.224.10]) by lists.samba.org (Postfix) with ESMTP id 308D3457A
for <samba at lists.samba.org>; Wed, 13 Jun 2001 08:40:39 -0700 (PDT)
Received: from kohnelap.discordia.org (techno.discordia.org
[207.8.224.10]) by techno.discordia.org (8.11.0/8.9.3) with ESMTP id
f5DFe9w00708; Wed, 13 Jun 2001 11:40:10 -0400
Message-Id: <5.1.0.14.2.20010613113041.00aa80e8 at 127.0.0.1>
X-Sender: mhkohne at 127.0.0.1
X-Mailer: QUALCOMM Windows Eudora Version 5.1
Date: Wed, 13 Jun 2001 11:31:55 -0400
To: "Arnold Andrews X-324-4292" <aandrews at eng.okla.seagate.com>
From: Michael Kohne <mhkohne at discordia.org>
Subject: Re: Password Change Procedures
Cc: marion.haines at countygovt.brevard.fl.us, samba at lists.samba.org
In-Reply-To: <200106131415.JAA19476 at ocosdrc01.eng.okla.seagate.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
At 09:15 AM 6/13/2001 -0500, Arnold Andrews X-324-4292 wrote:
> > ># Samba config file created using SWAT
> > ># Date: 2001/06/11 12:48:11
> > >
> > ># Global parameters
> > >[global]
> > >workgroup = STGROUP
> > >netbios name = SMBSVR
> > >
> > >encrypt passwords = Yes
> > >min password length = 6
> > >smb passwd file = /usr/local/samba/private/smbpasswd
> > >passwd program = /usr/bin/passwd %u
> > >passwd chat = *new*password* %n\n *new*password* %n\n *updated*
> > >password level = 20
> > >username level = 10
> > >unix password sync = Yes
> > >
> > >socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
> > >domain logons = Yes
> > >os level = 65
> > >preferred master = Yes
> > >domain master = Yes
> > >dns proxy = No
> > >wins support = Yes
> > >
> > >When I add a new user, I provide them an initial password and they login
> > >and get to their shares without problem. They can also Telnet to the
> > >Samba server, login to Linux, and use their home directory just fine. I
> > >would then like them to change that initial password to a password of
> > >their choosing. I can't find any reference to the steps that a Windows
> > >user must follow to change passwords from the Windows PC.
> > >
> > >What I need to know, to help troubleshoot my particular situation, are
> the
> > >exact steps a Win95 user would need to take to have all passwords
> > >(Samba/Windows/UNIX) the same (i.e. run program abc, then do xyz at the
> > >Samba server, run applet so-and-so in Control Panel, etc, etc). Assume
> > >that Win95 has been patched to use encrypted passwords.
> > >
> > >Again, thank you very much for all the help provided so far.
> > >
> > >Marion D. Haines
> > >marion.haines at countygovt.brevard.fl.us
> > >Network Administrator
> > >Board of County Commissioners
> > >Brevard County, Florida
> > >
> > >=============================
> > >--
> > >To unsubscribe from this list go to the following URL and read the
> > >instructions: http://lists.samba.org/mailman/listinfo/samba
> >
> > I'm curious about this issue myself, as I'd like to get folks on my
> network
> > to change passwords on a regular basis.
> >
> > A couple of quick searches on the MS support database don't turn up a lot,
> > except that there is a passwords control panel under windows 9X (at least,
> > I only have one 9X box here to look at).
> >
> > Win 2K has a 'users and passwords' control panel.
> >
> > Interestingly, I found this link:
> >
> http://www.ita.doc.gov/ita_admin/lan_help/how_to_change_your_network_passw.htm
> >
> > which is someone's internal instructions on password changes under 95. It
> > indicates that, at least for Novell Networks, 95 can change passwords via
> > the 'other passwords' dialog.
> >
> > I just poked at my 98 box here and couldn't get that button to be active,
> > but I've never tried setting up my Samba server to do password changes,
> > either.
> >
> >
> >
> > Interesting bits from the samba mailing list archive:
> >
> > http://marc.theaimsgroup.com/?l=samba&m=95325556226928&w=2
> >
> > That fellow seems to have had luck using the windows password change. I
> > just tried that, and it doesn't work for me, but then again, I've not
> > fiddled the server to try to get it to work correctly.
> >
> > Possibly the system has to be setup for windows login or something.
> >
> > I'd play with that control panel & see what happens in the samba logs.
> >
> >
> > Michael Kohne mhkohne at discordia.org
> > 3000 lbs of wood, 300 foot per minute - DO NOT get in the way.
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions: http://lists.samba.org/mailman/listinfo/samba
> >
>
>To be able to change the password from a 95/98 box, you need to access the
>properties for the "Microsoft networking client" under network neighborhood
>properties and be sure that the check box for "logon to domain" is checked.
>Also be sure to have the correct domain name listed, not only in that
>form, but
>also in the "workgroup" section of the identification tab. You will then be
>able to use the "passwords" control panel, to select the "Microsoft
>networking"
>password.
>
>Good luck,
>
>Arnold Andrews
Does that mean that you can only use win 9x to change passwords if you have
a domain configured? I for one don't have a domain configured (I use a
workgroup instead) and I don't really want to set one up.
Thanks!
Michael Kohne mhkohne at discordia.org
3000 lbs of wood, 300 foot per minute - DO NOT get in the way.
Return-Path: <tdiehl at pil.net>
Delivered-To: samba at samba.org
Received: from richard2.pil.net (richard2.pil.net [207.8.164.9]) by
lists.samba.org (Postfix) with SMTP id D1865457A for
<samba at samba.org>; Wed, 13 Jun 2001 08:56:29 -0700 (PDT)
Received: (qmail 89303 invoked from network); 13 Jun 2001 15:56:02 -0000
Received: from dsl-64-34-35-93.telocity.com (HELO kanga.cableline.com)
(64.34.35.93) by richard2.pil.net with SMTP; 13 Jun 2001 15:56:02
-0000
Received: by kanga.cableline.com (Postfix, from userid 508) id
9A48911804; Wed, 13 Jun 2001 11:56:08 -0400 (EDT)
Received: from localhost (localhost [127.0.0.1]) by kanga.cableline.com
(Postfix) with ESMTP id 85FE912805; Wed, 13 Jun 2001 11:56:08 -0400
(EDT)
Date: Wed, 13 Jun 2001 11:56:08 -0400 (EDT)
From: Tom Diehl <tdiehl at pil.net>
X-X-Sender: <tdiehl at localhost.localdomain>
To: <naughton at domino.danielwoodhead.com>
Cc: <samba at samba.org>
Subject: Re: 2.2.0 binaries for redhat 7.1
Message-ID: <Pine.LNX.4.33.0106131149090.1437-100000 at localhost.localdoma
in>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Tue, 12 Jun 2001 naughton at domino.danielwoodhead.com wrote:
> Does anyone know a location for 2.2.0 binaries (rpms) for redhat 7.1. I've
> checked the usual places: rpmfind.net has some rawhide versions without the
> platform specified with some readline depency problems, samba.org has some
> for 7.0 - nothing for 7.1. Any pointers would be appreciated. Thanks
I have been told that the rawhide rpms from redhat will work with the readline
packages from rawhide also. Redhat has not released official rpms yet. I
suspect that they will wait for 2.2 to stabilize a littlt b4 doing so.
IOW: there are NO specific 7.1 rpms. The 7.0 rpms should work.
HTH,
--
......Tom INCOMPETIANCE: When You Earnestly Believe You Can
tdiehl at pil.net Compensate for a Lack of Skill by Doubling Your
Efforts, There's No End to What You Can't Do.
Return-Path: <sobowao2000 at yahoo.co.uk>
Delivered-To: samba at samba.org
Received: from web9502.mail.yahoo.com (web9502.mail.yahoo.com
[216.136.129.132]) by lists.samba.org (Postfix) with SMTP id 6EE894655
for <samba at samba.org>; Wed, 13 Jun 2001 09:01:22 -0700 (PDT)
Message-ID: <20010613160058.82397.qmail at web9502.mail.yahoo.com>
Received: from [136.148.1.94] by web9502.mail.yahoo.com; Wed, 13 Jun
2001 17:00:58 BST
Date: Wed, 13 Jun 2001 17:00:58 +0100 (BST)
From: =?iso-8859-1?q?olukemi=20sobowale?= <sobowao2000 at yahoo.co.uk>
Subject: Enquiry
To: samba at samba.org
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Please l am writing a project on Integration and and
management of Win NT and Unix looking at a package
called 'Samba' which apparently manages common
unix/NT passwords, on the control of users access,
creating of user's account and domains, grouping
users, file security, file permissions, removing
users,
controlling user profiles, monitoring and
troubleshooting.
My major problem is how to approach this project.
Can anyone please help me out.
l have managed to check the samba.org site but it
consist of too much information that l just got lost
as to what to do.
____________________________________________________________
Do You Yahoo!?
Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
or your free @yahoo.ie address at http://mail.yahoo.ie
Return-Path: <ink at inconnu.isu.edu>
Delivered-To: samba at samba.org
Received: from inconnu.isu.edu (inconnu.isu.edu [134.50.8.55]) by
lists.samba.org (Postfix) with ESMTP id 6CFBB4C13 for
<samba at samba.org>; Wed, 13 Jun 2001 09:11:45 -0700 (PDT)
Received: from localhost (ink at localhost) by inconnu.isu.edu
(8.9.3/8.9.3) with ESMTP id KAA08400; Wed, 13 Jun 2001 10:11:16 -0600
Date: Wed, 13 Jun 2001 10:11:16 -0600 (MDT)
From: Craig Kelley <ink at inconnu.isu.edu>
To: Vladuta Cristian <VladutaC at ca-ib.com>
Cc: Samba <samba at samba.org>
Subject: RE: Mapping samba shares takes too long !?
In-Reply-To: <F131C3737223D111962300805F0DD08F3CF5F8 at buh-cs0.ca-ib.com>
Message-ID: <Pine.LNX.4.32.0106131009590.8079-100000 at inconnu.isu.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Wed, 13 Jun 2001, Vladuta Cristian wrote:
> Thanks Craig,
>
> I am running an NT WINS and an NT DHCP server. How do I point the Samba
> Server to the same Wins? It's related to samba.conf?
> Nevertheless I thought that adding Samba as static mapping to the NT WINS
> would do.
That will do fine as well, but you should still say
wins support = no
wins server = 10.0.0.0 #or whatever the IP address of it is
in the smb.conf file.
--
It won't be long before the CPU is a card in a slot on your ATX videoboard
Craig Kelley -- kellcrai at isu.edu
http://www.isu.edu/~kellcrai finger ink at inconnu.isu.edu for PGP block
Return-Path: <d20k3 at chara.gsu.edu>
Delivered-To: samba at lists.samba.org
Received: from panther.Gsu.EDU (panther.gsu.edu [131.96.5.77]) by
lists.samba.org (Postfix) with ESMTP id 445884F5E for
<samba at lists.samba.org>; Wed, 13 Jun 2001 09:42:02 -0700 (PDT)
Received: from michael.phy-astr.gsu.edu
(IDENT:d20k3 at Michael.Phy-Astr.Gsu.EDU [131.96.4.10]) by
panther.Gsu.EDU (8.9.3/8.7.3) with ESMTP id MAA14649 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 12:41:37 -0400 (EDT)
Date: Wed, 13 Jun 2001 12:41:37 -0400 (EDT)
From: Duke Windsor <d20k3 at chara.gsu.edu>
X-Sender: d20k3 at localhost.localdomain
To: samba at lists.samba.org
Subject: user list and domain service
Message-ID: <Pine.LNX.4.21.0106131232140.12480-100000 at localhost.localdom
ain>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I am running Samba 2.2.x
I cannot seem to view the list of users when creating a
shared directory on Win98 when I am also Logging on to
a Win-NT domain (for passwd verification at login).
If I have the Netbios name and workgroup name the same
in the smb.conf, and do not enable 'Logon to Windows NT
domain' on the Win98 box, then I do see the user list.
I cannot logon to the NT domain with the netbios and
workgroup names the same. If I change the names, re-
configure the WIN98 box, and still do not use NT domains,
I will not see the user list.
What's going on? I need the user passwd verification at
logon and to see the user list when creating shares. I
would appreciate some help. Thanks
-Duke
--
Charles C. Windsor | ph: 404-651-2279
Georgia State University | fax: 404-651-1427
Physics & Astronomy | email: cwindsor at gsu.edu
Return-Path: <smccomas at picoscript.com>
Delivered-To: samba at lists.samba.org
Received: from brightman.siteprotect.com (brightman.siteprotect.com
[64.26.0.114]) by lists.samba.org (Postfix) with ESMTP id 4D64849BD
for <samba at lists.samba.org>; Wed, 13 Jun 2001 09:50:39 -0700 (PDT)
Received: from mail.picoscript.com
(adsl-64-123-223-27.dsl.hstntx.swbell.net [64.123.223.27]) by
brightman.siteprotect.com (8.9.3/8.9.3) with SMTP id LAA17490 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 11:50:14 -0500
Date: Wed, 13 Jun 2001 11:47:41 -0500
From: Stacey McComas <smccomas at picoscript.com>
To: samba at lists.samba.org
Subject: Problem with 2.2
Message-ID: <20010613114741.G1959 at smccomas>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
X-Mailer: Balsa 1.1.4
Lines: 57
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
A new problem has cropped up with my Samba2.2.0alpha3 installation (i was
waiting for 2.2.1 to upgrade...) on my RedHat 6.2 server.
I am running Samba as the PDC and fileserver for a network of ~7 Win2k Pro
machines. Everything has been working perfectly for 3 months, until today.
All of a sudden, it is taking some files an extremely long time to open (up
to 3 mintues), and these are not particularly large files. When the users
try to copy the files off of the file server an on to their local hard
drives, they get 1 of the following errors (the error switches between
these 2): "Cannot copy <filename>: Error performing inpage operation" or
"Cannot copy <filename>: The specified network name is no longer
available", and then the copy dies.
Like I said, we've been running *perfectly* for 3 months now, and I won't
have a chance to upgrade to the latest CVS until the weekend, so I'm hoping
there is another answer.
I have checked the logs, and they don't say anything particularly useful
that I can tell, but I'll email anybody a log who would like to take a look
(don't want to suck bandwidth). I have restarted Samba, the server, and
the win2k machines many times, and we're still having the problem.
Here's the Global section of my smb.conf:
[global]
workgroup = PICOSCRIPT
server string = Picoscript Samba Server
security = user
status = yes
encrypt passwords = yes
smb passwd file = /usr/local/samba/private/smbpasswd
domain logons = yes
add user script = /usr/bin/adduser -n -g machines -c Machine -d /dev/null
-s /bin/false %m$logon script = scripts\%U.bat
domain admin group = @wadmin
domain admin users = administrator root smccomas
wins support = yes
guest account = ftp
share modes = no
os level = 65
min password length = 4
lock directory = /usr/local/samba/var/locks
log level = 3
Any help is *greatly* appreciated!!!!!!!
Stacey
--
Stacey G. McComas
Dept Leader, Information Technology
picoScript
713-383-8101
mailto:smccomas at picoscript.com
Return-Path: <yan at cardinalengineering.com>
Delivered-To: samba at lists.samba.org
Received: from cardinalengineering.com (bftc5p68.islc.net
[63.71.113.68]) by lists.samba.org (Postfix) with ESMTP id 3BC544F8C
for <samba at lists.samba.org>; Wed, 13 Jun 2001 09:51:17 -0700 (PDT)
Received: (from mail at localhost) by cardinalengineering.com (8.9.3/8.9.3)
id MAA00713 for <samba at lists.samba.org>; Wed, 13 Jun 2001 12:50:52
-0400
X-Authentication-Warning: aphrodite.cardinal.lan: mail set sender to
<yan at cardinalengineering.com> using -f
X-Authentication-Warning: aphrodite.cardinal.lan: Processed from queue
/var/spool/mqpost-amavis
X-Authentication-Warning: aphrodite.cardinal.lan: Processed by mail with
-C /etc/sendmail.orig.cf
Received: from cardinalengineering.com (hamlet.cardinal.lan
[192.168.0.4]) by cardinalengineering.com (8.9.3/8.9.3) with ESMTP id
MAA00529; Wed, 13 Jun 2001 12:50:47 -0400
Message-ID: <3B2799E7.7030907 at cardinalengineering.com>
Date: Wed, 13 Jun 2001 12:50:47 -0400
From: Yan Seiner <yan at cardinalengineering.com>
Organization: Cardinal Engineering, Inc.
User-Agent: Mozilla/5.0 (X11; U; Linux 2.2.17intl i686; en-US; rv:0.9.1)
Gecko/20010608
X-Accept-Language: en-us
MIME-Version: 1.0
To: Andrew Bartlett <abartlet at pcug.org.au>
Cc: samba at lists.samba.org
Subject: Re: samba + NIS
References: <3B274AFA.8010704 at cardinalengineering.com>
<3B2765FC.71E2DB37 at bartlett.house>
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
X-AntiVirus: scanned for viruses by AMaViS 0.2.1 (http://amavis.org/)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Andrew:
My setup is like this:
+----- office 1
Main server ----+----- office 2
+----- office 3
Changes made to files at any of these locations are propagated back to
the main server every night. The remote offices use vpn over dial-up,
so real-time authentication back to the main is not practical.
The way I understand NIS, the maps are pushed on demand from the main
server, which is what I want.
Each office is set up as a stand-alone samba server. The only time the
main server is accessed is for a new DNS query (the remotes use caching
only name servers) and for time sync.
I want to make sure that users are synchronized and that they have the
same UID/GID on all servers.
My clients are win98/winME boxes.
I'm not sure how security=server would help me in this setup.
Thanks.
--Yan
Andrew Bartlett wrote:
> Yan Seiner wrote:
>
>>Is there a HOW-TO or a doc somewhere for setting up samba + NIS? I've
>>looked in the archives and on the web and couldn't find anything.
>>
>>I am considering NIS so that I can have the same users on my three
>>servers, so I would need to set up a master and two slaves. But how do
>>I get samba to use NIS for smbpasswd? Or am I missing something really
>>basic?
>>
>>I have been working with samba for a few years, but have never worked
>>with NIS, so this may be a very stupid question.
>>
>>
>
> Probably better to use secuirty=domain or secuirty=server, and do away
> with the need for the smbpasswd file. I run security=server and NIS
> here, and havn't noticed any problems.
>
> Andrew Bartlett
>
>
Return-Path: <jbenedet at unm.edu>
Delivered-To: samba at samba.org
Received: from linux06.unm.edu (linux06.unm.edu [129.24.15.38]) by
lists.samba.org (Postfix) with SMTP id EE53D4F8F for
<samba at samba.org>; Wed, 13 Jun 2001 09:59:06 -0700 (PDT)
Received: (qmail 3912 invoked by uid 124); 13 Jun 2001 16:58:25 -0000
Received: from jbenedet at unm.edu by linux06.unm.edu with
qmail-scanner-0.96 (. Clean. Processed in 0.015356 secs); 13 Jun 2001
16:58:25 -0000
Received: from bldg87-0053.unm.edu (129.24.204.111) by linux06.unm.edu
with SMTP; 13 Jun 2001 16:58:25 -0000
Date: Wed, 13 Jun 2001 10:50:26 -0600
From: John Benedetto <jbenedet at unm.edu>
To: olukemi sobowale <sobowao2000 at yahoo.co.uk>, samba at samba.org
Subject: Re: Enquiry
Message-ID: <291981544.992429426 at bldg87-0053.unm.edu>
In-Reply-To: <20010613160058.82397.qmail at web9502.mail.yahoo.com>
Originator-Info: login-token=Mulberry:01KyxxuJWO1iarkNs3Qt/dKm5+4zO0Wrnh
oA==
X-Mailer: Mulberry/2.0.5 (Win32)
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
The best approach would be to make a Linux box, instrall Samba, and
actually USE it. Also, as part of a Samba install an HTML version of the
O'Reilly book is installed. I _thought_ it was on the Samba site, but I
cannot find it.
If you have the money, buy a book. There are three excellent ones listed
under the "documentation" link on the Samba site that were written by
memebers of the Samba team (I have Richard Sharpe & Tim Potter's excellet
QUE book, and recommend it, though I am sure that any of the three listed
are great). There are others listed under the "books" link, same page as
the "documentation" link.
Samba can satisfy most user's requirements of an NT server, thus making it
so you don't even HAVE to have a Windows server to have a windows network.
Samba can also be set up to act as a member server in a Windows domain,
authenticating against the PDC & BDC NT servers.
Without knowing more exact information about your project, it's kind of
difficult to guide you in any better direction. This should be enough
information to set you in the right track.
There is also a white paper on the Microsoft site, that details Windows NT
& Unix interoperability; sorry I don't have the link, I just recall its'
existance, because I happened across the printout I made of it! That
_might_ be of some use to you, too.
Good luck with it!
- john
--On Wednesday, June 13, 2001 5:00 PM +0100 olukemi sobowale
<sobowao2000 at yahoo.co.uk> wrote:
> Please l am writing a project on Integration and and
> management of Win NT and Unix looking at a package
> called 'Samba' which apparently manages common
> unix/NT passwords, on the control of users access,
> creating of user's account and domains, grouping
> users, file security, file permissions, removing
> users,
> controlling user profiles, monitoring and
> troubleshooting.
>
> My major problem is how to approach this project.
>
> Can anyone please help me out.
>
> l have managed to check the samba.org site but it
> consist of too much information that l just got lost
> as to what to do.
Return-Path: <jmcd at us.ibm.com>
Delivered-To: samba at lists.samba.org
Received: from e33.bld.us.ibm.com (e33.co.us.ibm.com [32.97.110.131]) by
lists.samba.org (Postfix) with ESMTP id 723494B31 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 10:20:31 -0700 (PDT)
Received: from westrelay02.boulder.ibm.com (westrelay02.boulder.ibm.com
[9.99.140.23]) by e33.bld.us.ibm.com (8.9.3/8.9.3) with ESMTP id
MAA65740 for <samba at lists.samba.org>; Wed, 13 Jun 2001 12:14:37 -0500
Received: from d03nm800.boulder.ibm.com (d03nm800.boulder.ibm.com
[9.17.187.101]) by westrelay02.boulder.ibm.com (8.11.1m3/NCO
v4.96.1.0) with ESMTP id f5DHK5247892 for <samba at lists.samba.org>;
Wed, 13 Jun 2001 11:20:05 -0600
From: "Jim McDonough" <jmcd at us.ibm.com>
Subject: Re: Windows XP connecting to SAMBA 2.2
To: samba at lists.samba.org
X-Mailer: Lotus Notes Release 5.0 March 30, 1999
Message-ID: <OF09658417.2D9AEEE6-ON87256A6A.005ECC1C at boulder.ibm.com>
Date: Wed, 13 Jun 2001 11:20:20 -0600
X-MIMETrack: Serialize by Router on D03NM800/03/M/IBM(Release 5.0.6
|December 14, 2000) at 06/13/2001 11:20:23 AM
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Also, try the latest CVS or wait for 2.2.1....
----------------------------
Jim McDonough
Linux Technology Center
IBM Boulder
Notes: Jim McDonough/Boulder/IBM @ IBMUS
VNET: JMCD at IBMUSM54
Internet: jmcd at us.ibm.com
Phone: (303) 924-5822
T/L: 263-5822
Return-Path: <wolfgang at noefs.ping.de>
Delivered-To: samba at lists.samba.org
Received: from noefs.ping.de (ping-ef-gw.ping.de [62.72.90.14]) by
lists.samba.org (Postfix) with ESMTP id CF9854FBE for
<samba at lists.samba.org>; Wed, 13 Jun 2001 10:23:25 -0700 (PDT)
Received: (from wolfgang at localhost) by noefs.ping.de (8.9.3/8.9.3) id
TAA17232 for samba at lists.samba.org; Wed, 13 Jun 2001 19:17:49 +0200
Message-Id: <200106131717.TAA17232 at noefs.ping.de>
Subject: Half encryption? :-)
To: samba at lists.samba.org
Date: Wed, 13 Jun 2001 19:17:40 +0200 (MEST)
From: Wolfgang Wegner <wolfgang at leila.ping.de>
X-Mailer: ELM [version 2.4ME+ PL60 (25)]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
sorry, I know there are many questions regarding problems with
the encryption, so here is another one.
I want to set up a print and file server running samba 2.0.9 on
suse 7.1 (should not matter), without password encryption. The
problem is, the clients (NT4 and W2k) require to connect to
the server once before printing is possible (i.e., "search
computer", double-click on the name, and just hit enter when
prompted for username/password).
So, there is no username and valid password necessary to access
the shares, the NT clients just seem not to realize this.
As soon as I enable the encrypted passwords on the server, this
works (but with other problems accessing the restricted shares,
of course).
Does anyone know what I could do about this?
I really did not find anything about this problem despite checking
for the correct setting of the password encryption on the client
side, but this is OK, as I can see when accessing the "normal"
(user-related and password-protected) shares.
Any help is highly appreciated!
Thanks,
Wolfgang
Return-Path: <eric_boucher60 at yahoo.com>
Delivered-To: samba at lists.samba.org
Received: from web9404.mail.yahoo.com (web9404.mail.yahoo.com
[216.136.129.110]) by lists.samba.org (Postfix) with SMTP id C3D074FAE
for <samba at lists.samba.org>; Wed, 13 Jun 2001 10:26:33 -0700 (PDT)
Message-ID: <20010613172609.49632.qmail at web9404.mail.yahoo.com>
Received: from [207.164.184.163] by web9404.mail.yahoo.com; Wed, 13 Jun
2001 10:26:09 PDT
Date: Wed, 13 Jun 2001 10:26:09 -0700 (PDT)
From: Eric Boucher <eric_boucher60 at yahoo.com>
Subject: No printers in the share list with smbclient
To: SAMBA <samba at lists.samba.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
I am trying to see all my printers onto the network
via the "smbclient -NL" client. I did the most simple
"smb.conf" file that I can do to see all my printers
but I don't see them. Here is my "smb.conf"
parameters:
[global]
...
...
printcap name = /etc/printcap
printing = bsd
...
...
[printers]
print ok = yes
path = /var/spool/samba
browseable = NO
load printers = yes
I am using samba on an SGI IRIX 6.5 box. All my share
files are OK. I can browse it with smbclient and
"network neighborhood" of windows. When I do a
"smbclient -NL my_server", in the "TYPE" section, I
have no printer, only "Disk" and "IPC" type. My
/etc/printcap file is ok since we use it with the
command line "lpr -Pprinter_name file_name". Can
somebody help me?
Thanks
Eric
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/
Return-Path: <kourosh at loop.com>
Delivered-To: samba at samba.org
Received: from atlanticpearl.com (unknown [64.63.42.245]) by
lists.samba.org (Postfix) with SMTP id 44951460C for
<samba at samba.org>; Wed, 13 Jun 2001 10:40:41 -0700 (PDT)
Received: (qmail 11327 invoked from network); 13 Jun 2001 17:32:11 -0000
Received: from (HELO ryoko.loop.com) () by hera.atlanticpearl.com with
SMTP; 13 Jun 2001 17:32:11 -0000
Message-Id: <5.0.2.1.0.20010613103901.03cca008 at pop.loop.com>
X-Sender: kourosh at pop.loop.com
X-Mailer: QUALCOMM Windows Eudora Version 5.0.2
Date: Wed, 13 Jun 2001 10:41:19 -0700
To: samba at samba.org
From: Kourosh Ghassemieh <kourosh at loop.com>
Subject: Network recycle bin in July issue of SysAdmin Mag
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi all,
In the most recent issue of SysAdmin Magazine,
July 2001, there is an article about a network
recycle bin. It looks interesting and there are times
I've wished I had one. It's based on the samba 2.0.7
code and I don't know if it will work with the 2.2 code.
Regards.
-
------------------------------------------------------------------------
Kourosh Ghassemieh
MindWare Information Systems & Technologies
9255 Sunset Blvd, Penthouse
West Hollywood CA 90069
(310) 729-1784
kourosh at loop.com
++++Networking Solutions for Your Business++++
Return-Path: <ctooley at amoa.org>
Delivered-To: samba at samba.org
Received: from amoa.org (amoa.org [207.207.51.226]) by lists.samba.org
(Postfix) with SMTP id 6B0BA4F9B for <samba at samba.org>; Wed, 13 Jun
2001 10:43:37 -0700 (PDT)
Received: by amoa.org(Lotus SMTP MTA v4.6.5 (863.2 5-20-1999)) id
86256A6A.0061612A ; Wed, 13 Jun 2001 12:43:38 -0500
X-Lotus-FromDomain: AMOA
From: ctooley at amoa.org
To: Kourosh Ghassemieh <kourosh at loop.com>
Cc: samba at samba.org
Message-ID: <86256A6A.0061606A.00 at amoa.org>
Date: Wed, 13 Jun 2001 12:43:35 -0500
Subject: Re: Network recycle bin in July issue of SysAdmin Mag
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Disposition: inline
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Do you have a url for the project?
Kourosh Ghassemieh <kourosh at loop.com> on 06/13/2001 12:41:19 PM
To: samba at samba.org
cc: (bcc: Chris Tooley/AMOA)
Subject Network recycle bin in July issue of SysAdmin
: Mag
Hi all,
In the most recent issue of SysAdmin Magazine,
July 2001, there is an article about a network
recycle bin. It looks interesting and there are times
I've wished I had one. It's based on the samba 2.0.7
code and I don't know if it will work with the 2.2 code.
Regards.
-
------------------------------------------------------------------------
Kourosh Ghassemieh
MindWare Information Systems & Technologies
9255 Sunset Blvd, Penthouse
West Hollywood CA 90069
(310) 729-1784
kourosh at loop.com
++++Networking Solutions for Your Business++++
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <kyle at comanche.rawah.co.larimer.co.us>
Delivered-To: samba at lists.samba.org
Received: from rawah.co.larimer.co.us (unknown [204.133.54.49]) by
lists.samba.org (Postfix) with ESMTP id 238694FCB for
<samba at lists.samba.org>; Wed, 13 Jun 2001 10:44:24 -0700 (PDT)
Received: from comanche.rawah.co.larimer.co.us (comanche
[205.169.12.67]) by rawah.co.larimer.co.us (8.9.1b+Sun/8.9.1) with
ESMTP id LAA24433; Wed, 13 Jun 2001 11:43:56 -0600 (MDT)
Received: from comanche (comanche [205.169.12.67]) by
comanche.rawah.co.larimer.co.us (8.8.8+Sun/8.8.8) with SMTP id
LAA14421; Wed, 13 Jun 2001 11:43:54 -0600 (MDT)
Message-Id: <200106131743.LAA14421 at comanche.rawah.co.larimer.co.us>
Date: Wed, 13 Jun 2001 11:43:54 -0600 (MDT)
From: Kyle Freestone <kyle at rawah.co.larimer.co.us>
Reply-To: Kyle Freestone <kyle at rawah.co.larimer.co.us>
Subject: Re: DNS and Samba share mapping
To: u13471 at hs-harz.de
Cc: samba at lists.samba.org
MIME-Version: 1.0
Content-Type: TEXT/plain; charset=us-ascii
Content-MD5: qIWMO8G4VB7AlepNM71VxQ==
X-Mailer: dtmail 1.2.1 CDE Version 1.2.1 SunOS 5.6 sun4u sparc
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I'm pretty ignorant when it comes to networking, but mine seems to be
working even though I'm on a different subnet from the Samba server.
When you say that "It just enables your samba box to "see" or find all
boxes that are known to your dns server." Shouldn't that be the
reverse ... It allows the clients to see a Samba server that is
known to the DNS server???
Am I totally off base with this, or are we going to need to populate our
DNS servers with every client's info??
TIA
Kyle
Ed Wrote:
>
> They do ... but that will not solve your prob if the workstations are in
> different subnets ;(.
> It just enables your samba box to "see" or find all boxes that are known to
> your dns server.
>
> Greets
> Ed
>
> Kyle Freestone wrote:
> >
> > Does any version of Samba support DNS name resolution instead of WINS. The
> > reason I'm wondering is, our Network people are wanting to eliminate all of
our
> > WINS servers, and go strictly to DNS. I have been running a Solaris7 server
w/
> > Samba 2.0.0 using the existing NT WINS servers for quite a while with only a
few
> > problems.
> > I think I have DNS resolution working on a test machine ... I think. I'm
just
> > concerned that I'm going to have a bunch of end-users go belly-up when they
> > powerdown the WINS servers.
> > Any comments or suggestions???
> >
> > Kyle Freestone
> > kyle at rawah.co.larimer.co.us
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions: http://lists.samba.org/mailman/listinfo/samba
>
> --
> public class WhoDidIt{ // A comment. I love comments
> private static Person sender;
>
> public static void main (String[] foo){
> sender = new Student();
>
> sender.setName({"Edgar", "Soldin"});
> sender.setCourse("Computerscience for media and art");
>
> Adress address=new Adress();
> address.setStreet("Friedrichstr. 57-59 Wh 4.511");
> address.setZip(38855);
> address.setCity("Wernigerode");
> adress.setCountry("Germany");
>
> sender.setAdress(address);
> sender.setMobilePhone("+49171-2782880");
> sender.setWebSiteUrl(" http://www.soldin.de ");
> sender.setEmail(" edgar at soldin.de ");
> sender.setGender(true);
>
> System.out.println(sender.toString());
> }
> }
Return-Path: <jbenedet at unm.edu>
Delivered-To: samba at lists.samba.org
Received: from linux05.unm.edu (linux05.unm.edu [129.24.15.37]) by
lists.samba.org (Postfix) with SMTP id 96EC64FCC for
<samba at lists.samba.org>; Wed, 13 Jun 2001 10:52:44 -0700 (PDT)
Received: (qmail 4799 invoked by uid 124); 13 Jun 2001 17:52:19 -0000
Received: from jbenedet at unm.edu by linux05.unm.edu with
qmail-scanner-0.96 (. Clean. Processed in 0.017765 secs); 13 Jun 2001
17:52:19 -0000
Received: from dhcp-200-0382.unm.edu (129.24.206.24) by linux05.unm.edu
with SMTP; 13 Jun 2001 17:52:19 -0000
Date: Wed, 13 Jun 2001 11:51:02 -0700
From: John Benedetto <jbenedet at unm.edu>
To: samba at lists.samba.org
Cc: Arnold Andrews X-324-4292 <aandrews at eng.okla.seagate.com>
Subject: Re: Passwd change via SWAT
Message-ID: <295616674.992433062 at dhcp-200-0382.unm.edu>
In-Reply-To: <200106131323.IAA19346 at ocosdrc01.eng.okla.seagate.com>
Originator-Info: login-token=Mulberry:01pJoDbA78aNok/m3ru01v3ufsdectyEuV
GQ==
X-Mailer: Mulberry/2.0.5 (Win32)
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
--On Wednesday, June 13, 2001 8:23 AM -0500 Arnold Andrews X-324-4292
<aandrews at eng.okla.seagate.com> wrote:
>> It's my understanding that ONLY root can run SWAT. If that *is* true,
>> what was done to Samba on the old machine to change that?
>>
>> - john
>
> I have successfully logged in to swat as a regular user on my 2.2 server.
> I find that it won't accept the samba password, but rather wants the
> Unix password for authentication. If your Unix passwords are not
> synched with your samba password, then use the Unix password. You will
> be changing the samba password once inside the SWAT.
>
> Good luck,
>
> Arnold Andrews
Wow! That worked for me, on my 2.0.8 machine! I did not know I could do
that. Thanks!
- john
Return-Path: <kourosh at loop.com>
Delivered-To: samba at samba.org
Received: from atlanticpearl.com (unknown [64.63.42.245]) by
lists.samba.org (Postfix) with SMTP id 7009B4F6A for
<samba at samba.org>; Wed, 13 Jun 2001 10:53:09 -0700 (PDT)
Received: (qmail 11395 invoked from network); 13 Jun 2001 17:44:58 -0000
Received: from (HELO ryoko.loop.com) () by hera.atlanticpearl.com with
SMTP; 13 Jun 2001 17:44:58 -0000
Message-Id: <5.0.2.1.0.20010613105148.00b0b298 at pop.loop.com>
X-Sender: kourosh at pop.loop.com
X-Mailer: QUALCOMM Windows Eudora Version 5.0.2
Date: Wed, 13 Jun 2001 10:54:05 -0700
To: ctooley at amoa.org, samba at samba.org
From: Kourosh Ghassemieh <kourosh at loop.com>
Subject: Re: Network recycle bin in July issue of SysAdmin Mag
In-Reply-To: <86256A6A.0061606A.00 at amoa.org>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Sorry, I forgot to bring the issue in today. I'll
get you the URL tomorrow. The url for the
magazine is www.sysadminmag.com but they
don't have that article online, they only list the
article in the TOC.
At 12:43 PM 6/13/2001 -0500, you wrote:
>Do you have a url for the project?
>
>
>
>
>
>
>
>Kourosh Ghassemieh <kourosh at loop.com> on 06/13/2001 12:41:19 PM
>
>
>
> To: samba at samba.org
>
> cc: (bcc: Chris Tooley/AMOA)
>
>
>
> Subject Network recycle bin in July issue of SysAdmin
> : Mag
>
-
------------------------------------------------------------------------
Kourosh Ghassemieh
MindWare Information Systems & Technologies
9255 Sunset Blvd, Penthouse
West Hollywood CA 90069
(310) 729-1784
kourosh at loop.com
++++Networking Solutions for Your Business++++
Return-Path: <alex at palmira.dntis.ro>
Delivered-To: samba at lists.samba.org
Received: from palmira.dntis.ro (palmira.dntis.ro [193.226.101.140]) by
lists.samba.org (Postfix) with ESMTP id CA6A64DA2 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 10:53:26 -0700 (PDT)
Received: from localhost (alex at localhost) by palmira.dntis.ro
(8.11.0/8.11.0) with ESMTP id f5DHu1e10765; Wed, 13 Jun 2001 20:56:01
+0300
Date: Wed, 13 Jun 2001 20:56:00 +0300 (EEST)
From: <alex at palmira.dntis.ro>
To: Duke Windsor <d20k3 at chara.gsu.edu>
Cc: samba at lists.samba.org
Subject: Re: user list and domain service
In-Reply-To: <Pine.LNX.4.21.0106131232140.12480-100000 at localhost.localdo
m ain>
Message-ID: <Pine.LNX.4.21.0106132045220.10013-100000 at palmira.dntis.ro>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
You need to enable encrypted passwords in smb.conf (encrypt
passwords=yes) and add all your users to the smbpasswd database. You might
want to enable wins support on your samba machine. If you want your samba
server to act as a PDC, then I suggest setting " os level=65 ".
Alex Iruc
Network Administrator
Romania, IASI
On Wed, 13 Jun 2001, Duke Windsor wrote:
> I am running Samba 2.2.x
> I cannot seem to view the list of users when creating a
> shared directory on Win98 when I am also Logging on to
> a Win-NT domain (for passwd verification at login).
>
> If I have the Netbios name and workgroup name the same
> in the smb.conf, and do not enable 'Logon to Windows NT
> domain' on the Win98 box, then I do see the user list.
> I cannot logon to the NT domain with the netbios and
> workgroup names the same. If I change the names, re-
> configure the WIN98 box, and still do not use NT domains,
> I will not see the user list.
>
> What's going on? I need the user passwd verification at
> logon and to see the user list when creating shares. I
> would appreciate some help. Thanks
>
> -Duke
>
>
Return-Path: <askwar at digitalprojects.com>
Delivered-To: samba at lists.samba.org
Received: from mailout03.sul.t-online.de (mailout03.sul.t-online.com
[194.25.134.81]) by lists.samba.org (Postfix) with ESMTP id E1CF94DA2
for <samba at lists.samba.org>; Wed, 13 Jun 2001 10:53:52 -0700 (PDT)
Received: from fwd05.sul.t-online.de by mailout03.sul.t-online.de with
smtp id 15AEpP-0003QC-0D; Wed, 13 Jun 2001 19:53:15 +0200
Received: from teich.garten.digitalprojects.com
(510044997847-0001@[62.226.92.85]) by fmrl05.sul.t-online.com with
esmtp id 15AEpN-0RWoZEC; Wed, 13 Jun 2001 19:53:13 +0200
Received: by teich.garten.digitalprojects.com (Postfix, from userid 501)
id DADBF594AA; Wed, 13 Jun 2001 19:53:09 +0200 (CEST)
Date: Wed, 13 Jun 2001 19:53:09 +0200
From: Alexander Skwar <ASkwar at DigitalProjects.com>
To: "MCCALL,DON (HP-USA,ex1)" <don_mccall at hp.com>
Cc: becker at lufa-sp.vdlufa.de, Craig Kelley <ink at inconnu.isu.edu>,
samba at lists.samba.org
Subject: Re: Windows 95 clients cannot connect (Wins Server)
Message-ID: <20010613195309.J26168 at Garten.DigitalProjects.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 7bit
In-Reply-To: <079FD72E42C9D311B854009027650E6F04050ABB at xatl02.atl.hp.com
>
User-Agent: Mutt/1.3.18i
X-Operating-System: An i686 Linux with Kernel v2.4.3-27mdk
X-Face: nope
X-Sender: 510044997847-0001 at t-dialin.net
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
So sprach MCCALL,DON (HP-USA,ex1) am Wed, Jun 13, 2001 at 07:31:56AM -0700:
> Hi,
> It doesn't really matter WHERE you put the wins server, as long as ALL of
> your clients and Servers have a route to the ipaddress of the wins server.
> That's the point ;-> you configure each of your clients and servers to USE
> the wins server at whatever ip address it lives at, and when the
> clients/servers come up, they go directly to that ip address to register
> their netbios names and ip addresses. And when the clients need to RESOLVE
> a netbios name, they ask that same wins server for the ipaddress associated
> with that name. So everybody's consulting the same 'authority'.
Ah, this clears up some of my confusion! Thanks a lot!
But one more thing that I'm missing - in NT 4.0 and 98 I can connect to
\\123.123.123.123\ShareName - ie. I connect to the IP address of the server.
Will I still need a WINS server in this case? And what about encrypted
passwords? My Samba server (and I suppose also the NT 4.0 SP 4+ servers)
use encrypted passwords. Is Windows 95 able to encrypt passwords? (No,
it's not) What update do I need to install on Windows 95, 95b and 95c to
enable encrypted passwords?
Alexander Skwar
--
How to quote: http://learn.to/quote (german) http://quote.6x.to (english)
Homepage: http://www.digitalprojects.com | http://www.iso-top.de
iso-top.de - Die g|nstige Art an Linux Distributionen zu kommen
Uptime: 21 hours 1 minute
Return-Path: <kourosh at loop.com>
Delivered-To: samba at samba.org
Received: from atlanticpearl.com (unknown [64.63.42.245]) by
lists.samba.org (Postfix) with SMTP id C97C545D5 for
<samba at samba.org>; Wed, 13 Jun 2001 11:01:01 -0700 (PDT)
Received: (qmail 11415 invoked from network); 13 Jun 2001 17:52:50 -0000
Received: from (HELO ryoko.loop.com) () by hera.atlanticpearl.com with
SMTP; 13 Jun 2001 17:52:50 -0000
Message-Id: <5.0.2.1.0.20010613105926.02f37748 at pop.loop.com>
X-Sender: kourosh at pop.loop.com
X-Mailer: QUALCOMM Windows Eudora Version 5.0.2
Date: Wed, 13 Jun 2001 11:01:58 -0700
To: samba at samba.org
From: Kourosh Ghassemieh <kourosh at loop.com>
Subject: Re: [Forum] What are the possibilities?
In-Reply-To: <Pine.LNX.4.20.0106131029470.8810-100000 at spfalz.office.us.t
lan>
References: <5.0.2.1.0.20010613095530.03370bf0 at pop.loop.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
It is possible to use the 2.2 series with W2K as long as no
service packs are applied. It's only the service packs that
introduces the bugs. I've successfully used 2.2 with W2K
without the service packs installed.
Regards.
At 10:35 AM 6/13/2001 -0700, you wrote:
>Hello,
>
>A follow up to this email, and to one previous one regarding Samba 2.2 Do
>not use the current Samba 2.2.0 for Win2k. Microsoft introduced two new
>tweaks in service pack 2 that broke Samba. Samba 2.2.1 should fix the
>problems which are:
>
>1. In the login, a remote procedure call that expects an NT error
>message, which if not received, prevents the login
>
>2. Re-authentication of the protocol in the middle of large file writes,
>specifically to increase the file transfer block size from 4k to
>64k.
>
>These are both Microsoft introduced "bugs" and are being implemented in
>Samba 2.2.1.
>
>
>Regards,
>Scott Pfalzgraf
>TurboLinux
>Manager, Sales Engineers
>scott at turbolinux.com
>T 650-228-5054
-
------------------------------------------------------------------------
Kourosh Ghassemieh
MindWare Information Systems & Technologies
9255 Sunset Blvd, Penthouse
West Hollywood CA 90069
(310) 729-1784
kourosh at loop.com
++++Networking Solutions for Your Business++++
Return-Path: <askwar at digitalprojects.com>
Delivered-To: samba at lists.samba.org
Received: from mailout05.sul.t-online.de (mailout05.sul.t-online.com
[194.25.134.82]) by lists.samba.org (Postfix) with ESMTP id CE0C04FFA
for <samba at lists.samba.org>; Wed, 13 Jun 2001 11:07:13 -0700 (PDT)
Received: from fwd03.sul.t-online.de by mailout05.sul.t-online.de with
smtp id 15AF1z-0004ms-02; Wed, 13 Jun 2001 20:06:15 +0200
Received: from teich.garten.digitalprojects.com
(510044997847-0001@[62.226.92.85]) by fmrl03.sul.t-online.com with
esmtp id 15AF1o-26KM8uC; Wed, 13 Jun 2001 20:06:04 +0200
Received: by teich.garten.digitalprojects.com (Postfix, from userid 501)
id 3D2CF59872; Wed, 13 Jun 2001 20:06:03 +0200 (CEST)
Date: Wed, 13 Jun 2001 20:06:03 +0200
From: Alexander Skwar <ASkwar at DigitalProjects.com>
To: "MCCALL,DON (HP-USA,ex1)" <don_mccall at hp.com>
Cc: becker at lufa-sp.vdlufa.de, Craig Kelley <ink at inconnu.isu.edu>,
samba at lists.samba.org
Subject: Re: Windows 95 clients cannot connect (Wins Server)
Message-ID: <20010613200603.M26168 at Garten.DigitalProjects.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 7bit
In-Reply-To: <20010613195309.J26168 at Garten.DigitalProjects.com>
User-Agent: Mutt/1.3.18i
X-Operating-System: An i686 Linux with Kernel v2.4.3-27mdk
X-Face: nope
X-Sender: 510044997847-0001 at t-dialin.net
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
So sprach Alexander 'Digital Projects' Skwar am Wed, Jun 13, 2001 at
07:53:09PM +0200:
> Will I still need a WINS server in this case? And what about encrypted
IOW: Will I need a WINS server so that Windows 95 clients can connect. NT
4.0 and 98 work fine with only the IP address. This wasn't clear, I think.
Alexander Skwar
--
How to quote: http://learn.to/quote (german) http://quote.6x.to (english)
Homepage: http://www.digitalprojects.com | http://www.iso-top.de
iso-top.de - Die g|nstige Art an Linux Distributionen zu kommen
Uptime: 21 hours 18 minutes
Return-Path: <don_mccall at hp.com>
Delivered-To: samba at lists.samba.org
Received: from palrel1.hp.com (palrel1.hp.com [156.153.255.242]) by
lists.samba.org (Postfix) with ESMTP id 0FA695005 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 11:09:08 -0700 (PDT)
Received: from xparelay1.corp.hp.com (unknown [15.58.136.173]) by
palrel1.hp.com (Postfix) with ESMTP id 4228F998; Wed, 13 Jun 2001
11:08:48 -0700 (PDT)
Received: from xpabh4.corp.hp.com (xpabh4.corp.hp.com [15.58.136.1]) by
xparelay1.corp.hp.com (Postfix) with ESMTP id DAAFC1F512; Wed, 13 Jun
2001 05:05:49 -0700 (PDT)
Received: by xpabh4.corp.hp.com with Internet Mail Service (5.5.2653.19)
id <MZ6HXGSZ>; Wed, 13 Jun 2001 11:08:41 -0700
Message-ID: <079FD72E42C9D311B854009027650E6F04050AC0 at xatl02.atl.hp.com>
From: "MCCALL,DON (HP-USA,ex1)" <don_mccall at hp.com>
To: 'Wolfgang Wegner' <wolfgang at leila.ping.de>, samba at lists.samba.org
Subject: RE: Half encryption? :-)
Date: Wed, 13 Jun 2001 11:08:40 -0700
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hallo Wolfgang;
I could be wrong ,but the way I understand it, is winNT and win2k (and
winME, I believe), if they are set to EnablePlainTextPassword in the
registry, will first attempt to negotiate protocol WITH encryption required;
It does this several times, and then finally will negotiate protocol with
plaintext passwords, but as an 'added' security measure, before it will
actually do the plaintext negotiation, and embed the plaintext password in
the sessionSetup&X packet, it forces you to enter something explicit for the
username and password (even if it is blank), sort of a "do you really want
to do this" kind of thing. If you actually type net use f:
\\servername\sharename it will come back and tell you that "The password
is invalid for \\servername\sharename". But it hasn't even sent a
sessionsetup&x with the username/password pair to the server at that point.
It's just WinNT/Win2k using an already existing message for another
purpose...
Unfortunately, this is by design from Microsoft, and I have never been able
to find a way around it. Maybe someone
else on the list may be able to offer a clue.
If you just want your users to be able to print without being bothered about
making a connection, you could add the following line to their logon script
where sharename is some share on the samba server that allows guest access:
net use \\sambaserver\\sambashare "" /user:""
That will establish a connection with the server, so your printing will
work. It's ugly, but it might help you out...
Don
-----Original Message-----
From: Wolfgang Wegner [mailto:wolfgang at leila.ping.de]
Sent: Wednesday, June 13, 2001 1:18 PM
To: samba at lists.samba.org
Subject: Half encryption? :-)
Hi,
sorry, I know there are many questions regarding problems with
the encryption, so here is another one.
I want to set up a print and file server running samba 2.0.9 on
suse 7.1 (should not matter), without password encryption. The
problem is, the clients (NT4 and W2k) require to connect to
the server once before printing is possible (i.e., "search
computer", double-click on the name, and just hit enter when
prompted for username/password).
So, there is no username and valid password necessary to access
the shares, the NT clients just seem not to realize this.
As soon as I enable the encrypted passwords on the server, this
works (but with other problems accessing the restricted shares,
of course).
Does anyone know what I could do about this?
I really did not find anything about this problem despite checking
for the correct setting of the password encryption on the client
side, but this is OK, as I can see when accessing the "normal"
(user-related and password-protected) shares.
Any help is highly appreciated!
Thanks,
Wolfgang
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <btenison at earthlink.net>
Delivered-To: samba at samba.org
Received: from gate.rstc.cc.al.us (gate.rstc.cc.al.us [207.157.90.3]) by
lists.samba.org (Postfix) with ESMTP id 65AD1469E for
<samba at samba.org>; Wed, 13 Jun 2001 11:13:46 -0700 (PDT)
Received: from tenison (tenison.irstc.cc.al.us [192.168.5.1]) by
gate.rstc.cc.al.us (8.11.0/8.8.7) with SMTP id f5DIDH029587; Wed, 13
Jun 2001 13:13:17 -0500
From: "Bruce Tenison" <btenison at earthlink.net>
To: "Kourosh Ghassemieh" <kourosh at loop.com>, <ctooley at amoa.org>,
<samba at samba.org>
Subject: RE: Network recycle bin in July issue of SysAdmin Mag
Date: Wed, 13 Jun 2001 13:13:16 -0500
Message-ID: <MOEJJJJNHOHFJKMMGHALCENBIAAA.btenison at earthlink.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0)
In-Reply-To: <5.0.2.1.0.20010613105148.00b0b298 at pop.loop.com>
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Just read the article, myself. Patches and files are available at:
ftp://ftp.amherst.edu/pub/samba/
Bruce
> -----Original Message-----
> From: samba-admin at lists.samba.org [mailto:samba-admin at lists.samba.org]On
> Behalf Of Kourosh Ghassemieh
> Sent: Wednesday, June 13, 2001 12:54 PM
> To: ctooley at amoa.org; samba at samba.org
> Subject: Re: Network recycle bin in July issue of SysAdmin Mag
>
>
> Sorry, I forgot to bring the issue in today. I'll
> get you the URL tomorrow. The url for the
> magazine is www.sysadminmag.com but they
> don't have that article online, they only list the
> article in the TOC.
>
> At 12:43 PM 6/13/2001 -0500, you wrote:
>
>
> >Do you have a url for the project?
> >
> >
> >
> >
> >
> >
> >
> >Kourosh Ghassemieh <kourosh at loop.com> on 06/13/2001 12:41:19 PM
> >
> >
> >
> > To: samba at samba.org
> >
> > cc: (bcc: Chris Tooley/AMOA)
> >
> >
> >
> > Subject Network recycle bin in July issue of SysAdmin
> > : Mag
> >
>
> -
> ------------------------------------------------------------------------
> Kourosh Ghassemieh
> MindWare Information Systems & Technologies
> 9255 Sunset Blvd, Penthouse
> West Hollywood CA 90069
> (310) 729-1784
> kourosh at loop.com
>
> ++++Networking Solutions for Your Business++++
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <mekilroy at risingedge.com>
Delivered-To: samba at lists.samba.org
Received: from mailhost.digitalselect.net (unknown [209.225.164.170]) by
lists.samba.org (Postfix) with ESMTP id AACB04FB0; Wed, 13 Jun 2001
11:18:11 -0700 (PDT)
Received: from wizzard.rising-edge (risingedge.com [216.181.63.36]) by
mailhost.digitalselect.net (8.11.1/8.11.1) with SMTP id f5DIJLS14828;
Wed, 13 Jun 2001 14:19:21 -0400 (EDT)
Received: from diamondback (unverified [192.168.0.26]) by
wizzard.rising-edge (EMWAC SMTPRS 0.83) with SMTP id
<B0000082275 at wizzard.rising-edge>; Wed, 13 Jun 2001 14:17:40 -0400
Message-ID: <013501c0f435$2155a980$1a00a8c0 at diamondback>
From: "M. Kilroy" <mekilroy at risingedge.com>
To: <samba at lists.samba.org>, <samba-ntdom at lists.samba.org>
Subject: Another winbind question...
Date: Wed, 13 Jun 2001 14:17:39 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Mailer: Microsoft Outlook Express 5.50.4133.2400
X-Antirelay: Good relay from local net2 192.168.0.0/24
X-Converted-To-Plain-Text: from multipart/alternative by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Thanks to everyone for the help so far!
I have winbind running on my RHL7.1 system now. It returns all the groups
from the PDC and sees all the users. Why then do I get prompted for a
password/username when I try to log in to the Linux server from an NT machine?
It is still only letting me in as a guest or nobody. How can I stop it from
letting me in as a guest and make me authenticate the NT username i'm logged
in as on my NT box via the PDC?
Any ideas on this?
THANKS!
Return-Path: <don_mccall at hp.com>
Delivered-To: samba at lists.samba.org
Received: from atlrel1.hp.com (atlrel1.hp.com [156.153.255.210]) by
lists.samba.org (Postfix) with ESMTP id 40B624FEE for
<samba at lists.samba.org>; Wed, 13 Jun 2001 11:21:23 -0700 (PDT)
Received: from xatlrelay1.atl.hp.com (xatlrelay1.atl.hp.com
[15.45.89.190]) by atlrel1.hp.com (Postfix) with ESMTP id 5FBD31034;
Wed, 13 Jun 2001 14:20:58 -0400 (EDT)
Received: from xatlbh4.atl.hp.com (xatlbh4.atl.hp.com [15.45.89.189]) by
xatlrelay1.atl.hp.com (Postfix) with ESMTP id 800F41F512; Wed, 13 Jun
2001 14:20:22 -0400 (EDT)
Received: by xatlbh4.atl.hp.com with Internet Mail Service (5.5.2653.19)
id <MZ68LKT5>; Wed, 13 Jun 2001 14:20:50 -0400
Message-ID: <079FD72E42C9D311B854009027650E6F04050AC1 at xatl02.atl.hp.com>
From: "MCCALL,DON (HP-USA,ex1)" <don_mccall at hp.com>
To: 'Alexander Skwar' <ASkwar at DigitalProjects.com>, "MCCALL,DON
(HP-USA,ex1)" <don_mccall at hp.com>
Cc: becker at lufa-sp.vdlufa.de, Craig Kelley <ink at inconnu.isu.edu>,
samba at lists.samba.org
Subject: RE: Windows 95 clients cannot connect (Wins Server)
Date: Wed, 13 Jun 2001 14:20:32 -0400
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hello Alexander,
Wie gehts dir Heute?
I could be wrong, but if all the clients that you are using can use the
\\ipaddress\sharename syntax (win95 can't,
for instance), OR you have a dns server and you pc clients netbios names are
the same as the hostname being registered
with the dns server, and you all agree to resolve via dns, then you wouldn't
need a wins server.
And again I could be wrong, but I believe Win95 CAN send encrypted
passwords, even at it's initial release. The problem
was NOT that win95b sr1?? or win98 and NT with sp3 and above couldn't do
encrypted passwords, it was that UNTIL those
releases, if it tried to talk to a server that did NOT allow encrypted
passwords, it would send plaintext passwords.
After the above releases the default behavior of the clients was to refuse
to negotiate a connection with a server
that could NOT handle encrypted passwords. Thus the need for a registry
change to ENABLE plaintext passwords.
But if you are setting up your samba server with encrypt passwords=yes, then
it will handle clients that send
encrypted passwords AND clients that send plaintext passwords.
Hope this helps,
Tschuss,
Don
-----Original Message-----
From: Alexander Skwar [mailto:ASkwar at DigitalProjects.com]
Sent: Wednesday, June 13, 2001 1:53 PM
To: MCCALL,DON (HP-USA,ex1)
Cc: becker at lufa-sp.vdlufa.de; Craig Kelley; samba at lists.samba.org
Subject: Re: Windows 95 clients cannot connect (Wins Server)
So sprach MCCALL,DON (HP-USA,ex1) am Wed, Jun 13, 2001 at 07:31:56AM -0700:
> Hi,
> It doesn't really matter WHERE you put the wins server, as long as ALL of
> your clients and Servers have a route to the ipaddress of the wins server.
> That's the point ;-> you configure each of your clients and servers to
USE
> the wins server at whatever ip address it lives at, and when the
> clients/servers come up, they go directly to that ip address to register
> their netbios names and ip addresses. And when the clients need to
RESOLVE
> a netbios name, they ask that same wins server for the ipaddress
associated
> with that name. So everybody's consulting the same 'authority'.
Ah, this clears up some of my confusion! Thanks a lot!
But one more thing that I'm missing - in NT 4.0 and 98 I can connect to
\\123.123.123.123\ShareName - ie. I connect to the IP address of the server.
Will I still need a WINS server in this case? And what about encrypted
passwords? My Samba server (and I suppose also the NT 4.0 SP 4+ servers)
use encrypted passwords. Is Windows 95 able to encrypt passwords? (No,
it's not) What update do I need to install on Windows 95, 95b and 95c to
enable encrypted passwords?
Alexander Skwar
--
How to quote: http://learn.to/quote (german) http://quote.6x.to (english)
Homepage: http://www.digitalprojects.com | http://www.iso-top.de
iso-top.de - Die g|nstige Art an Linux Distributionen zu kommen
Uptime: 21 hours 1 minute
Return-Path: <mekilroy at risingedge.com>
Delivered-To: samba at lists.samba.org
Received: from mailhost.digitalselect.net (unknown [209.225.164.170]) by
lists.samba.org (Postfix) with ESMTP id CA15B4FF3; Wed, 13 Jun 2001
11:22:59 -0700 (PDT)
Received: from wizzard.rising-edge (risingedge.com [216.181.63.36]) by
mailhost.digitalselect.net (8.11.1/8.11.1) with SMTP id f5DIO9S15186;
Wed, 13 Jun 2001 14:24:09 -0400 (EDT)
Received: from diamondback (unverified [192.168.0.26]) by
wizzard.rising-edge (EMWAC SMTPRS 0.83) with SMTP id
<B0000082281 at wizzard.rising-edge>; Wed, 13 Jun 2001 14:22:22 -0400
Message-ID: <015401c0f435$c9557980$1a00a8c0 at diamondback>
From: "M. Kilroy" <mekilroy at risingedge.com>
To: <samba at lists.samba.org>, <samba-ntdom at lists.samba.org>
Subject: more newbie questions
Date: Wed, 13 Jun 2001 14:22:21 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Mailer: Microsoft Outlook Express 5.50.4133.2400
X-Antirelay: Good relay from local net2 192.168.0.0/24
X-Converted-To-Plain-Text: from multipart/alternative by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
The latest winbind man says to do:
samedit -S '*' -W DOMAIN -UAdministrator
then,
createuser MACHINE$ -j DOMAIN -L
but when I try to run either I get errors because I do not have samedit or
createuser on my linux box for some reason. So instead I used "smbpasswd -j
DOMAIN -r PDC" after creating an account for the linux box in the domain on my
PDC. Does this cause any problems with winbind or authentication??
Thanks!
~Mary
M.E.Kilroy
Rising Edge Technologies Inc.
1110 Elden St. Suite 301
Herndon, VA 20170
mekilroy at risingedge.com
WK: 703-471-8108
FAX: 703-471-8195
"I have not failed. I've just found 10,000 ways that won't work."
- Thomas Alva Edison (1847-1931)
"C makes it easy to shoot yourself in the foot; C++ makes it harder, but when
you do, it blows away your whole leg."
- Bjarne Stroustrup
"Black holes are where God divided by zero."
- Steven Wright
"Anyone who considers arithmetical methods of producing random digits is, of
course, in a state of sin. "
- John von Neumann (1903-1957)
Return-Path: <kourosh at loop.com>
Delivered-To: samba at samba.org
Received: from atlanticpearl.com (unknown [64.63.42.245]) by
lists.samba.org (Postfix) with SMTP id 68F554FFE for
<samba at samba.org>; Wed, 13 Jun 2001 11:29:20 -0700 (PDT)
Received: (qmail 11681 invoked from network); 13 Jun 2001 18:21:09 -0000
Received: from (HELO ryoko.loop.com) () by hera.atlanticpearl.com with
SMTP; 13 Jun 2001 18:21:09 -0000
Message-Id: <5.0.2.1.0.20010613112847.02ed0e10 at pop.loop.com>
X-Sender: kourosh at pop.loop.com
X-Mailer: QUALCOMM Windows Eudora Version 5.0.2
Date: Wed, 13 Jun 2001 11:30:16 -0700
To: samba at samba.org
From: Kourosh Ghassemieh <kourosh at loop.com>
Subject: RE: Network recycle bin in July issue of SysAdmin Mag
In-Reply-To: <MOEJJJJNHOHFJKMMGHALCENBIAAA.btenison at earthlink.net>
References: <5.0.2.1.0.20010613105148.00b0b298 at pop.loop.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Well, there you are =)
If somebody tries it please drop the list a line
and tell us how it works.
At 01:13 PM 6/13/2001 -0500, you wrote:
>Just read the article, myself. Patches and files are available at:
>ftp://ftp.amherst.edu/pub/samba/
>
>Bruce
>
> > -----Original Message-----
> > From: samba-admin at lists.samba.org [mailto:samba-admin at lists.samba.org]On
> > Behalf Of Kourosh Ghassemieh
> > Sent: Wednesday, June 13, 2001 12:54 PM
> > To: ctooley at amoa.org; samba at samba.org
> > Subject: Re: Network recycle bin in July issue of SysAdmin Mag
> >
> >
> > Sorry, I forgot to bring the issue in today. I'll
> > get you the URL tomorrow. The url for the
> > magazine is www.sysadminmag.com but they
> > don't have that article online, they only list the
> > article in the TOC.
-
------------------------------------------------------------------------
Kourosh Ghassemieh
MindWare Information Systems & Technologies
9255 Sunset Blvd, Penthouse
West Hollywood CA 90069
(310) 729-1784
kourosh at loop.com
++++Networking Solutions for Your Business++++
Return-Path: <askwar at digitalprojects.com>
Delivered-To: samba at lists.samba.org
Received: from mailout03.sul.t-online.de (mailout03.sul.t-online.com
[194.25.134.81]) by lists.samba.org (Postfix) with ESMTP id F2BF0500B
for <samba at lists.samba.org>; Wed, 13 Jun 2001 11:43:29 -0700 (PDT)
Received: from fwd04.sul.t-online.de by mailout03.sul.t-online.de with
smtp id 15AFbW-0008J5-0B; Wed, 13 Jun 2001 20:42:58 +0200
Received: from teich.garten.digitalprojects.com
(510044997847-0001@[62.226.92.85]) by fmrl04.sul.t-online.com with
esmtp id 15AFbQ-20bd3IC; Wed, 13 Jun 2001 20:42:52 +0200
Received: by teich.garten.digitalprojects.com (Postfix, from userid 501)
id 0D43A5858F; Wed, 13 Jun 2001 20:42:47 +0200 (CEST)
Date: Wed, 13 Jun 2001 20:42:47 +0200
From: Alexander Skwar <ASkwar at DigitalProjects.com>
To: "MCCALL,DON (HP-USA,ex1)" <don_mccall at hp.com>
Cc: becker at lufa-sp.vdlufa.de, Craig Kelley <ink at inconnu.isu.edu>,
samba at lists.samba.org
Subject: Re: Windows 95 clients cannot connect (Wins Server)
Message-ID: <20010613204247.O26168 at Garten.DigitalProjects.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 7bit
In-Reply-To: <079FD72E42C9D311B854009027650E6F04050AC1 at xatl02.atl.hp.com
>
User-Agent: Mutt/1.3.18i
X-Operating-System: An i686 Linux with Kernel v2.4.3-27mdk
X-Face: nope
X-Sender: 510044997847-0001 at t-dialin.net
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
So sprach MCCALL,DON (HP-USA,ex1) am Wed, Jun 13, 2001 at 02:20:32PM -0400:
> Hello Alexander,
> Wie gehts dir Heute?
Danke, etwas m|de :)
> I could be wrong, but if all the clients that you are using can use the
> \\ipaddress\sharename syntax (win95 can't,
Ah! Win95 can't? *EXCELLENT* tip! This would explain quite well why I'm
having these kinda problems.
> for instance), OR you have a dns server and you pc clients netbios names
are
> the same as the hostname being registered
> with the dns server, and you all agree to resolve via dns, then you
wouldn't
> need a wins server.
No, that's not what I'm having. Can I enter adresses for WINS servers if
I'm using DHCP? If not, would it help if I'd create a lmhosts file in
C:\Windows? Suppose I have two servers - the 1st being a Samba server, the
2nd a NT 4.0 server:
IP DNS name/host name Netbios name
4711 fp.delphi jt
0815 atlas.delphi de-42119-w01
Would it help, if I'd create a lmhosts file like this:
4711 fp.delphi jt
0815 atlas.delphi de-42119-w01
Or would I still need to setup a WINS server? Suppose I'd take the Samba
server to be my WINS server, what would I have to do? Other than setting
these in the global section:
wins support = yes
wins proxy = yes
What other precautions do I need to make? Would I need to create the
aforementioned lmhosts file on my Samba server in /etc, and that's it?
Would 95 clients than be able to connect to \\jt\ShareName?
Alexander Skwar
--
How to quote: http://learn.to/quote (german) http://quote.6x.to (english)
Homepage: http://www.digitalprojects.com | http://www.iso-top.de
iso-top.de - Die g|nstige Art an Linux Distributionen zu kommen
Uptime: 21 hours 43 minutes
Return-Path: <kourosh at loop.com>
Delivered-To: samba at samba.org
Received: from atlanticpearl.com (unknown [64.63.42.245]) by
lists.samba.org (Postfix) with SMTP id 6CEE5500E for
<samba at samba.org>; Wed, 13 Jun 2001 11:50:35 -0700 (PDT)
Received: (qmail 11743 invoked from network); 13 Jun 2001 18:42:23 -0000
Received: from (HELO ryoko.loop.com) () by hera.atlanticpearl.com with
SMTP; 13 Jun 2001 18:42:23 -0000
Message-Id: <5.0.2.1.0.20010613115054.02f84fe0 at pop.loop.com>
X-Sender: kourosh at pop.loop.com
X-Mailer: QUALCOMM Windows Eudora Version 5.0.2
Date: Wed, 13 Jun 2001 11:51:31 -0700
To: samba at samba.org
From: Kourosh Ghassemieh <kourosh at loop.com>
Subject: Re: [Forum] What are the possibilities?
In-Reply-To: <5.0.2.1.0.20010613105926.02f37748 at pop.loop.com>
References: <Pine.LNX.4.20.0106131029470.8810-100000 at spfalz.office.us.t
lan> <5.0.2.1.0.20010613095530.03370bf0 at pop.loop.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Sorry all,
This went to the wrong list =P
At 11:01 AM 6/13/2001 -0700, you wrote:
>It is possible to use the 2.2 series with W2K as long as no
>service packs are applied. It's only the service packs that
>introduces the bugs. I've successfully used 2.2 with W2K
>without the service packs installed.
>
>Regards.
>
>At 10:35 AM 6/13/2001 -0700, you wrote:
>>Hello,
>>
>>A follow up to this email, and to one previous one regarding Samba 2.2 Do
>>not use the current Samba 2.2.0 for Win2k. Microsoft introduced two new
>>tweaks in service pack 2 that broke Samba. Samba 2.2.1 should fix the
>>problems which are:
>>
>>1. In the login, a remote procedure call that expects an NT error
>>message, which if not received, prevents the login
>>
>>2. Re-authentication of the protocol in the middle of large file writes,
>>specifically to increase the file transfer block size from 4k to
>>64k.
>>
>>These are both Microsoft introduced "bugs" and are being implemented in
>>Samba 2.2.1.
>>
>>
>>Regards,
>>Scott Pfalzgraf
>>TurboLinux
>>Manager, Sales Engineers
>>scott at turbolinux.com
>>T 650-228-5054
>
>
>-
>------------------------------------------------------------------------
>Kourosh Ghassemieh
>MindWare Information Systems & Technologies
>9255 Sunset Blvd, Penthouse
>West Hollywood CA 90069
>(310) 729-1784
>kourosh at loop.com
>
>++++Networking Solutions for Your Business++++
>--
>To unsubscribe from this list go to the following URL and read the
>instructions: http://lists.samba.org/mailman/listinfo/samba
-
------------------------------------------------------------------------
Kourosh Ghassemieh
MindWare Information Systems & Technologies
9255 Sunset Blvd, Penthouse
West Hollywood CA 90069
(310) 729-1784
kourosh at loop.com
++++Networking Solutions for Your Business++++
Return-Path: <kkanno at rivenet.com>
Delivered-To: samba at lists.samba.org
Received: from mail.rivenet.com (dns2.rivenet.com [63.150.23.98]) by
lists.samba.org (Postfix) with ESMTP id 6B8284476 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 11:53:59 -0700 (PDT)
Received: from ex02.ad.rivenet.com (ex02.ad.rivenet.com [10.10.0.15]) by
mail.rivenet.com (Postfix) with ESMTP id 7CF9F64C12; Wed, 13 Jun 2001
13:53:34 -0500 (CDT)
Received: by ex02.ad.rivenet.com with Internet Mail Service
(5.5.2653.19) id <MXGHD2YF>; Wed, 13 Jun 2001 13:53:34 -0500
Message-ID: <0C3A66859AEF6E42A1B4AB53307B77AA0AF496 at ex02.ad.rivenet.com>
From: "Kanno, Ken" <kkanno at rivenet.com>
To: samba at lists.samba.org
Cc: samba at lists.samba.org
Subject: 2.0.9 + w2k
Date: Wed, 13 Jun 2001 13:53:30 -0500
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="us-ascii"
X-Converted-To-Plain-Text: from multipart/alternative by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Greetings.
As usual I never see an answer to what my error is or what might fix it. We
have a samba 2.0.9 (was 2.0.7 and had the exact problem) on FreeBSD 4.3. We
get nonstop errors of the type below for every Win2k cleint workstation on
the network.
[2001/06/13 12:52:38, 1] smbd/service.c:make_connection(550)
theise (10.10.2.29) connect to service corporate development as user
theise (uid=1051, gid=4000) (pid 231
32)
[2001/06/13 12:52:38, 1] smbd/service.c:make_connection(550)
theise (10.10.2.29) connect to service theise as user theise (uid=1051,
gid=4000) (pid 23133)
[2001/06/13 12:59:40, 0] lib/util_sock.c:write_socket_data(540)
write_socket_data: write failure. Error = Broken pipe
[2001/06/13 12:59:41, 0] lib/util_sock.c:write_socket_data(540)
write_socket_data: write failure. Error = Broken pipe
[2001/06/13 13:05:40, 0] lib/util_sock.c:write_socket_data(540)
write_socket_data: write failure. Error = Broken pipe
[2001/06/13 13:05:41, 0] lib/util_sock.c:write_socket_data(540)
write_socket_data: write failure. Error = Broken pipe
[2001/06/13 13:11:40, 0] lib/util_sock.c:write_socket_data(540)
write_socket_data: write failure. Error = Broken pipe
[2001/06/13 13:11:41, 0] lib/util_sock.c:write_socket_data(540)
write_socket_data: write failure. Error = Broken pipe
[2001/06/13 13:17:40, 0] lib/util_sock.c:write_socket_data(540)
write_socket_data: write failure. Error = Broken pipe
[2001/06/13 13:17:41, 0] lib/util_sock.c:write_socket_data(540)
write_socket_data: write failure. Error = Broken pipe
[2001/06/13 13:23:41, 0] lib/util_sock.c:write_socket_data(540)
write_socket_data: write failure. Error = Broken pipe
[2001/06/13 13:23:41, 0] lib/util_sock.c:write_socket_data(540)
write_socket_data: write failure. Error = Broken pipe
Here is the global part of the smb.conf:
======
[global]
workgroup = ad
server string = FreeBSD is Superior
netbios name = fs02
netbios aliases = fs01
security = server
password server = dc01
encrypt passwords = yes
load printers = no
guest account = pcguest
log file = /var/log/samba/%m_smb.log
max log size = 500
socket options = TCP_NODELAY
domain logons = no
dns proxy = no
[home$]
comment = root of user home directories
path = /ext-raid/home
browseable = yes
write list = @nta
====
So what is this error 540 and how do I make it go away?
KEN
Return-Path: <marion.haines at countygovt.brevard.fl.us>
Delivered-To: samba at lists.samba.org
Received: from gc2a-hplh4.countygovt.brevard.fl.us
(mail.countygovt.brevard.fl.us [205.153.146.134]) by lists.samba.org
(Postfix) with SMTP id C6A5D5015 for <samba at lists.samba.org>; Wed, 13
Jun 2001 11:54:15 -0700 (PDT)
Received: by gc2a-hplh4.countygovt.brevard.fl.us with VINES-ISMTP; Wed,
13 Jun 2001 14:53:14 -0400
Date: Wed, 13 Jun 2001 14:58:20 -0400
Message-ID: <vines.MVC9+CTv7vA at gc2a-hplh4.countygovt.brevard.fl.us>
To: <samba at lists.samba.org>
From: <marion.haines at countygovt.brevard.fl.us>(Marion Haines)
Reply-To: <marion.haines at countygovt.brevard.fl.us>
Subject: RE: Network recycle bin in July issue of SysAdmin Mag
X-Incognito-SN: 28896
X-Incognito-Version: 5.1.0.78
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I was just looking at the same article and it says that the patches can be downloaded from:
ftp://ftp.amherst.edu/pub/samba
Marion D. Haines
marion.haines at countygovt.brevard.fl.us
Network Administrator
Board of County Commissioners
Brevard County, Florida
=============================
-----Original Message-----
From: "Kourosh Ghassemieh" <kourosh at loop.com>
Sent: Wednesday, June 13, 2001 1:54 PM
To: iSMTP at GC2A@Servers[<ctooley at amoa.org>]; iSMTP at GC2A@Servers[<samba at samba.org>]
Subject: Re: Network recycle bin in July issue of SysAdmin Mag
Sorry, I forgot to bring the issue in today. I'll
get you the URL tomorrow. The url for the
magazine is www.sysadminmag.com but they
don't have that article online, they only list the
article in the TOC.
At 12:43 PM 6/13/2001 -0500, you wrote:
>Do you have a url for the project?
>
>
>
>
>
>
>
>Kourosh Ghassemieh <kourosh at loop.com> on 06/13/2001 12:41:19 PM
>
>
>
> To: samba at samba.org
>
> cc: (bcc: Chris Tooley/AMOA)
>
>
>
> Subject Network recycle bin in July issue of SysAdmin
> : Mag
>
-
------------------------------------------------------------------------
Kourosh Ghassemieh
MindWare Information Systems & Technologies
9255 Sunset Blvd, Penthouse
West Hollywood CA 90069
(310) 729-1784
kourosh at loop.com
++++Networking Solutions for Your Business++++
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <MUCKLTR at mail.northgrum.com>
Delivered-To: samba at samba.org
Received: from ngedns.northgrum.com (ngedns.northgrum.com
[192.86.71.10]) by lists.samba.org (Postfix) with ESMTP id 4E6305082
for <samba at samba.org>; Wed, 13 Jun 2001 12:05:29 -0700 (PDT)
Received: from xcgny008.northgrum.com ([132.228.123.164]) by
ngedns.northgrum.com (8.9.1b+Sun/8.9.1) with SMTP id PAA26479 for
<samba at samba.org>; Wed, 13 Jun 2001 15:05:03 -0400 (EDT)
Received: from 132.228.123.164 by xcgny008.northgrum.com (InterScan
E-Mail VirusWall NT); Wed, 13 Jun 2001 15:04:57 -0400 (Eastern
Daylight Time)
Received: by XCGNY008 with Internet Mail Service (5.5.2650.21) id
<M6BQAJXK>; Wed, 13 Jun 2001 15:04:57 -0400
Message-ID: <A6DF07DBA946D111A99500A02461F98A04A695E2 at xcgfl002.mlb.esid.
northgrum.com>
From: "Mucklow, Travis" <MUCKLTR at mail.northgrum.com>
To: "'samba at samba.org'" <samba at samba.org>
Subject: C compiler/IRIX version requirements for samba?
Date: Wed, 13 Jun 2001 15:03:12 -0400
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2650.21)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hello, we are having trouble getting Samba to work. I read the Diagnosis
file but it assumes we got past the first step, the configuration. When I
run the ./configuration it fails and aborts when it tries to display the
summary. I've scrutinized the config.log and narrowed it down to a C
library file "types.h" that it receives all the errors from. I am assuming
its a version-compatibility mis-match. We are running Mipspro C compiler
version 7.3 on an IRIX 6.5.3 machine. Do we need to upgrade/downgrade or
does the problem lie somewhere else?
Travis Mucklow
Logicon, INC
Northrop Grumman Company
Internal Information Systems
Melbourne, FL
(321) 674 3573
Return-Path: <ctooley at amoa.org>
Delivered-To: samba at samba.org
Received: from amoa.org (amoa.org [207.207.51.226]) by lists.samba.org
(Postfix) with SMTP id DBBC95072 for <samba at samba.org>; Wed, 13 Jun
2001 12:15:11 -0700 (PDT)
Received: by amoa.org(Lotus SMTP MTA v4.6.5 (863.2 5-20-1999)) id
86256A6A.0069C4B9 ; Wed, 13 Jun 2001 14:15:16 -0500
X-Lotus-FromDomain: AMOA
From: ctooley at amoa.org
To: Kourosh Ghassemieh <kourosh at loop.com>
Cc: samba at samba.org
Message-ID: <86256A6A.0069C2E9.00 at amoa.org>
Date: Wed, 13 Jun 2001 14:15:10 -0500
Subject: RE: Network recycle bin in July issue of SysAdmin Mag
Mime-Version: 1.0
Content-type: text/plain; charset=us-ascii
Content-Disposition: inline
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Well, it does have a 2.2.0 directory so I'm assuming that's what to use for the
2.2 branch.
Chris
Kourosh Ghassemieh <kourosh at loop.com> on 06/13/2001 01:30:16 PM
To: samba at samba.org
cc: (bcc: Chris Tooley/AMOA)
Subject RE: Network recycle bin in July issue of
: SysAdmin Mag
Well, there you are =)
If somebody tries it please drop the list a line
and tell us how it works.
At 01:13 PM 6/13/2001 -0500, you wrote:
>Just read the article, myself. Patches and files are available at:
>ftp://ftp.amherst.edu/pub/samba/
>
>Bruce
>
> > -----Original Message-----
> > From: samba-admin at lists.samba.org [mailto:samba-admin at lists.samba.org]On
> > Behalf Of Kourosh Ghassemieh
> > Sent: Wednesday, June 13, 2001 12:54 PM
> > To: ctooley at amoa.org; samba at samba.org
> > Subject: Re: Network recycle bin in July issue of SysAdmin Mag
> >
> >
> > Sorry, I forgot to bring the issue in today. I'll
> > get you the URL tomorrow. The url for the
> > magazine is www.sysadminmag.com but they
> > don't have that article online, they only list the
> > article in the TOC.
-
------------------------------------------------------------------------
Kourosh Ghassemieh
MindWare Information Systems & Technologies
9255 Sunset Blvd, Penthouse
West Hollywood CA 90069
(310) 729-1784
kourosh at loop.com
++++Networking Solutions for Your Business++++
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <don_mccall at hp.com>
Delivered-To: samba at lists.samba.org
Received: from atlrel2.hp.com (atlrel2.hp.com [156.153.255.202]) by
lists.samba.org (Postfix) with ESMTP id 30DC0507E for
<samba at lists.samba.org>; Wed, 13 Jun 2001 12:16:44 -0700 (PDT)
Received: from xatlrelay1.atl.hp.com (xatlrelay1.atl.hp.com
[15.45.89.190]) by atlrel2.hp.com (Postfix) with ESMTP id 3D4261C46;
Wed, 13 Jun 2001 15:16:16 -0400 (EDT)
Received: from xatlbh4.atl.hp.com (xatlbh4.atl.hp.com [15.45.89.189]) by
xatlrelay1.atl.hp.com (Postfix) with ESMTP id 9048A1F50B; Wed, 13 Jun
2001 15:15:47 -0400 (EDT)
Received: by xatlbh4.atl.hp.com with Internet Mail Service (5.5.2653.19)
id <MZ68L346>; Wed, 13 Jun 2001 15:16:15 -0400
Message-ID: <079FD72E42C9D311B854009027650E6F04050AC2 at xatl02.atl.hp.com>
From: "MCCALL,DON (HP-USA,ex1)" <don_mccall at hp.com>
To: 'Alexander Skwar' <ASkwar at DigitalProjects.com>, "MCCALL,DON
(HP-USA,ex1)" <don_mccall at hp.com>
Cc: becker at lufa-sp.vdlufa.de, Craig Kelley <ink at inconnu.isu.edu>,
samba at lists.samba.org
Subject: RE: Windows 95 clients cannot connect (Wins Server)
Date: Wed, 13 Jun 2001 15:16:13 -0400
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Alexander said:
No, that's not what I'm having. Can I enter adresses for WINS servers if
I'm using DHCP? If not, would it help if I'd create a lmhosts file in
C:\Windows? Suppose I have two servers - the 1st being a Samba server, the
2nd a NT 4.0 server:
IP DNS name/host name Netbios name
4711 fp.delphi jt
0815 atlas.delphi de-42119-w01
Would it help, if I'd create a lmhosts file like this:
4711 fp.delphi jt
0815 atlas.delphi de-42119-w01
^^^^^^^^^^nope, lmhosts file is expecting a particular format; netbiosname
ipaddress ....
Or would I still need to setup a WINS server? Suppose I'd take the Samba
server to be my WINS server, what would I have to do? Other than setting
these in the global section:
wins support = yes
wins proxy = yes
^^^^^^^^^^^^^^^^^that should do it; then you would need to set each of your
clients
to use the ipaddress of your samba server as its primary wins server, so
they would
go to it to resolve netbios names.
What other precautions do I need to make? Would I need to create the
aforementioned lmhosts file on my Samba server in /etc, and that's it?
Would 95 clients than be able to connect to \\jt\ShareName?
^^^yep - basically all of your clients need some way to resolve the name
'jt'
(and de-42119-w01 for that matter) to their respective ip addresses. You
can either
add the name and ipaddress in the lmhosts file on each of your clients, and
enable lmhosts lookup,
or you can make your samba server a wins server (as mentioned above) and set
each client to
use it as their primary wins server,
or you could register your netbios names in dns and have all of your clients
use dns for their
name lookup.
OR - if your clients are on the same wire/subnet as the server, they will be
able to resolve the
netbios name to an ipaddress via microsofts default netbios broadcast
service (nns - netbios name service)...
Best choose one and stick to it...
Ich hoffe es ist helflich...
(forgive my poor german...)
Don
Alexander Skwar
--
How to quote: http://learn.to/quote (german) http://quote.6x.to (english)
Homepage: http://www.digitalprojects.com | http://www.iso-top.de
iso-top.de - Die g|nstige Art an Linux Distributionen zu kommen
Uptime: 21 hours 43 minutes
Return-Path: <askwar at digitalprojects.com>
Delivered-To: samba at lists.samba.org
Received: from mailout00.sul.t-online.de (mailout00.sul.t-online.com
[194.25.134.16]) by lists.samba.org (Postfix) with ESMTP id 7B2AB5038
for <samba at lists.samba.org>; Wed, 13 Jun 2001 12:37:00 -0700 (PDT)
Received: from fwd01.sul.t-online.de by mailout00.sul.t-online.de with
smtp id 15AGQp-0001bg-0V; Wed, 13 Jun 2001 21:35:59 +0200
Received: from teich.garten.digitalprojects.com
(510044997847-0001@[62.226.92.85]) by fmrl01.sul.t-online.com with
esmtp id 15AGQm-1sQ0lkC; Wed, 13 Jun 2001 21:35:56 +0200
Received: by teich.garten.digitalprojects.com (Postfix, from userid 501)
id 110D318173; Wed, 13 Jun 2001 21:35:52 +0200 (CEST)
Date: Wed, 13 Jun 2001 21:35:52 +0200
From: Alexander Skwar <ASkwar at DigitalProjects.com>
To: "MCCALL,DON (HP-USA,ex1)" <don_mccall at hp.com>
Cc: becker at lufa-sp.vdlufa.de, Craig Kelley <ink at inconnu.isu.edu>,
samba at lists.samba.org
Subject: Re: Windows 95 clients cannot connect (Wins Server)
Message-ID: <20010613213552.Q26168 at Garten.DigitalProjects.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 7bit
In-Reply-To: <079FD72E42C9D311B854009027650E6F04050AC2 at xatl02.atl.hp.com
>
User-Agent: Mutt/1.3.18i
X-Operating-System: An i686 Linux with Kernel v2.4.3-27mdk
X-Face: nope
X-Sender: 510044997847-0001 at t-dialin.net
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
So sprach MCCALL,DON (HP-USA,ex1) am Wed, Jun 13, 2001 at 03:16:13PM -0400:
>
> 4711 fp.delphi jt
> 0815 atlas.delphi de-42119-w01
>
> ^^^^^^^^^^nope, lmhosts file is expecting a particular format; netbiosname
> ipaddress ....
Okay, so would this be correct?
jt 4711
de-42119-w01 0815
(4711 and 0815 being the ip adresses)
> ^^^^^^^^^^^^^^^^^that should do it; then you would need to set each of your
> clients
> to use the ipaddress of your samba server as its primary wins server, so
> they would
> go to it to resolve netbios names.
Okay, but can I do this if I run DHCP on the clients and cannot modify the
information sent out via DHCP?
> ^^^yep - basically all of your clients need some way to resolve the name
> 'jt'
> (and de-42119-w01 for that matter) to their respective ip addresses. You
> can either
> add the name and ipaddress in the lmhosts file on each of your clients, and
> enable lmhosts lookup,
> or you can make your samba server a wins server (as mentioned above) and
set
> each client to
> use it as their primary wins server,
> or you could register your netbios names in dns and have all of your
clients
> use dns for their
> name lookup.
> OR - if your clients are on the same wire/subnet as the server, they will
be
> able to resolve the
> netbios name to an ipaddress via microsofts default netbios broadcast
> service (nns - netbios name service)...
Okay, since I cannot modify the DNS and since the clients are not on the
same subnets as my servers and since I do not really want to modify/add a
lmhosts on each and every client, WINS seems to be the best option for me.
The WINS server does not need to be on the same subnet as the client,
correct? (Ah, yes, earlier on someone already mentioned that they do not
need to be)
On the clients, I then would have them connect to \\jt, correct? Now, since
they do not know the IP adress of jt, they connect to my WINS server
(Samba). Samba then does a lookup in the systems lmhosts and returns the IP
4711. Now the client connects to 4711. Is that how it works (basically)?
> Ich hoffe es ist helflich...
*SEHR* hilfreich! VIELEN, VIELEN Dank!
> (forgive my poor german...)
No, unless you forgive my poor Englisch :)
Alexander Skwar
--
How to quote: http://learn.to/quote (german) http://quote.6x.to (english)
Homepage: http://www.digitalprojects.com | http://www.iso-top.de
iso-top.de - Die g|nstige Art an Linux Distributionen zu kommen
Uptime: 22 hours 38 minutes
Return-Path: <naughton at domino.danielwoodhead.com>
Delivered-To: samba at samba.org
Received: from S104TKKM.DANIELWOODHEAD.COM (unknown [207.208.161.4]) by
lists.samba.org (Postfix) with ESMTP id 317AF4DB3 for
<samba at samba.org>; Wed, 13 Jun 2001 12:51:16 -0700 (PDT)
Subject: Re: 2.2.0 binaries for redhat 7.1
To: Tom Diehl <tdiehl at pil.net>
Cc: samba at samba.org
X-Mailer: Lotus Notes Release 5.0.2c February 2, 2000
Message-ID: <OF0D45A48B.B0873048-ON86256A6A.006CA2B0 at DANIELWOODHEAD.COM>
From: naughton at domino.danielwoodhead.com
Date: Wed, 13 Jun 2001 14:50:22 -0500
X-MIMETrack: Serialize by Router on server2/dwco(Release 5.0.2c
|February 2, 2000) at 06/13/2001 02:50:33 PM
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Thanks Tom,
There were some new readline packages created to address some of the
depedency problems in the 2.2.0 RH71 rpms available from rawhide. Someone
at RedHat was nice enough to redo them to correct the problem. They were
"ftprsync'd" to the various mirrors. I haven't tracked them down yet, but
allegedly there are RH71 rpms available to 2.2.0 that don't have
installation (dependency) problems.
Dan Naughton
Return-Path: <prea at uninsubria.it>
Delivered-To: samba at lists.samba.org
Received: from mull.uninsubria.it (ns.uninsubria.it [193.206.179.2]) by
lists.samba.org (Postfix) with ESMTP id A8C6E47B1 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 13:07:21 -0700 (PDT)
Received: from six (six.dipbsf.uninsubria.it [193.206.172.50]) by
mull.uninsubria.it (8.11.4/8.11.2) with ESMTP id f5DK6t301253 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 22:06:56 +0200
From: "Damiano G. Preatoni" <prea at uninsubria.it>
Organization: =?ISO-8859-1?Q?UAGB_-_DBSF_Universit=E0_degli_Studi_dell'I
ns?=
To: samba at lists.samba.org
Date: Wed, 13 Jun 2001 22:06:54 +0200
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
Subject: Profiles problems (again!)
Reply-To: prea at uninsubria.it
Message-ID: <3B27E3FE.7051.15D657E at localhost>
Priority: normal
X-mailer: Pegasus Mail for Win32 (v3.12c)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi listers!
I'm switching from 2.0.7 to 2.2.0 (RPM, samba-2.2.0-20010417, on
a RH 6.2), and encountered a problem with user profiles.
My linux users belong to a base "users" group, and some of them
have "uagb" and/or "udc" as secondary groups.
This is intended to put up a three-level security on the SMB shared
filesystem, i. e. on certain reserved directories "users"can do
nothing, "uagb" can read only and udc can do rw.
The admin group (see enclosed smb.conf) is also the domain
admin group.
login script and [profile] are inplemented as specified in samba
docs and in the infamous :) "Guide to Microsoft Windows NT 4.0
Profiles and Policies".
The problem is that top-level users work nicely, whereas "uagb"
(2nd level) and "users" (the poos guys) have registry write
problems on NT4 SP6a workstations.
Anyone can tell me where I screwed up my config?
TIA
----- begins smb.conf -----
# /etc/smb.conf
# dgp 19/08/2000
# version 3.0
# changed 31/03/2001
#
# changelog
; 30/08/2000: 2.02 - printer support is now handled by a NetPort 10
(//PS-ROSSO/LASER, //PS-ROSSO/COLOR)
; 31/03/2001: 3.00 - revised whole config, changed profile handling
;
;*******************section global*****************
[global]
case sensitive = no
character set = ISO8859-1
client code page = 850
create mask = 0664
dead time = 0
debug level = 0
default case = lower
delete readonly = yes
directory mask = 0770
dns proxy = no
domain admin group = @udc
domain admin users = prea
;domain group map = /etc/samba/groups.map ;deprecated
domain groups = @users @uagb @udc
domain logons = yes
domain master = yes
dos filetimes = yes
encrypt passwords = yes
follow symlinks = yes
fstype = Samba
hide dot files = yes
invalid users = root bin daemon adm sync shutdown halt mail news
uucp operator gopher
kernel oplocks = yes
load printers = no
local master = yes
lock directory = /var/lock/samba
log file = /var/log/samba/log.%m
logon drive = G:
logon home = \\%L\%U
logon path = \\%L\profile\%U
logon script = scripts\default.bat
mangle case = yes
mangled names = no
map to guest = never
max log size = 50 # kb
netbios name = MALAUSSENE
nt acl support = yes
null passwords = no
os level = 64
passwd chat = *New*UNIX*password* %n\n
*ReType*new*UNIX*password* %n\n
*passwd:*all*authentication*tokens*updated*successfully*
passwd program = /usr/bin/passwd %u
password level = 8
preferred master = yes
preserve case = yes
printcap name = /etc/printcap
security = user
server string = UAGB Workgroup server (Samba %v)
short preserve case = yes
smb passwd file = /etc/samba/smbpasswd
socket options = TCP_NODELAY SO_RCVBUF=8192
SO_SNDBUF=8192
status = yes
time server = yes
unix password sync = yes
unix realname = yes
username level = 8
username map = /etc/samba/users.map
wide links = yes
wins support = no
workgroup = UAGB
;*******************section homes*****************
[homes]
browseable = no
comment = %U home directory
public = no
writable = yes
;*******************section netlogon*****************
[netlogon]
comment = Domain Logon Service (Samba %v)
path = /usr/local/samba/netlogon
public = no
writeable = no
write list = @ntadmin
;*******************section profile*****************
[profile]
comment = User profile directory on %L (Samba %v)
path = /home/profile
create mask = 0600
directory mask = 0700
writeable = yes
browsable = no
; try it
map hidden = yes
map system = yes
;*******************section printers*****************
[printers]
browseable = no
comment = Printers on %L
path = /var/spool/samba
printable = yes
public = no
writable = no
;*******************section SCAMBIO*****************
[SCAMBIO]
browseable = yes
comment = UAGB shared directory
only user = no
path = /home/share
public = no
valid users = @users, @udc
writable = yes
write list = @users, @udc
[TEST]
browseable = yes
comment = test share
only user = no
path = /home/test
public = no
valid users = @users, @udc
writeable = yes
write list = @users, @udc
;*******************section UDC*****************
[UDC]
comment = UAGB hacks directory
browseable = yes
path = /usr/UDC
public = no
guest only = no
writable = yes
valid users = @users, @udc
only user = no
write list = @udc
;*******************section IMG*****************
[IMG]
comment = UAGB pictures directory
browseable = yes
path = /usr/img
public = no
guest only = no
writable = yes
valid users = @users, @udc
only user = no
write list = @users
;*******************section CD*****************
[ARCHIVIO]
comment = UAGB archive directory
browseable = yes
path = /share
public = no
guest only = no
writable = yes
valid users = @users, @udc
only user = no
write list = martinol, prea, simona, badiello
;*******************section GIS*****************
[GIS]
comment = GIS data
browseable = yes
path = /home/gis
public = no
guest only = no
writable = yes
valid users = @users, @udc
only user = no
write list = @users, @udc
;*******************section DBSF*****************
[DBSF]
comment = Proxy to DBSF0 server
browseable = yes
path = /mnt/netware
public = yes
guest only = no
writable = yes
valid users = @users, @udc
only user = no
write list = @users, @udc
;*******************section FTP*****************
[FTP]
comment = FTP public directory on %h
browseable = yes
path = /home/ftp
public = no
guest only = no
writable = yes
valid users = @users, @udc
only user = no
write list = @udc
admin users = prea, badiello
;*******************section WWW*****************
[WWW]
comment = WWW public directory on %h
browseable = yes
path = /home/httpd/html
public = no
guest only = no
writable = yes
valid users = @udc
only user = no
write list = prea, martinol
admin users = prea, martinol
=========================================================
Damiano G. Preatoni
Dept. of Structural and Functional Biology
Faculty of Sciences - University of Insubria
Via J. H. Dunant, 3 - 21100 Varese - Italy
ph. +39 0332 421 538; fax +39 0332 421554
http://fauna.dipbsf.uninsubria.it/
ICQ #78690321
Odigo #2645129
=========================================================
"Advice is a dangerous gift.
Even from the wise to the wise.
For all courses may run ill."
J.R.R. Tolkien,
The Lord of the Rings
Return-Path: <Kirk.Shimek at trw.com>
Delivered-To: samba at lists.samba.org
Received: from mailhub2a.TRW.COM (unknown [12.31.44.5]) by
lists.samba.org (Postfix) with ESMTP id 520284D9A for
<samba at lists.samba.org>; Wed, 13 Jun 2001 13:09:04 -0700 (PDT)
Received: from navieg3.trw.com by mailhub-oh.trw.com for
samba at lists.samba.org; Wed, 13 Jun 2001 16:08:18 -0400
Received: (from gwisegwc [129.193.170.159]) by navieg3 (NAVIEG 2.1 bld
63) with SMTP id M2001061316055710539 for <samba at lists.samba.org>;
Wed, 13 Jun 2001 16:05:57 -0400
Received: from TRW-MH-Message_Server by gwisegwc with Novell_GroupWise;
Wed, 13 Jun 2001 16:08:13 -0400
Message-Id: <sb278fed.047 at gwisegwc>
X-Mailer: Novell GroupWise Internet Agent 5.5.5.1
Date: Wed, 13 Jun 2001 16:08:02 -0400
From: "Kirk Shimek" <Kirk.Shimek at trw.com>
To: <samba at lists.samba.org>
Subject: Moving Samba Server Between Domains
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Converted-To-Plain-Text: from multipart/alternative by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Samba 2.0.6
AIX 4.3.3
Current Domain: NT4.0
New Domain: 2000 Active Directory
What are the steps to remove the samba server from its current NT4.0 domain
and then re-join the 2000 Active Directory domain?
Kirk Shimek
Return-Path: <wolfgang at noefs.ping.de>
Delivered-To: samba at lists.samba.org
Received: from noefs.ping.de (ping-ef-gw.ping.de [62.72.90.14]) by
lists.samba.org (Postfix) with ESMTP id BAAEC50BE for
<samba at lists.samba.org>; Wed, 13 Jun 2001 15:38:39 -0700 (PDT)
Received: (from wolfgang at localhost) by noefs.ping.de (8.9.3/8.9.3) id
AAA23984; Thu, 14 Jun 2001 00:28:54 +0200
Message-Id: <200106132228.AAA23984 at noefs.ping.de>
Subject: Re: Half encryption? :-)
In-Reply-To: <079FD72E42C9D311B854009027650E6F04050AC0 at xatl02.atl.hp.com
> from "MCCALL,DON (HP-USA,ex1)" at "Jun 13, 2001 11:08:40 am"
To: "MCCALL,DON (HP-USA,ex1)" <don_mccall at hp.com>
Date: Thu, 14 Jun 2001 00:28:53 +0200 (MEST)
Cc: samba at lists.samba.org
From: Wolfgang Wegner <wolfgang at leila.ping.de>
X-Mailer: ELM [version 2.4ME+ PL60 (25)]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hello Don,
> Hallo Wolfgang;
> I could be wrong ,but the way I understand it, is winNT and win2k (and
> winME, I believe), if they are set to EnablePlainTextPassword in the
> registry, will first attempt to negotiate protocol WITH encryption required;
[...]
> actually do the plaintext negotiation, and embed the plaintext password in
> the sessionSetup&X packet, it forces you to enter something explicit for the
[...]
that is exactly what I thought I saw with ethereal, but I did
not completely understand this, and so I did not mention it.
> net use \\sambaserver\\sambashare "" /user:""
>
> That will establish a connection with the server, so your printing will
> work. It's ugly, but it might help you out...
Yes, I will try this when I am back at work and have some time left.
Although, as far as I experienced this, this means the users can not
mount their home directories without problems, because then WinNT
or the server remember the "wrong" username...
(I already found the option revalidate and set "revalidate = yes" in the
homes section, but I did not find a difference...) I will try all this
again and see what it helps.
As someone else asked:
I already set guest ok = yes for the global and each printer section,
but this does not bypass the stupid behaviour of the NT/Win2k clients,
as Don described above.
So, as far as I saw from the ethereal dump when connecting to a
WinNT server, the server could do a dummy encrypted authentication
and then du the real authentication in plaintext (or did I miss
anything there? Sorry, I really do not understand the protocol...).
>
> Don
Thanks,
Wolfgang
Return-Path: <abartlet at pcug.org.au>
Delivered-To: samba at lists.samba.org
Received: from dnscache.cbr.au.asiaonline.net
(dnscache.cbr.au.asiaonline.net [210.215.8.100]) by lists.samba.org
(Postfix) with ESMTP id 3B188449C for <samba at lists.samba.org>; Wed, 13
Jun 2001 16:33:10 -0700 (PDT)
Received: from piglett.bartlett.house (as2-189.cbr.au.asiaonline.net
[210.215.10.189]) by dnscache.cbr.au.asiaonline.net (8.10.2/8.10.2)
with ESMTP id f5DNWHq11323; Thu, 14 Jun 2001 09:32:17 +1000 (EST)
Received: from yowiee.bartlett.house (IDENT:root at yowiee.bartlett.house
[192.168.1.99]) by piglett.bartlett.house (8.9.3/8.8.7) with ESMTP id
JAA16042; Thu, 14 Jun 2001 09:31:51 +1000
Received: from bartlett.house (IDENT:abartlet at piglett.bartlett.house
[192.168.1.1]) by yowiee.bartlett.house (8.9.3/8.8.7) with ESMTP id
JAA20565; Thu, 14 Jun 2001 09:31:45 +1000
Message-ID: <3B27F7E1.97AC9EA5 at bartlett.house>
Date: Thu, 14 Jun 2001 09:31:45 +1000
From: Andrew Bartlett <abartlet at pcug.org.au>
X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.19-6.2.1 i686)
X-Accept-Language: en
MIME-Version: 1.0
To: Yan Seiner <yan at cardinalengineering.com>
Cc: Andrew Bartlett <abartlet at pcug.org.au>, samba at lists.samba.org
Subject: Re: samba + NIS
References: <3B274AFA.8010704 at cardinalengineering.com>
<3B2765FC.71E2DB37 at bartlett.house>
<3B2799E7.7030907 at cardinalengineering.com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Security=server (or security=domain, the preferable option) helps in
that you don't need samba to maintain an smbpasswd file on each machine,
passwords are checked against the server. But given the non-permenent
nature of the link, I would suggest just rsyncing the smbpasswd files
back each night. (and if your not using rsync already, you should be).
Andrew Bartlett
Yan Seiner wrote:
>
> Andrew:
>
> My setup is like this:
>
> +----- office 1
> Main server ----+----- office 2
> +----- office 3
>
> Changes made to files at any of these locations are propagated back to
> the main server every night. The remote offices use vpn over dial-up,
> so real-time authentication back to the main is not practical.
>
> The way I understand NIS, the maps are pushed on demand from the main
> server, which is what I want.
>
> Each office is set up as a stand-alone samba server. The only time the
> main server is accessed is for a new DNS query (the remotes use caching
> only name servers) and for time sync.
>
> I want to make sure that users are synchronized and that they have the
> same UID/GID on all servers.
>
> My clients are win98/winME boxes.
>
> I'm not sure how security=server would help me in this setup.
>
> Thanks.
>
> --Yan
>
> Andrew Bartlett wrote:
>
> > Yan Seiner wrote:
> >
> >>Is there a HOW-TO or a doc somewhere for setting up samba + NIS? I've
> >>looked in the archives and on the web and couldn't find anything.
> >>
> >>I am considering NIS so that I can have the same users on my three
> >>servers, so I would need to set up a master and two slaves. But how do
> >>I get samba to use NIS for smbpasswd? Or am I missing something really
> >>basic?
> >>
> >>I have been working with samba for a few years, but have never worked
> >>with NIS, so this may be a very stupid question.
> >>
> >>
> >
> > Probably better to use secuirty=domain or secuirty=server, and do away
> > with the need for the smbpasswd file. I run security=server and NIS
> > here, and havn't noticed any problems.
> >
> > Andrew Bartlett
> >
> >
--
Andrew Bartlett
abartlet at pcug.org.au
Return-Path: <tpot at samba.org>
Delivered-To: samba at lists.samba.org
Received: by lists.samba.org (Postfix, from userid 1007) id F134244A7;
Wed, 13 Jun 2001 16:48:35 -0700 (PDT)
From: Tim Potter <tpot at valinux.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Message-ID: <15143.64122.217076.583413 at frungy.org>
Date: Thu, 14 Jun 2001 09:42:50 +1000 (EST)
To: "M. Kilroy" <mekilroy at risingedge.com>
Cc: <samba at lists.samba.org>, <samba-ntdom at lists.samba.org>
Subject: Re: more newbie questions
In-Reply-To: <015401c0f435$c9557980$1a00a8c0 at diamondback>
References: <015401c0f435$c9557980$1a00a8c0 at diamondback>
X-Mailer: VM 6.75 under Emacs 20.7.2
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
M. Kilroy writes:
> The latest winbind man says to do:
>
> samedit -S '*' -W DOMAIN -UAdministrator
> then,
> createuser MACHINE$ -j DOMAIN -L
OK, the manual page is a bit out of date in this respect. HEAD
cannot join a domain using the administrator name and password.
> but when I try to run either I get errors because I do not have
> samedit or createuser on my linux box for some reason. So
> instead I used "smbpasswd -j DOMAIN -r PDC" after creating an
> account for the linux box in the domain on my PDC. Does this
> cause any problems with winbind or authentication??
It should work fine. I think your authentication problems are
due to some incomplete code in pam_winbind.c I haven't finished
merging that part of winbind from the TNG branch yet. )-:
Tim.
Return-Path: <lists at conet.cz>
Delivered-To: samba at lists.samba.org
Received: from conetux.conet.cz (conetux.conet.cz [194.213.232.146]) by
lists.samba.org (Postfix) with ESMTP id 6DBF346D6 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 17:11:57 -0700 (PDT)
Received: from liborek (liborek [192.168.1.130]) by conetux.conet.cz
(8.11.0/8.11.0) with SMTP id f5DNBbA01033 for <samba at lists.samba.org>;
Thu, 14 Jun 2001 01:11:38 +0200
Message-ID: <003b01c0f466$963f8280$8201a8c0 at liborek>
From: =?iso-8859-2?Q?Libor_Van=ECk?= <lists at conet.cz>
To: <samba at lists.samba.org>
Subject: What can ACL do?
Date: Thu, 14 Jun 2001 02:11:39 +0200
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-2"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.00.2919.6700
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hello,
I'd like to ask - what can ACLs (on XFS+Samba 2.2) do for me? I was unable
to find this out. I thought that I can setup rights like "john:rwx,
jack:r--" but I wasn't (W2k) - I was only able to setup rwx for
user/group/others :(
Libor Vanek
Return-Path: <degraaf at rhsnet.com>
Delivered-To: samba at lists.samba.org
Received: from imf05bis.bellsouth.net (mail205.mail.bellsouth.net
[205.152.58.145]) by lists.samba.org (Postfix) with ESMTP id 02A724420
for <samba at lists.samba.org>; Wed, 13 Jun 2001 17:17:38 -0700 (PDT)
Received: from datium.datix.com ([208.63.181.50]) by
imf05bis.bellsouth.net (InterMail vM.5.01.01.01 201-252-104) with
ESMTP id
<20010614001755.OLBX7203.imf05bis.bellsouth.net at datium.datix.com>;
Wed, 13 Jun 2001 20:17:55 -0400
Received: (from dad at localhost) by datium.datix.com (8.11.2/8.11.2) id
f5E0H5j18631; Wed, 13 Jun 2001 20:17:05 -0400
Message-Id: <200106140017.f5E0H5j18631 at datium.datix.com>
Subject: Printer access (bug?)
To: samba at lists.samba.org (Samba List)
Date: Wed, 13 Jun 2001 20:17:05 -0400 (EDT)
Cc: alexi at wwood.co.uk, srd at erols.com (Stuart (erols.com) De Graaf),
thyberg at mindspring.com (Robert C. Thyberg), phartwick at masteryworks.com
(Peter Hartwick)
From: degraaf at rhsnet.com
X-Mailer: ELM [version 2.5 PL3]
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
After upgrading my several machines to Red Hat 7.1, with
LPRng-3.7.4-22, and samba 2.2.0, I could no longer print from W98.
To explore this I tried smbclient with this result:
$ smbclient \\\\datium\\lp
INFO: Debug class all level = 3 (pid 2242 from pid 2242)
added interface ip=192.168.7.9 bcast=192.168.7.255 nmask=255.255.255.0
added interface ip=192.168.8.9 bcast=192.168.8.255 nmask=255.255.255.0
added interface ip=127.0.0.1 bcast=127.255.255.255 nmask=255.0.0.0
Got a positive name query response from 127.0.0.1 (192.168.7.9 192.168.8.9 )
Password:
Anonymous login successful
Domain=[SAMBA] OS=[Unix] Server=[Samba 2.2.0]
smb: \> print -
ERRDOS - ERRnoaccess (Access denied.) opening remote file stdin-2242
smb: \> q
So samba was trying to write "stdin-2242", but could not.
I had no clue where this file was being written,
or why it failed.
I discovered this curious fact:
\\\\datium\\lp - fails
\\\\datium\\minolta - succeeds
\\\\datium\\canon - succeeds
where lp and minolta are synonyms in /etc/printcap for the local
laser printer and canon is a remote bubblejet on another Linux box.
My smb.conf has these relevant parts:
[global]
load printers = yes
guest account = pcguest
[printers]
comment = All Printers
path = /var/spool/samba
printing = lprng
guest ok = yes
printable = yes
print command = /usr/bin/lpr -P%p -r %s
lpq command = /usr/bin/lpq -P%p
lprm command = /usr/bin/lprm -P%p %j
lppause command = /usr/sbin/lpc hold %p %j
lpresume command = /usr/sbin/lpc release %p %j
queuepause command = /usr/sbin/lpc -P%p stop
queueresume command = /usr/sbin/lpc -P%p start
I had made sure that the specified spool directory was segregated and
had open permissions:
drwxrwxrwt 2 root root 4096 Jun 13 15:56 /var/spool/samba
Alexi Margo (alexi at wwood.co.uk) reported the same problem last Jan
but got no response. Based on his suggestion, I opened the permissions
on /var/spool/lpd, too:
drwxrwxrwt 4 root root 4096 Jun 13 13:45 /var/spool/lpd
and discovered that \\\\datium\\lp no longer failed to open stdin...
but dropped such a file into /var/spool/lpd. However, the job was not
spooled; the file containing the print text just sat there.
I was surprised to see samba treating minolta and lp differently,
because they are the same printer. One is just a different name
for the other. And I was especially surprised that printing to "lp"
would mess with /var/spool/lpd, despite having a specific declaration to
use /var/spool/samba. So on a hunch, I added a specific share definition
for [lp], which is identical to that for [printers] in general, and now
it works!
As Nero Wolfe might say, I am flummoxed.
So, to summarize, my printing problems went away when I redundantly
specified rules for [lp] that are identical to [printers].
All this raises some important questions:
1) Why does samba treat lp differently from minolta when the
[printer] section is supposed to cover _all_ printers?
2) Where did it get the notion to use /var/spool/lpd for any
purpose, whatever?
3) Could the error message
ERRDOS - ERRnoaccess (Access denied.) opening remote file stdin-2242
be modified to tell the full pathname of the file that couldn't be
opened? That would have saved me considerable time.
Let me add this.
When the level of bug complaints become as picayune as this,
it speaks volumes for the quality of the samba product.
Many thanks to all the Samba Team.
--
David A. De Graaf DATIX, Inc. Hendersonville, NC
degraaf at rhsnet.com (828) 696-8646; fax (828) 694-1037
Return-Path: <yan at seiner.com>
Delivered-To: samba at lists.samba.org
Received: from cardinalengineering.com (bftc5p68.islc.net
[63.71.113.68]) by lists.samba.org (Postfix) with ESMTP id 5B4CA50F9
for <samba at lists.samba.org>; Wed, 13 Jun 2001 17:19:40 -0700 (PDT)
Received: (from mail at localhost) by cardinalengineering.com (8.9.3/8.9.3)
id UAA14978 for <samba at lists.samba.org>; Wed, 13 Jun 2001 20:19:14
-0400
X-Authentication-Warning: aphrodite.cardinal.lan: mail set sender to
<yan at seiner.com> using -f
X-Authentication-Warning: aphrodite.cardinal.lan: Processed from queue
/var/spool/mqpost-amavis
X-Authentication-Warning: aphrodite.cardinal.lan: Processed by mail with
-C /etc/sendmail.orig.cf
Received: from seiner.com (IDENT:yan at oberon-r.cardinal.lan
[192.168.128.148]) by cardinalengineering.com (8.9.3/8.9.3) with ESMTP
id UAA14796; Wed, 13 Jun 2001 20:19:06 -0400
Message-ID: <3B27F53C.6080509 at seiner.com>
Date: Wed, 13 Jun 2001 19:20:28 -0400
From: Yan Seiner <yan at seiner.com>
User-Agent: Mozilla/5.0 (X11; U; Linux 2.2.19 i686; en-US; rv:0.9.1)
Gecko/20010608
X-Accept-Language: cs, en
MIME-Version: 1.0
To: Andrew Bartlett <abartlet at pcug.org.au>
Cc: samba at lists.samba.org
Subject: Re: samba + NIS
References: <3B274AFA.8010704 at cardinalengineering.com>
<3B2765FC.71E2DB37 at bartlett.house>
<3B2799E7.7030907 at cardinalengineering.com>
<3B27F7E1.97AC9EA5 at bartlett.house>
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
X-AntiVirus: scanned for viruses by AMaViS 0.2.1 (http://amavis.org/)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
And what about the passwd file and the shadow file? I know this is
getting a bit off-topic, but I'm trying to actually mirror the server
data and all users to each location.
I use unison, a bit different than rsync, but same idea. I use rsync
for some applications.
--Yan
Andrew Bartlett wrote:
>Security=server (or security=domain, the preferable option) helps in
>that you don't need samba to maintain an smbpasswd file on each machine,
>passwords are checked against the server. But given the non-permenent
>nature of the link, I would suggest just rsyncing the smbpasswd files
>back each night. (and if your not using rsync already, you should be).
>
Return-Path: <abartlet at pcug.org.au>
Delivered-To: samba at lists.samba.org
Received: from dnscache.cbr.au.asiaonline.net
(dnscache.cbr.au.asiaonline.net [210.215.8.100]) by lists.samba.org
(Postfix) with ESMTP id 8B0BB50F0 for <samba at lists.samba.org>; Wed, 13
Jun 2001 17:35:12 -0700 (PDT)
Received: from piglett.bartlett.house (as2-189.cbr.au.asiaonline.net
[210.215.10.189]) by dnscache.cbr.au.asiaonline.net (8.10.2/8.10.2)
with ESMTP id f5E0YTq19363; Thu, 14 Jun 2001 10:34:33 +1000 (EST)
Received: from yowiee.bartlett.house (IDENT:root at yowiee.bartlett.house
[192.168.1.99]) by piglett.bartlett.house (8.9.3/8.8.7) with ESMTP id
KAA16302; Thu, 14 Jun 2001 10:34:05 +1000
Received: from bartlett.house (IDENT:abartlet at piglett.bartlett.house
[192.168.1.1]) by yowiee.bartlett.house (8.9.3/8.8.7) with ESMTP id
KAA20795; Thu, 14 Jun 2001 10:34:05 +1000
Message-ID: <3B28067D.8601B079 at bartlett.house>
Date: Thu, 14 Jun 2001 10:34:05 +1000
From: Andrew Bartlett <abartlet at pcug.org.au>
X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.19-6.2.1 i686)
X-Accept-Language: en
MIME-Version: 1.0
To: Yan Seiner <yan at seiner.com>
Cc: Andrew Bartlett <abartlet at pcug.org.au>, samba at lists.samba.org
Subject: Re: samba + NIS
References: <3B274AFA.8010704 at cardinalengineering.com>
<3B2765FC.71E2DB37 at bartlett.house>
<3B2799E7.7030907 at cardinalengineering.com>
<3B27F7E1.97AC9EA5 at bartlett.house> <3B27F53C.6080509 at seiner.com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I thought you said you had this sorted with NIS?
Samba makes the same getpwnam() calls as everbody else, so its doesn't
actualy care what provides the results, as long as they are provided.
The only reason there are even uids in the smbpasswd file is as a
sainity check.
Andrew Bartlett
Yan Seiner wrote:
>
> And what about the passwd file and the shadow file? I know this is
> getting a bit off-topic, but I'm trying to actually mirror the server
> data and all users to each location.
>
> I use unison, a bit different than rsync, but same idea. I use rsync
> for some applications.
>
> --Yan
>
> Andrew Bartlett wrote:
>
> >Security=server (or security=domain, the preferable option) helps in
> >that you don't need samba to maintain an smbpasswd file on each machine,
> >passwords are checked against the server. But given the non-permenent
> >nature of the link, I would suggest just rsyncing the smbpasswd files
> >back each night. (and if your not using rsync already, you should be).
> >
--
Andrew Bartlett
abartlet at pcug.org.au
Return-Path: <S_Elble at yahoo.com>
Delivered-To: samba at lists.samba.org
Received: from avocet.mail.pas.earthlink.net
(avocet.mail.pas.earthlink.net [207.217.121.50]) by lists.samba.org
(Postfix) with ESMTP id 8CE7F5110 for <samba at lists.samba.org>; Wed, 13
Jun 2001 17:38:04 -0700 (PDT)
Received: from gateway (dhcp181-19-151-24.nm01-c3.cpe.charter-ne.com
[24.151.19.181]) by avocet.mail.pas.earthlink.net (EL-8_9_3_3/8.9.3)
with SMTP id RAA13826; Wed, 13 Jun 2001 17:37:23 -0700 (PDT)
Message-ID: <003b01c0f469$d99d9320$0600a8c0 at gateway>
Reply-To: "Sean P. Elble" <S_Elble at yahoo.com>
From: "Sean P. Elble" <S_Elble at yahoo.com>
To: =?iso-8859-2?Q?Libor_Van=ECk?= <lists at conet.cz>,
<samba at lists.samba.org>
References: <003b01c0f466$963f8280$8201a8c0 at liborek>
Subject: Re: What can ACL do?
Date: Wed, 13 Jun 2001 20:35:00 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-2"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4522.1200
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Well, you _can_ have very fine-grained access control with the XFS ACLs with
Samba 2.2, and it can all be done with Windows 2000. I had a very similar
problem; if you are using the RPMs graciously provided by the Samba team,
get rid of them; they don't have ACL support, nor do they have support for
the kernel oplock mechanism present in the 2.4.x kernels, which you must be
using, since you are using XFS. :-) I'd recommend checking out the latest
CVS of both the Linux kernel with XFS support, available at oss.sgi.com, and
the latest Samba CVS, because many many problems have been fixed in both. If
that's not an option, I have a Samba RPM compiled (version 2.2 from CVS on
5/16/01), with 2.4 oplock support, XFS ACL support, and quota support. If
you do compile your own, make sure the acl-devel RPM package is installed
before you compile Samba; otherwise, you won't be able to have XFS ACL
support. Good luck!
-----------------------------------------
Sean Elble
Writer, Editor, Webmaster
MaximumLinux.org
http://www.maximumlinux.org/
elbles at maximumlinux.org
s_elble at yahoo.com
-----------------------------------------
----- Original Message -----
From: "Libor Vanlk" <lists at conet.cz>
To: <samba at lists.samba.org>
Sent: Wednesday, June 13, 2001 8:11 PM
Subject: What can ACL do?
> Hello,
> I'd like to ask - what can ACLs (on XFS+Samba 2.2) do for me? I was unable
> to find this out. I thought that I can setup rights like "john:rwx,
> jack:r--" but I wasn't (W2k) - I was only able to setup rwx for
> user/group/others :(
>
> Libor Vanek
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <riegel at kodaly.almaden.ibm.com>
Delivered-To: samba at lists.samba.org
Received: from mailhub1.almaden.ibm.com (mailhub1.almaden.ibm.com
[198.4.83.44]) by lists.samba.org (Postfix) with ESMTP id 4B70D50EA
for <samba at lists.samba.org>; Wed, 13 Jun 2001 18:07:24 -0700 (PDT)
Received: from kodaly.almaden.ibm.com (kodaly.almaden.ibm.com
[9.1.10.82]) by mailhub1.almaden.ibm.com (8.8.8/8.8.8) with ESMTP id
SAA21168; Wed, 13 Jun 2001 18:06:50 -0700
Received: (from riegel at localhost) by kodaly.almaden.ibm.com
(8.11.0/8.11.0) id f5E16pd29785; Wed, 13 Jun 2001 18:06:51 -0700
From: Jeff Riegel <riegel at almaden.ibm.com>
Date: Wed, 13 Jun 2001 18:06:51 -0700
To: samba at lists.samba.org
Cc: riegel at almaden.ibm.com
Subject: Win2k Terminal Server: SMB uid's
Message-ID: <20010613180651.E29336 at kodaly.almaden.ibm.com>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.5i
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
I have been experimenting with the Win2k terminal server and have
noticed some strange behavior with SMB: Win2k seems to use the same
UID for different login sessions. I logged in from the terminal server
machine's console and browsed a share via network neighborhood, and it
demanded a password before I could view the contents. Next, I logged into
the terminal server from another machine and did the same thing; this
time, I could view the contents of the share with no password required.
It appears to be using the same UID for both users, so authentication
was only needed the first time.
This is not a Samba problem; the above experiment was using a Windows
SMB server. It seems like very strange behavior to me; different users
logged into the terminal server should have separate authentication for SMB.
Has anyone else observed this behavior? Is this a known problem with the
Win2k terminal server? Is there a configuration parameter for Win2k that
can alter this behavior and give each user a separate SMB UID?
Thanks for any info.
Jeff Riegel
riegel at almaden.ibm.com
Return-Path: <Tom.Williams at diversifiedsoftware.com>
Delivered-To: samba at lists.samba.org
Received: from notesgw1.diversifiedsoftware.com (notesgw1.dssi-jcl.com
[208.195.174.9]) by lists.samba.org (Postfix) with ESMTP id EDE575139
for <samba at lists.samba.org>; Wed, 13 Jun 2001 18:35:52 -0700 (PDT)
Subject: Question about "valid users" setting on shares and NT Domain
security
To: samba at lists.samba.org
X-Mailer: Lotus Notes Release 5.0.6a January 17, 2001
Message-ID: <OF5D5C8227.2B0CAC30-ON88256A6B.0004B09B at diversifiedsoftware
.com>
From: Tom.Williams at diversifiedsoftware.com
Date: Wed, 13 Jun 2001 18:35:51 -0700
X-MIMETrack: Serialize by Router on NOTESGW1/HQ/dssi(Release 5.0.5
|September 22, 2000) at 06/13/2001 06:35:19 PM
MIME-Version: 1.0
Content-type: text/plain; charset=us-ascii
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi! I'm running Samba 2.2.0 on Linux 2.4.4 and I have "security=domain"
configured. My Samba box belongs to my NT domain and user authentication
works beautifully. Now, for ONE particular share, I want only ONE Windows
user to have access to it. I specified user "bob" in the "valid users"
list for the particular share and now when "bob" tries to connect to this
share, I get this error:
C:\>net use z: \\ntlinux\bob
The password is invalid for \\ntlinux\bob.
Type the password for \\ntlinux\bob:
System error 86 has occurred.
The specified network password is not correct.
C:\>
The Windows userid/password info is: bob/bob
This is the info used to logon to the NT domain. There is an account on
the Linux box with the SAME user info "bob/bob" *and* I added a password
("bob") for "bob" to the smbpasswd file.
What am I missing?
Can I NOT use the "valid users" list when "security=domain" is set?
Thanks in advance for your time.
Peace....
Tom
My DVD Collection
Return-Path: <craigrm at inteltec.com.au>
Delivered-To: samba at lists.samba.org
Received: from gateway.inteltec.com.au (mail.ela.com.au [203.59.54.45])
by lists.samba.org (Postfix) with ESMTP id BE8684FE7 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 19:41:09 -0700 (PDT)
Received: from craigrm (craigrm.ela.com.au. [192.168.1.10]) by
gateway.inteltec.com.au (8.9.3/8.9.3) with SMTP id KAA22516 for
<samba at lists.samba.org>; Thu, 14 Jun 2001 10:32:15 +0800 (WST)
(envelope-from craigrm at inteltec.com.au)
Reply-To: <craigrm at inteltec.com.au>
From: "Craig R Marshall" <craigrm at inteltec.com.au>
To: "Samba Mailing Lists (E-mail)" <samba at lists.samba.org>
Subject: Socket Option Problems
Date: Thu, 14 Jun 2001 10:41:25 +0800
Message-ID: <000601c0f47b$81ce2760$0a01a8c0 at electro>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Iam setting the following in my smb.conf file, however iam getting the
following errors
Can any one help
Iam running on FreBSD4.3 with Samba version 2.0.7
/usr/local/etc/smb.config
socket options = TCP_NODELAY IPTOS_LOWDELAY
/var/log/samba/smb.log
[2001/06/14 09:16:58, 0] lib/util_sock.c:set_socket_options(154)
Failed to set socket option SO_KEEPALIVE (Error Bad file descriptor)
[2001/06/14 09:16:58, 0] lib/util_sock.c:set_socket_options(154)
Failed to set socket option TCP_NODELAY (Error Bad file descriptor)
[2001/06/14 09:16:58, 0] lib/util_sock.c:set_socket_options(154)
Failed to set socket option IPTOS_LOWDELAY (Error Bad file descriptor)
Return-Path: <kill-9 at warbeast.com>
Delivered-To: samba at lists.samba.org
Received: from elektra.warbeast.com (unknown [63.106.52.242]) by
lists.samba.org (Postfix) with ESMTP id 29CE54441 for
<samba at lists.samba.org>; Wed, 13 Jun 2001 20:26:44 -0700 (PDT)
Received: from elektra.warbeast.com (IDENT:kill-9 at warbeast.com
[63.106.52.242]) by elektra.warbeast.com (8.9.3/8.9.1) with ESMTP id
XAA00728; Wed, 13 Jun 2001 23:26:06 -0400
Date: Wed, 13 Jun 2001 23:26:05 -0400 (EDT)
From: kill -9 <kill-9 at warbeast.com>
To: "Sean P. Elble" <S_Elble at yahoo.com>
Cc: =?iso-8859-2?Q?Libor_Van=ECk?= <lists at conet.cz>,
samba at lists.samba.org
Subject: Re: What can ACL do?
In-Reply-To: <003b01c0f469$d99d9320$0600a8c0 at gateway>
Message-ID: <Pine.LNX.3.95.1010613232301.698A-100000 at elektra.warbeast.co
m>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I am currently having this same problem with posix acls and redhat 6.2,
but I am not using xfs. Everything is installed and compiled. The rights
are applied correctly and working so far as the linux system is concerned.
Users can only access what they should be able to through samba. But when
I try to use any form of windows server or client to change or read the
rights, only the user group and other rights are shown, no acls. The only
strange thing about my setup is that I am running dual sambas, tng as a
pdc and 2.2 as the file server (which has the acl support). The file
server is a member of the tng domain. Any ideas?
On Wed, 13 Jun 2001, Sean P. Elble wrote:
> Date: Wed, 13 Jun 2001 20:35:00 -0400
> From: "Sean P. Elble" <S_Elble at yahoo.com>
> To: "[iso-8859-2] Libor Vanlk" <lists at conet.cz>, samba at lists.samba.org
> Subject: Re: What can ACL do?
>
> Well, you _can_ have very fine-grained access control with the XFS ACLs with
> Samba 2.2, and it can all be done with Windows 2000. I had a very similar
> problem; if you are using the RPMs graciously provided by the Samba team,
> get rid of them; they don't have ACL support, nor do they have support for
> the kernel oplock mechanism present in the 2.4.x kernels, which you must be
> using, since you are using XFS. :-) I'd recommend checking out the latest
> CVS of both the Linux kernel with XFS support, available at oss.sgi.com, and
> the latest Samba CVS, because many many problems have been fixed in both. If
> that's not an option, I have a Samba RPM compiled (version 2.2 from CVS on
> 5/16/01), with 2.4 oplock support, XFS ACL support, and quota support. If
> you do compile your own, make sure the acl-devel RPM package is installed
> before you compile Samba; otherwise, you won't be able to have XFS ACL
> support. Good luck!
>
> -----------------------------------------
> Sean Elble
> Writer, Editor, Webmaster
> MaximumLinux.org
> http://www.maximumlinux.org/
> elbles at maximumlinux.org
> s_elble at yahoo.com
> -----------------------------------------
>
> ----- Original Message -----
> From: "Libor Vanlk" <lists at conet.cz>
> To: <samba at lists.samba.org>
> Sent: Wednesday, June 13, 2001 8:11 PM
> Subject: What can ACL do?
>
>
> > Hello,
> > I'd like to ask - what can ACLs (on XFS+Samba 2.2) do for me? I was unable
> > to find this out. I thought that I can setup rights like "john:rwx,
> > jack:r--" but I wasn't (W2k) - I was only able to setup rwx for
> > user/group/others :(
> >
> > Libor Vanek
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions: http://lists.samba.org/mailman/listinfo/samba
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
>
----------------------------------------------------------------------------
"First, they ignore you. Then they laugh
at you. Then they fight you. Then you
win." - Mahatma Ghandi
In a world without walls and fences, who needs windows and gates?
Alex West
A&M Communications - Tech Guru
BioControl Technology Inc., MIS Administrator
kill-9 at warbeast.com | kill-9 at ipost.net
WebPage -> www.warbeast.com/~kill-9
Visit Third Eye Digital Productions - http://www.indiana-emall.com/thirdeye
Check out my band and FREE music at *** www.mp3.com/snowpants ***
----------------------------------------------------------------------------
Return-Path: <edv at rauheshaus.de>
Delivered-To: samba at lists.samba.org
Received: from mgate.lantana.net (mgate.lantana.net [194.175.202.6]) by
lists.samba.org (Postfix) with ESMTP id 53F2E447F for
<samba at lists.samba.org>; Wed, 13 Jun 2001 22:24:45 -0700 (PDT)
Received: from mail.rnb.de (unverified) by mgate.lantana.net (Content
Technologies SMTPRS 4.1.5) with SMTP id
<Tc2afca0654223c0786 at mgate.lantana.net> for <samba at lists.samba.org>;
Thu, 14 Jun 2001 07:26:52 +0200
Received: from mailgate1.rnb.de ([194.49.51.139]) by mail.rnb.de (Lotus
SMTP MTA v4.6.3 (733.2 10-16-1998)) with SMTP id 41256A6B.001ED0FB;
Thu, 14 Jun 2001 06:36:35 +0100
Received: from win2000-srv.rauheshaus.de ([192.168.252.106]) by
mailgate1.rnb.de (Lotus SMTP MTA v4.6.2 (693.3 8-11-1998)) with SMTP
id 41256A6B.00222168; Thu, 14 Jun 2001 07:12:47 +0100
Subject: Re: WINBIND
Date: Thu, 14 Jun 2001 07:29:17 +0200
Message-ID: <6A48864DC7CCF14E9500D914514589522436 at WIN2000-SRV.WIN2000.ra
uheshaus.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Thread-Topic: Re: WINBIND
Thread-Index: AcD0kzk2QOIzVfJlTeyK4WCDmG035A==
content-class: urn:content-classes:message
From: "Jan Strohbehn" <edv at rauheshaus.de>
To: "M. Kilroy" <mekilroy at risingedge.com>, <samba at lists.samba.org>
Reply-To: <jan at artstor.de>
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi !!
Try "wbinfo -t", it must say something like "Secret is good". If not you
haven't succesfully joined the domain.
Jan
> -----UrsprC<ngliche Nachricht-----
> Von: samba-admin at lists.samba.org
> [mailto:samba-admin at lists.samba.org]Im
> Auftrag von M. Kilroy
> Gesendet: Mittwoch, 13. Juni 2001 15:18
> An: samba at lists.samba.org; samba-ntdom at lists.samba.org
> Cc: ?????? ?????? ?????????
> Betreff: WINBIND
>
>
> I actually got winbind running, and can see it in my proccess
> list. It
> turns out (for those of you who were also looking for the
> same fix) that I
> wasn't completely wiping out the old version of samba before
> installing the
> new version. I did that, reinstalled the new version and now
> winbind runs.
>
> But I can't log on to the linux box from an NT workstation.
> I did a getent
> group and got all the correct groups back, but when i'm at an
> NT station and
> trying to get to the linux box from Network Neighborhood it
> only admits me
> as guest or nobody. Does anyone know why? I even have
> invalid users =
> nobody in my smb.conf and it still creates a "nobody" direcotry.
>
> THANKS!
>
> ----- Original Message -----
> From: "Simon" <simon at explodingsheep.org>
> To: <samba-ntdom at lists.samba.org>
> Cc: "M. Kilroy" <mekilroy at risingedge.com>
> Sent: Tuesday, June 12, 2001 11:25 AM
> Subject: Re: Fw: LOG FILE
>
>
> M. Kilroy wrote:
>
> >>Hmm. I was just wondering whether it was the 2.2 version
> or the one from
> >>HEAD. 2.0.7 isn't going to work very will with winbind.
> >>
> >
> > See this is what I don't understand... I downloaded HEAD,
> installed it
> with
> > the ./configure (with pam), make && make install, but I
> don't know if it
> > should "take over" at that point or what. Since I already
> had at least
> one
> > other version of samba running, I am not sure if there is
> some uninstall I
> > should do before installing a new version. Maybe I don't
> even have the
> new
> > ver of Samba running, which is why winbind isn't even starting?
> >
> > Any thoughts?
> >
> > THANKS!
> > ~Mary
> >
>
> if you're running linux, do
>
> '/proc/<ps>/exe -V'
>
> where ps is the process number of the smbd as reported by ps
> to get the version number.
>
> Regards, Simon.
>
> --
> Warning!: The contents of this email are a memetic virus.
> You have been infected and should seek medical attention.
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
>
Return-Path: <sgcccdc at citec.qld.gov.au>
Delivered-To: samba at samba.org
Received: from inet03.citec.qld.gov.au (inet03.citec.qld.gov.au
[203.5.10.10]) by lists.samba.org (Postfix) with ESMTP id 8EBBF438A
for <samba at samba.org>; Wed, 13 Jun 2001 23:33:32 -0700 (PDT)
Received: by inet03.citec.qld.gov.au; id QAA10503; Thu, 14 Jun 2001
16:31:58 +1000 (EST)
Received: from guru.citec.qld.gov.au( 147.132.22.88) by
inet03.citec.qld.gov.au via smap (V2.0) id xma010477; Thu, 14 Jun 01
16:31:55 +1000
Received: from localhost (sgcccdc at localhost) by guru.citec.qld.gov.au
(8.9.3/8.9.3) with ESMTP id QAA91353 for <samba at samba.org>; Thu, 14
Jun 2001 16:31:54 +1000 (EST) (envelope-from sgcccdc at citec.qld.gov.au)
X-Authentication-Warning: guru.citec.qld.gov.au: sgcccdc owned process
doing -bs
Date: Thu, 14 Jun 2001 16:31:54 +1000 (EST)
From: Colin Campbell <sgcccdc at citec.qld.gov.au>
To: <samba at samba.org>
Subject: "bug" in Makefile.in
Message-ID: <Pine.BSF.4.33.0106141626070.91334-100000 at guru.citec.qld.gov
.au>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
I am installing v2.2.0. You (try to) use the provided "install-sh" to
create a number of directories at the target "installdirs". Unfortunately,
"install-sh" cannot do this. If I do a diff on the provided "install-sh"
and another version I have on my system, here's what shows up:
diff install-sh /citec/3rd_party/bin/install
4c4,16
< # This comes from X11R5.
---
> # This comes from X11R5 (mit/util/scripts/install.sh).
> #
> # Copyright 1991 by the Massachusetts Institute of Technology
> #
> # Permission to use, copy, modify, distribute, and sell this software and its
> # documentation for any purpose is hereby granted without fee, provided that
> # the above copyright notice appear in all copies and that both that
> # copyright notice and this permission notice appear in supporting
> # documentation, and that the name of M.I.T. not be used in advertising or
> # publicity pertaining to distribution of the software without specific,
> # written prior permission. M.I.T. makes no representations about the
> # suitability of this software for any purpose. It is provided "as is"
> # without express or implied warranty.
11,12c23,24
< # from scratch.
< #
---
> # from scratch. It can only install one file at a time, a restriction
> # shared with many OS's install programs.
Note the last difference. Because of this the target "installdirs" really
needs to change from:
installdirs:
$(SHELL) $(srcdir)/install-sh -d -m $(INSTALLPERMS) \
$(BASEDIR) $(SBINDIR) $(BINDIR) $(LIBDIR) $(VARDIR) $(CODEPAGEDIR)
to something like:
installdirs:
for dir in $(BASEDIR) $(SBINDIR) $(BINDIR) $(LIBDIR) $(VARDIR) $(CODEPAGEDIR); do \
$(SHELL) $(srcdir)/install-sh -d -m $(INSTALLPERMS) $dir; \
done
Hope this helps,
Colin
--
Colin Campbell
Unix Support/Postmaster/Hostmaster
CITEC
+61 7 3006 4710
Return-Path: <rsmart at netaccess.co.nz>
Delivered-To: samba at lists.samba.org
Received: from cirrostratus.netaccess.co.nz (unknown [202.37.101.18]) by
lists.samba.org (Postfix) with ESMTP id A2EF04F02 for
<samba at lists.samba.org>; Thu, 14 Jun 2001 01:45:44 -0700 (PDT)
Received: from study (p62-max2.christchurch.netaccess.net.nz
[210.55.109.190]) by cirrostratus.netaccess.co.nz (8.9.3/8.9.3) with
SMTP id UAA04401 for <samba at lists.samba.org>; Thu, 14 Jun 2001
20:44:19 +1200 (NZST)
Message-Id: <3.0.32.20010614204609.006e9244 at pop3.netaccess.co.nz>
X-Sender: smart at pop3.netaccess.co.nz
X-Mailer: Windows Eudora Pro Version 3.0 (32)
Date: Thu, 14 Jun 2001 20:53:06 +1200
To: samba at lists.samba.org
From: Richard Smart <rsmart at netaccess.co.nz>
Subject: Re: Problem with 2.2
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I had a similar problemm on a Samba 2.0.7 box - finally found that the
Network card had gone faulty - not stopped just a soft failure with really
slow and unreliable response. Worked OK with a single workstation but more
than one and lots of Error messages from Windows 98 clients. ALos there
were no error messages in any logfiles that I could find.
At 11:47 13/06/01 -0500, you wrote:
>A new problem has cropped up with my Samba2.2.0alpha3 installation (i was
>waiting for 2.2.1 to upgrade...) on my RedHat 6.2 server.
>
>I am running Samba as the PDC and fileserver for a network of ~7 Win2k Pro
>machines. Everything has been working perfectly for 3 months, until today.
>
>All of a sudden, it is taking some files an extremely long time to open (up
>to 3 mintues), and these are not particularly large files. When the users
>try to copy the files off of the file server an on to their local hard
>drives, they get 1 of the following errors (the error switches between
>these 2): "Cannot copy <filename>: Error performing inpage operation" or
>"Cannot copy <filename>: The specified network name is no longer
>available", and then the copy dies.
>
>Like I said, we've been running *perfectly* for 3 months now, and I won't
>have a chance to upgrade to the latest CVS until the weekend, so I'm hoping
>there is another answer.
>
>I have checked the logs, and they don't say anything particularly useful
>that I can tell, but I'll email anybody a log who would like to take a look
>(don't want to suck bandwidth). I have restarted Samba, the server, and
>the win2k machines many times, and we're still having the problem.
>
>Here's the Global section of my smb.conf:
>
>[global]
>workgroup = PICOSCRIPT
>server string = Picoscript Samba Server
>security = user
>status = yes
>encrypt passwords = yes
>smb passwd file = /usr/local/samba/private/smbpasswd
>domain logons = yes
>add user script = /usr/bin/adduser -n -g machines -c Machine -d /dev/null
>-s /bin/false %m$logon script = scripts\%U.bat
>domain admin group = @wadmin
>domain admin users = administrator root smccomas
>wins support = yes
>guest account = ftp
>share modes = no
>os level = 65
>min password length = 4
>lock directory = /usr/local/samba/var/locks
>log level = 3
>
>
>Any help is *greatly* appreciated!!!!!!!
>
>Stacey
>
>
>--
>Stacey G. McComas
>Dept Leader, Information Technology
>picoScript
>713-383-8101
>mailto:smccomas at picoscript.com
>--
>To unsubscribe from this list go to the following URL and read the
>instructions: http://lists.samba.org/mailman/listinfo/samba
>
>
Return-Path: <mansoor at simbanet.net>
Delivered-To: samba at lists.samba.org
Received: from mail.simbanet.net (unknown [63.100.198.244]) by
lists.samba.org (Postfix) with ESMTP id 7574F4597 for
<samba at lists.samba.org>; Thu, 14 Jun 2001 02:35:20 -0700 (PDT)
Received: from mail.simbanet.net by mail.simbanet.net (IMA Internet
Exchange 3.11) id 00049630; Thu, 14 Jun 2001 12:41:31 -0700
Received: from sameja ([63.100.198.246]) by mail.simbanet.net with SMTP
(IMA Internet Exchange 3.11) id 0004962F; Thu, 14 Jun 2001 12:41:29
-0700
Message-ID: <006401c0f4b5$3076e4d0$7202a8c0 at sameja>
From: "Mansoor Sameja" <mansoor at simbanet.net>
To: <samba at lists.samba.org>
References: <00005e41-00000000 at mail.simbanet.net>
Subject: Re: Problem with 2.2
Date: Thu, 14 Jun 2001 12:33:31 +0300
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.00.2919.6700
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Can somebody help me, I just want to use Samba to access shared files in my
Windows 2000 server, I have installed samba 2.2, but the whole setup is so
complicated, when I just want to use to share files in my server, somebody
help please.
Mansoor
Return-Path: <yan at seiner.com>
Delivered-To: samba at lists.samba.org
Received: from cardinalengineering.com (bftc5p68.islc.net
[63.71.113.68]) by lists.samba.org (Postfix) with ESMTP id 48AB0426A
for <samba at lists.samba.org>; Thu, 14 Jun 2001 03:03:07 -0700 (PDT)
Received: (from mail at localhost) by cardinalengineering.com (8.9.3/8.9.3)
id GAA25911 for <samba at lists.samba.org>; Thu, 14 Jun 2001 06:02:40
-0400
X-Authentication-Warning: aphrodite.cardinal.lan: mail set sender to
<yan at seiner.com> using -f
X-Authentication-Warning: aphrodite.cardinal.lan: Processed from queue
/var/spool/mqpost-amavis
X-Authentication-Warning: aphrodite.cardinal.lan: Processed by mail with
-C /etc/sendmail.orig.cf
Received: from seiner.com (IDENT:yan at oberon-r.cardinal.lan
[192.168.128.148]) by cardinalengineering.com (8.9.3/8.9.3) with ESMTP
id GAA25728; Thu, 14 Jun 2001 06:02:31 -0400
Message-ID: <3B287DF2.5000802 at seiner.com>
Date: Thu, 14 Jun 2001 05:03:46 -0400
From: Yan Seiner <yan at seiner.com>
User-Agent: Mozilla/5.0 (X11; U; Linux 2.2.19 i686; en-US; rv:0.9.1)
Gecko/20010608
X-Accept-Language: cs, en
MIME-Version: 1.0
To: degraaf at rhsnet.com
Cc: Samba List <samba at lists.samba.org>
Subject: Re: Printer access (bug?)
References: <200106140017.f5E0H5j18631 at datium.datix.com>
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
X-AntiVirus: scanned for viruses by AMaViS 0.2.1 (http://amavis.org/)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I am running 2.0.7 on a RH 6.2 box, and noticed the same thing. I think
there is some subtle error in the way samba parses the printcap file
having to do with multiple names for printers. Like maybe if you use an
underline in your printer name, [printers] fails to correctly handle
printers. Or maybe if youhave more than 2 -3 printer names for a
printer. I've never actually found a pattern in the failures, though.
I just specify each printer separately and remvoe the [printers] entirely.
--Yan
degraaf at rhsnet.com wrote:
>
>
>So, to summarize, my printing problems went away when I redundantly
>specified rules for [lp] that are identical to [printers].
>
Return-Path: <barth at cck.uni-kl.de>
Delivered-To: samba at samba.org
Received: from mail.uni-kl.de (mail.uni-kl.de [131.246.137.52]) by
lists.samba.org (Postfix) with ESMTP id A0BEB48C1 for
<samba at samba.org>; Thu, 14 Jun 2001 04:02:56 -0700 (PDT)
Received: from enterprise.cck.uni-kl.de (enterprise.cck.uni-kl.de
[131.246.239.10]) by mail.uni-kl.de (8.11.0/8.11.0) with ESMTP id
f5EB2Px01684; Thu, 14 Jun 2001 13:02:25 +0200 (MET DST)
Received: from fbk.mv.uni-kl.de (fbk.mv.uni-kl.de [131.246.201.62]) by
enterprise.cck.uni-kl.de (8.9.2/8.9.2) with ESMTP id NAA21657; Thu, 14
Jun 2001 13:02:26 +0200 (MET DST)
Received: from fbk42-7 (fbk42-7.mv.uni-kl.de [131.246.201.77]) by
fbk.mv.uni-kl.de (8.9.1/8.9.1) with ESMTP id NAA11622; Thu, 14 Jun
2001 13:02:28 +0200
From: "Christian Barth" <barth at cck.uni-kl.de>
To: "Murugappan" <murugappan at hgsolutions.com>
Date: Thu, 14 Jun 2001 13:02:27 +0200
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
Subject: Re: linux
Cc: samba at samba.org
Message-ID: <3B28B5E3.29707.15E657 at localhost>
Priority: normal
In-reply-to: <000a01c0f470$9be674a0$956d4040 at hg04>
X-mailer: Pegasus Mail for Win32 (v3.12c)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
> Hi Chris
> I have installed Redhat Linux 7.1.
> I have installed samba 2.0.7 also on my Linux machine.
I asume the Redhat rpm-Version in the following.
> I have an another NT machine which is not in any domain. I wish to make my
> linux box as a PDC and connect my NT machines. I have followed all the
> steps. I am not able to find the domain in my NT mnachine.
You mean, on the NT machine in the network nieboorhood you don't see
the Linux box?
> Firstly I edited the .conf file to suit to my network.
> My samba is installed (by default) in etc/samba directory. There is no bin
> directory at all under etc/samba/bin as many tutorials are pointing this. Is
> the installation wrong.
No, this installation is not wrong. There are to basic possibilities
to install samba:
1. You can compile the source and use all the defaults. This way
every thing of samba is in the directory /usr/local/samba.
2. You can compile samba the way that it is integrated into the
system: All configuration in /etc, the binaries in /bin, /sbin,
/usr/sbin, /usr/bin, the logs in /var/log, the spool-directory in
/var/spool, the man pages in ...
Both possibilities have its pro and cons. The precompiled version
that redhat (rpm's) and all (?) outher distributions use is the 2.
one, adapted to the specific directories used by the distribution.
> Pls can u give me a step by step procedure ( right from .conf file to adding
> users and other stuff )of what has to be done.
you have edit the .conf file, are looking for the bin-directory and
don't see the linux-box in the network nieboorhood?
OK, ist samba running? Do a "ps -auwx | grep mbd" you should see at
least one smbd and one nmbd process. If not, in RedHat is a file
/etc/rc.d/init.d/smb. That's the start/stop skript for samba. Do a
/etc/rc.d/init.d/smb status|stop|start
Once samba is running, try to connect form NT. Do it one by one. I
would start with plaintext passwords. For this to work you must
appliey the following registry-key to NT:
-----
REGEDIT4
;Contributor: Tim Small (tim.small at virgin.net)
;Updated: 20 August 1997
;Status: Current
;
;Subject: Registry file to enable plain text passwords in NT4-
SP3 and later
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Rdr\Parameters]
"EnablePlainTextPassword"=dword:00000001
------
It can be found in the docs directory of the samba distribution. For
DOS and early versions of w95 no regitstry editing is necessary.
Please note that you can connect to your server even if you don't see
it in the network neiboorhood. Just use \\server\share, our the
command "net use" at the NT command prompt.
If this works set up encrypted passwords. Deactivate the registry
key. Once this works you can start to think about setting up a pdc.
Good luck,
please ask not only me but the whole list if you have further
questions.
Christian
>
> P.Murugappan
>
>
> ----- Original Message -----
> From: "Christian Barth" <barth at cck.uni-kl.de>
> To: <samba at samba.org>; "Murugappan" <murugappan at hgsolutions.com>
> Sent: Friday, June 08, 2001 9:18 AM
> Subject: Re: linux
>
>
> > > Hi
> > > My present company has NT workstations and windows 2000 m/cs. We are
> planning
> > > to buy a Linux Red hat professional server. I am damn sure that If I buy
> a
> > > windows 2000 server or a NT server I can make my network running on and
> manage
> > > user accounts easily. Can this Linux server do the same thing as a NT or
> a
> > > 2000 server.
> > > If I use a 2000 server I can easily get a domain tab in each individual
> work
> > > stations and manage network more effeciently,Is this possible by using a
> Linux
> > > server. If possible what are the additional software needed.
> > >
> > > People say samba does this ....Your website says samba is used as a
> print
> > > server , can it support as a additional functionality as in 2000 server.
> > >
> > Im not sure what you mean with your last point. But all the rest (and
> > probaly the last point) can be done by samba. What samba dose not are
> > trustrelation ships. Compare as well:
> > http://www.zdnet.com/eweek/stories/general/0,11011,2712294,00.html
> >
> > I think the decision of your company to shwitch to linux is a good
> > one / the right one. For example, if you like GUI's you get them, but
> > once you are fimilar the the ascii-configuration files, you will love
> > it (learn the basics of vi): Just placing comments to document way
> > something is configured the way it is right there were it is
> > configured :-)
> >
> > Is the decision to shwich to a linux server because your are starting
> > to get a flexible heteruges network? Or does your company simply want
> > to save the money for the NT server? Any way, the company will have
> > to allow you to take your time to learn about it.
> >
> > >
> > > I am not that much knowledgeable in Linux...Suggestions please
> > Do some reading, or some more reading about Linux, Linux/unix
> > adminstration, about samba, .... Start with simple things (not with a
> > production pdc with profiles, policies and printer driver download,
> > but with a test server an sharing files) and do it step by step.
> >
> > Have fun with it,
> >
> > Christian
> >
> >
> > > --
> > > To unsubscribe from this list go to the following URL and read the
> > > instructions: http://lists.samba.org/mailman/listinfo/samba
> > >
> >
> >
> > _______________________________________________________________________
> > In a world without walls and fences, who needs windows and gates? (SUN)
> >
>
>
_______________________________________________________________________
In a world without walls and fences, who needs windows and gates? (SUN)
Return-Path: <barth at cck.uni-kl.de>
Delivered-To: samba at lists.samba.org
Received: from mail.uni-kl.de (mail.uni-kl.de [131.246.137.52]) by
lists.samba.org (Postfix) with ESMTP id BC7244800 for
<samba at lists.samba.org>; Thu, 14 Jun 2001 04:34:12 -0700 (PDT)
Received: from enterprise.cck.uni-kl.de (enterprise.cck.uni-kl.de
[131.246.239.10]) by mail.uni-kl.de (8.11.0/8.11.0) with ESMTP id
f5EBXhx04525; Thu, 14 Jun 2001 13:33:44 +0200 (MET DST)
Received: from fbk.mv.uni-kl.de (fbk.mv.uni-kl.de [131.246.201.62]) by
enterprise.cck.uni-kl.de (8.9.2/8.9.2) with ESMTP id NAA21944; Thu, 14
Jun 2001 13:33:44 +0200 (MET DST)
Received: from fbk42-7 (fbk42-7.mv.uni-kl.de [131.246.201.77]) by
fbk.mv.uni-kl.de (8.9.1/8.9.1) with ESMTP id NAA12225; Thu, 14 Jun
2001 13:33:47 +0200
From: "Christian Barth" <barth at cck.uni-kl.de>
To: SAMBA <samba at lists.samba.org>, Eric Boucher
<eric_boucher60 at yahoo.com>
Date: Thu, 14 Jun 2001 13:33:45 +0200
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
Subject: Re: No printers in the share list with smbclient
Message-ID: <3B28BD39.16737.328E52 at localhost>
Priority: normal
In-reply-to: <20010613172609.49632.qmail at web9404.mail.yahoo.com>
X-mailer: Pegasus Mail for Win32 (v3.12c)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
> Hi,
>
> I am trying to see all my printers onto the network
> via the "smbclient -NL" client. I did the most simple
> "smb.conf" file that I can do to see all my printers
> but I don't see them. Here is my "smb.conf"
> parameters:
>
> [global]
>
> ...
> ...
> printcap name = /etc/printcap
> printing = bsd
> ...
> ...
>
> [printers]
> print ok = yes
> path = /var/spool/samba
> browseable = NO
This should be yes if you want to see the printers. If you just want
to connect it can be no as well
Christian
> load printers = yes
>
> I am using samba on an SGI IRIX 6.5 box. All my share
> files are OK. I can browse it with smbclient and
> "network neighborhood" of windows. When I do a
> "smbclient -NL my_server", in the "TYPE" section, I
> have no printer, only "Disk" and "IPC" type. My
> /etc/printcap file is ok since we use it with the
> command line "lpr -Pprinter_name file_name". Can
> somebody help me?
>
> Thanks
>
> Eric
>
> __________________________________________________
> Do You Yahoo!?
> Get personalized email addresses from Yahoo! Mail - only $35
> a year! http://personal.mail.yahoo.com/
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
>
_______________________________________________________________________
In a world without walls and fences, who needs windows and gates? (SUN)
Return-Path: <abelc at sgo.es>
Delivered-To: samba at samba.org
Received: from smtp04.retemail.es (smtp04.iddeo.es [62.81.186.14]) by
lists.samba.org (Postfix) with ESMTP id 160B3496E for
<samba at samba.org>; Thu, 14 Jun 2001 04:39:30 -0700 (PDT)
Received: from acc ([62.174.64.230]) by smtp04.retemail.es (InterMail
vM.5.01.03.02 201-253-122-118-102-20010403) with SMTP id
<20010614113900.QZWQ23751.smtp04.retemail.es at acc> for
<samba at samba.org>; Thu, 14 Jun 2001 13:39:00 +0200
Message-ID: <002b01c0f4c8$1610a500$1700a8c0 at sgo>
From: "Abel CC" <abelc at sgo.es>
To: <samba at samba.org>
Subject: Problem with Samba ,IRIX and NT 4
Date: Thu, 14 Jun 2001 13:49:35 +0200
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Mailer: Microsoft Outlook Express 5.00.2314.1300
X-Converted-To-Plain-Text: from multipart/alternative by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hello,
I need some help about Samba. I have a machine, a Octane 2 with 6.5.12, and
I've installed samba 2.0.7. I think that samba is properly installed.
It4s more strange because I have the sames users in the Nt Machine and the
IRIX. I've tried the telnet command and connect perfecty.I need additional
installantion on nt to work with samba ? for the moment I've configured the
samba with the smb.conf that attach in this e-amil.For the moment When I
looking for the Irix machine in the Nt client and it4s ok, I see the IRIX
machine, in the section " FIND COMPUTER " of Nt system. But when I click in
the name of Irix machine apper this window :
ENTER NETWORK OR UNKMOWN USERNAME
\\IRIS
Connect as:
password:
Can you show me the steps to do this ?
Thank4s
Dpto. Entertainment SGO Barcelona
e-mail: maya at sgo.es
34 - 93 - 415 96 59 (Phone)
34 - 93 - 292 27 47 (Fax)
Return-Path: <barth at cck.uni-kl.de>
Delivered-To: samba at lists.samba.org
Received: from mail.uni-kl.de (mail.uni-kl.de [131.246.137.52]) by
lists.samba.org (Postfix) with ESMTP id 20C004FE9 for
<samba at lists.samba.org>; Thu, 14 Jun 2001 04:51:57 -0700 (PDT)
Received: from enterprise.cck.uni-kl.de (enterprise.cck.uni-kl.de
[131.246.239.10]) by mail.uni-kl.de (8.11.0/8.11.0) with ESMTP id
f5EBpSx06140; Thu, 14 Jun 2001 13:51:28 +0200 (MET DST)
Received: from fbk.mv.uni-kl.de (fbk.mv.uni-kl.de [131.246.201.62]) by
enterprise.cck.uni-kl.de (8.9.2/8.9.2) with ESMTP id NAA22116; Thu, 14
Jun 2001 13:51:28 +0200 (MET DST)
Received: from fbk42-7 (fbk42-7.mv.uni-kl.de [131.246.201.77]) by
fbk.mv.uni-kl.de (8.9.1/8.9.1) with ESMTP id NAA12626; Thu, 14 Jun
2001 13:51:31 +0200
From: "Christian Barth" <barth at cck.uni-kl.de>
To: samba at lists.samba.org, Jeff Riegel <riegel at almaden.ibm.com>
Date: Thu, 14 Jun 2001 13:51:29 +0200
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
Subject: Re: Win2k Terminal Server: SMB uid's
Cc: riegel at almaden.ibm.com
Message-ID: <3B28C161.30861.42C9A1 at localhost>
Priority: normal
In-reply-to: <20010613180651.E29336 at kodaly.almaden.ibm.com>
X-mailer: Pegasus Mail for Win32 (v3.12c)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
May be apply the follwing registry key, found in the docs-directory
of the samba distributions:
REGEDIT4
;Subject: Registry file to force multiple NT terminal server
users to have their own connections.
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Rdr\Parameters]
"MultipleUsersOnConnection"=dword:00000001
Christian
> Hi,
>
> I have been experimenting with the Win2k terminal server and have
> noticed some strange behavior with SMB: Win2k seems to use the same
> UID for different login sessions. I logged in from the terminal server
> machine's console and browsed a share via network neighborhood, and it
> demanded a password before I could view the contents. Next, I logged into
> the terminal server from another machine and did the same thing; this
> time, I could view the contents of the share with no password required.
> It appears to be using the same UID for both users, so authentication
> was only needed the first time.
>
> This is not a Samba problem; the above experiment was using a Windows
> SMB server. It seems like very strange behavior to me; different users
> logged into the terminal server should have separate authentication for SMB.
> Has anyone else observed this behavior? Is this a known problem with the
> Win2k terminal server? Is there a configuration parameter for Win2k that
> can alter this behavior and give each user a separate SMB UID?
>
> Thanks for any info.
>
> Jeff Riegel
> riegel at almaden.ibm.com
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
>
_______________________________________________________________________
In a world without walls and fences, who needs windows and gates? (SUN)
Return-Path: <mekilroy at risingedge.com>
Delivered-To: samba at lists.samba.org
Received: from mailhost.digitalselect.net (unknown [209.225.164.170]) by
lists.samba.org (Postfix) with ESMTP id A13D75155 for
<samba at lists.samba.org>; Thu, 14 Jun 2001 05:11:48 -0700 (PDT)
Received: from wizzard.rising-edge (risingedge.com [216.181.63.36]) by
mailhost.digitalselect.net (8.11.1/8.11.1) with SMTP id f5ECCwS44804
for <samba at lists.samba.org>; Thu, 14 Jun 2001 08:12:58 -0400 (EDT)
Received: from diamondback (unverified [192.168.0.26]) by
wizzard.rising-edge (EMWAC SMTPRS 0.83) with SMTP id
<B0000082463 at wizzard.rising-edge>; Thu, 14 Jun 2001 08:11:03 -0400
Message-ID: <025401c0f4cb$149632a0$1a00a8c0 at diamondback>
From: "M. Kilroy" <mekilroy at risingedge.com>
To: <jan at artstor.de>, <samba at lists.samba.org>
References: <6A48864DC7CCF14E9500D914514589522436 at WIN2000-SRV.WIN2000.ra
uheshaus.de>
Subject: Re: WINBIND
Date: Thu, 14 Jun 2001 08:11:02 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4133.2400
X-Antirelay: Good relay from local net2 192.168.0.0/24
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Thanks Jan!
I tried this and got "could not check secret", but I also got a message that
said I had successfully joined the domain when I joined earlier. I can also
see all my users/groups with getent group and wbinfo -u.
Does anyone know what "could not check secret" means?
THANKS!
~Mary
----- Original Message -----
From: "Jan Strohbehn" <edv at rauheshaus.de>
To: "M. Kilroy" <mekilroy at risingedge.com>; <samba at lists.samba.org>
Sent: Thursday, June 14, 2001 1:29 AM
Subject: Re: WINBIND
Hi !!
Try "wbinfo -t", it must say something like "Secret is good". If not you
haven't succesfully joined the domain.
Jan
> -----UrsprC<ngliche Nachricht-----
> Von: samba-admin at lists.samba.org
> [mailto:samba-admin at lists.samba.org]Im
> Auftrag von M. Kilroy
> Gesendet: Mittwoch, 13. Juni 2001 15:18
> An: samba at lists.samba.org; samba-ntdom at lists.samba.org
> Cc: ?????? ?????? ?????????
> Betreff: WINBIND
>
>
> I actually got winbind running, and can see it in my proccess
> list. It
> turns out (for those of you who were also looking for the
> same fix) that I
> wasn't completely wiping out the old version of samba before
> installing the
> new version. I did that, reinstalled the new version and now
> winbind runs.
>
> But I can't log on to the linux box from an NT workstation.
> I did a getent
> group and got all the correct groups back, but when i'm at an
> NT station and
> trying to get to the linux box from Network Neighborhood it
> only admits me
> as guest or nobody. Does anyone know why? I even have
> invalid users =
> nobody in my smb.conf and it still creates a "nobody" direcotry.
>
> THANKS!
Return-Path: <mekilroy at risingedge.com>
Delivered-To: samba at lists.samba.org
Received: from mailhost.digitalselect.net (unknown [209.225.164.170]) by
lists.samba.org (Postfix) with ESMTP id 36843518D; Thu, 14 Jun 2001
05:13:04 -0700 (PDT)
Received: from wizzard.rising-edge (risingedge.com [216.181.63.36]) by
mailhost.digitalselect.net (8.11.1/8.11.1) with SMTP id f5ECEDS44854;
Thu, 14 Jun 2001 08:14:13 -0400 (EDT)
Received: from diamondback (unverified [192.168.0.26]) by
wizzard.rising-edge (EMWAC SMTPRS 0.83) with SMTP id
<B0000082465 at wizzard.rising-edge>; Thu, 14 Jun 2001 08:12:26 -0400
Message-ID: <026301c0f4cb$461fc700$1a00a8c0 at diamondback>
From: "M. Kilroy" <mekilroy at risingedge.com>
To: "Tim Potter" <tpot at valinux.com>
Cc: <samba at lists.samba.org>, <samba-ntdom at lists.samba.org>
References: <015401c0f435$c9557980$1a00a8c0 at diamondback>
<15143.64122.217076.583413 at frungy.org>
Subject: Re: more newbie questions
Date: Thu, 14 Jun 2001 08:12:25 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4133.2400
X-Antirelay: Good relay from local net2 192.168.0.0/24
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Gotcha, thanks! What version of Samba should I use then? I'm currently
running the latest version of HEAD from CVS.
Thank you!
~Mary
----- Original Message -----
From: "Tim Potter" <tpot at valinux.com>
To: "M. Kilroy" <mekilroy at risingedge.com>
Cc: <samba at lists.samba.org>; <samba-ntdom at lists.samba.org>
Sent: Wednesday, June 13, 2001 7:42 PM
Subject: Re: more newbie questions
M. Kilroy writes:
> The latest winbind man says to do:
>
> samedit -S '*' -W DOMAIN -UAdministrator
> then,
> createuser MACHINE$ -j DOMAIN -L
OK, the manual page is a bit out of date in this respect. HEAD
cannot join a domain using the administrator name and password.
> but when I try to run either I get errors because I do not have
> samedit or createuser on my linux box for some reason. So
> instead I used "smbpasswd -j DOMAIN -r PDC" after creating an
> account for the linux box in the domain on my PDC. Does this
> cause any problems with winbind or authentication??
It should work fine. I think your authentication problems are
due to some incomplete code in pam_winbind.c I haven't finished
merging that part of winbind from the TNG branch yet. )-:
Tim.
Return-Path: <edv at rauheshaus.de>
Delivered-To: samba at lists.samba.org
Received: from mgate.lantana.net (mgate.lantana.net [194.175.202.6]) by
lists.samba.org (Postfix) with ESMTP id 79BF1517B for
<samba at lists.samba.org>; Thu, 14 Jun 2001 05:22:26 -0700 (PDT)
Received: from mail.rnb.de (unverified) by mgate.lantana.net (Content
Technologies SMTPRS 4.1.5) with SMTP id
<Tc2afca065423ba59da at mgate.lantana.net> for <samba at lists.samba.org>;
Thu, 14 Jun 2001 14:24:28 +0200
Received: from mailgate1.rnb.de ([194.49.51.139]) by mail.rnb.de (Lotus
SMTP MTA v4.6.3 (733.2 10-16-1998)) with SMTP id 41256A6B.00450AB7;
Thu, 14 Jun 2001 13:34:07 +0100
Received: from win2000-srv.rauheshaus.de ([192.168.252.106]) by
mailgate1.rnb.de (Lotus SMTP MTA v4.6.2 (693.3 8-11-1998)) with SMTP
id 41256A6B.00485D58; Thu, 14 Jun 2001 14:10:24 +0100
Subject: Re: WINBIND
Date: Thu, 14 Jun 2001 14:26:55 +0200
Message-ID: <6A48864DC7CCF14E9500D91451458952C789 at WIN2000-SRV.WIN2000.ra
uheshaus.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Thread-Topic: Re: WINBIND
Thread-Index: AcD0zUyG0f1rZVy1SmOE9iK3QypoqQ==
content-class: urn:content-classes:message
From: "Jan Strohbehn" <edv at rauheshaus.de>
To: "M. Kilroy" <mekilroy at risingedge.com>, <samba at lists.samba.org>
Reply-To: <jan at artstor.de>
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi !!
As far as I know this means that either winbindd or smbd are note runnig
correctly or that the private/secrets.tdb file couldn't be opened?!
Try to check the winbind log after calling wbinfo -t
Jan
> Thanks Jan!
>
> I tried this and got "could not check secret", but I also got
> a message that
> said I had successfully joined the domain when I joined
> earlier. I can also
> see all my users/groups with getent group and wbinfo -u.
>
> Does anyone know what "could not check secret" means?
>
> THANKS!
> ~Mary
>
> ----- Original Message -----
> From: "Jan Strohbehn" <edv at rauheshaus.de>
> To: "M. Kilroy" <mekilroy at risingedge.com>; <samba at lists.samba.org>
> Sent: Thursday, June 14, 2001 1:29 AM
> Subject: Re: WINBIND
>
>
>
> Hi !!
>
> Try "wbinfo -t", it must say something like "Secret is good".
> If not you
> haven't succesfully joined the domain.
>
> Jan
>
Return-Path: <mekilroy at risingedge.com>
Delivered-To: samba at lists.samba.org
Received: from mailhost.digitalselect.net (unknown [209.225.164.170]) by
lists.samba.org (Postfix) with ESMTP id C75F251AD for
<samba at lists.samba.org>; Thu, 14 Jun 2001 05:31:49 -0700 (PDT)
Received: from wizzard.rising-edge (risingedge.com [216.181.63.36]) by
mailhost.digitalselect.net (8.11.1/8.11.1) with SMTP id f5ECWxS45765
for <samba at lists.samba.org>; Thu, 14 Jun 2001 08:32:59 -0400 (EDT)
Received: from diamondback (unverified [192.168.0.26]) by
wizzard.rising-edge (EMWAC SMTPRS 0.83) with SMTP id
<B0000082473 at wizzard.rising-edge>; Thu, 14 Jun 2001 08:31:11 -0400
Message-ID: <028601c0f4cd$e3edcf20$1a00a8c0 at diamondback>
From: "M. Kilroy" <mekilroy at risingedge.com>
To: <jan at artstor.de>, <samba at lists.samba.org>
References: <6A48864DC7CCF14E9500D91451458952C789 at WIN2000-SRV.WIN2000.ra
uheshaus.de>
Subject: Re: WINBIND
Date: Thu, 14 Jun 2001 08:31:09 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4133.2400
X-Antirelay: Good relay from local net2 192.168.0.0/24
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Thanks Jan,
I tried checking the log, but there's nothing in it. Is it possible that
winbind and/or smbd are not running even if they can get user groups from
the NT PDC and I can see the linux box on the network?
Thanks!
~Mary
----- Original Message -----
From: "Jan Strohbehn" <edv at rauheshaus.de>
To: "M. Kilroy" <mekilroy at risingedge.com>; <samba at lists.samba.org>
Sent: Thursday, June 14, 2001 8:26 AM
Subject: Re: WINBIND
Hi !!
As far as I know this means that either winbindd or smbd are note runnig
correctly or that the private/secrets.tdb file couldn't be opened?!
Try to check the winbind log after calling wbinfo -t
Jan
Return-Path: <rlh at lsil.com>
Delivered-To: samba at samba.org
Received: from mail2.lsil.com (mail2.lsil.com [147.145.40.22]) by
lists.samba.org (Postfix) with ESMTP id 6418B51B7 for
<samba at samba.org>; Thu, 14 Jun 2001 05:37:49 -0700 (PDT)
Received: from mhbs.lsil.com (mhbs [147.145.31.100]) by mail2.lsil.com
(8.9.3+Sun/8.9.1) with ESMTP id FAA06589 for <samba at samba.org>; Thu,
14 Jun 2001 05:36:48 -0700 (PDT)
Received: from lonfs01.lsil.com by mhbs.lsil.com for samba at samba.org;
Thu, 14 Jun 2001 05:36:36 -0700
Received: from lonws24.lsil.com by lonfs01.lsil.com (SMI-8.6/SMI-SVR4)
id NAA04218; Thu, 14 Jun 2001 13:36:34 +0100
Received: by lonws24.lsil.com (8.9.3+Sun/SMI-SVR4) id NAA05813; Thu, 14
Jun 2001 13:36:34 +0100 (BST)
Date: Thu, 14 Jun 2001 13:36:34 +0100 (BST)
From: rlh at lsil.com (Richard Hellier)
Message-Id: <200106141236.NAA05813 at lonws24.lsil.com>
To: samba at samba.org
Subject: Minor typos in 2.2.0 docs
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Would you be interested in a list of typos in the current
doc set for samba 2.2.0? If so, please let me know the best way to
mark them up and submit them.
Cheers,
Richard.
Return-Path: <edv at rauheshaus.de>
Delivered-To: samba at lists.samba.org
Received: from mgate.lantana.net (mgate.lantana.net [194.175.202.6]) by
lists.samba.org (Postfix) with ESMTP id A2E1251C7 for
<samba at lists.samba.org>; Thu, 14 Jun 2001 06:00:34 -0700 (PDT)
Received: from mail.rnb.de (unverified) by mgate.lantana.net (Content
Technologies SMTPRS 4.1.5) with SMTP id
<Tc2afca065423dd5025 at mgate.lantana.net> for <samba at lists.samba.org>;
Thu, 14 Jun 2001 15:02:39 +0200
Received: from mailgate1.rnb.de ([194.49.51.139]) by mail.rnb.de (Lotus
SMTP MTA v4.6.3 (733.2 10-16-1998)) with SMTP id 41256A6B.004889E5;
Thu, 14 Jun 2001 14:12:19 +0100
Received: from win2000-srv.rauheshaus.de ([192.168.252.106]) by
mailgate1.rnb.de (Lotus SMTP MTA v4.6.2 (693.3 8-11-1998)) with SMTP
id 41256A6B.004BDAFA; Thu, 14 Jun 2001 14:48:32 +0100
Subject: AW: WINBIND
Date: Thu, 14 Jun 2001 15:05:03 +0200
Message-ID: <6A48864DC7CCF14E9500D91451458952C78A at WIN2000-SRV.WIN2000.ra
uheshaus.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
Thread-Topic: WINBIND
Thread-Index: AcD00qAimT1tS1yOQgqXmVVpSNrO+g==
content-class: urn:content-classes:message
From: "Jan Strohbehn" <edv at rauheshaus.de>
To: "M. Kilroy" <mekilroy at risingedge.com>, <samba at lists.samba.org>
Reply-To: <jan at artstor.de>
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I just tried it, and wbinfo really works without winbindd running, but
it's not possible to log in from a windows client.
Are you sure you start winbindd correctly?? Did you look it up in the
process list??
> Thanks Jan,
>
> I tried checking the log, but there's nothing in it. Is it
> possible that
> winbind and/or smbd are not running even if they can get user
> groups from
> the NT PDC and I can see the linux box on the network?
> Thanks!
> ~Mary
Return-Path: <mekilroy at risingedge.com>
Delivered-To: samba at lists.samba.org
Received: from mailhost.digitalselect.net (unknown [209.225.164.170]) by
lists.samba.org (Postfix) with ESMTP id 9A5AC425F for
<samba at lists.samba.org>; Thu, 14 Jun 2001 06:03:45 -0700 (PDT)
Received: from wizzard.rising-edge (risingedge.com [216.181.63.36]) by
mailhost.digitalselect.net (8.11.1/8.11.1) with SMTP id f5ED4tS47661
for <samba at lists.samba.org>; Thu, 14 Jun 2001 09:04:55 -0400 (EDT)
Received: from diamondback (unverified [192.168.0.26]) by
wizzard.rising-edge (EMWAC SMTPRS 0.83) with SMTP id
<B0000082494 at wizzard.rising-edge>; Thu, 14 Jun 2001 09:03:05 -0400
Message-ID: <02af01c0f4d2$599413c0$1a00a8c0 at diamondback>
From: "M. Kilroy" <mekilroy at risingedge.com>
To: <jan at artstor.de>, <samba at lists.samba.org>
References: <6A48864DC7CCF14E9500D91451458952C78A at WIN2000-SRV.WIN2000.ra
uheshaus.de>
Subject: Re: WINBIND
Date: Thu, 14 Jun 2001 09:03:04 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4133.2400
X-Antirelay: Good relay from local net2 192.168.0.0/24
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Well, it's not showing up in my process list. Neither is smbd or nmbd. But
everything is still "running". I just can't log in from my NT machine. How
do they run without showing up in my process list? I started winbind from a
./winbind in my bin directory.
~Mary
----- Original Message -----
From: "Jan Strohbehn" <edv at rauheshaus.de>
To: "M. Kilroy" <mekilroy at risingedge.com>; <samba at lists.samba.org>
Sent: Thursday, June 14, 2001 9:05 AM
Subject: AW: WINBIND
I just tried it, and wbinfo really works without winbindd running, but
it's not possible to log in from a windows client.
Are you sure you start winbindd correctly?? Did you look it up in the
process list??
> Thanks Jan,
>
> I tried checking the log, but there's nothing in it. Is it
> possible that
> winbind and/or smbd are not running even if they can get user
> groups from
> the NT PDC and I can see the linux box on the network?
> Thanks!
> ~Mary
Return-Path: <Errol.Fouquet at mms.gov>
Delivered-To: samba at lists.samba.org
Received: from imsdene.mms.gov (smtp.mms.gov [161.160.14.46]) by
lists.samba.org (Postfix) with ESMTP id CAFD7420E for
<samba at lists.samba.org>; Thu, 14 Jun 2001 06:12:13 -0700 (PDT)
Received: by imsdene.mms.gov with Internet Mail Service (5.5.2653.19) id
<M6R0M78A>; Thu, 14 Jun 2001 07:11:24 -0600
Message-ID: <379313C94B76D2119AB60008C7A402E401E1FD14 at imsnolaa.nola.omm.
mms.gov>
From: "Fouquet, Errol" <Errol.Fouquet at mms.gov>
To: "'degraaf at rhsnet.com'" <degraaf at rhsnet.com>, samba at lists.samba.org
Cc: alexi at wwood.co.uk, srd at erols.com, thyberg at mindspring.com,
phartwick at masteryworks.com
Subject: RE: Printer access (bug?)
Date: Thu, 14 Jun 2001 07:11:09 -0600
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
David,
I'm not sure if this is your problem ... but I noticed you did not mention
the presence of a "PRINT$" share in you smb.conf file.
With Samba 2.2.0 you need both the "printers" share and a "print$" share to
get printing up and running.
My smb.conf file has the following, in addition to the "printers" share:
[PRINT$]
path = /usr/local/samba/printers
guest ok = yes
browseable = yes
read only = yes
write list = lpadmin root
The "path" variable in this case points to the "printers" directory in your
Samba2.2 install, and not your "lpd" spool area. The "write list" is needed
for print driver upload to the Samba server. These are users which are
allowed to push drivers to the Samba box.
Another thing I've figured out is that 2.2.0 no longer needs the all the
"commands" in the "printers" share, all that is required is the addition of
"printing = lprng" in the global section of the smb.conf file.
Hope that this helps
errol
Errol Fouquet - UNIX SysAdmin
Minerals Management Service, DOI
1201 Elmwood Park Blvd.
New Orleans, LA 70123
Phone: (504) 736-3255
Pager: (504) 374-2021
Fax: (504) 736-2464
email: errol.fouquet at mms.gov
http://www.gomr.mms.gov
-----Original Message-----
From: degraaf at rhsnet.com [mailto:degraaf at rhsnet.com]
Sent: Wednesday, June 13, 2001 7:17 PM
To: samba at lists.samba.org
Cc: alexi at wwood.co.uk; srd at erols.com; thyberg at mindspring.com;
phartwick at masteryworks.com
Subject: Printer access (bug?)
After upgrading my several machines to Red Hat 7.1, with
LPRng-3.7.4-22, and samba 2.2.0, I could no longer print from W98.
To explore this I tried smbclient with this result:
$ smbclient \\\\datium\\lp
INFO: Debug class all level = 3 (pid 2242 from pid 2242)
added interface ip=192.168.7.9 bcast=192.168.7.255 nmask=255.255.255.0
added interface ip=192.168.8.9 bcast=192.168.8.255 nmask=255.255.255.0
added interface ip=127.0.0.1 bcast=127.255.255.255 nmask=255.0.0.0
Got a positive name query response from 127.0.0.1 (192.168.7.9 192.168.8.9
)
Password:
Anonymous login successful
Domain=[SAMBA] OS=[Unix] Server=[Samba 2.2.0]
smb: \> print -
ERRDOS - ERRnoaccess (Access denied.) opening remote file stdin-2242
smb: \> q
So samba was trying to write "stdin-2242", but could not.
I had no clue where this file was being written,
or why it failed.
I discovered this curious fact:
\\\\datium\\lp - fails
\\\\datium\\minolta - succeeds
\\\\datium\\canon - succeeds
where lp and minolta are synonyms in /etc/printcap for the local
laser printer and canon is a remote bubblejet on another Linux box.
My smb.conf has these relevant parts:
[global]
load printers = yes
guest account = pcguest
[printers]
comment = All Printers
path = /var/spool/samba
printing = lprng
guest ok = yes
printable = yes
print command = /usr/bin/lpr -P%p -r %s
lpq command = /usr/bin/lpq -P%p
lprm command = /usr/bin/lprm -P%p %j
lppause command = /usr/sbin/lpc hold %p %j
lpresume command = /usr/sbin/lpc release %p %j
queuepause command = /usr/sbin/lpc -P%p stop
queueresume command = /usr/sbin/lpc -P%p start
I had made sure that the specified spool directory was segregated and
had open permissions:
drwxrwxrwt 2 root root 4096 Jun 13 15:56 /var/spool/samba
Alexi Margo (alexi at wwood.co.uk) reported the same problem last Jan
but got no response. Based on his suggestion, I opened the permissions
on /var/spool/lpd, too:
drwxrwxrwt 4 root root 4096 Jun 13 13:45 /var/spool/lpd
and discovered that \\\\datium\\lp no longer failed to open stdin...
but dropped such a file into /var/spool/lpd. However, the job was not
spooled; the file containing the print text just sat there.
I was surprised to see samba treating minolta and lp differently,
because they are the same printer. One is just a different name
for the other. And I was especially surprised that printing to "lp"
would mess with /var/spool/lpd, despite having a specific declaration to
use /var/spool/samba. So on a hunch, I added a specific share definition
for [lp], which is identical to that for [printers] in general, and now
it works!
As Nero Wolfe might say, I am flummoxed.
So, to summarize, my printing problems went away when I redundantly
specified rules for [lp] that are identical to [printers].
All this raises some important questions:
1) Why does samba treat lp differently from minolta when the
[printer] section is supposed to cover _all_ printers?
2) Where did it get the notion to use /var/spool/lpd for any
purpose, whatever?
3) Could the error message
ERRDOS - ERRnoaccess (Access denied.) opening remote file stdin-2242
be modified to tell the full pathname of the file that couldn't be
opened? That would have saved me considerable time.
Let me add this.
When the level of bug complaints become as picayune as this,
it speaks volumes for the quality of the samba product.
Many thanks to all the Samba Team.
--
David A. De Graaf DATIX, Inc. Hendersonville, NC
degraaf at rhsnet.com (828) 696-8646; fax (828) 694-1037
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <alex at www.schnarff.com>
Delivered-To: samba at samba.org
Received: from www.schnarff.com (ec.cdbed1.client.atlantech.net
[209.190.205.236]) by lists.samba.org (Postfix) with SMTP id C2A7D422F
for <samba at samba.org>; Thu, 14 Jun 2001 06:18:43 -0700 (PDT)
Received: (qmail 344 invoked by uid 1000); 14 Jun 2001 13:29:22 -0000
Message-ID: <20010614132922.32200.qmail at www.schnarff.com>
From: "Alex Le Fevre" <alex at schnarff.com>
To: samba at samba.org
Subject: Win98 Naming
Date: Thu, 14 Jun 2001 13:29:22 GMT
Mime-Version: 1.0
Content-Type: text/plain; format=flowed; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I just got v2.0.7 running from OpenBSD's ports collection, and it seems to
be running OK (smbclient -L, for example, produces good output). For some
reason, however, my Win98 boxes are giving me trouble, which I recently
discovered in /var/log/sambalog.
Basically, I'd gone into the "Identification" tag in the Network
Neighborhood properties for those machines and set them to single names
(i.e. "Misty") that I had mirrored on the Samba server. However, when these
systems attempt to log into Samba, they are sending a longer name (i.e.
"Misty Kirk"), which I don't see anywhere in Network Neighborhood.
Where can I find the property for the name the Win98 machines are trying to
send? I think I've got everything else working A-OK. Thanks in advance!
Alex Le Fevre
Return-Path: <abartlet at pcug.org.au>
Delivered-To: samba at samba.org
Received: from dnscache.cbr.au.asiaonline.net
(dnscache.cbr.au.asiaonline.net [210.215.8.100]) by lists.samba.org
(Postfix) with ESMTP id EE933425D for <samba at samba.org>; Thu, 14 Jun
2001 06:32:42 -0700 (PDT)
Received: from piglett.bartlett.house (as2-14.cbr.au.asiaonline.net
[210.215.10.14]) by dnscache.cbr.au.asiaonline.net (8.10.2/8.10.2)
with ESMTP id f5EDVvI22596; Thu, 14 Jun 2001 23:31:58 +1000 (EST)
Received: from yowiee.bartlett.house (IDENT:root at yowiee.bartlett.house
[192.168.1.99]) by piglett.bartlett.house (8.9.3/8.8.7) with ESMTP id
XAA19681; Thu, 14 Jun 2001 23:31:32 +1000
Received: from bartlett.house (IDENT:abartlet at piglett.bartlett.house
[192.168.1.1]) by yowiee.bartlett.house (8.9.3/8.8.7) with ESMTP id
XAA23644; Thu, 14 Jun 2001 23:31:31 +1000
Message-ID: <3B28BCB3.B24A75F2 at bartlett.house>
Date: Thu, 14 Jun 2001 23:31:31 +1000
From: Andrew Bartlett <abartlet at pcug.org.au>
X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.19-6.2.1 i686)
X-Accept-Language: en
MIME-Version: 1.0
To: Richard Hellier <rlh at lsil.com>
Cc: samba at samba.org
Subject: Re: Minor typos in 2.2.0 docs
References: <200106141236.NAA05813 at lonws24.lsil.com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Richard Hellier wrote:
>
> Would you be interested in a list of typos in the current
> doc set for samba 2.2.0? If so, please let me know the best way to
> mark them up and submit them.
The preferred method is to grab the current CVS tree (SAMBA_2_2 branch),
make the changes to the master documents (DocBook) and then run 'cvs -z9
diff -u > patch-file' from the top of the tree to generate the patch.
See http://www.samba.org/samba/cvs.html for more on CVS.
Check the patch is sane, and e-mail it to samba-patches at samba.org (see
samba.org/samba-patches for details), probably CCing
samba-docs at samba.org and/or this list.
(If your not up to all that, then a unified diff (diff -u) of the
affected files will certainly be appreciated).
Andrew Bartlett
--
Andrew Bartlett
abartlet at pcug.org.au
Return-Path: <abartlet at pcug.org.au>
Delivered-To: samba at lists.samba.org
Received: from dnscache.cbr.au.asiaonline.net
(dnscache.cbr.au.asiaonline.net [210.215.8.100]) by lists.samba.org
(Postfix) with ESMTP id 494C34259 for <samba at lists.samba.org>; Thu, 14
Jun 2001 06:43:03 -0700 (PDT)
Received: from piglett.bartlett.house (as2-14.cbr.au.asiaonline.net
[210.215.10.14]) by dnscache.cbr.au.asiaonline.net (8.10.2/8.10.2)
with ESMTP id f5EDg3I23597; Thu, 14 Jun 2001 23:42:03 +1000 (EST)
Received: from yowiee.bartlett.house (IDENT:root at yowiee.bartlett.house
[192.168.1.99]) by piglett.bartlett.house (8.9.3/8.8.7) with ESMTP id
XAA19726; Thu, 14 Jun 2001 23:41:39 +1000
Received: from bartlett.house (IDENT:abartlet at piglett.bartlett.house
[192.168.1.1]) by yowiee.bartlett.house (8.9.3/8.8.7) with ESMTP id
XAA23689; Thu, 14 Jun 2001 23:41:33 +1000
Message-ID: <3B28BF0D.C64D999B at bartlett.house>
Date: Thu, 14 Jun 2001 23:41:33 +1000
From: Andrew Bartlett <abartlet at pcug.org.au>
X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.19-6.2.1 i686)
X-Accept-Language: en
MIME-Version: 1.0
To: Arnold Andrews X-324-4292 <aandrews at eng.okla.seagate.com>
Cc: fmaresca at monssa.com.ar, samba at lists.samba.org
Subject: Re: Passwd change via SWAT
References: <200106131323.IAA19346 at ocosdrc01.eng.okla.seagate.com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Arnold Andrews X-324-4292 wrote:
>
> > --On Tuesday, June 12, 2001 1:31 PM -0300 fmaresca at monssa.com.ar wrote:
> >
> > > I got 2 hosts running samba. One is over a RH6.2 and it
> > > works fine; the second machine is running samba over Debian
> > > Potato and it was installed to replaces the other (old) machine.
> > > The problem is that once samba is all configured and runs ok in
> > > this new amchine, attempts to login in swat as an non-root user
> > > fails.
> > > this never was happens in the old machine, and users in the
> > > network was able to change their passwd using swat. This problem
> > > is relative to samba, swat or debian? Any ideas?
> >
> > It's my understanding that ONLY root can run SWAT. If that *is* true, what
> > was done to Samba on the old machine to change that?
> >
> > - john
> > --
>
> I have successfully logged in to swat as a regular user on my 2.2 server. I
> find that it won't accept the samba password, but rather wants the Unix password
> for authentication. If your Unix passwords are not synched with your samba
> password, then use the Unix password. You will be changing the samba password
> once inside the SWAT.
>
For those interested in whats behind this, SWAT authenticates the
plain-text password via PAM, ie the standard unix DB. If you wan't it
to use the samba password, look into pam_smbpasswd, due for inclusion in
2.2.1 (its in current CVS).
Andrew Bartlett
--
Andrew Bartlett
abartlet at pcug.org.au
Return-Path: <don_mccall at hp.com>
Delivered-To: samba at samba.org
Received: from atlrel2.hp.com (atlrel2.hp.com [156.153.255.202]) by
lists.samba.org (Postfix) with ESMTP id 9859343F9 for
<samba at samba.org>; Thu, 14 Jun 2001 07:10:28 -0700 (PDT)
Received: from xatlrelay1.atl.hp.com (xatlrelay1.atl.hp.com
[15.45.89.190]) by atlrel2.hp.com (Postfix) with ESMTP id E8EC41DB8;
Thu, 14 Jun 2001 10:10:00 -0400 (EDT)
Received: from xatlbh2.atl.hp.com (xatlbh2.atl.hp.com [15.45.89.187]) by
xatlrelay1.atl.hp.com (Postfix) with ESMTP id C71BD1F50C; Thu, 14 Jun
2001 10:09:31 -0400 (EDT)
Received: by xatlbh2.atl.hp.com with Internet Mail Service (5.5.2653.19)
id <MZ6VW1SB>; Thu, 14 Jun 2001 10:09:59 -0400
Message-ID: <079FD72E42C9D311B854009027650E6F04050AC4 at xatl02.atl.hp.com>
From: "MCCALL,DON (HP-USA,ex1)" <don_mccall at hp.com>
To: 'Alex Le Fevre' <alex at schnarff.com>, samba at samba.org
Subject: RE: Win98 Naming
Date: Thu, 14 Jun 2001 10:09:58 -0400
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hello Alex,
The name in the "Identification" tag is the netbios MACHINE name for the
machine, NOT the user name. The MACHINE name would only be used in
attempting a
login (sessionsetup&X) if you were using security=share mode on samba (NOT
recommended
IMHO). If you are in security=user,server, or domain mode on samba, the
name that
will be used to try to logon to samba will be the USERNAME and password that
the user typed in when they first brought Win98 up from the last time they
rebooted.
THAT's the name that you have to mirror on the samba server, or map using
the username map to a valid OpenBSD username in /etc/passwd...
I would suggest for a better understanding of how this all works, and what
would be the
best configuration for you (there are lots of security choices with samba),
take a close
look at Chapter 6 (Users,Security, and Domains" in the online html version
of the book
"Using Samba" (there are a lot of other great books on Samba out there, but
this is the
only one you can get to on the web...):
http://www.samba.org/samba/oreilly/using_samba
(personally I'd buy a hardcopy, if you're gonna be seriously working with
Samba...)
Hope this helps,
Don
-----Original Message-----
From: Alex Le Fevre [mailto:alex at schnarff.com]
Sent: Thursday, June 14, 2001 9:29 AM
To: samba at samba.org
Subject: Win98 Naming
I just got v2.0.7 running from OpenBSD's ports collection, and it seems to
be running OK (smbclient -L, for example, produces good output). For some
reason, however, my Win98 boxes are giving me trouble, which I recently
discovered in /var/log/sambalog.
Basically, I'd gone into the "Identification" tag in the Network
Neighborhood properties for those machines and set them to single names
(i.e. "Misty") that I had mirrored on the Samba server. However, when these
systems attempt to log into Samba, they are sending a longer name (i.e.
"Misty Kirk"), which I don't see anywhere in Network Neighborhood.
Where can I find the property for the name the Win98 machines are trying to
send? I think I've got everything else working A-OK. Thanks in advance!
Alex Le Fevre
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <murugappan at hgsolutions.com>
Delivered-To: samba at samba.org
Received: from host2.ecsecure.com (host2.ecsecure.com [209.239.38.173])
by lists.samba.org (Postfix) with ESMTP id 219B751D9 for
<samba at samba.org>; Thu, 14 Jun 2001 07:12:20 -0700 (PDT)
Received: from hg04 ([64.64.109.149]) by host2.ecsecure.com
(8.10.2/8.10.2) with SMTP id f5EEBXY28070 for <samba at samba.org>; Thu,
14 Jun 2001 10:11:34 -0400
Message-ID: <001801c0f4e3$ede9cd10$956d4040 at hg04>
From: "Murugappan" <murugappan at hgsolutions.com>
To: <samba at samba.org>
Subject: samba help pls
Date: Thu, 14 Jun 2001 10:08:54 -0500
Organization: Hourglass Solutions Inc.
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Mailer: Microsoft Outlook Express 5.50.4522.1200
X-Converted-To-Plain-Text: from multipart/alternative by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hello Everybody
Help me out as I have a doubt in installing samba..
-------------------------------------
I have some NT machines and recently purchased a HP NET server. Just installed
Redhat Linux 7.1. I am planning to make my Linux machine as my PDC,File
server,Print srever etc..so that usernames and passwords are authenticated by
the Linux server.
I have samba 2.0.7 running in etc/samba directory.
I followed the following steps from the website
http://bioserve.latrobe.edu.au/samba/config.html.
----------1) I created some directories.
cd /usr/local/sbin
ln -s /etc/samba/bin/smbpasswd
ln -s /etc/samba/bin/smbclient
ln -s /etc/rc.d/init.d/samba
mkdir /etc/samba/private
mkdir /etc/samba/netlogon
mkdir /etc/samba/netlogon/scripts
Here in second statement I don't have a bin directory at all under my
etc/samba.but blindly I have followed the steps. Is this right.
-------------2) I edited the conf file
[global]
security = user
status = yes
workgroup = MYDOMAIN (*)
wins server = 123.45.67.89 (*)
encrypt passwords = yes
domain logons =yes
domain admin group = @adm
guest account = ftp
share modes=no
os level=65
[homes]
guest ok = no
read only = no
create mask = 0700
directory mask = 0700
oplocks = false
locking = no
[netlogon]
path = /etc/samba/netlogon
writeable = no
guest ok = no
Here is the wins server is my Primary DNS server.
---------------3) Then started samba by saying samba start.
there are 2 processes running smbd and nmbd.
------------4)Next I followed these steps to set up NT clients
touch /etc/samba/private/smbpasswd
chmod go-rwx /etc/samba/private/smbpasswd
at this stage too I am not sure whats going around...
----------------5) At step 5 the document says the following.
Now add an NT machine account, in this case for bc-06, I have a group,
'machines' (you will need to add that yourself or use another group name),
there should be no password, shell or home directory and the name is the NTws
name with a '$' added at the end. :
adduser -g machines -c NTMachine -d /dev/null -s /bin/false -n bc06$
HERE PLS EXPLAIN ME WHAT IS THIS machines WHAT GROUP IS THIS WHAT SHOULD I
GIVE...TOTALLY CONFUSED...
-------------6)Then my next step was
smbpasswd -a -m bc06$
Then the document says logon to NT machine go to network nwighbourhood and If
u press the domain change button and specify your domain name as said in .conf
file. It must appear...ALAS.....ERROR WAS "DOMAIN CONTROLLER FOR THIS DOMAIN
CANNOT BE LOCATED"
I must produce some results to my boss atleast by tomorrow. I need everybodys
help..
Return-Path: <russ at engr.msstate.edu>
Delivered-To: samba at samba.org
Received: from Ra.MsState.Edu (Ra.MsState.Edu [130.18.80.10]) by
lists.samba.org (Postfix) with ESMTP id 57116421B for
<samba at samba.org>; Thu, 14 Jun 2001 07:49:34 -0700 (PDT)
Received: from trash (ws192-197.carpenter.msstate.edu [130.18.197.192]);
by Ra.MsState.Edu (8.10.2/8.10.2/ra_1.18) with SMTP; id f5EEmoa06213
for <samba at samba.org>; Thu, 14 Jun 2001 09:48:55 -0500 (CDT)
Message-ID: <001201c0f496$161bdb50$c0c51282 at trash>
From: "Russ Ward" <russ at engr.msstate.edu>
To: <samba at samba.org>
Date: Thu, 14 Jun 2001 04:51:36 -0100
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
X-Mailer: Microsoft Outlook Express 5.50.4133.2400
X-Converted-To-Plain-Text: from multipart/alternative by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Subject: (no subject)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Does anyone know of a port of smbclient to windows?
Thanks
Russ
Return-Path: <jfeise at ics.uci.edu>
Delivered-To: samba at samba.org
Received: from gremlin.ics.uci.edu (gremlin.ics.uci.edu [128.195.1.70])
by lists.samba.org (Postfix) with SMTP id 36754444D for
<samba at samba.org>; Thu, 14 Jun 2001 07:59:28 -0700 (PDT)
Received: from ics.uci.edu ( pv182069.reshsg.uci.edu [128.195.182.69] )
by gremlin-relay.ics.uci.edu id aa07796 for <samba at samba.org>; 14 Jun
2001 07:59 PDT
Message-ID: <3B28D148.D86F1FE at ics.uci.edu>
Date: Thu, 14 Jun 2001 07:59:20 -0700
From: Joachim Feise <jfeise at ics.uci.edu>
Reply-To: jfeise at ics.uci.edu
Organization: University of California, Irvine
X-Mailer: Mozilla 4.77 [en] (WinNT; U)
X-Accept-Language: en-US,de-DE
MIME-Version: 1.0
To: samba at samba.org
Subject: Re: (no subject)
References: <001201c0f496$161bdb50$c0c51282 at trash>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Russ Ward wrote:
>
> Does anyone know of a port of smbclient to windows?
What for?
SMB is native to Windows, so if you want to copy files, you can
just use Explorer or a command prompt, or write a batch file.
-Joe
Return-Path: <gork at blurbco.com>
Delivered-To: samba at lists.samba.org
Received: from blurbco.com (mail.energynet.com [207.18.68.225]) by
lists.samba.org (Postfix) with ESMTP id 72FC94F16 for
<samba at lists.samba.org>; Thu, 14 Jun 2001 08:24:35 -0700 (PDT)
Received: from localhost (gork at localhost) by blurbco.com (8.11.1/8.11.1)
with ESMTP id f5EFZBB08316 for <samba at lists.samba.org>; Thu, 14 Jun
2001 10:35:11 -0500
X-Authentication-Warning: blurbco.com: gork owned process doing -bs
Date: Thu, 14 Jun 2001 10:35:11 -0500 (CDT)
From: John Laur <gork at blurbco.com>
To: samba at lists.samba.org
Subject: Misc. issues with CUPS+2.2.0
Message-ID: <Pine.LNX.4.10.10106141016221.7326-100000 at blurbco.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Greetings,
I am using Samba 2.2.0 (from samba-2.2.0.final-2.deb Debian packages) with
mostly Win2K clients. Samba is set up as the PDC and I have print
spooling, etc. set up through CUPS. I understand that switching to lpr or
lprng may fix these caveats; however, I thought I'd check and see if there
was a solution that would continue to allow me to use the (oh so
absolutely beautiful) CUPS system.
1) Viewing print jobs in the windows spool show that the owner of all jobs
is "root" although the smbprint.XXX files that samba is creating in the
spool directory all have the correct usernames. This is sort of
inconvenient as people set up as print managers can't see who is printing
jobs and thus can't easily rearrange them (although moving documents
around in the queue works great I believe)
2) I cannot set up another printer share using a custom print command
(e.g. to use the samba server to send faxes or the like) -- it tries to
spool through CUPS even if I set printing=lpr on the printer share. The
custom command never gets executed. I currently have written a kludgy
filter for CUPS for the virtual printer that sort of handles this, but due
to the nature of the whole thing, I can't get at the SMB username or any
of the other fun variables that I could use in the custom print command.
3) when samba first loads in the init scripts, cups is still starting up
and samba cannot immediately enumerate the printer list; however instead
of the printers appearing after a short time -- they never appear at all
and it takes a complete restart of smbd to fix this. Is there something
easy I'm missing here or do i just need to have the cups init script sleep
for 15 seconds after it kicks off to give it time to completely start up
before samba can start?
Thanks in advance to all who can offer any help! I have some more
questions to tackle once I get these figured out, but they don't pertain
to CUPS so I can just wait on those I guess :)
Sincerely,
John Laur
Return-Path: <akuepker at desc.org>
Delivered-To: samba at lists.samba.org
Received: from mail.desc.org (splash195.drizzle.com [216.162.197.195])
by lists.samba.org (Postfix) with ESMTP id BB7EC4211 for
<samba at lists.samba.org>; Thu, 14 Jun 2001 08:52:54 -0700 (PDT)
Received: from desc.org (compspt.desc.org [192.168.6.160]) by
mail.desc.org (8.9.3/8.9.3) with ESMTP id IAA24535 for
<samba at lists.samba.org>; Thu, 14 Jun 2001 08:49:32 -0700
Message-ID: <3B28DD02.AFB64AF5 at desc.org>
Date: Thu, 14 Jun 2001 08:49:22 -0700
From: Adrian Kuepker <akuepker at desc.org>
X-Mailer: Mozilla 4.76 [en] (Win98; U)
X-Accept-Language: en
MIME-Version: 1.0
To: samba at lists.samba.org
Subject: Server confusion from within 'Find Computer'
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I'm running into a somewhat strange problem. From the subnet that the
master Samba server is on, all the Samba servers are visible and can be
connected to via their proper names. When on one of the remote subnets,
when attempting to access the main Admin server, the user is instead
sent to the remote server. Authorized users can connect to the Admin
server just fine if they use Start Menu -- Find Computer -- IP#.
Nothing strange about the workstations, all are Win95 and Win98 with the
WINS server set to the IP of the main Admin server.
Disclaimer: My manager set these up, no need to critique, criticize for
redundancy or other such noise. I'm just trying to fix the mess.
Honestly, I'd like to hear all of the suggestions for fixing the
problems. Some of the fixes I've suggested have been vetoed for
political reasons, but I'd like to hear the forum's viewpoint.
AK
Main Samba Server:
[global]
workgroup = DESC-ADMIN
netbios name = ADMIN
netbios aliases = MAIL
server string = DESC 507/511/Shelter Samba Server
encrypt passwords = Yes
max log size = 50
os level = 65
preferred master = Yes
domain master = Yes
dns proxy = No
wins support = Yes
# wins server = 192.168.2.1
# wins proxy = Yes
# name resolve order = lmhosts wins hosts
remote browse sync = 192.168.2.1
username map = /etc/smbusers
unix password sync = true
passwd program = "/usr/bin/passwd %u"
passwd chat debug = true
passwd chat = "*ew UNIX password: " %n\n "*etype new UNIX password:
"%n\n "*updated succesfully"
hosts allow = 192.168.
Remote Server:
[global]
workgroup = DESC-UNION
netbios name = UNION
server string = DESC Union Hotel Samba Server
encrypt passwords = Yes
log file = /var/log/samba/log.%m
max log size = 50
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
os level = 66
preferred master = Yes
domain master = Yes
dns proxy = Yes
# wins support = Yes
wins proxy = yes
wins server = 192.168.1.1
username map = /etc/smbusers
unix password sync = Yes
passwd program = /usr/bin/passwd %u
interfaces = 192.168.2.1/255.255.255.0 192.168.15.2/255.255.0.0 \
127.0.0.1/255.255.255.255 192.168.6.1/255.255.255.0
bind interfaces only = yes
remote announce = 192.168.1.255/DESC-ADMIN 192.168.1.255/DESC-UNION
remote browse sync = 192.168.1.1
hosts allow = 192.168. 127.0.0.1
Return-Path: <dperez at unimayab.edu.mx>
Delivered-To: samba at samba.org
Received: from labna.unimayab.edu.mx (labna.unimayab.edu.mx
[148.230.236.2]) by lists.samba.org (Postfix) with ESMTP id 4988B44AF
for <samba at samba.org>; Thu, 14 Jun 2001 09:56:14 -0700 (PDT)
Received: by customer8-133.telmex.net.mx with Internet Mail Service
(5.5.2653.19) id <MX4NAG47>; Thu, 14 Jun 2001 10:06:29 -0500
Message-ID: <5244D6CCDD76D411B090006008AAD7420D9C1D at customer8-133.telmex
.net.mx>
From: "A. David Perez Marfil" <dperez at unimayab.edu.mx>
To: samba at samba.org
Subject: Password Sync FreeBSD + Samba + WSNT4.0
Date: Thu, 14 Jun 2001 10:06:20 -0500
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
some one has made work password sync for this ..
FreeBSD 4.3 + samba 2.0.8 as PDC
WinNT WS 4.0 as a Client
i try this password chat:
passwd chat = *old*password* %o\n *new*password* %n\n *Retype*new*password*
%n\n *done*
but don4t work
Best Regards
David Perez
Return-Path: <AdamG at hrrm.ucdavis.edu>
Delivered-To: samba at lists.samba.org
Received: from franc.ucdavis.edu (franc.ucdavis.edu [169.237.105.2]) by
lists.samba.org (Postfix) with ESMTP id 0FF1E524C for
<samba at lists.samba.org>; Thu, 14 Jun 2001 10:44:52 -0700 (PDT)
Received: from athena.ucdavis.edu (hrrm.ucdavis.edu [169.237.48.1]) by
franc.ucdavis.edu (8.11.4/8.11.0/IT4.4.9) with ESMTP id f5EHiOq06814
for <samba at lists.samba.org>; Thu, 14 Jun 2001 10:44:24 -0700 (PDT)
Received: by hrrm.ucdavis.edu with Internet Mail Service (5.5.2653.19)
id <K92S260J>; Thu, 14 Jun 2001 10:44:27 -0700
Message-ID: <683DA182E53ED411A4310060B0675A902AA070 at hrrm.ucdavis.edu>
From: Adam Getchell <AdamG at hrrm.ucdavis.edu>
To: "'samba at lists.samba.org'" <samba at lists.samba.org>
Subject: Joining NT4 domain with Samba 2.2.0
Date: Thu, 14 Jun 2001 10:44:14 -0700
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="us-ascii"
X-Converted-To-Plain-Text: from multipart/alternative by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi all,
I'm looking to set up a small file server (using an old machine) on an NT4
network using Redhat 7.1 and samba 2.2.0.
Reading through the FAQ, I've done the following:
Created an account in Server manager for the samba box
smbpasswd -j MYDOM -r MYDOMPDC
Added to my smb.conf file:
security = domain
workgroup = MYDOM
encrypt passwords = yes
password server = MYDOMPDC
Created the smbpasswd file:
cat /etc/passwd | mksmbpasswd.sh > /etc/samba/smbpasswd
When running the diagnosis test, the following tests work:
1: testparm
2: ping BIGSERVER and ping ACLIENT
3: smbclient -L BIGSERVER lists the shares
4: nmblookup -B BIGSERVER __SAMBA__ returns BIGSERVER's IP
5: nmblookup -B ACLIENT '*' returns ACLIENT's IP
6: nmblookup -d 2 '*' returns a long list of NT boxes on the domain
7: smbclient //BIGSERVER/Public works for the one account that was synched
using mksmbpasswd.sh. It also says "added interface ip=myip bcast=mynet
nmask=mynet" where myip, mynet are the correct values.
Test 8: netview \\BIGSERVER on a Win2K client fails with "System error 53:
The network path was not found." On the NT4 PDC, the error is:
"System error 1234 has occurred. No service is operating at the destination
network endpoint on the remote system."
Logcheck generates the following info:
Security Violations
=-=-=-=-=-=-=-=-=-=
Jun 14 10:08:47 SMBOX smb: smbd shutdown succeeded
Jun 14 10:08:47 SMBOX smb: nmbd shutdown succeeded
Unusual System Events
=-=-=-=-=-=-=-=-=-=-=
Jun 14 10:08:47 SMBOX smb: smbd shutdown succeeded
Jun 14 10:08:47 SMBOX nmbd[14285]: [2001/06/14 10:08:47, 0]
nmbd/nmbd.c:sig_term(65)
Jun 14 10:08:47 SMBOX nmbd[14285]: Got SIGTERM: going down...
Jun 14 10:08:47 SMBOX smb: nmbd shutdown succeeded
Jun 14 10:08:48 SMBOX smb: smbd startup succeeded
Jun 14 10:08:48 SMBOX smb: nmbd startup succeeded
Jun 14 10:08:50 SMBOX nmbd[14358]: [2001/06/14 10:08:50, 0]
nmbd/nmbd_logonnames.c:add_logon_names(158)
Jun 14 10:08:50 SMBOX nmbd[14358]: add_domain_logon_names:
Jun 14 10:08:50 SMBOX nmbd[14358]: Attempting to become logon server for
workgroup MYDOM on subnet xxx.yyy.zzz.www
Jun 14 10:08:50 SMBOX nmbd[14358]: [2001/06/14 10:08:50, 0]
nmbd/nmbd_logonnames.c:add_logon_names(158)
Jun 14 10:08:50 SMBOX nmbd[14358]: add_domain_logon_names:
Jun 14 10:08:50 SMBOX nmbd[14358]: Attempting to become logon server for
workgroup MYDOM on subnet UNICAST_SUBNET
Jun 14 10:08:55 SMBOX nmbd[14358]: [2001/06/14 10:08:55, 0]
nmbd/nmbd_logonnames.c:become_logon_server_success(116)
Jun 14 10:08:55 SMBOX nmbd[14358]: become_logon_server_success: Samba is
now a logon server for workgroup MYDOM on subnet xxx.yyy.zzz.www
The interesting thing about this is subnet xxx.yyy.zzz.www is the IP address
for SMBOX, rather than the xxx.yyy.zzz/24 network name.
Obviously, I'm missing something. I've read WinNT.txt and encryption.txt and
searched through the lists archives. Any pointers on this?
Thanks,
Here's my smb.conf file, suitably edited:
[global]
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = MYDOM
netbios name = SMBOX
domain logons = yes
# server string is the equivalent of the NT Description field
server string = Samba Server
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
; printcap name = /etc/printcap
; load printers = yes
# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
; printing = bsd
# Uncomment this if you want a guest account, you must add this to
/etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Security mode. Most people will want user level security. See
# security_level.txt for details.
security = domain
# Use password server option only with security = server
password server = MYDOMPDC
# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8
# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd
# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
; unix password sync = Yes
; passwd program = /usr/bin/passwd %u
; passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n
*passwd:*all*authentication*tokens*updated*successfully*
# Unix users can map to different SMB User names
; username map = /etc/samba/smbusers
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m
# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
; bind interfaces only = yes
# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44
remote announce = xxx.yyy.zzz.255 lll.kkk.mmm.255
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
; domain controller = MYDOMPDC
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config,
/etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are
NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS
Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT
both
wins server = xxx.yyy.zzz.www
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
dns proxy = yes
# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no
#============================ Share Definitions
==============================
# A publicly accessible directory, but read only, except for people in
# the "staff" group
[public]
comment = Public Stuff
path = /home/public
browseable = yes
create mask = 0664
directory mask = 0775
; public = yes
; read only = yes
; write list = @staff
[data]
comment = Data
path = /home/samba/data
read only = no
create mask = 0660
directory mask = 0770
guest ok = yes
browseable = yes
***************************
* Adam Getchell
AdamG at hrrm.ucdavis.edu
* System Architect/Programmer (530) 752-1584
* Human Resources Information Systems http://www.hr.ucdavis.edu/
***************************
"Invincibility is in oneself, vulnerability in the opponent." -- Sun Tzu
Return-Path: <torriem at cs.byu.edu>
Delivered-To: samba at lists.samba.org
Received: from mail.cs.byu.edu (mail.cs.byu.edu [128.187.2.20]) by
lists.samba.org (Postfix) with ESMTP id 1C54B45E3 for
<samba at lists.samba.org>; Thu, 14 Jun 2001 11:08:19 -0700 (PDT)
Received: from verdi.cs.byu.edu (IDENT:torriem at verdi.cs.byu.edu
[128.187.101.86]) by mail.cs.byu.edu (8.11.0/8.11.0) with ESMTP id
f5EI7pP03968 for <samba at lists.samba.org>; Thu, 14 Jun 2001 12:07:51
-0600
Date: Thu, 14 Jun 2001 12:07:50 -0600 (MDT)
From: Michael L Torrie <torriem at cs.byu.edu>
To: <samba at lists.samba.org>
Subject: Using disk cloning software and samba pdc
Message-ID: <Pine.LNX.4.33.0106141202590.26871-100000 at verdi.cs.byu.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I'm not sure how to deal with this in a normal win2k network, but we
usually clone all of our machines off of an "image" computer. Does anyone
have any procedures for making image work with a samba pdc network? It
would be a total pain to manually add 100 machines to a pdc (I am using a
samba-tng/samba dual-head server, so this applies to samba-tng too).
The solution I've come up with is to use the image's machine account to
create all the machine accounts (they will all have the same password,
though). This would basically create a machine account for each computer
in an already joined state. Security aside, is this a workable solution?
What is a better one?
Too bad win2k doesn't have better commandline tools or I could write a
startup script to take care of this kind of thing. Does anyone know how
to set the machine name in windows 2000 without going to the control panel
or right-clicking on "My computer"? Basically I also need to have each
machine get it's host name from DCHP. (This is opposite of MS's dynamic
DNS updates).
thanks,
Michael
Return-Path: <npralle at creativesolutionsunlimited.com>
Delivered-To: samba at lists.samba.org
Received: from smtp08.phx.gblx.net (smtp08.phx.gblx.net [64.211.219.57])
by lists.samba.org (Postfix) with ESMTP id BA33D527C for
<samba at lists.samba.org>; Thu, 14 Jun 2001 11:11:50 -0700 (PDT)
Received: (from daemon at localhost) by smtp08.phx.gblx.net (8.9.3/8.9.3)
id LAA278210 for <samba at lists.samba.org>; Thu, 14 Jun 2001 11:11:21
-0700
Received: from 208-50-106-187.nas1.SHF.gblx.net(208.50.106.187),
claiming to be "aristotle.creativesolutionsunlimited.com" via SMTP by
smtp08.phx.gblx.net, id smtpdShR3Ea; Thu Jun 14 11:11:09 2001
Message-Id: <5.0.2.1.2.20010614130528.00aea150 at creativesolutionsunlimite
d.com>
X-Sender: npralle at creativesolutionsunlimited.com
X-Mailer: QUALCOMM Windows Eudora Version 5.0.2
Date: Thu, 14 Jun 2001 13:11:54 -0500
To: samba at lists.samba.org
From: "Nathan E. Pralle" <npralle at creativesolutionsunlimited.com>
Subject: Zip Drive + Samba + Winblows
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
All,
Problem: I have a ||port zip drive mounted on our Linux box, shared by
Samba to the Winblows network. I could easily use the "preexec/postexec"
to mount it, then eject the disk, but the problem is that linux won't eject
the disk (unmount it) while Samba is running. I first have to kill Samba,
then eject.
Well, of course, how do you kill Samba then expect it to run the
postexec! You can't, of course, so I'm up a bit of a creek.
Anyone have a good solution to this one? I have an office full of ID10T
Winblows users that couldn't tell a shell prompt from their earlobe.
Thanks,
Nathan
Return-Path: <bferrell at microdisplay.com>
Delivered-To: samba at lists.samba.org
Received: from sartre.microdisplay.com (sartre.microdisplay.com
[207.104.26.10]) by lists.samba.org (Postfix) with ESMTP id 24E744255
for <samba at lists.samba.org>; Thu, 14 Jun 2001 11:38:00 -0700 (PDT)
Received: from romulus.microdisplay.com
(IDENT:root at romulus.microdisplay.com [207.214.198.163]) by
sartre.microdisplay.com (8.11.1/8.8.7) with ESMTP id f5EIaVt16054;
Thu, 14 Jun 2001 11:36:31 -0700
Received: from microdisplay.com (IDENT:bferrell at furby.microdisplay.com
[207.214.198.190]) by romulus.microdisplay.com (8.9.3/8.8.7) with
ESMTP id LAA28024; Thu, 14 Jun 2001 11:36:31 -0700
Message-ID: <3B29042F.B796E87 at microdisplay.com>
Date: Thu, 14 Jun 2001 11:36:31 -0700
From: Bruce Ferrell <bferrell at microdisplay.com>
X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.19 i586)
X-Accept-Language: en
MIME-Version: 1.0
To: "Nathan E. Pralle" <npralle at creativesolutionsunlimited.com>
Cc: samba at lists.samba.org
Subject: Re: Zip Drive + Samba + Winblows
References: <5.0.2.1.2.20010614130528.00aea150 at creativesolutionsunlimite
d.com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
How about using the automounter?
"Nathan E. Pralle" wrote:
> All,
>
> Problem: I have a ||port zip drive mounted on our Linux box, shared by
> Samba to the Winblows network. I could easily use the "preexec/postexec"
> to mount it, then eject the disk, but the problem is that linux won't eject
> the disk (unmount it) while Samba is running. I first have to kill Samba,
> then eject.
>
> Well, of course, how do you kill Samba then expect it to run the
> postexec! You can't, of course, so I'm up a bit of a creek.
>
> Anyone have a good solution to this one? I have an office full of ID10T
> Winblows users that couldn't tell a shell prompt from their earlobe.
>
> Thanks,
>
> Nathan
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <thomas.rice at rsdmail.k12.ar.us>
Delivered-To: samba at lists.samba.org
Received: from rsdmail.k12.ar.us (rsdmail.k12.ar.us [170.211.146.216])
by lists.samba.org (Postfix) with ESMTP id 950575287 for
<samba at lists.samba.org>; Thu, 14 Jun 2001 11:42:39 -0700 (PDT)
Date: Thu, 14 Jun 2001 13:39:19 -0500
Message-Id: <200106141339.AA70385928 at rsdmail.k12.ar.us>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
From: "Thomas Rice" <thomas.rice at rsdmail.k12.ar.us>
Reply-To: <thomas.rice at rsdmail.k12.ar.us>
To: <samba at lists.samba.org>
Subject: SuSe 7.1 and Samba
X-Mailer: <IMail v6.05>
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
--- Newbie Warning ---
Where do I find a version of Samba that will run on SuSE 7.1? I can only find Samba for SuSE 6.1 on ftp.samba.org
Thanks for the help!
--- Newbie signing off ---
________________________________________________________________
Sent via the WebMail system at rsdmail.k12.ar.us
Return-Path: <cory at texscan-msi.com>
Delivered-To: samba at samba.org
Received: from gawthik.texscan.com (node-4024b509.powerinter.net
[64.36.181.9]) by lists.samba.org (Postfix) with ESMTP id 1C9DA4233
for <samba at samba.org>; Thu, 14 Jun 2001 11:58:55 -0700 (PDT)
Received: from cory (cory.texscan.com [64.36.181.24]) by
gawthik.texscan.com (8.11.4/8.11.4) with SMTP id f5EItlo26817 for
<samba at samba.org>; Thu, 14 Jun 2001 12:55:52 -0600 (MDT)
Message-ID: <002501c0f503$fa5586f0$18b52440 at texscan>
From: "Cory Kearns" <cory at texscan-msi.com>
To: <samba at samba.org>
Subject: Problems with Windows 98
Date: Thu, 14 Jun 2001 12:58:15 -0600
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4133.2400
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hopefully this is the correct place to come with this problem.
I have Samba 2.2.0 running on FreeBSD 4.3-RELEASE. That all works fine and
dandy, and did when I had the machine on a network with an NT machine
handling the domain. However, when the samba machine accepts domain logons,
Windows 98 machines take approx. 20 minutes to find anything on the network.
NT machines work absolutely fine.
Preferred master and such are set to yes and os level at 65. When I set os
level to 0 and master browser settings to no, it found the machine right off
the bat, but when selecting it to list its shares, that took approx 20
minutes to display.
I hope this is enough information.
Return-Path: <S_Elble at yahoo.com>
Delivered-To: samba at lists.samba.org
Received: from scaup.mail.pas.earthlink.net
(scaup.mail.pas.earthlink.net [207.217.121.49]) by lists.samba.org
(Postfix) with ESMTP id 489C352F5 for <samba at lists.samba.org>; Thu, 14
Jun 2001 12:19:20 -0700 (PDT)
Received: from gateway (dhcp181-19-151-24.nm01-c3.cpe.charter-ne.com
[24.151.19.181]) by scaup.mail.pas.earthlink.net (EL-8_9_3_3/8.9.3)
with SMTP id MAA24087; Thu, 14 Jun 2001 12:18:48 -0700 (PDT)
Message-ID: <007501c0f506$81427900$0600a8c0 at gateway>
Reply-To: "Sean P. Elble" <S_Elble at yahoo.com>
From: "Sean P. Elble" <S_Elble at yahoo.com>
To: "kill -9" <kill-9 at warbeast.com>
Cc: <samba at lists.samba.org>
References: <Pine.LNX.3.95.1010613232301.698A-100000 at elektra.warbeast.co
m>
Subject: Re: What can ACL do?
Date: Thu, 14 Jun 2001 15:16:23 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4522.1200
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Well, I'd have a look at the Samba compilation again; unless Samba 2.2
explicitly stated that ACLs were being enabled during the compile, then
they're not there. Another simple thing that I almost forgot was that you
have to specify that you want ACL support (i.e --with-acl-support). Check to
make sure that there is an acl.h file in your /usr/include/linux directory
structure; this file came with the XFS acl-devel package, though I'm not
sure where it might appear for you. However, you do say the rights are
applied correctly; the way your e-mail was worded, it was hard to tell if
you are speaking of ACL rights, or regular Unix rights; which one is it?
I'll do some research on this, and get back to you. Good luck!
-----------------------------------------
Sean Elble
Writer, Editor, Webmaster
MaximumLinux.org
http://www.maximumlinux.org/
elbles at maximumlinux.org
s_elble at yahoo.com
-----------------------------------------
----- Original Message -----
From: "kill -9" <kill-9 at warbeast.com>
To: "Sean P. Elble" <S_Elble at yahoo.com>
Cc: "Libor Vanlk" <lists at conet.cz>; <samba at lists.samba.org>
Sent: Wednesday, June 13, 2001 11:26 PM
Subject: Re: What can ACL do?
> I am currently having this same problem with posix acls and redhat 6.2,
> but I am not using xfs. Everything is installed and compiled. The rights
> are applied correctly and working so far as the linux system is concerned.
> Users can only access what they should be able to through samba. But when
> I try to use any form of windows server or client to change or read the
> rights, only the user group and other rights are shown, no acls. The only
> strange thing about my setup is that I am running dual sambas, tng as a
> pdc and 2.2 as the file server (which has the acl support). The file
> server is a member of the tng domain. Any ideas?
>
> On Wed, 13 Jun 2001, Sean P. Elble wrote:
>
> > Date: Wed, 13 Jun 2001 20:35:00 -0400
> > From: "Sean P. Elble" <S_Elble at yahoo.com>
> > To: "[iso-8859-2] Libor Vanlk" <lists at conet.cz>, samba at lists.samba.org
> > Subject: Re: What can ACL do?
> >
> > Well, you _can_ have very fine-grained access control with the XFS ACLs
with
> > Samba 2.2, and it can all be done with Windows 2000. I had a very
similar
> > problem; if you are using the RPMs graciously provided by the Samba
team,
> > get rid of them; they don't have ACL support, nor do they have support
for
> > the kernel oplock mechanism present in the 2.4.x kernels, which you must
be
> > using, since you are using XFS. :-) I'd recommend checking out the
latest
> > CVS of both the Linux kernel with XFS support, available at oss.sgi.com,
and
> > the latest Samba CVS, because many many problems have been fixed in
both. If
> > that's not an option, I have a Samba RPM compiled (version 2.2 from CVS
on
> > 5/16/01), with 2.4 oplock support, XFS ACL support, and quota support.
If
> > you do compile your own, make sure the acl-devel RPM package is
installed
> > before you compile Samba; otherwise, you won't be able to have XFS ACL
> > support. Good luck!
> >
> > -----------------------------------------
> > Sean Elble
> > Writer, Editor, Webmaster
> > MaximumLinux.org
> > http://www.maximumlinux.org/
> > elbles at maximumlinux.org
> > s_elble at yahoo.com
> > -----------------------------------------
> >
> > ----- Original Message -----
> > From: "Libor Vanlk" <lists at conet.cz>
> > To: <samba at lists.samba.org>
> > Sent: Wednesday, June 13, 2001 8:11 PM
> > Subject: What can ACL do?
> >
> >
> > > Hello,
> > > I'd like to ask - what can ACLs (on XFS+Samba 2.2) do for me? I was
unable
> > > to find this out. I thought that I can setup rights like "john:rwx,
> > > jack:r--" but I wasn't (W2k) - I was only able to setup rwx for
> > > user/group/others :(
> > >
> > > Libor Vanek
> > > --
> > > To unsubscribe from this list go to the following URL and read the
> > > instructions: http://lists.samba.org/mailman/listinfo/samba
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions: http://lists.samba.org/mailman/listinfo/samba
> >
>
> --------------------------------------------------------------------------
--
> "First, they ignore you. Then they laugh
> at you. Then they fight you. Then you
> win." - Mahatma Ghandi
>
> In a world without walls and fences, who needs windows and gates?
>
> Alex West
> A&M Communications - Tech Guru
> BioControl Technology Inc., MIS Administrator
> kill-9 at warbeast.com | kill-9 at ipost.net
> WebPage -> www.warbeast.com/~kill-9
> Visit Third Eye Digital Productions -
http://www.indiana-emall.com/thirdeye
> Check out my band and FREE music at *** www.mp3.com/snowpants ***
> --------------------------------------------------------------------------
--
Return-Path: <prea at uninsubria.it>
Delivered-To: samba at samba.org
Received: from mull.uninsubria.it (ns.uninsubria.it [193.206.179.2]) by
lists.samba.org (Postfix) with ESMTP id DCB6444E8 for
<samba at samba.org>; Thu, 14 Jun 2001 12:40:50 -0700 (PDT)
Received: from six (six.dipbsf.uninsubria.it [193.206.172.50]) by
mull.uninsubria.it (8.11.4/8.11.2) with ESMTP id f5EJe8304001; Thu, 14
Jun 2001 21:40:08 +0200
From: "Damiano G. Preatoni" <prea at uninsubria.it>
Organization: =?ISO-8859-1?Q?UAGB_-_DBSF_Universit=E0_degli_Studi_dell'I
ns?=
To: "Murugappan" <murugappan at hgsolutions.com>, <samba at samba.org>
Date: Thu, 14 Jun 2001 21:40:06 +0200
MIME-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
Subject: Re: samba help pls
Reply-To: prea at uninsubria.it
Message-ID: <3B292F36.15674.922D24 at localhost>
Priority: normal
In-reply-to: <001801c0f4e3$ede9cd10$956d4040 at hg04>
X-mailer: Pegasus Mail for Win32 (v3.12c)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On 14 Jun 2001, at 10:08, Murugappan wrote:
>
> I have some NT machines and recently purchased a HP NET server. Just installed
> Redhat Linux 7.1. I am planning to make my Linux machine as my PDC,File
> server,Print srever etc..so that usernames and passwords are authenticated by
> the Linux server.
Nice idea!
It's two years I have set up a Compaq ProLiant 1600 dual-PIII as a
workgroup server, using RH 6.2 and samba 2.0.7 (a BIG thank to
David Bannon!!!)
> Here in second statement I don't have a bin directory at all under my
> etc/samba.but blindly I have followed the steps. Is this right.
^^^^^^^^^^^^^
Please, you're on a *nix system.
It's assumed you're aware of what you're doing.
Use the samba 2.0.7 rpm, and everything will be in place.
David's setup is slightly different, but don't worry.
After installing the RPM, the only thing you should need is ti edit
/etc/smb.conf
> status = yes
never seen such a line in smb.conf. Remove it.
> workgroup = MYDOMAIN (*)
here goes your shiny brand new domain name. Mine is UAGB, that
is the acronym of the research unit where I work.
> wins server = 123.45.67.89 (*)
remove this also, here goes the IP address of your WINS server (if
you have any)
> encrypt passwords = yes
> domain logons =yes
> domain admin group = @adm
> guest account = ftp
> share modes=no
> os level=65
So far, so good. These are fine.
> [homes]
> guest ok = no
> read only = no
> create mask = 0700
> directory mask = 0700
> oplocks = false
> locking = no
OK!
> [netlogon]
> path = /etc/samba/netlogon
> writeable = no
> guest ok = no
>
> Here is the wins server is my Primary DNS server.
strange address, you WINS server... IS really 123.45.67.89??? are
you on a VPN?
>
> ---------------3) Then started samba by saying samba start.
> there are 2 processes running smbd and nmbd.
Right.
say ps -aux | grep samba and you should see them
> ------------4)Next I followed these steps to set up NT clients
>
> touch /etc/samba/private/smbpasswd
the RPM installs under /etc/smbpasswd
> chmod go-rwx /etc/samba/private/smbpasswd
No! chmod 0600 and chown root.root
> at this stage too I am not sure whats going around...
:) Hold on!
>
> ----------------5) At step 5 the document says the following.
>
> Now add an NT machine account,
Here 's the trick:
AS ROOT:
you have to create once and forever a group called "workstations"
(or anything you like, but calling the group which contains all the
workstations "workstations" is nice)
groupadd workstations
then create the unix machine accounts: assume I have machine1
and machine2
adduser -g workstations -c 'Workstation number one' -d /dev/null -s
/bin/false -n machine1$
adduser -g workstations -c 'Workstation number two' -d /dev/null -s
/bin/false -n machine2$
you said: create an user account belonging to the "workstations"
group, comment out this username in /etc/passwd with
"Workstation number one", let the user home directory be the
empty (/dev/null) and the preferred unix shell be the void
(/bin/false). Ah, I was forgetting that this user calls machine1$
Now go for the samba part: say
smbpasswd -a -m machine1
and you enter in /etc/smbpasswd a machibe account (the $ is
unnecessary here)
Now restart samba, have a cup of coffee and sit in front of a NT
machine (say, machine1)
- log on as Administrator (the "domain" row of login screen, if
present, should read the machine name!)
- go to control panel /network, click Change
-modify the machine name accordingly (this was machine1, isn't it?)
-choose to join a DOMAIN, and instead of DOMAIN, write your
domain name (what you wrote at the "workgroup" clause in
/etc/smb.conf?)
-don't check "create a machine account" it doesn't helps, that job
is what you just finished to do on unix before.
-you should see after a while the infamous "Welcome to the <your
name here> domain"
You're done!!
HTH
=========================================================
Damiano G. Preatoni
Dept. of Structural and Functional Biology
Faculty of Sciences - University of Insubria
Via J. H. Dunant, 3 - 21100 Varese - Italy
ph. +39 0332 421 538; fax +39 0332 421554
http://fauna.dipbsf.uninsubria.it/
ICQ #78690321
Odigo #2645129
=========================================================
"Advice is a dangerous gift.
Even from the wise to the wise.
For all courses may run ill."
J.R.R. Tolkien,
The Lord of the Rings
Return-Path: <ink at inconnu.isu.edu>
Delivered-To: samba at samba.org
Received: from inconnu.isu.edu (inconnu.isu.edu [134.50.8.55]) by
lists.samba.org (Postfix) with ESMTP id 7021942F4 for
<samba at samba.org>; Thu, 14 Jun 2001 13:10:28 -0700 (PDT)
Received: from localhost (ink at localhost) by inconnu.isu.edu
(8.9.3/8.9.3) with ESMTP id OAA19744; Thu, 14 Jun 2001 14:09:52 -0600
Date: Thu, 14 Jun 2001 14:09:52 -0600 (MDT)
From: Craig Kelley <ink at inconnu.isu.edu>
To: Cory Kearns <cory at texscan-msi.com>
Cc: <samba at samba.org>
Subject: Re: Problems with Windows 98
In-Reply-To: <002501c0f503$fa5586f0$18b52440 at texscan>
Message-ID: <Pine.LNX.4.32.0106141408590.568-100000 at inconnu.isu.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Thu, 14 Jun 2001, Cory Kearns wrote:
> Hopefully this is the correct place to come with this problem.
>
> I have Samba 2.2.0 running on FreeBSD 4.3-RELEASE. That all works fine and
> dandy, and did when I had the machine on a network with an NT machine
> handling the domain. However, when the samba machine accepts domain logons,
> Windows 98 machines take approx. 20 minutes to find anything on the network.
> NT machines work absolutely fine.
>
> Preferred master and such are set to yes and os level at 65. When I set os
> level to 0 and master browser settings to no, it found the machine right off
> the bat, but when selecting it to list its shares, that took approx 20
> minutes to display.
>
> I hope this is enough information.
I've always found that using WINS support is much more reliable.
Return-Path: <AdamG at hrrm.ucdavis.edu>
Delivered-To: samba at lists.samba.org
Received: from franc.ucdavis.edu (franc.ucdavis.edu [169.237.105.2]) by
lists.samba.org (Postfix) with ESMTP id 589EE4421 for
<samba at lists.samba.org>; Thu, 14 Jun 2001 13:23:49 -0700 (PDT)
Received: from athena.ucdavis.edu (hrrm.ucdavis.edu [169.237.48.1]) by
franc.ucdavis.edu (8.11.4/8.11.0/IT4.4.9) with ESMTP id f5EKNLq07862
for <samba at lists.samba.org>; Thu, 14 Jun 2001 13:23:21 -0700 (PDT)
Received: by hrrm.ucdavis.edu with Internet Mail Service (5.5.2653.19)
id <K92S2733>; Thu, 14 Jun 2001 13:23:24 -0700
Message-ID: <683DA182E53ED411A4310060B0675A902AA073 at hrrm.ucdavis.edu>
From: Adam Getchell <AdamG at hrrm.ucdavis.edu>
To: "'samba at lists.samba.org'" <samba at lists.samba.org>
Subject: RE: Joining NT4 domain with Samba 2.2.0
Date: Thu, 14 Jun 2001 13:23:18 -0700
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="us-ascii"
X-Converted-To-Plain-Text: from multipart/alternative by demime 0.98b
X-Converted-To-Plain-Text: Alternative section used was text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
It seems I have a problem with nmbd. Some further info I got from the logs
was:
Unusual System Events
=-=-=-=-=-=-=-=-=-=-=
Jun 14 11:49:22 SMBOX nmbd[1257]: [2001/06/14 11:49:22, 0]
nmbd/nmbd_become_lmb.c:become_local_master_stage2(405)
Jun 14 11:49:22 SMBOX nmbd[1257]: *****
Jun 14 11:49:22 SMBOX nmbd[1257]:
Jun 14 11:49:22 SMBOX nmbd[1257]: Samba name server SMBOX is now a local
master browser for workgroup MYDOM on subnet <SMBOX IP address>
Jun 14 11:49:22 SMBOX nmbd[1257]:
Jun 14 11:49:22 SMBOX nmbd[1257]: *****
Jun 14 11:49:44 SMBOX nmbd[1257]: [2001/06/14 11:49:44, 0]
nmbd/nmbd_browsesync.c:find_domain_master_name_query_fail(360)
Jun 14 11:49:44 SMBOX nmbd[1257]: find_domain_master_name_query_fail:
Jun 14 11:49:44 SMBOX nmbd[1257]: Unable to find the Domain Master Browser
name MYDOM<1b> for the workgroup MYDOM.
Jun 14 11:49:44 SMBOX nmbd[1257]: Unable to sync browse lists in this
workgroup.
Any advice? I'd rather not have to go back and install NT server to meet my
time deadline...
***************************
* Adam Getchell
AdamG at hrrm.ucdavis.edu
* System Architect/Programmer (530) 752-1584
* Human Resources Information Systems http://www.hr.ucdavis.edu/
***************************
"Invincibility is in oneself, vulnerability in the opponent." -- Sun Tzu
Return-Path: <jason at uniqsys.com>
Delivered-To: samba at samba.org
Received: from itchy.uniqsys.com (itchy.uniqsys.com [65.165.122.196]) by
lists.samba.org (Postfix) with ESMTP id EB3CE534E for
<samba at samba.org>; Thu, 14 Jun 2001 13:31:35 -0700 (PDT)
Received: from uniqsys.com (brain.uniqsys.com [65.165.122.199]) by
itchy.uniqsys.com (8.9.3/8.9.3) with ESMTP id QAA13064 for
<samba at samba.org>; Thu, 14 Jun 2001 16:31:04 -0400
Message-ID: <3B291F08.96E7641A at uniqsys.com>
Date: Thu, 14 Jun 2001 16:31:04 -0400
From: Jason Bechtel <jason at uniqsys.com>
Organization: Unique Systems, Inc.
X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.17-14 i686)
X-Accept-Language: en
MIME-Version: 1.0
To: samba at samba.org
Subject: smbmount from Linux to an AS/400
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I have searched the archives of this list for any mention of AS/400 or
OS/400 and found nothing. So, here it goes...
I have a Linux server trying to mount an SMB share from an IBM AS/400
machine running OS/400 version 4.3 or better (not my machine, but the
owner says so). It works, but not completely. One can do 'smbclient -U
username -L ipaddress' and specify a valid username and password and
display the list of shares. One can do 'smbclient -U username
\\\\ipaddress\\sharename' and gain access to the share, but when listing
the contents of the directory, only the first letter of each filesystem
object is visible!
I have not done extensive testing to verify the depth of the problem,
but this is obviously a slight problem with the implementation of
SMB/CIFS on the AS/400. IBM sells its proprietary Windows client
software, which allows Windows machines to map these shares in Network
Neighborhood, so it must be possible...
Has anyone run into this before? Has anyone figured out how to do this?
Thanks for listening,
Jason Bechtel
--
__________________________________ __________________________
/ Jason Bechtel \/ Phone: (419) 861-3331 \
/ Unique Systems, Inc. \ FAX: (419) 861-3340 \
) 6920 Spring Valley Drive, Ste. 106 ( (
\ Holland, OH 43528 / mailto:jason at uniqsys.com /
\__________________________________/\__________________________/
Return-Path: <rob at steinmetznet.com>
Delivered-To: samba at lists.samba.org
Received: from atl.steinmetznet.com (atl.steinmetznet.com
[38.212.143.60]) by lists.samba.org (Postfix) with ESMTP id 0A8C25379
for <samba at lists.samba.org>; Thu, 14 Jun 2001 13:44:36 -0700 (PDT)
Received: from steinmetznet.com (delilah [38.212.143.170]) by
atl.steinmetznet.com (8.8.8+Sun/8.8.8) with ESMTP id QAA00824; Thu, 14
Jun 2001 16:44:06 -0400 (EDT)
Message-ID: <3B29221B.8A6198B3 at steinmetznet.com>
Date: Thu, 14 Jun 2001 16:44:11 -0400
From: Robert Steinmetz <rob at steinmetznet.com>
Organization: Steinmetz & Associates
X-Mailer: Mozilla 4.7 [en] (WinNT; I)
X-Accept-Language: en
MIME-Version: 1.0
To: Samba <samba at lists.samba.org>
Subject: cannot Create Windows 98 Client Shares.
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I am running Samba 2.2.x I cannot seem to view the list of users when
creating a shared directory on Win98 with user level security when I
am logged on to a Win-NT domain. I get and error message "You cannot
view the list of users at this time. Please try again later." All users
are in smbpasswd and can log into the domain. I have found this problem
mentioned twice in the mailing list archives with no solution Offered. I
am sure I'm overlooking something simple.
If anyone has this working I would appreciate a post to this list just
so I know it will work.
The server is Solaris 2.6 x86 Samba is 2.2.0 compiled with gcc using all
defaults. File sharing, domain logins and printing are working file. I
am unable to get Shares for Windows 98 Clients to work correctly.
Here are the relevant (I hope) portions of my smb.conf file.
;
; Primary Domain Controller
;
netbios name = LUCRETIA
workgroup = ATLANTA
os level = 65
preferred master = yes
domain master = yes
local master = yes
;
; Security
;
security = user
encrypt passwords = yes
;
; Domain Logons
;
domain logons = yes
domain admin users = rob
logon path = \\LUCRETIA\profiles\%u
logon drive = U:
logon home = \\LUCRETIA\%u
logon script = %u.bat
;
; Shares for Domain Control
;
[netlogon]
path = /usr/local/samba/netlogon
writable = no
write list = root
;shares for storing user profiles
[profiles]
path = /usr/local/samba/profiles
writable = yes
create mask = 0600
sdirectory mask = 0700
--
Robert Steinmetz, AIA
Principal
Steinmetz & Associates
New Orleans Atlanta
Return-Path: <oliver at samera.com.py>
Delivered-To: samba at lists.samba.org
Received: from Polaris.Pla.net.PY (polaris.pla.net.py [216.250.196.10])
by lists.samba.org (Postfix) with ESMTP id 4FD93537D for
<samba at lists.samba.org>; Thu, 14 Jun 2001 13:58:04 -0700 (PDT)
Received: (from uucp at localhost) by Polaris.Pla.net.PY (8.11.2/8.11.2)
with UUCP id f5ECveJ17184; Thu, 14 Jun 2001 16:57:40 +0400
Received: from samera.com.py (sojourner.samera.com [192.168.1.1]) by
samera.com (8.9.3/8.9.3) with ESMTP id QAA28596; Thu, 14 Jun 2001
16:35:07 -0400
Message-ID: <3B291FF8.2030207 at samera.com.py>
Date: Thu, 14 Jun 2001 16:35:04 -0400
From: "Oliver Schulze L." <oliver at samera.com.py>
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:0.9.1)
Gecko/20010607 Netscape6/6.1b1
X-Accept-Language: en-us, es-py
MIME-Version: 1.0
To: "Nathan E. Pralle" <npralle at creativesolutionsunlimited.com>
Cc: samba at lists.samba.org
Subject: Re: Zip Drive + Samba + Winblows
References: <5.0.2.1.2.20010614130528.00aea150 at creativesolutionsunlimite
d.com>
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Maybe Samba keep opened some files, try looking in smbstatus for the
opened files.
Also, check that in your script you are not in the mount point of the zip.
Do something like this in your script:
cd /tmp
smbstatus >> /tmp/samba_zip.log
umount /mnt/zip
Oliver
Nathan E. Pralle wrote:
> All,
>
> Problem: I have a ||port zip drive mounted on our Linux box, shared
> by Samba to the Winblows network. I could easily use the
> "preexec/postexec" to mount it, then eject the disk, but the problem
> is that linux won't eject the disk (unmount it) while Samba is
> running. I first have to kill Samba, then eject.
>
> Well, of course, how do you kill Samba then expect it to run the
> postexec! You can't, of course, so I'm up a bit of a creek.
>
> Anyone have a good solution to this one? I have an office full of
> ID10T Winblows users that couldn't tell a shell prompt from their
> earlobe.
>
> Thanks,
>
> Nathan
--
Oliver Schulze L.
oliver at samera.com.py
Asuncion-Paraguay
Return-Path: <chrish at apc.edu.ph>
Delivered-To: samba at lists.samba.org
Received: from mail.apc.edu.ph (unknown [203.87.128.134]) by
lists.samba.org (Postfix) with ESMTP id BBA0E4A55 for
<samba at lists.samba.org>; Thu, 14 Jun 2001 16:43:50 -0700 (PDT)
Received: from cgharavata ([10.106.1.125]) by mail.apc.edu.ph
(8.9.3/8.8.7) with SMTP id HAA11106; Fri, 15 Jun 2001 07:32:41 +0800
Reply-To: <chrish at apc.edu.ph>
From: "Chris G Haravata" <chrish at apc.edu.ph>
To: <thomas.rice at rsdmail.k12.ar.us>, <samba at lists.samba.org>
Subject: RE: SuSe 7.1 and Samba
Date: Fri, 15 Jun 2001 07:24:22 +0800
Message-ID: <AJEDKMGKCNNHONCEHBEGCECICBAA.chrish at apc.edu.ph>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0)
In-Reply-To: <200106141339.AA70385928 at rsdmail.k12.ar.us>
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
there already is a Samba v2.0.8 rpm that came along with the SuSE 7.1 CD.
If you dowloaded it, you can go to
ftp://ftp.suse.com/pub/suse/i386/7.1/suse/contents/
happy hunting...
Chris Haravata
-----Original Message-----
From: samba-admin at lists.samba.org [mailto:samba-admin at lists.samba.org]On
Behalf Of Thomas Rice
Sent: Friday, June 15, 2001 2:39 AM
To: samba at lists.samba.org
Subject: SuSe 7.1 and Samba
--- Newbie Warning ---
Where do I find a version of Samba that will run on SuSE 7.1? I can only
find Samba for SuSE 6.1 on ftp.samba.org
Thanks for the help!
--- Newbie signing off ---
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <Anna.Sabeva-Romaniuk at icn.siemens.com>
Delivered-To: samba at samba.org
Received: from brmx1.fl.icn.siemens.com (brmx1.fl.icn.siemens.com
[12.147.96.32]) by lists.samba.org (Postfix) with ESMTP id A384844F3
for <samba at samba.org>; Thu, 14 Jun 2001 16:51:23 -0700 (PDT)
Received: from boca210a.boca.ssc.siemens.com
(boca210a.boca.ssc.siemens.com [165.218.12.110]) by
brmx1.fl.icn.siemens.com (8.9.3/8.9.3) with ESMTP id SAA26755 for
<samba at samba.org>; Thu, 14 Jun 2001 18:47:07 -0400 (EDT)
Received: by boca210a.boca.ssc.siemens.com with Internet Mail Service
(5.5.2653.19) id <MY7RT7JQ>; Thu, 14 Jun 2001 18:52:18 -0400
Message-ID: <4B8DD52AB570D311BEDE0008C7E61988040EB3A9 at boca212a.boca.ssc.
siemens.com>
From: "Sabeva-Romaniuk, Anna" <Anna.Sabeva-Romaniuk at icn.siemens.com>
To: "'samba at samba.org'" <samba at samba.org>
Subject: Samba problem
Date: Thu, 14 Jun 2001 18:51:56 -0400
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi ,
I'm running a Windows 2000 and Linux. When I try to run samba I'm getting a
follow error and I'm not able to map my drive:
See bellow:
C:\batch>net use X: \\as836504L\surpass_share /user:as836504L\as836504
error:
C:\Documents and Settings\as836504\Desktop>net use X:
\\as836504L\surpass_share
/user:as836504L\as836504
System error 67 has occurred.
The network name cannot be found.
Do you know what is happening?
If you need more details just e-mail me and I will provide you with more
infoo
My work phone number is 561-923-3840
Thank you very much for your help
Anna Sabeva-Romaniuk
Return-Path: <bongtumanut at yahoo.com>
Delivered-To: samba at lists.samba.org
Received: from web14008.mail.yahoo.com (web14008.mail.yahoo.com
[216.136.175.124]) by lists.samba.org (Postfix) with SMTP id 6D0BA42F6
for <samba at lists.samba.org>; Thu, 14 Jun 2001 17:07:59 -0700 (PDT)
Message-ID: <20010615001242.88482.qmail at web14008.mail.yahoo.com>
Received: from [64.216.142.242] by web14008.mail.yahoo.com; Thu, 14 Jun
2001 17:12:42 PDT
Date: Thu, 14 Jun 2001 17:12:42 -0700 (PDT)
From: Bong Tumanut <bongtumanut at yahoo.com>
Subject: smbclient -L => connection to samba failed
To: samba at lists.samba.org
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Help! I'm new to linux and samba. I've spent a couple
of days already searching the web for clues to solve
my problem. My problem:
I've been going through the DIAGNOSIS.txt tests. On
the linux machine, the following works:
smbclient -L xxx
where xxx is either "localhost", "127.0.0.1", or
"10.0.0.10" but not "samba". I have samba assigned to
10.0.0.10 in the /etc/hosts file. I can ping samba.
smbclient -L to Windows 98 also works.
Any clues? What can I check?
Bong Tumanut
__________________________________________________
Do You Yahoo!?
Spot the hottest trends in music, movies, and more.
http://buzz.yahoo.com/
Return-Path: <dennis.moreno at pop.safetran.com>
Delivered-To: samba at lists.samba.org
Received: from endeavor.safetran.com (endeavor.safetran.com
[207.175.180.130]) by lists.samba.org (Postfix) with ESMTP id
0547152F8 for <samba at lists.samba.org>; Thu, 14 Jun 2001 17:21:24 -0700
(PDT)
Received: from pop.safetran.com (defiant [10.232.48.55]) by
endeavor.safetran.com (no.no.no/no.no.no) with ESMTP id OAA26631; Thu,
14 Jun 2001 14:30:53 -0700 (PDT)
Message-ID: <3B292D0D.40168D23 at pop.safetran.com>
Date: Thu, 14 Jun 2001 14:30:53 -0700
From: dennis <dennis.moreno at pop.safetran.com>
X-Mailer: Mozilla 4.77 [en] (WinNT; U)
X-Accept-Language: en
MIME-Version: 1.0
To: Richard Trott <trott at library.ucsf.edu>, samba at lists.samba.org
Subject: Re: samba truncating passwords
References: <Pine.GSO.4.31.0106141112200.5111-100000 at huey.ckm.ucsf.edu>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi
Unfortunately no. I haven't gotten any responses from any of my
emailing.
What I've done in the meantime is reset passwords to 8 characters or
less
as needed. Hopefully I'll get a response soon.
Dennis
Richard Trott wrote:
>
> I'm having the same exact 8-character-limit-on-new-passwords problem and
> haven't been able to solve it. (security=user, encrypt
> passwords=yes) If you have found a solution, I would be most grateful if
> you would share it.
>
> Rich
Return-Path: <dennis.moreno at pop.safetran.com>
Delivered-To: samba at lists.samba.org
Received: from endeavor.safetran.com (endeavor.safetran.com
[207.175.180.130]) by lists.samba.org (Postfix) with ESMTP id
14760537E for <samba at lists.samba.org>; Thu, 14 Jun 2001 17:21:25 -0700
(PDT)
Received: from pop.safetran.com (defiant [10.232.48.55]) by
endeavor.safetran.com (no.no.no/no.no.no) with ESMTP id OAA26578; Thu,
14 Jun 2001 14:24:32 -0700 (PDT)
Message-ID: <3B292B90.87AF0325 at pop.safetran.com>
Date: Thu, 14 Jun 2001 14:24:32 -0700
From: dennis <dennis.moreno at pop.safetran.com>
X-Mailer: Mozilla 4.77 [en] (WinNT; U)
X-Accept-Language: en
MIME-Version: 1.0
To: samba at lists.samba.org
Cc: bbstone at amherst.edu
Subject: RE: Network recycle bin in July issue of SysAdmin Mag
References: <20010614174809.EB7605259 at lists.samba.org>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi
I thought someone might want to know how this worked out for me.
I'm running Sol 2.8 SPARC, Samba 2.2.0 on a test server.
I applied the patches to my samba server source then recompiled and
installed
per the instructions supplied with the patches.
So far, the recycle bin works as described except when you use variables
in the "recycle bin" param.
When I try to use a variable in the "recycle bin" parameter, it does a
literal
interpretation and it creates a new subdirectory named %(whatever). :-)
Here's my test share config in smb.conf:
=============================================
[homes]
comment = User Home Directory
valid users = %S
read only = No
create mask = 0755
case sensitive = No
browseable = No
delete readonly = Yes
recycle bin = /vol02/recyclebin/%S
writeable = Yes
[oops]
comment = My Deleted Files
path = /vol02/recyclebin/%S
browseable = Yes
[test]
comment = For testing only
path = /vol02/users
read only = no
guest ok = yes
browseable = Yes
=============================================
247 % ll /vol02/recyclebin
total 10
drwxr-xr-x 2 dtm staff 512 Jun 14 13:52 %S/ <---This
is the directory it created.
drwxr-xr-x 2 dtm staff 512 Jun 14 13:57 %U/ <---This
is the directory it created
drwxrwxrwx 5 root staff 512 Jun 14 13:57 ./ when I
used %U instead of %S in
drwxr-xr-x 6 root root 512 Jun 14 10:17 ../
"recycle bin =".
Actually, the recycle bin functionality is great if we can get it
to work completely.
Anyone know how I can fix this?
Dennis
Return-Path: <murugappan at hgsolutions.com>
Delivered-To: samba at samba.org
Received: from host2.ecsecure.com (host2.ecsecure.com [209.239.38.173])
by lists.samba.org (Postfix) with ESMTP id 9F2625424 for
<samba at samba.org>; Thu, 14 Jun 2001 17:25:48 -0700 (PDT)
Received: from hg04 ([64.64.109.149]) by host2.ecsecure.com
(8.10.2/8.10.2) with SMTP id f5ENSGY10808; Thu, 14 Jun 2001 19:28:16
-0400
Message-ID: <001401c0f531$affbc7d0$956d4040 at hg04>
From: "Murugappan" <murugappan at hgsolutions.com>
To: <prea at uninsubria.it>, <samba at samba.org>
References: <3B292F36.15674.922D24 at localhost>
Subject: Re: samba help pls
Date: Thu, 14 Jun 2001 19:25:31 -0500
Organization: Hourglass Solutions Inc.
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4522.1200
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hello
A basic question
I installed samba 2.2 version . But already samba 2.0.7 version is
installed. If i do rpm -q samba it points to 2.0.7 version. How to uninstall
samba 2.0.7 on my server or point samba 2.2 as my default.
1 more question..... when my linux OS boots
it says
starting atd -----FAILED..
whats this panic..
P.Murugappan
----- Original Message -----
From: "Damiano G. Preatoni" <prea at uninsubria.it>
To: "Murugappan" <murugappan at hgsolutions.com>; <samba at samba.org>
Sent: Thursday, June 14, 2001 2:40 PM
Subject: Re: samba help pls
> On 14 Jun 2001, at 10:08, Murugappan wrote:
>
> >
> > I have some NT machines and recently purchased a HP NET server. Just
installed
> > Redhat Linux 7.1. I am planning to make my Linux machine as my PDC,File
> > server,Print srever etc..so that usernames and passwords are
authenticated by
> > the Linux server.
>
> Nice idea!
> It's two years I have set up a Compaq ProLiant 1600 dual-PIII as a
> workgroup server, using RH 6.2 and samba 2.0.7 (a BIG thank to
> David Bannon!!!)
>
> > Here in second statement I don't have a bin directory at all under my
> > etc/samba.but blindly I have followed the steps. Is this right.
> ^^^^^^^^^^^^^
>
> Please, you're on a *nix system.
> It's assumed you're aware of what you're doing.
>
> Use the samba 2.0.7 rpm, and everything will be in place.
> David's setup is slightly different, but don't worry.
>
> After installing the RPM, the only thing you should need is ti edit
> /etc/smb.conf
>
>
> > status = yes
> never seen such a line in smb.conf. Remove it.
>
> > workgroup = MYDOMAIN (*)
> here goes your shiny brand new domain name. Mine is UAGB, that
> is the acronym of the research unit where I work.
>
> > wins server = 123.45.67.89 (*)
> remove this also, here goes the IP address of your WINS server (if
> you have any)
>
> > encrypt passwords = yes
> > domain logons =yes
> > domain admin group = @adm
> > guest account = ftp
> > share modes=no
> > os level=65
>
> So far, so good. These are fine.
>
> > [homes]
> > guest ok = no
> > read only = no
> > create mask = 0700
> > directory mask = 0700
> > oplocks = false
> > locking = no
> OK!
>
> > [netlogon]
> > path = /etc/samba/netlogon
> > writeable = no
> > guest ok = no
> >
> > Here is the wins server is my Primary DNS server.
> strange address, you WINS server... IS really 123.45.67.89??? are
> you on a VPN?
>
> >
> > ---------------3) Then started samba by saying samba start.
> > there are 2 processes running smbd and nmbd.
> Right.
> say ps -aux | grep samba and you should see them
>
>
> > ------------4)Next I followed these steps to set up NT clients
> >
> > touch /etc/samba/private/smbpasswd
> the RPM installs under /etc/smbpasswd
>
> > chmod go-rwx /etc/samba/private/smbpasswd
> No! chmod 0600 and chown root.root
>
> > at this stage too I am not sure whats going around...
> :) Hold on!
> >
> > ----------------5) At step 5 the document says the following.
> >
> > Now add an NT machine account,
>
> Here 's the trick:
> AS ROOT:
> you have to create once and forever a group called "workstations"
> (or anything you like, but calling the group which contains all the
> workstations "workstations" is nice)
>
> groupadd workstations
>
> then create the unix machine accounts: assume I have machine1
> and machine2
>
> adduser -g workstations -c 'Workstation number one' -d /dev/null -s
> /bin/false -n machine1$
>
> adduser -g workstations -c 'Workstation number two' -d /dev/null -s
> /bin/false -n machine2$
>
> you said: create an user account belonging to the "workstations"
> group, comment out this username in /etc/passwd with
> "Workstation number one", let the user home directory be the
> empty (/dev/null) and the preferred unix shell be the void
> (/bin/false). Ah, I was forgetting that this user calls machine1$
>
> Now go for the samba part: say
> smbpasswd -a -m machine1
>
> and you enter in /etc/smbpasswd a machibe account (the $ is
> unnecessary here)
>
> Now restart samba, have a cup of coffee and sit in front of a NT
> machine (say, machine1)
>
> - log on as Administrator (the "domain" row of login screen, if
> present, should read the machine name!)
>
> - go to control panel /network, click Change
> -modify the machine name accordingly (this was machine1, isn't it?)
> -choose to join a DOMAIN, and instead of DOMAIN, write your
> domain name (what you wrote at the "workgroup" clause in
> /etc/smb.conf?)
> -don't check "create a machine account" it doesn't helps, that job
> is what you just finished to do on unix before.
>
> -you should see after a while the infamous "Welcome to the <your
> name here> domain"
>
> You're done!!
>
> HTH
>
>
>
>
> =========================================================
> Damiano G. Preatoni
> Dept. of Structural and Functional Biology
> Faculty of Sciences - University of Insubria
> Via J. H. Dunant, 3 - 21100 Varese - Italy
> ph. +39 0332 421 538; fax +39 0332 421554
> http://fauna.dipbsf.uninsubria.it/
> ICQ #78690321
> Odigo #2645129
> =========================================================
> "Advice is a dangerous gift.
> Even from the wise to the wise.
> For all courses may run ill."
> J.R.R. Tolkien,
> The Lord of the Rings
>
Return-Path: <schhibber at powersurfr.com>
Delivered-To: samba at lists.samba.org
Received: from ike-ext.ab.videon.ca (ike-ext.ab.videon.ca
[206.75.216.35]) by lists.samba.org (Postfix) with SMTP id 554264549
for <samba at lists.samba.org>; Thu, 14 Jun 2001 17:37:55 -0700 (PDT)
Received: (qmail 1193 invoked from network); 15 Jun 2001 00:42:38 -0000
Received: from unknown (HELO dreamtime) ([24.108.93.115])
(envelope-sender <schhibber at powersurfr.com>) by ike-ext.ab.videon.ca
(qmail-ldap-1.03) with SMTP for <samba at lists.samba.org>; 15 Jun 2001
00:42:38 -0000
Message-ID: <006a01c0f53a$11f151f0$c800000a at dreamtime>
From: "Sanjeev Chhibber" <schhibber at powersurfr.com>
To: "Samba mail list" <samba at lists.samba.org>
References: <20010615001242.88482.qmail at web14008.mail.yahoo.com>
Subject: password expiration and changing
Date: Thu, 14 Jun 2001 19:25:32 -0600
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.00.3018.1300
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Is it possible ot expire passwords?
And does anybody know of away to change the password without directly
interacting with samba server.
Via web interface...or script..
Or simply through windows.
Thanks
SOno
Return-Path: <barry at arhosting.com>
Delivered-To: samba at samba.org
Received: from arhosting.com (arhosting.com [216.63.180.37]) by
lists.samba.org (Postfix) with SMTP id 512C3469B for
<samba at samba.org>; Thu, 14 Jun 2001 17:48:30 -0700 (PDT)
Received: (qmail 5998 invoked from network); 15 Jun 2001 00:37:13 -0000
Received: from unknown (HELO piii600) (10.10.5.2) by arhosting.com with
SMTP; 15 Jun 2001 00:37:13 -0000
From: "Barry Smoke" <barry at arhosting.com>
To: <jfeise at ics.uci.edu>, <samba at samba.org>
Subject: RE: (no subject)
Date: Thu, 14 Jun 2001 18:59:52 -0500
Message-ID: <IMEKIDMFAEBICGFFGJPKAEHDFMAA.barry at arhosting.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0)
In-Reply-To: <3B28D148.D86F1FE at ics.uci.edu>
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Well actually an ssl enabled smbclient would be really nice
-----Original Message-----
From: samba-admin at lists.samba.org [mailto:samba-admin at lists.samba.org]On
Behalf Of Joachim Feise
Sent: Thursday, June 14, 2001 9:59 AM
To: samba at samba.org
Subject: Re: (no subject)
Russ Ward wrote:
>
> Does anyone know of a port of smbclient to windows?
What for?
SMB is native to Windows, so if you want to copy files, you can
just use Explorer or a command prompt, or write a batch file.
-Joe
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <gcarter at valinux.com>
Delivered-To: samba at lists.samba.org
Received: from mail.valinux.com (mail.valinux.com [198.186.202.175]) by
lists.samba.org (Postfix) with ESMTP id 37DE7448D for
<samba at lists.samba.org>; Thu, 14 Jun 2001 18:31:09 -0700 (PDT)
Received: from beefcake.hdqt.valinux.com ([10.1.0.14] helo=localhost
ident=root) by mail.valinux.com with esmtp (Exim 3.22 #1 (Debian)) id
15AhPt-00069n-00; Thu, 14 Jun 2001 17:24:49 -0700
Date: Thu, 14 Jun 2001 19:31:38 -0500 (CDT)
From: Gerald Carter <gcarter at valinux.com>
X-X-Sender: <gcarter at pogo.plainjoe.org>
To: Eric Boucher <eric_boucher60 at yahoo.com>
Cc: SAMBA <samba at lists.samba.org>
Subject: Re: No printers in the share list with smbclient
In-Reply-To: <20010613172609.49632.qmail at web9404.mail.yahoo.com>
Message-ID: <Pine.LNX.4.33.0106141000420.3526-100000 at pogo.plainjoe.org>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Wed, 13 Jun 2001, Eric Boucher wrote:
> Hi,
>
> I am trying to see all my printers onto the network
> via the "smbclient -NL" client. I did the most simple
> "smb.conf" file that I can do to see all my printers
> but I don't see them. Here is my "smb.conf"
> parameters:
>
> [global]
>
> ...
> ...
> printcap name = /etc/printcap
> printing = bsd
add 'load printers = yes' here. It should be a global option
> ...
> ...
>
> [printers]
> print ok = yes
> path = /var/spool/samba
> browseable = NO
> load printers = yes
----------------------------------------------------------------------
/\ Gerald (Jerry) Carter Professional Services
\/ http://www.valinux.com/ VA Linux Systems gcarter at valinux.com
http://www.samba.org/ SAMBA Team jerry at samba.org
http://www.plainjoe.org/ jerry at plainjoe.org
"...a hundred billion castaways looking for a home."
- Sting "Message in a Bottle" ( 1979 )
Return-Path: <gcarter at valinux.com>
Delivered-To: samba at lists.samba.org
Received: from mail.valinux.com (mail.valinux.com [198.186.202.175]) by
lists.samba.org (Postfix) with ESMTP id B02EC427C for
<samba at lists.samba.org>; Thu, 14 Jun 2001 18:31:19 -0700 (PDT)
Received: from beefcake.hdqt.valinux.com ([10.1.0.14] helo=localhost
ident=root) by mail.valinux.com with esmtp (Exim 3.22 #1 (Debian)) id
15AhPc-00068y-00; Thu, 14 Jun 2001 17:24:32 -0700
Date: Thu, 14 Jun 2001 19:31:21 -0500 (CDT)
From: Gerald Carter <gcarter at valinux.com>
X-X-Sender: <gcarter at pogo.plainjoe.org>
To: Rich Graves <rcgraves at brandeis.edu>
Cc: <samba at lists.samba.org>
Subject: Re: Stuffing smbpasswd into an NT PDC?
In-Reply-To: <Pine.LNX.4.33.0106121125190.29267-100000 at quixote.unet.bran
d eis.edu>
Message-ID: <Pine.LNX.4.33.0106141025520.3526-100000 at pogo.plainjoe.org>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Tue, 12 Jun 2001, Rich Graves wrote:
> Yes. But to restate the main point of my question, has anyone else
> done the work of stuffing encrypted passwords from /etc/smbpasswd into
> an NT PDC before? I don't want to reassign or crack passwords. In
> theory, I don't need to, because I have the hashes and know where they
> need to go in the SAM.
>
> It's been four years since that tantalizing paragraph was put in the
> pwdump readme. Has no one followed through with it?
Not that I know of.
Cheers, jerry
----------------------------------------------------------------------
/\ Gerald (Jerry) Carter Professional Services
\/ http://www.valinux.com/ VA Linux Systems gcarter at valinux.com
http://www.samba.org/ SAMBA Team jerry at samba.org
http://www.plainjoe.org/ jerry at plainjoe.org
"...a hundred billion castaways looking for a home."
- Sting "Message in a Bottle" ( 1979 )
Return-Path: <gcarter at valinux.com>
Delivered-To: samba at lists.samba.org
Received: from mail.valinux.com (mail.valinux.com [198.186.202.175]) by
lists.samba.org (Postfix) with ESMTP id DAC3B524E for
<samba at lists.samba.org>; Thu, 14 Jun 2001 18:31:19 -0700 (PDT)
Received: from beefcake.hdqt.valinux.com ([10.1.0.14] helo=localhost
ident=root) by mail.valinux.com with esmtp (Exim 3.22 #1 (Debian)) id
15AhPR-00068M-00; Thu, 14 Jun 2001 17:24:21 -0700
Date: Thu, 14 Jun 2001 19:31:10 -0500 (CDT)
From: Gerald Carter <gcarter at valinux.com>
X-X-Sender: <gcarter at pogo.plainjoe.org>
To: Corey <coreyu at sympatico.ca>
Cc: <samba at lists.samba.org>
Subject: Re: Constant Log Error.
In-Reply-To: <05924A4A9DEDAD46A21EE3C8C64B090D1D1C58 at cheetah.zoo.q9netwo
r ks.com>
Message-ID: <Pine.LNX.4.33.0106141030040.3526-100000 at pogo.plainjoe.org>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Tue, 12 Jun 2001, Corey wrote:
> I constantly get this error in my log file and it offers no help to me
> really, anyone have any ideas what this could be?
>
> #
> [2001/06/12 14:41:27, 1] smbd/reply.c:reply_sesssetup_and_X(990)
> Username is invalid on this system
> #
the client tried an anonymous connection (no username) from the
looks of it.
Cheers, jerry
----------------------------------------------------------------------
/\ Gerald (Jerry) Carter Professional Services
\/ http://www.valinux.com/ VA Linux Systems gcarter at valinux.com
http://www.samba.org/ SAMBA Team jerry at samba.org
http://www.plainjoe.org/ jerry at plainjoe.org
"...a hundred billion castaways looking for a home."
- Sting "Message in a Bottle" ( 1979 )
Return-Path: <gcarter at valinux.com>
Delivered-To: samba at samba.org
Received: from mail.valinux.com (mail.valinux.com [198.186.202.175]) by
lists.samba.org (Postfix) with ESMTP id 0885B5268; Thu, 14 Jun 2001
18:31:20 -0700 (PDT)
Received: from beefcake.hdqt.valinux.com ([10.1.0.14] helo=localhost
ident=root) by mail.valinux.com with esmtp (Exim 3.22 #1 (Debian)) id
15AhPI-00068D-00; Thu, 14 Jun 2001 17:24:12 -0700
Date: Thu, 14 Jun 2001 19:31:01 -0500 (CDT)
From: Gerald Carter <gcarter at valinux.com>
X-X-Sender: <gcarter at pogo.plainjoe.org>
To: Ephi Dror <edror at panasas.com>
Cc: <samba-technical at samba.org>
Subject: Re: Oplock support for BSD?
In-Reply-To: <000401c0f37e$37035cd0$da8411ac at GORSUCH>
Message-ID: <Pine.LNX.4.33.0106141030580.3526-100000 at pogo.plainjoe.org>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Moved to samba-technical...
On Tue, 12 Jun 2001, Ephi Dror wrote:
> Hi All,
>
> Does anyone know if there is a work in progress to support Oplock on
> any of the BSD based OSs (FreeBSD, OpenBSD, NetBSD, etc.) besides
> Linux and Irix.
No idea. Does anyone have word on this?
>
> If yes, I would like to know if I can help. If not, is there any
> technical problems to support it.
>
> Thanks a lot,
> Ephi
>
jerry
----------------------------------------------------------------------
/\ Gerald (Jerry) Carter Professional Services
\/ http://www.valinux.com/ VA Linux Systems gcarter at valinux.com
http://www.samba.org/ SAMBA Team jerry at samba.org
http://www.plainjoe.org/ jerry at plainjoe.org
"...a hundred billion castaways looking for a home."
- Sting "Message in a Bottle" ( 1979 )
Return-Path: <don_mccall at hp.com>
Delivered-To: samba at lists.samba.org
Received: from palrel10.hp.com (palrel10.hp.com [192.151.10.58]) by
lists.samba.org (Postfix) with ESMTP id 8E1834245 for
<samba at lists.samba.org>; Thu, 14 Jun 2001 20:11:51 -0700 (PDT)
Received: from xparelay1.corp.hp.com (unknown [15.58.136.173]) by
palrel10.hp.com (Postfix) with ESMTP id 5D4261F6E4; Thu, 14 Jun 2001
20:16:34 -0700 (PDT)
Received: from xpabh2.corp.hp.com (xpabh2.corp.hp.com [15.58.136.192])
by xparelay1.corp.hp.com (Postfix) with ESMTP id BE4781F534; Thu, 14
Jun 2001 20:16:12 -0700 (PDT)
Received: by xpabh2.corp.hp.com with Internet Mail Service (5.5.2653.19)
id <M6X9476Z>; Thu, 14 Jun 2001 20:16:32 -0700
Message-ID: <079FD72E42C9D311B854009027650E6F04050ACC at xatl02.atl.hp.com>
From: "MCCALL,DON (HP-USA,ex1)" <don_mccall at hp.com>
To: 'Bong Tumanut' <bongtumanut at yahoo.com>, samba at lists.samba.org
Subject: RE: smbclient -L => connection to samba failed
Date: Thu, 14 Jun 2001 20:16:30 -0700
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Do you have a line in smb.conf that assigns the name 'samba' as your netbios
name?
netbios name = samba
Hope this helps,
don
-----Original Message-----
From: Bong Tumanut [mailto:bongtumanut at yahoo.com]
Sent: Thursday, June 14, 2001 20:13
To: samba at lists.samba.org
Subject: smbclient -L => connection to samba failed
Help! I'm new to linux and samba. I've spent a couple
of days already searching the web for clues to solve
my problem. My problem:
I've been going through the DIAGNOSIS.txt tests. On
the linux machine, the following works:
smbclient -L xxx
where xxx is either "localhost", "127.0.0.1", or
"10.0.0.10" but not "samba". I have samba assigned to
10.0.0.10 in the /etc/hosts file. I can ping samba.
smbclient -L to Windows 98 also works.
Any clues? What can I check?
Bong Tumanut
__________________________________________________
Do You Yahoo!?
Spot the hottest trends in music, movies, and more.
http://buzz.yahoo.com/
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <bharanis at ssi-technologies.com>
Delivered-To: samba at samba.org
Received: from madras.ssi-technologies.com (unknown [202.140.152.200])
by lists.samba.org (Postfix) with ESMTP id 4330B442B for
<samba at samba.org>; Thu, 14 Jun 2001 21:28:38 -0700 (PDT)
Received: by MADRAS with Internet Mail Service (5.5.2653.19) id
<M73PQMY7>; Fri, 15 Jun 2001 10:02:34 +0530
Message-ID: <CEDCC58BE65CD511985D00A0C9C8532F2460B6 at MADRAS>
From: Bharani Subramanian <bharanis at ssi-technologies.com>
To: samba at samba.org
Subject: Text files
Date: Fri, 15 Jun 2001 10:02:34 +0530
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
i have successfully installed the samba server in our environment. but i
have problems with text fiels. is there an option like "Text" mode transfer
available.please help
regards
Bharani
Return-Path: <rjv at andrew.cmu.edu>
Delivered-To: samba at samba.org
Received: from smtp7.andrew.cmu.edu (SMTP7.ANDREW.CMU.EDU [128.2.10.87])
by lists.samba.org (Postfix) with ESMTP id 5D67552F5 for
<samba at samba.org>; Thu, 14 Jun 2001 21:41:17 -0700 (PDT)
Received: from UNIX4.ANDREW.CMU.EDU (UNIX4.ANDREW.CMU.EDU
[128.2.11.204]) by smtp7.andrew.cmu.edu (8.12.0.Beta7/8.12.0.Beta7)
with ESMTP id f5F4jjIG005963 for <samba at samba.org>; Fri, 15 Jun 2001
00:45:45 -0400
Date: Fri, 15 Jun 2001 00:45:45 -0400 (EDT)
From: Rohan Vaidya <rjv at andrew.cmu.edu>
To: samba at samba.org
Subject: Simple help
Message-ID: <Pine.GSO.4.21L.0106150042130.29271-100000 at unix4.andrew.cmu.
edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
I have a lot of data on a computer running W2K that I need to access from
a list of machines running Digital Unix. I have installed Samba on the
unix machines, but now do not know how to set it up to actually access the
Windows data. I do not know what exactly I have to coordinate in the W2K
machine and the Unix machine to make them both accessible from the
other. Please explain this to me in layman's terms, if you can.
Thanks,
Rohan Vaidya.
Return-Path: <Administrator at josims.com>
Delivered-To: samba at samba.org
Received: from core.josims.com (core.josims.com [195.89.188.194]) by
lists.samba.org (Postfix) with ESMTP id EBCC753A4 for
<samba at samba.org>; Fri, 15 Jun 2001 00:11:19 -0700 (PDT)
Received: by CORE with Internet Mail Service (5.5.2650.21) id
<MK1ZDJR3>; Fri, 15 Jun 2001 08:16:01 +0100
Message-ID: <C2ADBF38E1F4D3118F9F0060082151A501F680 at CORE>
From: Andrew Lyon <Administrator at josims.com>
To: "'samba at samba.org'" <samba at samba.org>
Subject: ACL's using Redhat 6.2 rpm binary ?
Date: Fri, 15 Jun 2001 08:15:54 +0100
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2650.21)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
Does the RPM for RedHat 6.2 have ACL support enabled? If not can I compile
from tarball and replace a few files to add support? If so which files.
Thanks
Andy
************************************************************
Registered Office:
J.O. Sims Ltd
Pudding Lane
Pinchbeck
Spalding
Lincs
PE11 3TJ
Company reg No: 2084187 Vat reg No: GB 437 4621 47
Tel: +44 (0) 1775 842100
Fax: +44 (0) 1775 842101
Web: www.josims.com
Email: enquiries at josims.com
************************************************************
The information contained in this e-mail is confidential
and is intended for the addressee only. The contents of
this e-mail must not be disclosed or copied without the
sender's consent. If you are not the intended recipient of
the message, please notify the sender immediately, and
delete the message.
The statements and opinions expressed in this message are
those of the author and do not necessarily reflect those
of the company. No commitment may be inferred from the
contents unless explicitly stated. The company does not
take any responsibility for the personal views of the
author.
This message has been scanned for viruses before sending,
but the company does not accept any responsibility for
infection and recommends that you scan any attachments.
************************************************************
Return-Path: <Makis.Marmaridis at learnnow.com.au>
Delivered-To: samba at lists.samba.org
Received: from exchange.angusknight.com.au (unknown [203.111.32.252]) by
lists.samba.org (Postfix) with ESMTP id E8FC853A8 for
<samba at lists.samba.org>; Fri, 15 Jun 2001 00:16:58 -0700 (PDT)
Received: from akln01 (203.111.32.252 [203.111.32.252]) by
exchange.angusknight.com.au with SMTP (Microsoft Exchange Internet
Mail Service Version 5.5.2653.13) id ML48YL9X; Fri, 15 Jun 2001
17:19:41 +1000
From: "Makis Marmaridis" <Makis.Marmaridis at learnnow.com.au>
To: "'Michael L Torrie'" <torriem at cs.byu.edu>
Cc: <samba at lists.samba.org>
Subject: RE: Using disk cloning software and samba pdc
Date: Fri, 15 Jun 2001 17:22:16 +1000
Message-ID: <000001c0f56b$e9bda6c0$943c0a0a at akln01>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0)
In-Reply-To: <Pine.LNX.4.33.0106141202590.26871-100000 at verdi.cs.byu.edu>
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi Michael,
a while back I had exactly the same dillemas, the only difference was I was
using Windows NT workstations.
If you image the machines after they have joined the domain and maintain the
password for their machine account on the PDC that should work (I tried it
on one machine and worked) what you have to keep in mind though is that this
password actually changes periodically!
For NT it changes every 7 days by default, for Windows 2000 the default is
30 days instead.
For NT workstation, if you add a new registry entry of
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetLogon\Parameters
Add Value name MaximumPasswordAge as a type REG_DWORD. The default is 7 and
the range is 1 to 1,000,000. You can also disable the password change if you
Add Value name DisablePasswordChange, also a REG_DWORD, and set it to 1.
Unfortunately I don't know if a similar registry entry exists for Windows
2000 or if the same one would work - haven't tested it.
How I got that lab to work was by doing the following:
a. Use Ghost to dump a pre-configured image onto the workstation (the image
was made just before joining the workstation on the domain)
b. Run Ghostwalker to change the machine SID (not necessary when using
Samba) and also change the netbios name of the machine!
c. On the Samba server reset the password for the specific machine account
d. Join the domain manually
On a much larger installation (300+ workstations) we used to do an
unattended install of Windows NT and there was a home-grown utility that was
used to join the machines to the domain controlled by an NT PDC. I don't
recall what that utility was called right now, I 'll see tonight if I have
got a copy of it though (its been a fairly long time since I did that).
If you find out more creative ways of achieving the end result please let me
know.
HTH,
Cheers,
Makis.
-----Original Message-----
From: samba-admin at lists.samba.org [mailto:samba-admin at lists.samba.org]On
Behalf Of Michael L Torrie
Sent: Friday, 15 June 2001 4:08 AM
To: samba at lists.samba.org
Subject: Using disk cloning software and samba pdc
I'm not sure how to deal with this in a normal win2k network, but we
usually clone all of our machines off of an "image" computer. Does anyone
have any procedures for making image work with a samba pdc network? It
would be a total pain to manually add 100 machines to a pdc (I am using a
samba-tng/samba dual-head server, so this applies to samba-tng too).
The solution I've come up with is to use the image's machine account to
create all the machine accounts (they will all have the same password,
though). This would basically create a machine account for each computer
in an already joined state. Security aside, is this a workable solution?
What is a better one?
Too bad win2k doesn't have better commandline tools or I could write a
startup script to take care of this kind of thing. Does anyone know how
to set the machine name in windows 2000 without going to the control panel
or right-clicking on "My computer"? Basically I also need to have each
machine get it's host name from DCHP. (This is opposite of MS's dynamic
DNS updates).
thanks,
Michael
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <Makis.Marmaridis at learnnow.com.au>
Delivered-To: samba at lists.samba.org
Received: from exchange.angusknight.com.au (unknown [203.111.32.252]) by
lists.samba.org (Postfix) with ESMTP id 3F5225219 for
<samba at lists.samba.org>; Fri, 15 Jun 2001 00:24:59 -0700 (PDT)
Received: from akln01 (203.111.32.252 [203.111.32.252]) by
exchange.angusknight.com.au with SMTP (Microsoft Exchange Internet
Mail Service Version 5.5.2653.13) id ML48YL0C; Fri, 15 Jun 2001
17:27:45 +1000
From: "Makis Marmaridis" <Makis.Marmaridis at learnnow.com.au>
To: <torriem at cs.byu.edu>
Cc: <samba at lists.samba.org>
Subject: RE: Using disk cloning software and samba pdc
Date: Fri, 15 Jun 2001 17:30:23 +1000
Message-ID: <000101c0f56d$0a784b30$943c0a0a at akln01>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi again Michael,
I just remembered :-) that utility I was talking about in my previous email
was really a c++ wrapper that was using netdom.
I also found this link
http://support.microsoft.com/support/kb/articles/Q260/5/75.ASP
it seems that netdom is still around with Win2K.
PS: Sorry list if this is getting a little off topic... :-)
HTH,
Cheers,
Makis.
-----Original Message-----
From: Makis Marmaridis [mailto:Makis.Marmaridis at learnnow.com.au]
Sent: Friday, 15 June 2001 5:22 PM
To:
Cc: 'samba at lists.samba.org'
Subject: RE: Using disk cloning software and samba pdc
Hi Michael,
a while back I had exactly the same dillemas, the only difference was I was
using Windows NT workstations.
If you image the machines after they have joined the domain and maintain the
password for their machine account on the PDC that should work (I tried it
on one machine and worked) what you have to keep in mind though is that this
password actually changes periodically!
For NT it changes every 7 days by default, for Windows 2000 the default is
30 days instead.
For NT workstation, if you add a new registry entry of
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetLogon\Parameters
Add Value name MaximumPasswordAge as a type REG_DWORD. The default is 7 and
the range is 1 to 1,000,000. You can also disable the password change if you
Add Value name DisablePasswordChange, also a REG_DWORD, and set it to 1.
Unfortunately I don't know if a similar registry entry exists for Windows
2000 or if the same one would work - haven't tested it.
How I got that lab to work was by doing the following:
a. Use Ghost to dump a pre-configured image onto the workstation (the image
was made just before joining the workstation on the domain)
b. Run Ghostwalker to change the machine SID (not necessary when using
Samba) and also change the netbios name of the machine!
c. On the Samba server reset the password for the specific machine account
d. Join the domain manually
On a much larger installation (300+ workstations) we used to do an
unattended install of Windows NT and there was a home-grown utility that was
used to join the machines to the domain controlled by an NT PDC. I don't
recall what that utility was called right now, I 'll see tonight if I have
got a copy of it though (its been a fairly long time since I did that).
If you find out more creative ways of achieving the end result please let me
know.
HTH,
Cheers,
Makis.
-----Original Message-----
From: samba-admin at lists.samba.org [mailto:samba-admin at lists.samba.org]On
Behalf Of Michael L Torrie
Sent: Friday, 15 June 2001 4:08 AM
To: samba at lists.samba.org
Subject: Using disk cloning software and samba pdc
I'm not sure how to deal with this in a normal win2k network, but we
usually clone all of our machines off of an "image" computer. Does anyone
have any procedures for making image work with a samba pdc network? It
would be a total pain to manually add 100 machines to a pdc (I am using a
samba-tng/samba dual-head server, so this applies to samba-tng too).
The solution I've come up with is to use the image's machine account to
create all the machine accounts (they will all have the same password,
though). This would basically create a machine account for each computer
in an already joined state. Security aside, is this a workable solution?
What is a better one?
Too bad win2k doesn't have better commandline tools or I could write a
startup script to take care of this kind of thing. Does anyone know how
to set the machine name in windows 2000 without going to the control panel
or right-clicking on "My computer"? Basically I also need to have each
machine get it's host name from DCHP. (This is opposite of MS's dynamic
DNS updates).
thanks,
Michael
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <carl at kul.equatorial.com>
Delivered-To: samba at samba.org
Received: from enterprise.hec.equatorial.com
(enterprise.hec.equatorial.com [202.187.160.8]) by lists.samba.org
(Postfix) with ESMTP id F283244B9 for <samba at samba.org>; Fri, 15 Jun
2001 01:19:54 -0700 (PDT)
Received: from inetsrvr.kul.equatorial.com
(IDENT:root at inetsrvr.kul.equatorial.com [192.168.101.8]) by
enterprise.hec.equatorial.com (8.11.3/8.11.3) with ESMTP id
f5F8UGA12187 for <samba at samba.org>; Fri, 15 Jun 2001 16:30:23 +0800
Received: from kul.equatorial.com (IDENT:carl at jupiter.kul.equatorial.com
[192.168.101.27]) by inetsrvr.kul.equatorial.com (8.9.3/8.9.3) with
ESMTP id NAA14038 for <samba at samba.org>; Fri, 15 Jun 2001 13:37:18
+0800
Message-ID: <3B29A053.4470B146 at kul.equatorial.com>
Date: Fri, 15 Jun 2001 13:42:43 +0800
From: "Carl C.H. Ng" <carl at kul.equatorial.com>
Organization: Hotel Equatorial Kuala Lumpur
X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.4.2-2 i586)
X-Accept-Language: en
MIME-Version: 1.0
To: samba <samba at samba.org>
Subject: How to Access printer service!
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi samba,
It's funny, that smbclient only allows you to transfer over then you can
print from the samba box to the connected LPT. What i'm looking for is
from a linux box printing across to a printer with samba connected on
LPT, is that possible?
Thanks yo'.
Carl
p/s samba is doing great. my thousand applause!
Return-Path: <ross22z at hotmail.com>
Delivered-To: samba at lists.samba.org
Received: from hotmail.com (f211.law14.hotmail.com [64.4.21.211]) by
lists.samba.org (Postfix) with ESMTP id B66FC53E3 for
<samba at lists.samba.org>; Fri, 15 Jun 2001 02:07:56 -0700 (PDT)
Received: from mail pickup service by hotmail.com with Microsoft
SMTPSVC; Fri, 15 Jun 2001 02:12:39 -0700
Received: from 141.154.123.214 by lw14fd.law14.hotmail.msn.com with
HTTP; Fri, 15 Jun 2001 09:12:38 GMT
X-Originating-IP: [141.154.123.214]
From: "hawersadf asdfwefffa" <ross22z at hotmail.com>
To: samba at lists.samba.org
Subject: Printer spool file names
Date: Fri, 15 Jun 2001 09:12:38 -0000
Mime-Version: 1.0
Content-Type: text/plain; format=flowed
Message-ID: <F211PufeduRGctyw0vF0001b272 at hotmail.com>
X-OriginalArrivalTime: 15 Jun 2001 09:12:39.0131 (UTC)
FILETIME=[53285AB0:01C0F57B]
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I recently upgraded to samba 2.2.0 on my linux 2.2.14 printer server. On my
old version on samba, the spool names seen both from what you get with an
lpq command and also what you see in windows seemed to be determined by the
application printing. MicrosoftWord-Document1 for example. Now, samba is
naming all the spool files smbprn.1, smbprn.2... I've looked around
everywhere, but I can't seem to find an answer. Any ideas?
-Ross
# Samba config file created using SWAT
# from 192.168.0.5 (192.168.0.5)
# Date: 2001/06/08 00:18:44
# Global parameters
[global]
workgroup = SKALIOTIS
server string = Printer Server
security = SHARE
encrypt passwords = Yes
map to guest = Bad User
null passwords = Yes
log level = 3
syslog = 0
log file = /var/log/samba/log.%m
max log size = 1000
timestamp logs = No
os level = 65
preferred master = Yes
domain master = Yes
wins support = Yes
guest account = printer
[printer]
comment = Printer
path = /var/spool/samba
read only = No
guest ok = Yes
print ok = Yes
print command = echo Printing %s >> /var/log/print.log; lpr -r -P%p
%s; rm %s
printer name = printer
lpq cache time = 0
printable = yes
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
Return-Path: <Girish.Purohit.EXT at ugs.com>
Delivered-To: samba at samba.org
Received: from stlntx2.ugsolutions.com (stlntx2.ugsolutions.com
[134.244.32.21]) by lists.samba.org (Postfix) with ESMTP id 00C0153F1
for <samba at samba.org>; Fri, 15 Jun 2001 02:39:21 -0700 (PDT)
Received: from cypntx.ugsolutions.com ([134.244.77.102]) by
stlntx2.ugsolutions.com with SMTP (Microsoft Exchange Internet Mail
Service Version 5.5.2650.21) id M61KHXK9; Fri, 15 Jun 2001 04:43:58
-0500
Received: by cypntx.ugsolutions.com with Internet Mail Service
(5.5.2650.21) id <MZQHPCMD>; Fri, 15 Jun 2001 02:43:57 -0700
Message-ID: <9DBD698C2310D51199E00090278A071B013421C9 at cypntx1.ugsolution
s.com>
From: "Purohit (EXT), Girish" <Girish.Purohit.EXT at ugs.com>
To: samba at samba.org
Subject: Need information
Date: Fri, 15 Jun 2001 02:43:50 -0700
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2650.21)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi Samba Team,
We are using samba 2.0.4 on HP-UX 10.2B and it has been very
useful for our project.
Until now we were using NT 4.x clients.But recently we are migrated to
Win2000 clients.So can you
please suggest which Version of Samba we can use on HP-UX 10.2B for Win2000
clients.
We are still able to Map unix drive on Win2000 client .But can not
access it directly in network places in Win200 as we used to do using
Network Neighbourhood on WinNT 4.0
Please Can you help us.
Reagrds,
Girish Purohit
Solid Edge - Pune Development Center
Tata Consultancy Services ,
1,Mangaldas Road,
Pune - 411001
INDIA
______________________________________
* +91-20-612 2809 (Ext. 229)
* x_purohi at ugs.com
gmpurohit at pune.tcs.co.in
Return-Path: <abartlet at pcug.org.au>
Delivered-To: samba at samba.org
Received: from dnscache.cbr.au.asiaonline.net
(dnscache.cbr.au.asiaonline.net [210.215.8.100]) by lists.samba.org
(Postfix) with ESMTP id 7DDB9540B for <samba at samba.org>; Fri, 15 Jun
2001 02:58:26 -0700 (PDT)
Received: from piglett.bartlett.house (as2-11.cbr.au.asiaonline.net
[210.215.10.11]) by dnscache.cbr.au.asiaonline.net (8.10.2/8.10.2)
with ESMTP id f5FA2wI11517; Fri, 15 Jun 2001 20:02:59 +1000 (EST)
Received: from yowiee.bartlett.house (IDENT:root at yowiee.bartlett.house
[192.168.1.99]) by piglett.bartlett.house (8.9.3/8.8.7) with ESMTP id
UAA23571; Fri, 15 Jun 2001 20:02:34 +1000
Received: from bartlett.house (IDENT:abartlet at piglett.bartlett.house
[192.168.1.1]) by yowiee.bartlett.house (8.9.3/8.8.7) with ESMTP id
UAA27019; Fri, 15 Jun 2001 20:02:34 +1000
Message-ID: <3B29DD3A.9C13F27A at bartlett.house>
Date: Fri, 15 Jun 2001 20:02:34 +1000
From: Andrew Bartlett <abartlet at pcug.org.au>
X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.19-6.2.1 i686)
X-Accept-Language: en
MIME-Version: 1.0
To: Bharani Subramanian <bharanis at ssi-technologies.com>
Cc: samba at samba.org
Subject: Re: Text files
References: <CEDCC58BE65CD511985D00A0C9C8532F2460B6 at MADRAS>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Bharani Subramanian wrote:
>
> Hi,
> i have successfully installed the samba server in our environment. but i
> have problems with text fiels. is there an option like "Text" mode transfer
> available.please help
NO. The protocol does not allow text/binary selection, and samba does
not alter the contents of the files it serves.
Andrew Bartlett
--
Andrew Bartlett
abartlet at pcug.org.au
Return-Path: <urban at teststation.com>
Delivered-To: samba at samba.org
Received: from fungus.teststation.com (fungus.teststation.com
[212.32.186.211]) by lists.samba.org (Postfix) with ESMTP id B6D274574
for <samba at samba.org>; Fri, 15 Jun 2001 04:19:12 -0700 (PDT)
Received: from cola.teststation.com (tron.teststation.com
[212.32.186.212]) by fungus.teststation.com (8.11.2/8.11.2) with ESMTP
id f5FBNT016101; Fri, 15 Jun 2001 13:23:30 +0200
Date: Fri, 15 Jun 2001 13:23:27 +0200 (CEST)
From: Urban Widmark <urban at teststation.com>
X-Sender: <puw at cola.teststation.com>
To: Jason Bechtel <jason at uniqsys.com>
Cc: <samba at samba.org>
Subject: Re: smbmount from Linux to an AS/400
In-Reply-To: <3B291F08.96E7641A at uniqsys.com>
Message-ID: <Pine.LNX.4.30.0106151308440.20771-100000 at cola.teststation.c
om>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Thu, 14 Jun 2001, Jason Bechtel wrote:
> I have a Linux server trying to mount an SMB share from an IBM AS/400
> machine running OS/400 version 4.3 or better (not my machine, but the
> owner says so). It works, but not completely. One can do 'smbclient -U
> username -L ipaddress' and specify a valid username and password and
smbclient is different from smbmount ...
> display the list of shares. One can do 'smbclient -U username
> \\\\ipaddress\\sharename' and gain access to the share, but when listing
> the contents of the directory, only the first letter of each filesystem
> object is visible!
... but I think the problem is the same.
Someone reported this to me some time ago on smbmount/smbfs and sent me a
tcpdump of a dirlisting attempt. The reason only the first letter was
shown was that the AS/400 server returns data in unicode format even when
the negotiated format is plain ASCII.
"myfile" becomes "m\0y\0f\0i\0l\0e\0", so the string code stops reading
after the m.
The cvs HEAD branch of samba talks unicode on the wire, and may work
better (does 2.2.0 also do that?). I'd try the cvs version, compile it but
install it without overwriting my normal samba install or simply run
smbclient from the source/bin/ directory.
Future smbfs versions will support unicode as well, in case your reference
to smbmount wasn't just a typo. I have a patch for some 2.4.x linux kernel
that sort of works ... sometimes. :)
> I have not done extensive testing to verify the depth of the problem,
> but this is obviously a slight problem with the implementation of
> SMB/CIFS on the AS/400. IBM sells its proprietary Windows client
> software, which allows Windows machines to map these shares in Network
> Neighborhood, so it must be possible...
Do you require that special windows client to talk to the server ?
If you do, then perhaps they are doing something strange.
/Urban
Return-Path: <bwells at alabanza.com>
Delivered-To: samba at lists.samba.org
Received: from mail.valinux.com (mail.valinux.com [198.186.202.175]) by
lists.samba.org (Postfix) with ESMTP id 87BDC543D for
<samba at lists.samba.org>; Fri, 15 Jun 2001 04:52:38 -0700 (PDT)
Received: from c9ivc.alabanza.com ([208.56.0.33] helo=C9IVC) by
mail.valinux.com with asmtp (Cipher TLSv1:RC4-MD5:128) (Exim 3.22 #1
(Debian)) id 15AsAL-00045r-00 for <samba at lists.samba.org>; Fri, 15 Jun
2001 04:53:29 -0700
From: "Brent Wells" <bwells at alabanza.com>
To: <samba at lists.samba.org>
Subject: Login from Linux to NT
Date: Fri, 15 Jun 2001 07:55:14 -0400
Message-ID: <NDBBJFJPCLADLHPLEBIMCELODIAA.bwells at alabanza.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2911.0)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hello everyone, I have a quick question. Anyone know of a way to allow
users to automatically login, from linux, to an NT server once they enter
there username and password. I have attempted to do this, but since you
must mount a drive as root a .bashrc entry will not work. Can someone
please point me in a good direction so that I cam accomplish this. Is there
any scripts on the net that will allow this sort of functionality. Thanks
and have a nice day!
Sincerely,
Brent
Return-Path: <abartlet at pcug.org.au>
Delivered-To: samba at lists.samba.org
Received: from dnscache.cbr.au.asiaonline.net
(dnscache.cbr.au.asiaonline.net [210.215.8.100]) by lists.samba.org
(Postfix) with ESMTP id 82DA9442A for <samba at lists.samba.org>; Fri, 15
Jun 2001 05:08:23 -0700 (PDT)
Received: from piglett.bartlett.house (as2-143.cbr.au.asiaonline.net
[210.215.10.143]) by dnscache.cbr.au.asiaonline.net (8.10.2/8.10.2)
with ESMTP id f5FCCsI23975; Fri, 15 Jun 2001 22:12:54 +1000 (EST)
Received: from yowiee.bartlett.house (IDENT:root at yowiee.bartlett.house
[192.168.1.99]) by piglett.bartlett.house (8.9.3/8.8.7) with ESMTP id
WAA24163; Fri, 15 Jun 2001 22:12:27 +1000
Received: from bartlett.house (IDENT:abartlet at piglett.bartlett.house
[192.168.1.1]) by yowiee.bartlett.house (8.9.3/8.8.7) with ESMTP id
WAA27384; Fri, 15 Jun 2001 22:12:27 +1000
Message-ID: <3B29FBAA.BB4094DF at bartlett.house>
Date: Fri, 15 Jun 2001 22:12:26 +1000
From: Andrew Bartlett <abartlet at pcug.org.au>
X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.19-6.2.1 i686)
X-Accept-Language: en
MIME-Version: 1.0
To: Brent Wells <bwells at alabanza.com>
Cc: samba at lists.samba.org
Subject: Re: Login from Linux to NT
References: <NDBBJFJPCLADLHPLEBIMCELODIAA.bwells at alabanza.com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Brent Wells wrote:
>
> Hello everyone, I have a quick question. Anyone know of a way to allow
> users to automatically login, from linux, to an NT server once they enter
> there username and password. I have attempted to do this, but since you
> must mount a drive as root a .bashrc entry will not work. Can someone
> please point me in a good direction so that I cam accomplish this. Is there
> any scripts on the net that will allow this sort of functionality. Thanks
> and have a nice day!
>
You could look into the pam_mount module (I looked at it but not yet
used it) as it is designed to do this kind of thing. I am intending
(unless sombody beats me too it) implement it as part of the winbind PAM
module when I get a chance.
You could also look at pam_pwexport, which apparently had similar (if
more generic) goals.
Andrew Bartlett
abartlet at pcug.org.au
--
Andrew Bartlett
abartlet at pcug.org.au
Return-Path: <andrewmc at celt.dias.ie>
Delivered-To: samba at lists.samba.org
Received: from dana.celt.dias.ie (dana.celt.dias.ie [160.6.9.100]) by
lists.samba.org (Postfix) with SMTP id 63A4249A8 for
<samba at lists.samba.org>; Fri, 15 Jun 2001 05:41:40 -0700 (PDT)
Received: (qmail 3883 invoked by uid 5004); 15 Jun 2001 12:46:20 -0000
Received: from andrewmc at celt.dias.ie by dana.celt.dias.ie with
scan4virus-0.19 (. Clean. Processed in 1.55319 secs); 15/06/2001
13:46:18
Received: from caoilte.celt.dias.ie (HELO caoilte2.celt.dias.ie)
(160.6.9.11) by dana.celt.dias.ie with SMTP; 15 Jun 2001 12:46:18
-0000
Received: (qmail 27834 invoked by uid 279); 15 Jun 2001 12:46:17 -0000
Date: Fri, 15 Jun 2001 13:46:17 +0100
From: Andrew McCarthy <andrewmc-samba at celt.dias.ie>
To: samba at lists.samba.org
Subject: blocking locks = no: safe?
Message-ID: <20010615134616.E26704 at celt.dias.ie>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.5i
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi folks,
I've just moved over from NT4 to Samba, and have just one small question.
We have (multi-user) software that seems to be looking for locks (suggested by
debug level 3 messages). At each attempt (on startup, and on updating
records), it pauses for 20 seconds, which it didn't under NT. Setting
blocking locks = no
cut out the delay, and it's back up to full speed.
My question is, is this a safe option to use? I get the impression that it is,
but I'm not too familiar with NT's locking and need some reassurance before
trusting our data to it.
Thanks!
Andrew
Return-Path: <phil.hardern at bt.com>
Delivered-To: samba at lists.samba.org
Received: from gollum.axion.bt.co.uk (gollum.axion.bt.co.uk
[132.146.17.41]) by lists.samba.org (Postfix) with ESMTP id E16B0463C
for <samba at lists.samba.org>; Fri, 15 Jun 2001 05:53:30 -0700 (PDT)
Received: from cclmsent02.lon.bt.com by gollum (local) with ESMTP; Fri,
15 Jun 2001 13:58:10 +0100
Received: by cclmsent02.lon.bt.com with Internet Mail Service
(5.5.2652.35) id <L219N50K>; Fri, 15 Jun 2001 13:57:55 +0100
Message-ID: <851244722352D21180550000F8EFA23C040800E4 at melds1nt01.nor.bt.
com>
From: phil.hardern at bt.com
To: samba at lists.samba.org
Subject: Problem running ./configure on a HP-UX 11.0 system.
Date: Fri, 15 Jun 2001 13:58:01 +0100
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2652.35)
Content-Type: text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I am getting the following message when running the ./configure
script on a HP-UX 11.0 system.
checking configure summary
WARNING: No automated network interface determination
ERROR: no seteuid method available
Any pointers would be very welcome.
Thanks
Phil Hardern
phil.hardern at bt.com
Return-Path: <cwindsor at gsu.edu>
Delivered-To: samba at lists.samba.org
Received: from panther.Gsu.EDU (panther.gsu.edu [131.96.5.77]) by
lists.samba.org (Postfix) with ESMTP id 3DBE85466 for
<samba at lists.samba.org>; Fri, 15 Jun 2001 05:54:11 -0700 (PDT)
Received: from michael.phy-astr.gsu.edu
(IDENT:d20k3 at Michael.Phy-Astr.Gsu.EDU [131.96.4.10]) by
panther.Gsu.EDU (8.9.3/8.7.3) with ESMTP id IAA29749; Fri, 15 Jun 2001
08:58:45 -0400 (EDT)
From: cwindsor at gsu.edu
Date: Fri, 15 Jun 2001 08:58:44 -0400 (EDT)
X-Sender: d20k3 at localhost.localdomain
To: Robert Steinmetz <rob at steinmetznet.com>
Cc: Samba <samba at lists.samba.org>
Subject: Re: cannot Create Windows 98 Client Shares.
In-Reply-To: <3B29221B.8A6198B3 at steinmetznet.com>
Message-ID: <Pine.LNX.4.21.0106150848110.12480-100000 at localhost.localdom
ain>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Thu, 14 Jun 2001, Robert Steinmetz wrote:
> I am running Samba 2.2.x I cannot seem to view the list of users when
> creating a shared directory on Win98 with user level security when I
> am logged on to a Win-NT domain. I get and error message "You cannot
> view the list of users at this time. Please try again later." All users
> are in smbpasswd and can log into the domain. I have found this problem
> mentioned twice in the mailing list archives with no solution Offered. I
> am sure I'm overlooking something simple.
>
> If anyone has this working I would appreciate a post to this list just
> so I know it will work.
>
> The server is Solaris 2.6 x86 Samba is 2.2.0 compiled with gcc using all
> defaults. File sharing, domain logins and printing are working file. I
> am unable to get Shares for Windows 98 Clients to work correctly.
>
> Here are the relevant (I hope) portions of my smb.conf file.
>
> ;
> ; Primary Domain Controller
> ;
> netbios name = LUCRETIA
> workgroup = ATLANTA
> os level = 65
> preferred master = yes
> domain master = yes
> local master = yes
> ;
> ; Security
> ;
> security = user
> encrypt passwords = yes
> ;
> ; Domain Logons
> ;
> domain logons = yes
> domain admin users = rob
> logon path = \\LUCRETIA\profiles\%u
> logon drive = U:
> logon home = \\LUCRETIA\%u
> logon script = %u.bat
> ;
> ; Shares for Domain Control
> ;
> [netlogon]
> path = /usr/local/samba/netlogon
> writable = no
> write list = root
> ;shares for storing user profiles
> [profiles]
> path = /usr/local/samba/profiles
> writable = yes
> create mask = 0600
> sdirectory mask = 0700
>
> --
> Robert Steinmetz, AIA
> Principal
> Steinmetz & Associates
> New Orleans Atlanta
>
-----
I have 150 workstations, Redhat and Win98. I have Samba 2.2.0 on
Redhat 7.1, doing NT Doamin logins/authentication and displaying
the user list when creating Win98 shares. It seems to work.
I first had the problem that I could either get the PDC working
but not the user list, or the user list but not the PDC. I found
some Win 98 boxes up with a workgroup name the same as the hostname
and netbios name of the samba box. Somehow this confused samba.
I doubt that you have a Win box with a workgroup name of LUCRETIA,
but perhaps this is verification that it can work.
-Duke
--
Charles C. Windsor | ph: 404-651-2279
Georgia State University | fax: 404-651-1427
Physics & Astronomy | email: cwindsor at gsu.edu
Return-Path: <murugappan at hgsolutions.com>
Delivered-To: samba at samba.org
Received: from host2.ecsecure.com (host2.ecsecure.com [209.239.38.173])
by lists.samba.org (Postfix) with ESMTP id B662A442C for
<samba at samba.org>; Fri, 15 Jun 2001 06:04:01 -0700 (PDT)
Received: from hg04 ([64.64.109.149]) by host2.ecsecure.com
(8.10.2/8.10.2) with SMTP id f5FD8dS25578; Fri, 15 Jun 2001 09:08:39
-0400
Message-ID: <00d101c0f5a4$4a30d5d0$956d4040 at hg04>
From: "Murugappan" <murugappan at hgsolutions.com>
To: <samba at samba.org>
Cc: "Andrew Lyon" <Administrator at josims.com>
References: <C2ADBF38E1F4D3118F9F0060082151A501F684 at CORE>
Subject: Re: samba help pls
Date: Fri, 15 Jun 2001 09:05:52 -0500
Organization: Hourglass Solutions Inc.
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4522.1200
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
but when i do rpm -qa | grep -i samba
it lists like this
samba -client 2.0.x
samba -2.0.x
samba -common 2.0.x
it doesn't list samba 2.2.0 why??
now that I can remove samba 2.0.x by saying rpm -e <package> .
my samba 2.0.x lies in etc/samba directory
my samba 2.2 lies in usr/local/bin directory..
can u help me in saying whats the procedure to completely remove all samba
compnents and install samba 2.2.0 so that when i do
rpm -q samba it lists samba 2.2.0
P.Murugappan
----- Original Message -----
From: "Andrew Lyon" <Administrator at josims.com>
To: "'Murugappan'" <murugappan at hgsolutions.com>
Sent: Friday, June 15, 2001 5:19 AM
Subject: RE: samba help pls
> do rpm -qa | grep -i samba to get all the names of samba packages
installed
> then do rpm -e <package> for each one
>
> atd = at daemon, kinda like cron i believe, wouldnt worry about it unless
> you're using it.
>
> Andy
>
> -----Original Message-----
> From: Murugappan [mailto:murugappan at hgsolutions.com]
> Sent: 15 June 2001 01:26
> To: prea at uninsubria.it; samba at samba.org
> Subject: Re: samba help pls
>
>
> Hello
> A basic question
> I installed samba 2.2 version . But already samba 2.0.7 version is
> installed. If i do rpm -q samba it points to 2.0.7 version. How to
uninstall
> samba 2.0.7 on my server or point samba 2.2 as my default.
>
> 1 more question..... when my linux OS boots
> it says
> starting atd -----FAILED..
> whats this panic..
>
> P.Murugappan
>
>
>
> ----- Original Message -----
> From: "Damiano G. Preatoni" <prea at uninsubria.it>
> To: "Murugappan" <murugappan at hgsolutions.com>; <samba at samba.org>
> Sent: Thursday, June 14, 2001 2:40 PM
> Subject: Re: samba help pls
>
>
> > On 14 Jun 2001, at 10:08, Murugappan wrote:
> >
> > >
> > > I have some NT machines and recently purchased a HP NET server. Just
> installed
> > > Redhat Linux 7.1. I am planning to make my Linux machine as my
PDC,File
> > > server,Print srever etc..so that usernames and passwords are
> authenticated by
> > > the Linux server.
> >
> > Nice idea!
> > It's two years I have set up a Compaq ProLiant 1600 dual-PIII as a
> > workgroup server, using RH 6.2 and samba 2.0.7 (a BIG thank to
> > David Bannon!!!)
> >
> > > Here in second statement I don't have a bin directory at all under my
> > > etc/samba.but blindly I have followed the steps. Is this right.
> > ^^^^^^^^^^^^^
> >
> > Please, you're on a *nix system.
> > It's assumed you're aware of what you're doing.
> >
> > Use the samba 2.0.7 rpm, and everything will be in place.
> > David's setup is slightly different, but don't worry.
> >
> > After installing the RPM, the only thing you should need is ti edit
> > /etc/smb.conf
> >
> >
> > > status = yes
> > never seen such a line in smb.conf. Remove it.
> >
> > > workgroup = MYDOMAIN (*)
> > here goes your shiny brand new domain name. Mine is UAGB, that
> > is the acronym of the research unit where I work.
> >
> > > wins server = 123.45.67.89 (*)
> > remove this also, here goes the IP address of your WINS server (if
> > you have any)
> >
> > > encrypt passwords = yes
> > > domain logons =yes
> > > domain admin group = @adm
> > > guest account = ftp
> > > share modes=no
> > > os level=65
> >
> > So far, so good. These are fine.
> >
> > > [homes]
> > > guest ok = no
> > > read only = no
> > > create mask = 0700
> > > directory mask = 0700
> > > oplocks = false
> > > locking = no
> > OK!
> >
> > > [netlogon]
> > > path = /etc/samba/netlogon
> > > writeable = no
> > > guest ok = no
> > >
> > > Here is the wins server is my Primary DNS server.
> > strange address, you WINS server... IS really 123.45.67.89??? are
> > you on a VPN?
> >
> > >
> > > ---------------3) Then started samba by saying samba start.
> > > there are 2 processes running smbd and nmbd.
> > Right.
> > say ps -aux | grep samba and you should see them
> >
> >
> > > ------------4)Next I followed these steps to set up NT clients
> > >
> > > touch /etc/samba/private/smbpasswd
> > the RPM installs under /etc/smbpasswd
> >
> > > chmod go-rwx /etc/samba/private/smbpasswd
> > No! chmod 0600 and chown root.root
> >
> > > at this stage too I am not sure whats going around...
> > :) Hold on!
> > >
> > > ----------------5) At step 5 the document says the following.
> > >
> > > Now add an NT machine account,
> >
> > Here 's the trick:
> > AS ROOT:
> > you have to create once and forever a group called "workstations"
> > (or anything you like, but calling the group which contains all the
> > workstations "workstations" is nice)
> >
> > groupadd workstations
> >
> > then create the unix machine accounts: assume I have machine1
> > and machine2
> >
> > adduser -g workstations -c 'Workstation number one' -d /dev/null -s
> > /bin/false -n machine1$
> >
> > adduser -g workstations -c 'Workstation number two' -d /dev/null -s
> > /bin/false -n machine2$
> >
> > you said: create an user account belonging to the "workstations"
> > group, comment out this username in /etc/passwd with
> > "Workstation number one", let the user home directory be the
> > empty (/dev/null) and the preferred unix shell be the void
> > (/bin/false). Ah, I was forgetting that this user calls machine1$
> >
> > Now go for the samba part: say
> > smbpasswd -a -m machine1
> >
> > and you enter in /etc/smbpasswd a machibe account (the $ is
> > unnecessary here)
> >
> > Now restart samba, have a cup of coffee and sit in front of a NT
> > machine (say, machine1)
> >
> > - log on as Administrator (the "domain" row of login screen, if
> > present, should read the machine name!)
> >
> > - go to control panel /network, click Change
> > -modify the machine name accordingly (this was machine1, isn't it?)
> > -choose to join a DOMAIN, and instead of DOMAIN, write your
> > domain name (what you wrote at the "workgroup" clause in
> > /etc/smb.conf?)
> > -don't check "create a machine account" it doesn't helps, that job
> > is what you just finished to do on unix before.
> >
> > -you should see after a while the infamous "Welcome to the <your
> > name here> domain"
> >
> > You're done!!
> >
> > HTH
> >
> >
> >
> >
> > =========================================================
> > Damiano G. Preatoni
> > Dept. of Structural and Functional Biology
> > Faculty of Sciences - University of Insubria
> > Via J. H. Dunant, 3 - 21100 Varese - Italy
> > ph. +39 0332 421 538; fax +39 0332 421554
> > http://fauna.dipbsf.uninsubria.it/
> > ICQ #78690321
> > Odigo #2645129
> > =========================================================
> > "Advice is a dangerous gift.
> > Even from the wise to the wise.
> > For all courses may run ill."
> > J.R.R. Tolkien,
> > The Lord of the Rings
> >
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
>
>
> ************************************************************
> Registered Office:
> J.O. Sims Ltd
> Pudding Lane
> Pinchbeck
> Spalding
> Lincs
> PE11 3TJ
> Company reg No: 2084187 Vat reg No: GB 437 4621 47
> Tel: +44 (0) 1775 842100
> Fax: +44 (0) 1775 842101
> Web: www.josims.com
> Email: enquiries at josims.com
>
> ************************************************************
> The information contained in this e-mail is confidential
> and is intended for the addressee only. The contents of
> this e-mail must not be disclosed or copied without the
> sender's consent. If you are not the intended recipient of
> the message, please notify the sender immediately, and
> delete the message.
>
> The statements and opinions expressed in this message are
> those of the author and do not necessarily reflect those
> of the company. No commitment may be inferred from the
> contents unless explicitly stated. The company does not
> take any responsibility for the personal views of the
> author.
>
> This message has been scanned for viruses before sending,
> but the company does not accept any responsibility for
> infection and recommends that you scan any attachments.
> ************************************************************
>
Return-Path: <kill-9 at warbeast.com>
Delivered-To: samba at lists.samba.org
Received: from elektra.warbeast.com (unknown [63.106.52.242]) by
lists.samba.org (Postfix) with ESMTP id C5158422E for
<samba at lists.samba.org>; Fri, 15 Jun 2001 06:35:47 -0700 (PDT)
Received: from elektra.warbeast.com (IDENT:kill-9 at warbeast.com
[63.106.52.242]) by elektra.warbeast.com (8.9.3/8.9.1) with SMTP id
JAA05290; Fri, 15 Jun 2001 09:40:28 -0400
Date: Fri, 15 Jun 2001 09:40:28 -0400 (EDT)
From: kill -9 <kill-9 at warbeast.com>
To: "Sean P. Elble" <S_Elble at yahoo.com>
Cc: samba at lists.samba.org
Subject: Re: What can ACL do?
In-Reply-To: <007501c0f506$81427900$0600a8c0 at gateway>
Message-ID: <Pine.LNX.3.95.1010615093753.5221G-100000 at elektra.warbeast.c
om>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
More information about the samba
mailing list