No subject
Mon Dec 1 11:34:25 GMT 2003
Edit the file called src/EDITME and put the result in a file called
Local/Makefile.
Then you may proceed ... and next time ... you post an error message you
may want to be specific ... not "or something like that" ...
On Mon, 21 May 2001, Mager Charles WB wrote:
> Again another email ALMOST off the point, but not quite. The first question,
> which is to do with samba, is - How can I make samba load on the bootup of
> the server in RedHat 7.0?
>
> The second is that I have downloaded exim for use as an email server as it
> was recommended by someone (mainly because it is completely free!). When I
> try to make the config file before installing it (ie just typing "make"), it
> says "command: make: not found" or something like that - what am I missing?
>
> --
> C.S.Mager
> charlie at csmager.co.uk
>
>
> This email and the information that it contains may be confidential,
> legally privileged and protected by law. Access by the intended
> recipient only is authorised. Any liability (in negligence or otherwise)
> arising from any third party acting, or refraining from acting, on any
> information contained in this email is hereby excluded. If you are
> not the intended recipient, please notify the sender immediately
> and do not disclose the contents to any other person, use it for
> any purpose, or store or copy the informationin any medium.
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
>
>
Return-Path: <D.M.Temple at lboro.ac.uk>
Delivered-To: samba at lists.samba.org
Received: from mailer1.lut.ac.uk (mailer1.lut.ac.uk [158.125.1.202]) by
lists.samba.org (Postfix) with ESMTP id 00EB24D1F; Mon, 21 May 2001
08:21:27 -0700 (PDT)
Received: from ccdmt by mailer1.lut.ac.uk with local (Exim 2.10 #1) id
151rVl-00053F-00; Mon, 21 May 2001 16:22:21 +0100
From: "Dave Temple" <D.M.Temple at lboro.ac.uk>
Message-Id: <1010521162221.ZM19419 at mailer1>
Date: Mon, 21 May 2001 16:22:21 +0100
In-Reply-To: R.J.Mckeating at lboro.ac.uk "Re: Email 2 & Others..." (May
21, 4:04pm)
References: <293BE1A6609BD411AEC300A0C9FC055E74933F at EMAILSRV>
<990457453.3b092e6d7e559 at staff-webmail.lboro.ac.uk>
X-Mailer: Z-Mail (5.0.0 30July97)
To: R.J.Mckeating at lboro.ac.uk, Mager Charles WB <9Mager at uppingham.co.uk>
Subject: Re: Email 2 & Others...
Cc: "Samba (E-mail)" <samba at lists.samba.org>, "SNTDom (E-mail)"
<samba-ntdom at lists.samba.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
X-Lboro-Filtered: mailer1.lut.ac.uk, Mon, 21 May 2001 16:22:21 +0100
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On May 21, 4:04pm, R.J.Mckeating at lboro.ac.uk wrote:
> >
> > The second is that I have downloaded exim for use as an email server as
> > it
> > was recommended by someone (mainly because it is completely free!). When
> > I
> > try to make the config file before installing it (ie just typing
> > "make"), it
> > says "command: make: not found" or something like that - what am I
> > missing?
> If you are in as root then /usr/bin is not in your path, use /usr/bin/make
>
> or failing that use locate make to find out where your copy is.
>
You might of course have not chosen to install "make" on your machine in the
first place, but I would have thought that that would make it difficult for you
to install Samba (unless you just use the RPM versions). When building Exim you
also need to remember to create the "Local" directory, then copy over and edit
the config files that it needs into this directory (all this is in the README
file that comes with Exim). Exim is very fast, and easy to configure (if you
are used to something nasty like Sendmail!). Check out :-
http://www.exim.org
There is a mailing list (with Web archive), as well as all the documentation
online. There will also be an Exim course in Cambridge in a couple of months
time. I wen on one of these a couple of years back and it was very good, and
they only run them at a cost recovery basis so they are not that costly.
Return-Path: <Gary at EdisonInfo.com>
Delivered-To: samba at lists.samba.org
Received: from smtp.edisoninfo.com (dhcp024-166-123-229.neo.rr.com
[24.166.123.229]) by lists.samba.org (Postfix) with SMTP id 9C6AA4CC6
for <samba at lists.samba.org>; Mon, 21 May 2001 08:48:50 -0700 (PDT)
Received: (qmail 10220 invoked from network); 21 May 2001 15:49:45 -0000
Received: from ws1.edisoninfo.com (HELO EdisonInfo.com) (192.168.0.5) by
smtp.edisoninfo.com with SMTP; 21 May 2001 15:49:45 -0000
Message-ID: <3B093907.991ADAE5 at EdisonInfo.com>
Date: Mon, 21 May 2001 11:49:27 -0400
From: Gary MacKay <Gary at EdisonInfo.com>
X-Mailer: Mozilla 4.77 [en] (WinNT; U)
X-Accept-Language: en
MIME-Version: 1.0
To: Mager Charles WB <9Mager at uppingham.co.uk>
Cc: "Samba (E-mail)" <samba at lists.samba.org>, "SNTDom (E-mail)"
<samba-ntdom at lists.samba.org>
Subject: Re: Email 2 & Others...
References: <293BE1A6609BD411AEC300A0C9FC055E74933F at EMAILSRV>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
as root, run the setup command, select 'system services', then put mark
in the samba line.
Mager Charles WB wrote:
>
> Again another email ALMOST off the point, but not quite. The first question,
> which is to do with samba, is - How can I make samba load on the bootup of
> the server in RedHat 7.0?
>
> The second is that I have downloaded exim for use as an email server as it
> was recommended by someone (mainly because it is completely free!). When I
> try to make the config file before installing it (ie just typing "make"), it
> says "command: make: not found" or something like that - what am I missing?
>
> --
> C.S.Mager
> charlie at csmager.co.uk
>
> This email and the information that it contains may be confidential,
> legally privileged and protected by law. Access by the intended
> recipient only is authorised. Any liability (in negligence or otherwise)
> arising from any third party acting, or refraining from acting, on any
> information contained in this email is hereby excluded. If you are
> not the intended recipient, please notify the sender immediately
> and do not disclose the contents to any other person, use it for
Return-Path: <whiplash at pobox.com>
Delivered-To: samba at lists.samba.org
Received: from gordons (unknown [134.6.58.70]) by lists.samba.org
(Postfix) with ESMTP id C192C4D08 for <samba at lists.samba.org>; Mon, 21
May 2001 08:49:07 -0700 (PDT)
Received: from [127.0.0.1] by gordons (ArGoSoft Mail Server, Version
1.61 (1.6.1.8)); Mon, 21 May 2001 09:48:43 -0600
Message-Id: <4.3.1.2.20010521094625.024b5870 at pop.nyx.net>
X-Sender: gcschuma at pop.nyx.net (Unverified)
X-Mailer: QUALCOMM Windows Eudora Version 4.3.1
Date: Mon, 21 May 2001 09:48:42 -0600
To: samba at lists.samba.org
From: Gordon Schumacher <whiplash at pobox.com>
Subject: Erm... anyone have any ideas?
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Can anyone offer any advice on this problem? I know that I didn't see this
on my previous Linux server, and I can't imagine what might have changed.
I recently installed Samba 2.2.0 on a SuSE 7 system with the 2.4.3
kernel. Under both the previous version (I believe it was 2.0.7, but I
won't swear to it) and 2.2.0, if I create a symlink to a directory within
the same share on the Linux box, it does not show up on Windows
clients. I've got "wide links" set explicitly to "yes", and have "follow
links" set explicitly to "yes" on all shares.
Any ideas what else I can try? My folder names pretty much all have spaces
in them, if that might be relevant.
Return-Path: <einhverfr at hotmail.com>
Delivered-To: samba at lists.samba.org
Received: from hotmail.com (f116.law9.hotmail.com [64.4.9.116]) by
lists.samba.org (Postfix) with ESMTP id EC3AD4CE2; Mon, 21 May 2001
08:53:13 -0700 (PDT)
Received: from mail pickup service by hotmail.com with Microsoft
SMTPSVC; Mon, 21 May 2001 08:54:08 -0700
Received: from 131.107.3.75 by lw9fd.law9.hotmail.msn.com with HTTP;
Mon, 21 May 2001 15:54:08 GMT
X-Originating-IP: [131.107.3.75]
From: "Christopher Travers" <einhverfr at hotmail.com>
To: kenny at hereintown.net, 9Mager at uppingham.co.uk
Cc: samba at lists.samba.org, samba-ntdom at lists.samba.org
Subject: Re: Email 2 & Others...
Date: Mon, 21 May 2001 08:54:08 -0700
Mime-Version: 1.0
Content-Type: text/plain; format=flowed
Message-ID: <F116ST7y6HYxNKZvEHA00005d34 at hotmail.com>
X-OriginalArrivalTime: 21 May 2001 15:54:08.0325 (UTC)
FILETIME=[451BE750:01C0E20E]
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi All,
Personal preference, but:
I would not place it in the rc.local because it will not give you any
fine-grained control over the starting of the service at various run-levels
(do you want SAMBA to start when you go into single-user mode for additional
maintanence?).
Rather I would place a link to the script in the /etc/rc.d/rc0.d through
rc5.d directories in order to control at which runlevels Samba will be
running.
With Sys V style init scripts, a script in these directories (where the
digit is equal to the run-level) will be activated with a 'stop' argument
when proceeded by a K and with the 'start' argument when proceeded with an
S. THey are run in the order that they are listed from the file system, so
S01SAMBA would be run before S99Samba. This also gives you control over the
order of activation of your services (making sure that, for example, any
ipchains rules are applied before you activate Samba, of you need to take
this precaution).
Runlevels at boot are controlled in the /etc/inittab.
Hope this helps.
Chris Travers
>From: Kenny <kenny at hereintown.net>
>To: Mager Charles WB <9Mager at uppingham.co.uk>
>CC: "Samba (E-mail)" <samba at lists.samba.org>, "SNTDom (E-mail)"
><samba-ntdom at lists.samba.org>
>Subject: Re: Email 2 & Others...
>Date: Mon, 21 May 2001 10:00:57 -0400 (EDT)
>
>I'd put the commands to start smbd and nmbd on boot in /etc/rc.d/rc.local
>...
>
>As far as exim goes ... you need to read first:
>
>From the exim README ...
>
>Edit the file called src/EDITME and put the result in a file called
>Local/Makefile.
>
>Then you may proceed ... and next time ... you post an error message you
>may want to be specific ... not "or something like that" ...
>
>On Mon, 21 May 2001, Mager Charles WB wrote:
>
> > Again another email ALMOST off the point, but not quite. The first
>question,
> > which is to do with samba, is - How can I make samba load on the bootup
>of
> > the server in RedHat 7.0?
> >
> > The second is that I have downloaded exim for use as an email server as
>it
> > was recommended by someone (mainly because it is completely free!). When
>I
> > try to make the config file before installing it (ie just typing
>"make"), it
> > says "command: make: not found" or something like that - what am I
>missing?
> >
> > --
> > C.S.Mager
> > charlie at csmager.co.uk
> >
> >
> > This email and the information that it contains may be confidential,
> > legally privileged and protected by law. Access by the intended
> > recipient only is authorised. Any liability (in negligence or otherwise)
> > arising from any third party acting, or refraining from acting, on any
> > information contained in this email is hereby excluded. If you are
> > not the intended recipient, please notify the sender immediately
> > and do not disclose the contents to any other person, use it for
> > any purpose, or store or copy the informationin any medium.
> > --
> > To unsubscribe from this list go to the following URL and read the
> > instructions: http://lists.samba.org/mailman/listinfo/samba
> >
> >
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
Return-Path: <jstewart at rtl.org>
Delivered-To: samba at lists.samba.org
Received: from webserver.rtl.org (webserver2.rtl.org [63.94.12.188]) by
lists.samba.org (Postfix) with ESMTP id BBC654DC0 for
<samba at lists.samba.org>; Mon, 21 May 2001 09:32:24 -0700 (PDT)
Received: from MIS3C.rtl.org ([63.106.163.130]) by webserver.rtl.org
(Switch-2.0.0/Switch-2.0.0) with ESMTP id f4LGacJ21799 for
<samba at lists.samba.org>; Mon, 21 May 2001 12:36:38 -0400
Message-Id: <5.0.2.1.0.20010521122724.00a94d50 at 63.94.12.188>
X-Sender: jstewart at 63.94.12.188
X-Mailer: QUALCOMM Windows Eudora Version 5.0.2
Date: Mon, 21 May 2001 12:36:56 -0400
To: samba at lists.samba.org
From: Jason Stewart <jstewart at rtl.org>
Subject: Windows 2000 and Printer Drivers
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Greetings,
When I try to set up a printer on our samba share with windows 2000, I
get a message "The server on which the 'NO DRIVER IS AVAILABLE FOR THIS
PRINTER' resides does not have the correct printer driver installed. If
you want to install the driver on your local computer..blah blah. I can set
up the printers just fine with Win9x, but 2000 balks about the driver not
being on the server. I used to be able to just click OK, then the catalog
of drivers would pop up. Now I get a box asking me for an INF file.
I recently switched from 2.0.7 to 2.2.0, and from BSD lpr to lprng. I
don't know which is causing me the troubles, but before I switched,
everything worked OK. I'm shy about putting the drivers on the server
because I understand that the win9x and win2000 printer drivers are
different. Is there a way that I can get the driver catalog to pop up in
2000, or is there a way that I can put both the 9x and 2000 versions of the
printer drivers on this box?
Thanks,
Jason Stewart
Return-Path: <urban at teststation.com>
Delivered-To: samba at samba.org
Received: from fungus.svenskatest.se (fungus.teststation.com
[212.32.186.211]) by lists.samba.org (Postfix) with ESMTP id 43A4E4978
for <samba at samba.org>; Mon, 21 May 2001 10:42:21 -0700 (PDT)
Received: from fw.teststation.com (srvfwume.svenskatest.se
[212.32.186.210]) by fungus.svenskatest.se (8.9.3/8.9.3) with SMTP id
TAA23927; Mon, 21 May 2001 19:42:49 +0200 (MET DST)
Received: from COLA by fw.teststation.com via smtpd (for
fungus.teststation.com [212.32.186.211]) with SMTP; 21 May 2001
17:19:13 UT
Date: Mon, 21 May 2001 19:42:47 +0200 (CEST)
From: Urban Widmark <urban at teststation.com>
X-Sender: <puw at cola.teststation.com>
To: Christian Fertig <cf at baer-ib.de>
Cc: <samba at samba.org>
Subject: smbclient (was Re: smbfs i/o error with large files (>10 MB))
In-Reply-To: <20010521131753.A2037 at ny.baer-ib.de>
Message-ID: <Pine.LNX.4.30.0105211549500.3118-100000 at cola.teststation.co
m>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Mon, 21 May 2001, Christian Fertig wrote:
> > This shows smbclient failing to write the file.
> >
> > Do you have an example where smbfs fails? Kernel messages would be nice.
>
> what do you exactly mean with example (because this was my example)?
Then this is not a smbfs problem. You wrote earlier:
"I've tryed with smbfs and directly with smbclient."
So I assumed that this was a problem with both. But you only have a
smbclient example, and not a smbfs example ... (?)
smbclient is the ftp-style client.
smbfs is a kernel filesystem for giving you access to files on smb servers
as if they were local and it uses smbmount to mount, not smbclient.
Messages from the kernel can be found where your syslog puts them, and the
most recent messages can be displayed with 'dmesg'.
> I just tested again with smbclient and the program just terminates,
> without error message. Not so nice :-(
I suspect that you may need to get a trace with a higher debuglevel (10)
from smbclient for anyone to know what is going on. Or a tcpdump.
But a guess on what is going on is that this is a network problem and not
a smbclient problem. half vs full duplex is a common error (net driver
that misdetects or hardware that isn't talking). Have you checked that?
/Urban
Return-Path: <urban at teststation.com>
Delivered-To: samba at samba.org
Received: from fungus.svenskatest.se (fungus.teststation.com
[212.32.186.211]) by lists.samba.org (Postfix) with ESMTP id 80FD64D73
for <samba at samba.org>; Mon, 21 May 2001 10:46:25 -0700 (PDT)
Received: from fw.teststation.com (srvfwume.svenskatest.se
[212.32.186.210]) by fungus.svenskatest.se (8.9.3/8.9.3) with SMTP id
TAA23959; Mon, 21 May 2001 19:47:13 +0200 (MET DST)
Received: from COLA by fw.teststation.com via smtpd (for
fungus.teststation.com [212.32.186.211]) with SMTP; 21 May 2001
17:23:37 UT
Date: Mon, 21 May 2001 19:47:12 +0200 (CEST)
From: Urban Widmark <urban at teststation.com>
X-Sender: <puw at cola.teststation.com>
To: Dmitry Melekhov <dm at belkam.com>
Cc: <samba at samba.org>
Subject: Re: smbmount problem
In-Reply-To: <3B08A23D.57CE5092 at belkam.com>
Message-ID: <Pine.LNX.4.30.0105211943150.13267-100000 at cola.teststation.c
om>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Mon, 21 May 2001, Dmitry Melekhov wrote:
> Grant wrote:
>
> > Reset the password in Win2k, works for me on the rare occasions this
> > happens.
>
> Yes, this helps. Thank you!
> But may be this is smbmount problem?
Possibly. I connect regularly to win2k servers in a NT4 domain and I have
never seen this. But if this is a standalone machine or if the account has
some time limit (change password every x time units?) that would be
different.
Feel free to try and trigger it again.
/Urban
Return-Path: <urban at teststation.com>
Delivered-To: samba at samba.org
Received: from fungus.svenskatest.se (fungus.teststation.com
[212.32.186.211]) by lists.samba.org (Postfix) with ESMTP id 449C84DDD
for <samba at samba.org>; Mon, 21 May 2001 10:48:40 -0700 (PDT)
Received: from fw.teststation.com (srvfwume.svenskatest.se
[212.32.186.210]) by fungus.svenskatest.se (8.9.3/8.9.3) with SMTP id
TAA23975; Mon, 21 May 2001 19:49:32 +0200 (MET DST)
Received: from COLA by fw.teststation.com via smtpd (for
fungus.teststation.com [212.32.186.211]) with SMTP; 21 May 2001
17:25:56 UT
Date: Mon, 21 May 2001 19:49:32 +0200 (CEST)
From: Urban Widmark <urban at teststation.com>
X-Sender: <puw at cola.teststation.com>
To: ".:mrva:." <mrva at mrva-hp.net>
Cc: <samba at samba.org>
Subject: Re: mount problem
In-Reply-To: <3B06A591.29539E8C at mrva-hp.net>
Message-ID: <Pine.LNX.4.30.0105211947250.13267-100000 at cola.teststation.c
om>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Sat, 19 May 2001, .:mrva:. wrote:
> Hi,
> I'm having problems with mounting windows share under linux
> OSes are windows 98 and slackware 7.1 with 2.2.19 kernel ...
> here is the output:
>
> root at marge:~# mount -t smbfs //192.168.0.1/upload /mnt/smb/upload
> mount: wrong fs type, bad option, bad superblock on
> //192.168.0.1/upload,
> or too many mounted file systems
> root at marge:~#
>
> I didnt mount windows share previously.
> Can it be a problem with smbfs module?
Do you even have a smbfs module?
If you do, check if there are any messages from the kernel.
I suspect that you do not have /sbin/mount.smbfs. It should be a symlink
to the smbmount binary and smbmnt needs to be in your path.
/Urban
Return-Path: <urban at teststation.com>
Delivered-To: samba at samba.org
Received: from fungus.svenskatest.se (fungus.teststation.com
[212.32.186.211]) by lists.samba.org (Postfix) with ESMTP id B36D64E15
for <samba at samba.org>; Mon, 21 May 2001 10:53:32 -0700 (PDT)
Received: from fw.teststation.com (srvfwume.svenskatest.se
[212.32.186.210]) by fungus.svenskatest.se (8.9.3/8.9.3) with SMTP id
TAA24018; Mon, 21 May 2001 19:54:19 +0200 (MET DST)
Received: from COLA by fw.teststation.com via smtpd (for
fungus.teststation.com [212.32.186.211]) with SMTP; 21 May 2001
17:30:44 UT
Date: Mon, 21 May 2001 19:54:18 +0200 (CEST)
From: Urban Widmark <urban at teststation.com>
X-Sender: <puw at cola.teststation.com>
To: Dave Phillips <sstauffer at uswest.net>
Cc: <samba at samba.org>
Subject: Re: SMBMOUNT
In-Reply-To: <000a01c0e071$ac373780$5480e53f at dave>
Message-ID: <Pine.LNX.4.30.0105211949390.13267-100000 at cola.teststation.c
om>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Sat, 19 May 2001, Dave Phillips wrote:
> I am having problems using the smbmount command. It, like many other
> commands(linuxconf, etc.), doesn't seem to exist on my machine. I was able to
^^^^^^^^^^^^^^^^^^^^^
Eh? Why don't you search for them then. Try one of:
locate smbmount
find / -name 'smbmount'
> use the command mount -t smbfs //windowsmachine/windowsdisk /mnt/test and
> this worked fine once. Now I get an error evapmc??? something like that, it
> says the directory doesn't exist. Samba works fine within it's own shell
Try it again and then post the complete error message, with the exact
commandline you use (cut-n-paste).
Please provide some other basic info about which versions of things you
have installed. At least the kernel version and samba version
(distribution name + version may help).
If it used to work and now doesn't, chances are that you changed
something. Like upgrade some software package, or gave root access to
your cat ... :)
/Urban
Return-Path: <hurtta at leija.mh.fmi.fi>
Delivered-To: samba at lists.samba.org
Received: from ns.fmi.fi (ns.fmi.fi [193.166.211.11]) by lists.samba.org
(Postfix) with ESMTP id 944594DEE for <samba at lists.samba.org>; Mon, 21
May 2001 11:03:01 -0700 (PDT)
Received: by ns.fmi.fi id VAA596863; Mon, 21 May 2001 21:03:46 +0300
(EEST)
Received: (Stripped) by ns.fmi.fi (with) id 20010521/VAA596863/001; Mon,
21 May 2001 21:03:42 +0300
Message-Id: <200105211803.f4LI3gPF025390 at leija.fmi.fi>
Subject: Re: Windows 2000 and Printer Drivers
In-Reply-To: <5.0.2.1.0.20010521122724.00a94d50 at 63.94.12.188>
To: Jason Stewart <jstewart at rtl.org>
Date: Mon, 21 May 2001 21:03:41 +0300 (EEST)
Cc: samba at lists.samba.org
From: Kari Hurtta <hurtta+samba at leija.mh.fmi.fi>
X-Mailer: ELM [version 2.4ME+ PL92 (25)]
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
> Greetings,
>
> When I try to set up a printer on our samba share with windows 2000, I
> get a message "The server on which the 'NO DRIVER IS AVAILABLE FOR THIS
> PRINTER' resides does not have the correct printer driver installed. If
> you want to install the driver on your local computer..blah blah. I can set
> up the printers just fine with Win9x, but 2000 balks about the driver not
> being on the server. I used to be able to just click OK, then the catalog
> of drivers would pop up. Now I get a box asking me for an INF file.
>
> I recently switched from 2.0.7 to 2.2.0, and from BSD lpr to lprng. I
> don't know which is causing me the troubles, but before I switched,
> everything worked OK. I'm shy about putting the drivers on the server
> because I understand that the win9x and win2000 printer drivers are
> different. Is there a way that I can get the driver catalog to pop up in
> 2000, or is there a way that I can put both the 9x and 2000 versions of the
> printer drivers on this box?
According of documentation 2.2.0 have completely new support for that.
It uses different system than 2.0 and there are different drivers
directories for different OSes.
On documentation:
---clip---
Next create the directory tree below the [print$] share for each
architecture you wish to support.
[print$]-----
|-W32X86 ; "Windows NT x86"
|-WIN40 ; "Windows 95/98"
|-W32ALPHA ; "Windows NT Alpha_AXP"
|-W32MIPS ; "Windows NT R4000"
|-W32PPC ; "Windows NT PowerPC"
----clap---
--
/"\ | Kari
\ / ASCII Ribbon Campaign | Hurtta
X Against HTML Mail |
/ \ |
Return-Path: <Errol.Fouquet at mms.gov>
Delivered-To: samba at lists.samba.org
Received: from imsdene.mms.gov (smtp.mms.gov [161.160.14.46]) by
lists.samba.org (Postfix) with ESMTP id A02834BDF for
<samba at lists.samba.org>; Mon, 21 May 2001 11:08:12 -0700 (PDT)
Received: by imsdene.mms.gov with Internet Mail Service (5.5.2650.21) id
<LLX9MV14>; Mon, 21 May 2001 12:09:06 -0600
Message-ID: <379313C94B76D2119AB60008C7A402E401E1FCEC at imsnolaa.nola.omm.
mms.gov>
From: "Fouquet, Errol" <Errol.Fouquet at mms.gov>
To: 'Jason Stewart' <jstewart at rtl.org>, samba at lists.samba.org
Subject: RE: Windows 2000 and Printer Drivers
Date: Mon, 21 May 2001 12:08:44 -0600
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2650.21)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Jason,
Had the very same thing happen to me. I believe that the problem is with
W2K. The way I was able to get around this was to install a local printer on
the W2K machine for whichever printer I was having the trouble with. After
doing this, the driver upload to Samba produced the "catalog" box, instead
of merely bombing out with an error message.
Hope it works for you
errol
Errol Fouquet - UNIX SysAdmin
Minerals Management Service, DOI
1201 Elmwood Park Blvd.
New Orleans, LA 70123
-----Original Message-----
From: Jason Stewart [mailto:jstewart at rtl.org]
Sent: Monday, May 21, 2001 11:37 AM
To: samba at lists.samba.org
Subject: Windows 2000 and Printer Drivers
Greetings,
When I try to set up a printer on our samba share with windows 2000,
I
get a message "The server on which the 'NO DRIVER IS AVAILABLE FOR THIS
PRINTER' resides does not have the correct printer driver installed. If
you want to install the driver on your local computer..blah blah. I can set
up the printers just fine with Win9x, but 2000 balks about the driver not
being on the server. I used to be able to just click OK, then the catalog
of drivers would pop up. Now I get a box asking me for an INF file.
I recently switched from 2.0.7 to 2.2.0, and from BSD lpr to lprng.
I
don't know which is causing me the troubles, but before I switched,
everything worked OK. I'm shy about putting the drivers on the server
because I understand that the win9x and win2000 printer drivers are
different. Is there a way that I can get the driver catalog to pop up in
2000, or is there a way that I can put both the 9x and 2000 versions of the
printer drivers on this box?
Thanks,
Jason Stewart
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <MDietrich at NA2.US.ML.com>
Delivered-To: samba at samba.org
Received: from wstutil12a.ml.com (wstutil12a-v.ml.com [209.65.19.67]) by
lists.samba.org (Postfix) with ESMTP id A30664586 for
<samba at samba.org>; Mon, 21 May 2001 12:25:24 -0700 (PDT)
Received: from wstutil13a.ml.com (wstutil13a [146.125.185.11]) by
wstutil12a.ml.com (8.11.3/8.11.3/wstutil12a-1.1) with ESMTP id
f4LJQDh12704 for <samba at samba.org>; Mon, 21 May 2001 15:26:13 -0400
(EDT)
Received: from ewfdwt03.exchange.ml.com (ewfdwt03.exchange.ml.com
[199.201.57.156]) by wstutil13a.ml.com (8.11.3/8.11.3/wstutil13a-1.0)
with SMTP id f4LJQHS16154 for <samba at samba.org>; Mon, 21 May 2001
15:26:17 -0400 (EDT)
Received: from 169.242.201.4 by ewfdwt03.exchange.ml.com with ESMTP (
Tumbleweed MMS SMTP Relay (MMS v4.7)); Mon, 21 May 2001 15:26:17 -0400
X-Server-Uuid: 3789b954-9c4e-11d3-af68-0008c73b0911
Received: by epcc01.hew.us.ml.com with Internet Mail Service (
5.5.2654.52) id <LBXPV4XF>; Mon, 21 May 2001 15:25:28 -0400
Message-ID: <AB15E2A4ED98D111A97F0004AC613C7901CC428D at edv304.na2.us.ml.c
om>
From: "Dietrich, Mary Jo (CFST)" <MDietrich at NA2.US.ML.com>
To: "'samba at samba.org'" <samba at samba.org>
Subject: Samba & SunOs
Date: Mon, 21 May 2001 15:25:20 -0400
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2654.52)
X-WSS-ID: 1717B453136365-01-01
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Looking for Samba version that runs on SunOs 4.X. HELP????????
MJ Dietrich
PCDT Merrill Lynch
(732) 764-8253
Return-Path: <santiago at haulpak.com>
Delivered-To: samba at samba.org
Received: from inet0.haulpak.com (inet0.haulpak.com [192.137.57.9]) by
lists.samba.org (Postfix) with ESMTP id B21C94B30 for
<samba at samba.org>; Mon, 21 May 2001 13:03:56 -0700 (PDT)
Received: from pegasus.haulpak.com (root at ftp.haulpak.com [192.137.57.5])
by inet0.haulpak.com (8.11.1/8.11.1) with ESMTP id f4LK4XF06073 for
<samba at samba.org>; Mon, 21 May 2001 15:04:33 -0500
Received: from haulpak.com (santiago at pc33.haulpak.com [192.137.57.233])
by pegasus.haulpak.com (8.11.1/8.11.1) with ESMTP id f4LK4Wo14092 for
<samba at samba.org>; Mon, 21 May 2001 15:04:33 -0500
Message-ID: <3B0974D0.2B3740C0 at haulpak.com>
Date: Mon, 21 May 2001 15:04:32 -0500
From: Jose Santiago <santiago at haulpak.com>
Organization: Komatsu Mining Systems
X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.4.3 i686)
X-Accept-Language: en-US, en, ja
MIME-Version: 1.0
To: samba at samba.org
Subject: NT_STATUS_ACCESS_VIOLATION when running 'rpcclient -c
"adddriver"'
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I have RTFM and the FAQ on how to use the new NT printer system. I have
tried uploading and configuring the driver system using an NT client,
Imprints, and manually running the rpcclient program. I am able to upload
the printer files and, but I get a NT_STATUS_ACCESS_VIOLATION when trying to
call the rpcclient 'adddriver' command. Unfortunately, there is not enough
information as to what the problem is for me to determine what is wrong? The
files are uploaded to //pc33/print$/W32X86 and //pc33/print$/WIN40 . The
print shares exist //pc33/prd070 and //pc33/prd067 . I can print using
smbclient //pc33/prd070 and using 'put'. Unfortunately, I have no clue as to
what is causing the NT_STATUS_ACCESS_VIOLATION from the log.
Should I be posting this to the news group instead?
================== The following is the log information from when I run
rpcclient:
santiago at pc33:~$ rpcclient pc33 -d 10 -Uroot -c 'adddriver "Windows NT x86"
"QMS magicolor
330:QSCRIPT.DLL:QMC330.PPD,QMC330.BPD:QSCRPTUI.DLL:QSCRIPT.HLP:NULL:RAW:qmc330.ppd,qmc330.bpd,qscript.hlp,qscrptui.dll,qscript.dll"'
Initialising global parameters
params.c:pm_process() - Processing configuration file
"/usr/local/samba/lib/smb.conf"
Processing section "[global]"
doing parameter workgroup = ENGRG
doing parameter guest account = smbguest
doing parameter security = share
doing parameter wins server = wins.haulpak.com
wins_srv_load_list(): Building WINS server list:
wins.haulpak.com,
1 WINS server listed.
doing parameter local master = no
doing parameter lm announce = auto
doing parameter name resolve order = lmhosts wins host bcast
doing parameter hosts allow = 192.137.57.0/255.255.255.0 localhost
10.122.0.0/255.255.0.0 192.168.0.0/255.255.0.0
doing parameter browseable = yes
doing parameter comment = %h->Engineering Samba %v (SCISY 7171)
doing parameter server string = %h->Engineering Samba %v (SCISY 7171)
doing parameter dead time = 15
doing parameter dont descend =
/appl,/proc,/boot,/mnt,/dev,/root,/var,/usr,/lib,/bin,/sbin
doing parameter lock directory = /usr/local/samba/var/locks
doing parameter strip dot = yes
doing parameter log file = /usr/local/samba/var/log.%m
doing parameter load printers = no
doing parameter max log size = 500
doing parameter min print space = 2000
doing parameter public = yes
doing parameter guest only = no
doing parameter invalid users = bin lp mail shutdown news ftp daemon uucp
dialin postmaster sys
doing parameter nis homedir = false
doing parameter null passwords = no
doing parameter client code page = 437
codepage_initialise: client code page = 437
load_client_codepage: loading codepage 437.
Adding chars 0x87 0x80 (l->u = True) (u->l = True)
Adding chars 0x81 0x9a (l->u = True) (u->l = True)
Adding chars 0x82 0x90 (l->u = True) (u->l = True)
Adding chars 0x83 0x41 (l->u = True) (u->l = False)
Adding chars 0x84 0x8e (l->u = True) (u->l = True)
Adding chars 0x85 0x41 (l->u = True) (u->l = False)
Adding chars 0x86 0x8f (l->u = True) (u->l = True)
Adding chars 0x88 0x45 (l->u = True) (u->l = False)
Adding chars 0x89 0x45 (l->u = True) (u->l = False)
Adding chars 0x8a 0x45 (l->u = True) (u->l = False)
Adding chars 0x8b 0x49 (l->u = True) (u->l = False)
Adding chars 0x8c 0x49 (l->u = True) (u->l = False)
Adding chars 0x8d 0x49 (l->u = True) (u->l = False)
Adding chars 0x91 0x92 (l->u = True) (u->l = True)
Adding chars 0x93 0x4f (l->u = True) (u->l = False)
Adding chars 0x94 0x99 (l->u = True) (u->l = True)
Adding chars 0x95 0x4f (l->u = True) (u->l = False)
Adding chars 0x96 0x55 (l->u = True) (u->l = False)
Adding chars 0x97 0x55 (l->u = True) (u->l = False)
Adding chars 0x9b 0x0 (l->u = False) (u->l = False)
Adding chars 0x9c 0x0 (l->u = False) (u->l = False)
Adding chars 0x9d 0x0 (l->u = False) (u->l = False)
Adding chars 0xa0 0x41 (l->u = True) (u->l = False)
Adding chars 0xa1 0x49 (l->u = True) (u->l = False)
Adding chars 0xa2 0x4f (l->u = True) (u->l = False)
Adding chars 0xa3 0x55 (l->u = True) (u->l = False)
Adding chars 0xa4 0xa5 (l->u = True) (u->l = True)
Adding chars 0xa8 0x0 (l->u = False) (u->l = False)
Adding chars 0xad 0x0 (l->u = False) (u->l = False)
Adding chars 0xae 0x0 (l->u = False) (u->l = False)
Adding chars 0xaf 0x0 (l->u = False) (u->l = False)
Adding chars 0xe0 0x0 (l->u = False) (u->l = False)
Adding chars 0xe1 0x0 (l->u = False) (u->l = False)
Adding chars 0xe2 0x0 (l->u = False) (u->l = False)
Adding chars 0xe3 0x0 (l->u = False) (u->l = False)
Adding chars 0xe4 0x0 (l->u = False) (u->l = False)
Adding chars 0xe5 0x0 (l->u = False) (u->l = False)
Adding chars 0xe6 0x0 (l->u = False) (u->l = False)
Adding chars 0xe7 0x0 (l->u = False) (u->l = False)
Adding chars 0xe8 0x0 (l->u = False) (u->l = False)
Adding chars 0xe9 0x0 (l->u = False) (u->l = False)
Adding chars 0xea 0x0 (l->u = False) (u->l = False)
Adding chars 0xeb 0x0 (l->u = False) (u->l = False)
Adding chars 0xec 0x0 (l->u = False) (u->l = False)
Adding chars 0xed 0x0 (l->u = False) (u->l = False)
Adding chars 0xee 0x0 (l->u = False) (u->l = False)
Adding chars 0xef 0x0 (l->u = False) (u->l = False)
load_unicode_map: loading unicode map for codepage 437.
doing parameter max connections = 0
doing parameter hide dot files = no
doing parameter unix realname = yes
doing parameter mangle case = yes
doing parameter case sensitive = no
doing parameter default case = lower
doing parameter preserve case = yes
doing parameter short preserve case = yes
doing parameter wide links = yes
doing parameter create mask = 0644
doing parameter directory mask = 0755
doing parameter dos filetimes = yes
doing parameter follow symlinks = yes
doing parameter printer admin = admin root administrator ntadmin jose
santiago
pm_process() returned Yes
lp_servicenumber: couldn't find homes
codepage_initialise: called twice - ignoring second client code page = 437
added interface ip=192.137.57.233 bcast=192.137.57.255 nmask=255.255.255.0
added interface ip=10.122.161.233 bcast=10.122.191.255 nmask=255.255.224.0
Serverzone is 18000
Enter Password:
cli_init_creds: user root domain flgs: 0
ntlmssp_cli_flgs:0
resolve_srv_name: pc33
resolve_lmhosts: Attempting lmhosts lookup for name pc33<0x20>
startlmhosts: Can't open lmhosts file /usr/local/samba/lib/lmhosts. Error
was No such file or directory
resolve_wins: Attempting wins lookup for name pc33<0x20>
wins_srv_count: WINS status: 1 servers.
wins.haulpak.com <0.0.0.0>: alive
resolve_wins: WINS server == <10.122.161.1>
bind succeeded on port 0
Sending a packet of len 50 to (10.122.161.1) on port 137
read_udp_socket: lastip 10.122.161.1 lastport 137 read: 68
parse_nmb: packet id = 28373
Received a packet of len 68 from (10.122.161.1) port 137
nmb packet from 10.122.161.1(137) header: id=28373 opcode=Query(0)
response=Yes header: flags: bcast=No rec_avail=Yes rec_des=Yes trunc=No
auth=Yes
header: rcode=0 qdcount=0 ancount=1 nscount=0 arcount=0
answers: nmb_name=PC33<20> rr_type=32 rr_class=1 ttl=518394
answers 0 char @..z.. at ...9. hex 40000A7AA1E94000C08939E9
Got a positive name query response from 10.122.161.1 ( 10.122.161.233
192.137.57.233 )
cli_establish_connection: PC33<00> connecting to PC33<20> (10.122.161.233) -
root []
Connecting to 10.122.161.233 at port 139
socket option SO_KEEPALIVE = 0
socket option SO_REUSEADDR = 0
socket option SO_BROADCAST = 0
socket option TCP_NODELAY = 1
socket option IPTOS_LOWDELAY = 0
socket option IPTOS_THROUGHPUT = 0
socket option SO_SNDBUF = 49452
socket option SO_RCVBUF = 87380
socket option SO_SNDLOWAT = 1
socket option SO_RCVLOWAT = 1
socket option SO_SNDTIMEO = 0
socket option SO_RCVTIMEO = 0
write_socket(3,76)
write_socket(3,76) wrote 76
Sent session request
got smb length of 0
size=0
smb_com=0x0
smb_rcls=0
smb_reh=0
smb_err=0
smb_flg=0
smb_flg2=0
smb_tid=0
smb_pid=0
smb_uid=0
smb_mid=0
smt_wct=0
smb_bcc=0
write_socket(3,168)
write_socket(3,168) wrote 168
got smb length of 75
size=75
smb_com=0x72
smb_rcls=0
smb_reh=0
smb_err=0
smb_flg=136
smb_flg2=1
smb_tid=0
smb_pid=17575
smb_uid=0
smb_mid=1
smt_wct=17
smb_vwv[0]=6 (0x6)
smb_vwv[1]=12800 (0x3200)
smb_vwv[2]=256 (0x100)
smb_vwv[3]=65280 (0xFF00)
smb_vwv[4]=255 (0xFF)
smb_vwv[5]=0 (0x0)
smb_vwv[6]=256 (0x100)
smb_vwv[7]=43008 (0xA800)
smb_vwv[8]=68 (0x44)
smb_vwv[9]=47360 (0xB900)
smb_vwv[10]=3 (0x3)
smb_vwv[11]=32768 (0x8000)
smb_vwv[12]=64606 (0xFC5E)
smb_vwv[13]=11692 (0x2DAC)
smb_vwv[14]=49378 (0xC0E2)
smb_vwv[15]=11265 (0x2C01)
smb_vwv[16]=1 (0x1)
smb_bcc=6
[000] 45 4E 47 52 47 00 ENGRG.
size=75
smb_com=0x72
smb_rcls=0
smb_reh=0
smb_err=0
smb_flg=136
smb_flg2=1
smb_tid=0
smb_pid=17575
smb_uid=0
smb_mid=1
smt_wct=17
smb_vwv[0]=6 (0x6)
smb_vwv[1]=12800 (0x3200)
smb_vwv[2]=256 (0x100)
smb_vwv[3]=65280 (0xFF00)
smb_vwv[4]=255 (0xFF)
smb_vwv[5]=0 (0x0)
smb_vwv[6]=256 (0x100)
smb_vwv[7]=43008 (0xA800)
smb_vwv[8]=68 (0x44)
smb_vwv[9]=47360 (0xB900)
smb_vwv[10]=3 (0x3)
smb_vwv[11]=32768 (0x8000)
smb_vwv[12]=64606 (0xFC5E)
smb_vwv[13]=11692 (0x2DAC)
smb_vwv[14]=49378 (0xC0E2)
smb_vwv[15]=11265 (0x2C01)
smb_vwv[16]=1 (0x1)
smb_bcc=6
[000] 45 4E 47 52 47 00 ENGRG.
write_socket(3,84)
write_socket(3,84) wrote 84
got smb length of 64
size=64
smb_com=0x73
smb_rcls=0
smb_reh=0
smb_err=0
smb_flg=136
smb_flg2=1
smb_tid=0
smb_pid=17575
smb_uid=0
smb_mid=1
smt_wct=3
smb_vwv[0]=255 (0xFF)
smb_vwv[1]=0 (0x0)
smb_vwv[2]=1 (0x1)
smb_bcc=23
[000] 55 6E 69 78 00 53 61 6D 62 61 20 32 2E 32 2E 30 Unix.Sam ba 2.2.0
[010] 00 45 4E 47 52 47 00 .ENGRG.
size=64
smb_com=0x73
smb_rcls=0
smb_reh=0
smb_err=0
smb_flg=136
smb_flg2=1
smb_tid=0
smb_pid=17575
smb_uid=0
smb_mid=1
smt_wct=3
smb_vwv[0]=255 (0xFF)
smb_vwv[1]=0 (0x0)
smb_vwv[2]=1 (0x1)
smb_bcc=23
[000] 55 6E 69 78 00 53 61 6D 62 61 20 32 2E 32 2E 30 Unix.Sam ba 2.2.0
[010] 00 45 4E 47 52 47 00 .ENGRG.
write_socket(3,71)
write_socket(3,71) wrote 71
got smb length of 49
size=49
smb_com=0x75
smb_rcls=0
smb_reh=0
smb_err=0
smb_flg=136
smb_flg2=1
smb_tid=1
smb_pid=17575
smb_uid=0
smb_mid=1
smt_wct=3
smb_vwv[0]=255 (0xFF)
smb_vwv[1]=0 (0x0)
smb_vwv[2]=1 (0x1)
smb_bcc=8
[000] 49 50 43 00 49 50 43 00 IPC.IPC.
write_socket(3,96)
write_socket(3,96) wrote 96
got smb length of 103
size=103
smb_com=0xa2
smb_rcls=0
smb_reh=0
smb_err=0
smb_flg=136
smb_flg2=1
smb_tid=1
smb_pid=17575
smb_uid=0
smb_mid=1
smt_wct=34
smb_vwv[0]=255 (0xFF)
smb_vwv[1]=0 (0x0)
smb_vwv[2]=14592 (0x3900)
smb_vwv[3]=368 (0x170)
smb_vwv[4]=0 (0x0)
smb_vwv[5]=0 (0x0)
smb_vwv[6]=0 (0x0)
smb_vwv[7]=0 (0x0)
smb_vwv[8]=0 (0x0)
smb_vwv[9]=0 (0x0)
smb_vwv[10]=0 (0x0)
smb_vwv[11]=0 (0x0)
smb_vwv[12]=0 (0x0)
smb_vwv[13]=0 (0x0)
smb_vwv[14]=0 (0x0)
smb_vwv[15]=0 (0x0)
smb_vwv[16]=0 (0x0)
smb_vwv[17]=0 (0x0)
smb_vwv[18]=0 (0x0)
smb_vwv[19]=0 (0x0)
smb_vwv[20]=0 (0x0)
smb_vwv[21]=32768 (0x8000)
smb_vwv[22]=0 (0x0)
smb_vwv[23]=0 (0x0)
smb_vwv[24]=0 (0x0)
smb_vwv[25]=0 (0x0)
smb_vwv[26]=0 (0x0)
smb_vwv[27]=0 (0x0)
smb_vwv[28]=0 (0x0)
smb_vwv[29]=0 (0x0)
smb_vwv[30]=0 (0x0)
smb_vwv[31]=512 (0x200)
smb_vwv[32]=65280 (0xFF00)
smb_vwv[33]=5 (0x5)
smb_bcc=0
Bind RPC Pipe[7039]: \PIPE\spoolss
Bind Abstract Syntax: [000] 78 56 34 12 34 12 CD AB EF 00 01 23 45 67 89
AB xV4.4... ...#Eg..
[010] 01 00 00 00 ....
Bind Transfer Syntax: [000] 04 5D 88 8A EB 1C C9 11 9F E8 08 00 2B 10 48
60 .]...... ....+.H`
[010] 02 00 00 00 ....
000000 smb_io_rpc_hdr hdr
0000 major : 05
0001 minor : 00
0002 pkt_type : 0b
0003 flags : 00
0004 pack_type0: 10
0005 pack_type1: 00
0006 pack_type2: 00
0007 pack_type3: 00
0008 frag_len : 0048
000a auth_len : 0000
000c call_id : 00000001
000010 smb_io_rpc_hdr_rb
000010 smb_io_rpc_hdr_bba
0010 max_tsize: 1630
0012 max_rsize: 1630
0014 assoc_gid: 00000000
0018 num_elements: 00000001
001c context_id : 0000
001e num_syntaxes: 01
00001f smb_io_rpc_iface
0020 data : 12345678
0024 data : 1234
0026 data : abcd
0028 data : ef 00 01 23 45 67 89 ab
0030 version: 00000001
000034 smb_io_rpc_iface
0034 data : 8a885d04
0038 data : 1ceb
003a data : 11c9
003c data : 9f e8 08 00 2b 10 48 60
0044 version: 00000002
rpc_api_pipe: cmd:26 fnum:7039
size=148
smb_com=0x25
smb_rcls=0
smb_reh=0
smb_err=0
smb_flg=8
smb_flg2=1
smb_tid=1
smb_pid=17575
smb_uid=0
smb_mid=1
smt_wct=16
smb_vwv[0]=0 (0x0)
smb_vwv[1]=72 (0x48)
smb_vwv[2]=0 (0x0)
smb_vwv[3]=72 (0x48)
smb_vwv[4]=0 (0x0)
smb_vwv[5]=0 (0x0)
smb_vwv[6]=0 (0x0)
smb_vwv[7]=0 (0x0)
smb_vwv[8]=0 (0x0)
smb_vwv[9]=0 (0x0)
smb_vwv[10]=76 (0x4C)
smb_vwv[11]=72 (0x48)
smb_vwv[12]=76 (0x4C)
smb_vwv[13]=2 (0x2)
smb_vwv[14]=38 (0x26)
smb_vwv[15]=28729 (0x7039)
smb_bcc=81
[000] 5C 50 49 50 45 5C 00 00 00 05 00 0B 00 10 00 00 \PIPE\.. ........
[010] 00 48 00 00 00 01 00 00 00 30 16 30 16 00 00 00 .H...... .0.0....
[020] 00 01 00 00 00 00 00 01 00 78 56 34 12 34 12 CD ........ .xV4.4..
[030] AB EF 00 01 23 45 67 89 AB 01 00 00 00 04 5D 88 ....#Eg. ......].
[040] 8A EB 1C C9 11 9F E8 08 00 2B 10 48 60 02 00 00 ........ .+.H`...
[050] 00 .
write_socket(3,152)
write_socket(3,152) wrote 152
got smb length of 124
size=124
smb_com=0x25
smb_rcls=0
smb_reh=0
smb_err=0
smb_flg=136
smb_flg2=1
smb_tid=1
smb_pid=17575
smb_uid=0
smb_mid=1
smt_wct=10
smb_vwv[0]=0 (0x0)
smb_vwv[1]=68 (0x44)
smb_vwv[2]=0 (0x0)
smb_vwv[3]=0 (0x0)
smb_vwv[4]=56 (0x38)
smb_vwv[5]=0 (0x0)
smb_vwv[6]=68 (0x44)
smb_vwv[7]=56 (0x38)
smb_vwv[8]=0 (0x0)
smb_vwv[9]=0 (0x0)
smb_bcc=69
[000] 00 05 00 0C 03 10 00 00 00 44 00 00 00 01 00 00 ........ .D......
[010] 00 30 16 30 16 F0 53 00 00 0E 00 5C 50 49 50 45 .0.0..S. ...\PIPE
[020] 5C 73 70 6F 6F 6C 73 73 00 01 00 00 00 00 00 00 \spoolss ........
[030] 00 04 5D 88 8A EB 1C C9 11 9F E8 08 00 2B 10 48 ..]..... .....+.H
[040] 60 02 00 00 00 `....
size=124
smb_com=0x25
smb_rcls=0
smb_reh=0
smb_err=0
smb_flg=136
smb_flg2=1
smb_tid=1
smb_pid=17575
smb_uid=0
smb_mid=1
smt_wct=10
smb_vwv[0]=0 (0x0)
smb_vwv[1]=68 (0x44)
smb_vwv[2]=0 (0x0)
smb_vwv[3]=0 (0x0)
smb_vwv[4]=56 (0x38)
smb_vwv[5]=0 (0x0)
smb_vwv[6]=68 (0x44)
smb_vwv[7]=56 (0x38)
smb_vwv[8]=0 (0x0)
smb_vwv[9]=0 (0x0)
smb_bcc=69
[000] 00 05 00 0C 03 10 00 00 00 44 00 00 00 01 00 00 ........ .D......
[010] 00 30 16 30 16 F0 53 00 00 0E 00 5C 50 49 50 45 .0.0..S. ...\PIPE
[020] 5C 73 70 6F 6F 6C 73 73 00 01 00 00 00 00 00 00 \spoolss ........
[030] 00 04 5D 88 8A EB 1C C9 11 9F E8 08 00 2B 10 48 ..]..... .....+.H
[040] 60 02 00 00 00 `....
Realloc asked for 0 bytes
rpc_check_hdr: rdata->data_size = 68
000000 smb_io_rpc_hdr rpc_hdr
0000 major : 05
0001 minor : 00
0002 pkt_type : 0c
0003 flags : 03
0004 pack_type0: 10
0005 pack_type1: 00
0006 pack_type2: 00
0007 pack_type3: 00
0008 frag_len : 0044
000a auth_len : 0000
000c call_id : 00000001
rpc_api_pipe: len left: 0 smbtrans read: 68
rpc_api_pipe: fragment first and last both set
rpc_pipe_bind: rpc_api_pipe returned OK.
000010 smb_io_rpc_hdr_ba
000010 smb_io_rpc_hdr_bba
0010 max_tsize: 1630
0012 max_rsize: 1630
0014 assoc_gid: 000053f0
000018 smb_io_rpc_addr_str
0018 len: 000e
001a str: \PIPE\spoolss.
000028 smb_io_rpc_results
0028 num_results: 01
002c result : 0000
002e reason : 0000
000030 smb_io_rpc_iface
0030 data : 8a885d04
0034 data : 1ceb
0036 data : 11c9
0038 data : 9f e8 08 00 2b 10 48 60
0040 version: 00000002
bind_rpc_pipe: searching pipe name: client:\PIPE\lsarpc server:\PIPE\lsass
bind_rpc_pipe: searching pipe name: client:\PIPE\samr server:\PIPE\lsass
bind_rpc_pipe: searching pipe name: client:\PIPE\NETLOGON server:\PIPE\lsass
bind_rpc_pipe: searching pipe name: client:\PIPE\srvsvc server:\PIPE\ntsvcs
bind_rpc_pipe: searching pipe name: client:\PIPE\wkssvc server:\PIPE\ntsvcs
bind_rpc_pipe: searching pipe name: client:\PIPE\winreg server:\PIPE\winreg
bind_rpc_pipe: searching pipe name: client:\PIPE\spoolss
server:\PIPE\spoolss
bind_rpc_pipe: server pipe_name found: \PIPE\spoolss
bind_rpc_pipe: accepted!
make_spoolss_q_addprinterdriver
000000 spoolss_io_q_addprinterdriver
0000 server_name_ptr: 00000001
000004 smb_io_unistr2 server_name
0004 uni_max_len: 00000007
0008 undoc : 00000000
000c uni_str_len: 00000007
0010 buffer : \.\.P.C.3.3...
0020 info_level: 00000003
000024 spool_io_printer_driver_info_level
0024 level: 00000003
0028 ptr: 00000001
00002c spool_io_printer_driver_info_level_3
002c cversion: 00000002
0030 name: 00000001
0034 environment: 00000001
0038 driverpath: 00000001
003c datafile: 00000001
0040 configfile: 00000001
0044 helpfile: 00000001
0048 monitorname: 00000000
004c defaultdatatype: 00000001
0050 dependentfilessize: 0000003c
0054 dependentfiles: 00000001
000058 smb_io_unistr2 name
0058 uni_max_len: 00000012
005c undoc : 00000000
0060 uni_str_len: 00000012
0064 buffer : Q.M.S. .m.a.g.i.c.o.l.o.r. .3.3.0...
000088 smb_io_unistr2 environment
0088 uni_max_len: 0000000f
008c undoc : 00000000
0090 uni_str_len: 0000000f
0094 buffer : W.i.n.d.o.w.s. .N.T. .x.8.6...
0000b2 smb_io_unistr2 driverpath
00b4 uni_max_len: 0000000c
00b8 undoc : 00000000
00bc uni_str_len: 0000000c
00c0 buffer : Q.S.C.R.I.P.T...D.L.L...
0000d8 smb_io_unistr2 datafile
00d8 uni_max_len: 00000016
00dc undoc : 00000000
00e0 uni_str_len: 00000016
00e4 buffer :
Q.M.C.3.3.0...P.P.D.,.Q.M.C.3.3.0...B.P.D...
000110 smb_io_unistr2 configfile
0110 uni_max_len: 0000000d
0114 undoc : 00000000
0118 uni_str_len: 0000000d
011c buffer : Q.S.C.R.P.T.U.I...D.L.L...
000136 smb_io_unistr2 helpfile
0138 uni_max_len: 0000000c
013c undoc : 00000000
0140 uni_str_len: 0000000c
0144 buffer : Q.S.C.R.I.P.T...H.L.P...
00015c smb_io_unistr2 - NULL monitorname
00015c smb_io_unistr2 defaultdatatype
015c uni_max_len: 00000004
0160 undoc : 00000000
0164 uni_str_len: 00000004
0168 buffer : R.A.W...
000170 smb_io_buffer5
0170 buf_len: 0000003c
0174 buffer:
q.m.c.3.3.0...p.p.d...q.m.c.3.3.0...b.p.d...q.s.c.r.i.p.t...h.l.p...q.s.c.r.p.t.u.i...d.l.l...q.s.c.r.i.p.t...d.l.l.....
rpc_api_pipe_req: Outgoing data not a multiple of 8 bytes....
create_rpc_request: opnum: 0x9 data_len: 0x204
create_rpc_request: data_len: 204 auth_len: 0 alloc_hint: 1f4
000000 smb_io_rpc_hdr hdr
0000 major : 05
0001 minor : 00
0002 pkt_type : 00
0003 flags : 03
0004 pack_type0: 10
0005 pack_type1: 00
0006 pack_type2: 00
0007 pack_type3: 00
0008 frag_len : 0204
000a auth_len : 0000
000c call_id : 00000002
000010 smb_io_rpc_hdr_req hdr_req
0010 alloc_hint: 000001f4
0014 context_id: 0000
0016 opnum : 0009
rpc_api_pipe: cmd:26 fnum:7039
size=592
smb_com=0x25
smb_rcls=0
smb_reh=0
smb_err=0
smb_flg=8
smb_flg2=1
smb_tid=1
smb_pid=17575
smb_uid=0
smb_mid=1
smt_wct=16
smb_vwv[0]=0 (0x0)
smb_vwv[1]=516 (0x204)
smb_vwv[2]=0 (0x0)
smb_vwv[3]=516 (0x204)
smb_vwv[4]=0 (0x0)
smb_vwv[5]=0 (0x0)
smb_vwv[6]=0 (0x0)
smb_vwv[7]=0 (0x0)
smb_vwv[8]=0 (0x0)
smb_vwv[9]=0 (0x0)
smb_vwv[10]=76 (0x4C)
smb_vwv[11]=516 (0x204)
smb_vwv[12]=76 (0x4C)
smb_vwv[13]=2 (0x2)
smb_vwv[14]=38 (0x26)
smb_vwv[15]=28729 (0x7039)
smb_bcc=525
[000] 5C 50 49 50 45 5C 00 00 00 05 00 00 03 10 00 00 \PIPE\.. ........
[010] 00 04 02 00 00 02 00 00 00 F4 01 00 00 00 00 09 ........ ........
[020] 00 01 00 00 00 07 00 00 00 00 00 00 00 07 00 00 ........ ........
[030] 00 5C 00 5C 00 50 00 43 00 33 00 33 00 00 00 00 .\.\.P.C .3.3....
[040] 00 03 00 00 00 03 00 00 00 01 00 00 00 02 00 00 ........ ........
[050] 00 01 00 00 00 01 00 00 00 01 00 00 00 01 00 00 ........ ........
[060] 00 01 00 00 00 01 00 00 00 00 00 00 00 01 00 00 ........ ........
[070] 00 3C 00 00 00 01 00 00 00 12 00 00 00 00 00 00 .<...... ........
[080] 00 12 00 00 00 51 00 4D 00 53 00 20 00 6D 00 61 .....Q.M .S. .m.a
[090] 00 67 00 69 00 63 00 6F 00 6C 00 6F 00 72 00 20 .g.i.c.o .l.o.r.
[0A0] 00 33 00 33 00 30 00 00 00 0F 00 00 00 00 00 00 .3.3.0.. ........
[0B0] 00 0F 00 00 00 57 00 69 00 6E 00 64 00 6F 00 77 .....W.i .n.d.o.w
[0C0] 00 73 00 20 00 4E 00 54 00 20 00 78 00 38 00 36 .s. .N.T . .x.8.6
[0D0] 00 00 00 00 00 0C 00 00 00 00 00 00 00 0C 00 00 ........ ........
[0E0] 00 51 00 53 00 43 00 52 00 49 00 50 00 54 00 2E .Q.S.C.R .I.P.T..
[0F0] 00 44 00 4C 00 4C 00 00 00 16 00 00 00 00 00 00 .D.L.L.. ........
[100] 00 16 00 00 00 51 00 4D 00 43 00 33 00 33 00 30 .....Q.M .C.3.3.0
[110] 00 2E 00 50 00 50 00 44 00 2C 00 51 00 4D 00 43 ...P.P.D .,.Q.M.C
[120] 00 33 00 33 00 30 00 2E 00 42 00 50 00 44 00 00 .3.3.0.. .B.P.D..
[130] 00 0D 00 00 00 00 00 00 00 0D 00 00 00 51 00 53 ........ .....Q.S
[140] 00 43 00 52 00 50 00 54 00 55 00 49 00 2E 00 44 .C.R.P.T .U.I...D
[150] 00 4C 00 4C 00 00 00 00 00 0C 00 00 00 00 00 00 .L.L.... ........
[160] 00 0C 00 00 00 51 00 53 00 43 00 52 00 49 00 50 .....Q.S .C.R.I.P
[170] 00 54 00 2E 00 48 00 4C 00 50 00 00 00 04 00 00 .T...H.L .P......
[180] 00 00 00 00 00 04 00 00 00 52 00 41 00 57 00 00 ........ .R.A.W..
[190] 00 3C 00 00 00 71 00 6D 00 63 00 33 00 33 00 30 .<...q.m .c.3.3.0
[1A0] 00 2E 00 70 00 70 00 64 00 00 00 71 00 6D 00 63 ...p.p.d ...q.m.c
[1B0] 00 33 00 33 00 30 00 2E 00 62 00 70 00 64 00 00 .3.3.0.. .b.p.d..
[1C0] 00 71 00 73 00 63 00 72 00 69 00 70 00 74 00 2E .q.s.c.r .i.p.t..
[1D0] 00 68 00 6C 00 70 00 00 00 71 00 73 00 63 00 72 .h.l.p.. .q.s.c.r
[1E0] 00 70 00 74 00 75 00 69 00 2E 00 64 00 6C 00 6C .p.t.u.i ...d.l.l
[1F0] 00 00 00 71 00 73 00 63 00 72 00 69 00 70 00 74 ...q.s.c .r.i.p.t
write_socket(3,596)
write_socket(3,596) wrote 596
got smb length of 84
size=84
smb_com=0x25
smb_rcls=0
smb_reh=0
smb_err=0
smb_flg=136
smb_flg2=1
smb_tid=1
smb_pid=17575
smb_uid=0
smb_mid=1
smt_wct=10
smb_vwv[0]=0 (0x0)
smb_vwv[1]=28 (0x1C)
smb_vwv[2]=0 (0x0)
smb_vwv[3]=0 (0x0)
smb_vwv[4]=56 (0x38)
smb_vwv[5]=0 (0x0)
smb_vwv[6]=28 (0x1C)
smb_vwv[7]=56 (0x38)
smb_vwv[8]=0 (0x0)
smb_vwv[9]=0 (0x0)
smb_bcc=29
[000] 00 05 00 02 03 10 00 00 00 1C 00 00 00 02 00 00 ........ ........
[010] 00 04 00 00 00 00 00 00 00 05 00 00 00 ........ .....
size=84
smb_com=0x25
smb_rcls=0
smb_reh=0
smb_err=0
smb_flg=136
smb_flg2=1
smb_tid=1
smb_pid=17575
smb_uid=0
smb_mid=1
smt_wct=10
smb_vwv[0]=0 (0x0)
smb_vwv[1]=28 (0x1C)
smb_vwv[2]=0 (0x0)
smb_vwv[3]=0 (0x0)
smb_vwv[4]=56 (0x38)
smb_vwv[5]=0 (0x0)
smb_vwv[6]=28 (0x1C)
smb_vwv[7]=56 (0x38)
smb_vwv[8]=0 (0x0)
smb_vwv[9]=0 (0x0)
smb_bcc=29
[000] 00 05 00 02 03 10 00 00 00 1C 00 00 00 02 00 00 ........ ........
[010] 00 04 00 00 00 00 00 00 00 05 00 00 00 ........ .....
Realloc asked for 0 bytes
rpc_check_hdr: rdata->data_size = 28
000000 smb_io_rpc_hdr rpc_hdr
0000 major : 05
0001 minor : 00
0002 pkt_type : 02
0003 flags : 03
0004 pack_type0: 10
0005 pack_type1: 00
0006 pack_type2: 00
0007 pack_type3: 00
0008 frag_len : 001c
000a auth_len : 0000
000c call_id : 00000002
000010 smb_io_rpc_hdr_resp rpc_hdr_resp
0010 alloc_hint: 00000004
0014 context_id: 0000
0016 cancel_ct : 00
0017 reserved : 00
rpc_api_pipe: len left: 0 smbtrans read: 28
rpc_api_pipe: fragment first and last both set
000018 spoolss_io_r_addprinterdriver
0018 status: 00000005
result was NT_STATUS_ACCESS_VIOLATION
=============== My smb.conf file is as follows:
[global]
workgroup = ENGRG
guest account = smbguest
security = share
wins server = wins.haulpak.com
local master = no
lm announce = auto
name resolve order = lmhosts wins host bcast
hosts allow = 192.137.57.0/255.255.255.0 localhost \
10.122.0.0/255.255.0.0 192.168.0.0/255.255.0.0
browseable = yes
comment = %h->Engineering Samba %v (SCISY 7171)
server string = %h->Engineering Samba %v (SCISY 7171)
dead time = 15
dont descend = /appl,/proc,/boot,/mnt,/dev,/root,/var,/usr,/lib,/bin,/sbin
lock directory = /usr/local/samba/var/locks
strip dot = yes
log file = /usr/local/samba/var/log.%m
load printers = no
max log size = 500
min print space = 2000
public = yes
guest only = no
invalid users = bin lp mail shutdown news ftp daemon \
uucp dialin postmaster sys
nis homedir = false
null passwords = no
client code page = 437
max connections = 0
hide dot files = no
unix realname = yes
mangle case = yes
case sensitive = no
default case = lower
preserve case = yes
short preserve case = yes
wide links = yes
create mask = 0644
directory mask = 0755
dos filetimes = yes
follow symlinks = yes
printer admin = admin root administrator ntadmin jose santiago
[all]
guest ok = no
comment = Root Share
writeable = yes
path = /
## See the Printing documentation for 2.2.0.
[print$]
comment = Print Driver Distribution Service
path = /usr/local/samba/print
guest ok = yes
browseable = yes
read only = yes
write list = admin root administrator ntadmin jose santiago
[prd070]
print command = /appl/rlpr/bin/rlpr --user=%U@%m --printhost=prnsrv
--printer=%p -r %s
lpq command = /usr/local/LPRng/bin/lpq -P%p at prnsrv.haulpak.com | sed -e
'/^[^ ]/s/\+/-/' -e '/^[^ ].*\@..*\@/!s/\@/\-/' -e '/^[^
].*\@..*\@/s/\@/\-/'
lprm command = /usr/local/LPRng/bin/lprm -P%p at prnsrv.haulpak.com %j
lppause command = /usr/local/LPRng/sbin/lpc -P%p at prnsrv.haulpak.com hold
%j
lpresume command = /usr/local/LPRng/sbin/lpc -P%p at prnsrv.haulpak.com
release %j
queuepause command = /usr/local/LPRng/sbin/lpc -P%p at prnsrv.haulpak.com
stop
queueresume command = /usr/local/LPRng/sbin/lpc -P%p at prnsrv.haulpak.com
start
comment = (prd070) QMS MagiColor 330 SCISY
path = /tmp
guest ok = yes
printable = yes
printer = prd070
[prd067]
print command = /appl/rlpr/bin/rlpr --user=%U@%m --printhost=prnsrv
--printer=%p -r %s
lpq command = /usr/local/LPRng/bin/lpq -P%p at prnsrv.haulpak.com | sed -e
'/^[^ ]/s/\+/-/' -e '/^[^ ].*\@..*\@/!s/\@/\-/' -e '/^[^
].*\@..*\@/s/\@/\-/'
lprm command = /usr/local/LPRng/bin/lprm -P%p at prnsrv.haulpak.com %j
lppause command = /usr/local/LPRng/sbin/lpc -P%p at prnsrv.haulpak.com hold
%j
lpresume command = /usr/local/LPRng/sbin/lpc -P%p at prnsrv.haulpak.com
release %j
queuepause command = /usr/local/LPRng/sbin/lpc -P%p at prnsrv.haulpak.com
stop
queueresume command = /usr/local/LPRng/sbin/lpc -P%p at prnsrv.haulpak.com
start
comment = (prd067) QMS MagiColor 2 Analytical
path = /tmp
guest ok = yes
printable = yes
printer = prd067
======= The output from the Imprints upload and configure was:
root at pc33:~# /usr/local/imprints/scripts/install_printer_drivers.pl
--verbose --authfile=/root/authfile
--local-pkg=/usr/local/imprints/packages/qms-ps-mc330-1.00.tar.gz 'QMS
Magicolor 330'
Exploding package...
//usr/local/imprints/packages/qms-ps-mc330-1.00.tar.gz: 66.7%
Installing package...
[rpc]: Printer Driver Information :
[rpc]: Printer Model = QMS magicolor 330
[rpc]: Environment = W32X86
[rpc]: Driver Filename = QSCRIPT.DLL
[rpc]: Data Filename = QMC330.PPD,QMC330.BPD
[rpc]: Config Filename = QSCRPTUI.DLL
[rpc]: Help Filename = QSCRIPT.HLP
[rpc]: Installing Windows NT x86 drivers for QMS magicolor 330...
[rpc]: Printer Driver Upload Directory = \\PC33\print$\W32X86
[rpc]: putting file qmc330.ppd as \W32X86\qmc330.ppd (18594.8 kb/s) (average
18595.7 kb/s)
[rpc]: putting file qmc330.bpd as \W32X86\qmc330.bpd (17775.6 kb/s) (average
18322.9 kb/s)
[rpc]: putting file qscript.hlp as \W32X86\qscript.hlp (26327.7 kb/s)
(average 22897.5 kb/s)
[rpc]: putting file qscrptui.dll as \W32X86\qscrptui.dll (33168.0 kb/s)
(average 28939.2 kb/s)
[rpc]: putting file qscript.dll as \W32X86\qscript.dll (31758.3 kb/s)
(average 29915.2 kb/s)
[rpc]: Printer QMS magicolor 330 successfully installed.
[rpc]: Installed arch: Windows NT x86
[rpc]: Printer Driver Information :
[rpc]: Printer Model = QMS Magicolor 330
[rpc]: Environment = WIN40
[rpc]: Driver Filename = QMS95.DRV
[rpc]: Data Filename = QMSMC330.PPD
[rpc]: Config Filename = QMS95.DRV
[rpc]: Help Filename =
[rpc]: Installing Windows 4.0 drivers for QMS Magicolor 330...
[rpc]: Printer Driver Upload Directory = \\PC33\print$\WIN40
[rpc]: putting file qmsmc330.ppd as \WIN40\qmsmc330.ppd (22675.7 kb/s)
(average
22676.8 kb/s)
[rpc]: putting file qmsps2.dll as \WIN40\qmsps2.dll (30736.2 kb/s) (average
28945.5 kb/s)
[rpc]: putting file driverui.hlp as \WIN40\driverui.hlp (29374.5 kb/s)
(average
29181.6 kb/s)
[rpc]: putting file driverui.exe as \WIN40\driverui.exe (31428.4 kb/s)
(average
30106.8 kb/s)
[rpc]: putting file qms95.drv as \WIN40\qms95.drv (29763.0 kb/s) (average
30048.2 kb/s)
[rpc]: Printer QMS Magicolor 330 successfully installed.
[rpc]: Installed arch: Windows 4.0
Cleaning up temporary files...
--
Jose Santiago
Senior Systems Analyst - Scientific Systems
Komatsu Mining Systems - Peoria Operations
2300 N.E. Adams Street
P.O. Box 240
Peoria, IL 61650-0240
Voice:309-672-7325 Fax:309-672-7753
mailto:santiago at haulpak.com
Return-Path: <kourosh at loop.com>
Delivered-To: samba at samba.org
Received: from atlanticpearl.com (unknown [64.63.42.245]) by
lists.samba.org (Postfix) with SMTP id B34164586 for
<samba at samba.org>; Mon, 21 May 2001 13:19:36 -0700 (PDT)
Received: (qmail 902 invoked from network); 21 May 2001 20:03:05 -0000
Received: from (HELO ryoko.loop.com) () by hera.atlanticpearl.com with
SMTP; 21 May 2001 20:03:05 -0000
Message-Id: <5.0.2.1.0.20010521130629.00a8aee0 at pop.loop.com>
X-Sender: kourosh at pop.loop.com
X-Mailer: QUALCOMM Windows Eudora Version 5.0.2
Date: Mon, 21 May 2001 13:10:57 -0700
To: Jean-Marc Le Pape <jean-marc.lepape at ago.fr>, samba at samba.org
From: Kourosh Ghassemieh <kourosh at loop.com>
Subject: Re: Multiple mount to a same share
In-Reply-To: <3B093DA0.50BC8C80 at ago.fr>
References: <Pine.GSO.4.21.0105181324210.27981-100000 at mentos>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Jean-Marc,
Check to see if the machines have shortcuts that point to different
drives or if you have programs that point to different drives. I had
the same problem with several Win98 and NT machines mounting
a share multiple times as different drives. I traced it to a problem
with a program's shortcut. The program shortcut in the Start | Programs
menu pointed to one drive while the shortcut on the desktop
pointed to another drive. Apparently Windows would mount a
drive depending on which shortcut the user chose. When I fixed
the shortcuts to all point to the same drive it solved the problem.
Regards.
At 06:09 PM 5/21/2001 +0200, you wrote:
>Hello,
>
>I've got a curious problem :
>Nt 4 service pack 6a mount multiple time a same share. If the drive H: is
>use for the home directory after a time the user gets his home dir mounted
>on I, J, K,L, etc.. until Z.
>More curious a user sees the home dir of another user mounted many times
>over differents drives' letters.
>
>I didn't find answer nor in msdn neither in the winnt's registry.
>Did somebody have this problem ?
>
>Thanks.
>
>PS: I use samba 2.2.0 as PDC.
>JM
-
------------------------------------------------------------------------
Kourosh Ghassemieh
MindWare Information Systems & Technologies
9255 Sunset Blvd, Penthouse
West Hollywood CA 90069
(310) 729-1784
kourosh at loop.com
++++Networking Solutions for the Small Business++++
Return-Path: <dwcjr at inethouston.net>
Delivered-To: samba at us4.samba.org
Received: from leviathan.inethouston.net (216-118-21-146.pdq.net
[216.118.21.146]) by lists.samba.org (Postfix) with ESMTP id 9012E4B4A
for <samba at us4.samba.org>; Mon, 21 May 2001 14:18:09 -0700 (PDT)
Received: from dwcjr (DWCJR.inethouston.net [216.118.21.147]) by
leviathan.inethouston.net (Postfix) with ESMTP id 2776410F40F; Mon, 21
May 2001 16:18:51 -0500 (CDT)
Message-ID: <04f601c0e23b$a0268240$931576d8 at inethouston.net>
From: "David W. Chapman Jr." <dwcjr at inethouston.net>
To: "Jeremy Allison" <jeremy at valinux.com>
Cc: <samba at us4.samba.org>
References: <Pine.LNX.4.33.0105212358170.9193-100000 at uusikaupunki.net>
<3B09684E.4D01DBF5 at valinux.com>
Subject: Re: Samba 2.2.1
Date: Mon, 21 May 2001 16:18:48 -0500
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4522.1200
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I noticed a wierd problem with writes on samba that I cannot seem to figure
out and anyone who gets the initial information from me seems to drop off
the face of the earth afterwords(must be a conspiracy), but anyways. On
freebsd with win98se clients I have to disable raw writes to get any kind of
performance on writes, does this sound like a bug?
----- Original Message -----
From: "Jeremy Allison" <jeremy at valinux.com>
To: "Juha Auvinen" <ghost at uusikaupunki.net>
Cc: <samba-ntdom at lists.samba.org>
Sent: Monday, May 21, 2001 2:11 PM
Subject: Re: Samba 2.2.1
> Juha Auvinen wrote:
> >
> > There was some talk about samba 2.2.1 being released on last friday. Is
> > there an ETA on the 2.2.1 samba since it was not last friday?
>
> Not sure yet, still working on last minute bugs (as always...).
>
> Watch for announcements.
>
> Jeremy.
>
> --
> --------------------------------------------------------
> Buying an operating system without source is like buying
> a self-assembly Space Shuttle with no instructions.
> --------------------------------------------------------
>
Return-Path: <faxguy at deanox.com>
Delivered-To: samba at lists.samba.org
Received: from server.deanox.com (ns1.deanox.com [209.197.23.235]) by
lists.samba.org (Postfix) with ESMTP id 70F644BE3 for
<samba at lists.samba.org>; Mon, 21 May 2001 14:18:37 -0700 (PDT)
Received: from rygar.deanox.com (rygar.deanox.com [209.197.23.237]) by
server.deanox.com (8.9.3/8.8.7) with SMTP id PAA21197 for
<samba at lists.samba.org>; Mon, 21 May 2001 15:19:29 -0600
Message-Id: <3.0.6.32.20010521151950.01030330 at server.deanox.com>
X-Sender: faxguy at server.deanox.com
X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32)
Date: Mon, 21 May 2001 15:19:50 -0600
To: samba at lists.samba.org
From: Lee Howard <faxguy at deanox.com>
Subject: smbmount error after 2.2.0 upgrade
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I had been using samba-2.0.9 with Linux kernel-2.4.3 under which the
following command worked fine:
smbmount "\\\\host\share" /mnt/smb -o guest
After upgrading to samba-2.2.0, this command fails with this error:
smbfs: failed to load nls 'iso8859-1'
I didn't change the smb.conf file at all, so hopefully I didn't miss any
important changes there. Did the smbmount syntax change at all? The man
page doesn't seem to indicate it. I searched the samba mail archives and
couldn't find any references to this readily, so I hope that this isn't a
FAQ I missed. Could someone give me a pointer?
Shares on the Linux server function fine (except there was one instance
where [homes] share disappeared, reappearing after a "smb restart").
Thanks.
Lee Howard
Return-Path: <faxguy at deanox.com>
Delivered-To: samba at lists.samba.org
Received: from server.deanox.com (ns1.deanox.com [209.197.23.235]) by
lists.samba.org (Postfix) with ESMTP id DE4054CD2 for
<samba at lists.samba.org>; Mon, 21 May 2001 14:34:02 -0700 (PDT)
Received: from rygar.deanox.com (rygar.deanox.com [209.197.23.237]) by
server.deanox.com (8.9.3/8.8.7) with SMTP id PAA21455 for
<samba at lists.samba.org>; Mon, 21 May 2001 15:34:55 -0600
Message-Id: <3.0.6.32.20010521153515.0103c9c0 at server.deanox.com>
X-Sender: faxguy at server.deanox.com
X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32)
Date: Mon, 21 May 2001 15:35:15 -0600
To: samba at lists.samba.org
From: Lee Howard <faxguy at deanox.com>
Subject: Re: smbmount error after 2.2.0 upgrade
In-Reply-To: <3.0.6.32.20010521151950.01030330 at server.deanox.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
At 03:19 PM 5/21/01 -0600, Lee Howard wrote:
>I had been using samba-2.0.9 with Linux kernel-2.4.3 under which the
>following command worked fine:
>
>smbmount "\\\\host\share" /mnt/smb -o guest
>
>After upgrading to samba-2.2.0, this command fails with this error:
>
>smbfs: failed to load nls 'iso8859-1'
As a side-note, I do not get any errors after upgrading from 2.0.9 to 2.2.0
on a Linux system with kernel 2.2.19 (except for needing smbmnt in the
PATH) when performing this command:
smbmount "\\\\host\share" /mnt/smb -o password=my_password
Hmmm...
Lee Howard
Return-Path: <sabraham at exchange.webmd.net>
Delivered-To: samba at lists.samba.org
Received: from ns1.healtheon.com (ns1.healtheon.com [208.25.212.2]) by
lists.samba.org (Postfix) with ESMTP id 59CAF4C7B for
<samba at lists.samba.org>; Mon, 21 May 2001 15:08:31 -0700 (PDT)
Received: from mariner.healtheon.com (gate-hscape.healtheon.com
[208.25.212.6] (may be forged)) by ns1.healtheon.com (8.11.2/8.11.0)
with ESMTP id f4LM9O106363 for <samba at lists.samba.org>; Mon, 21 May
2001 15:09:24 -0700 (PDT)
Received: from sjcsaex001.na.webmd.net (sjcsaex001.na.webmd.net
[10.11.1.38]) by mariner.healtheon.com (8.9.1/8.9.1) with ESMTP id
PAA02725 for <samba at lists.samba.org>; Mon, 21 May 2001 15:09:24 -0700
(PDT)
Received: by sjcsaex001.na.webmd.net with Internet Mail Service
(5.5.2650.21) id <K67ZAMK9>; Mon, 21 May 2001 15:08:23 -0700
Message-ID: <40B778D85A72D411B8CF00508B62C0B902C8C8CB at sjcsaex001.na.webm
d.net>
From: "Abraham, Suraj" <sabraham at exchange.webmd.net>
To: samba at lists.samba.org
Subject: net view fails
Date: Mon, 21 May 2001 15:08:22 -0700
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2650.21)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi
My net view command fails with the following errors....
c:\WINNT\system 32> net view fangio
Sytem error 1727 has occurred.
The remote procedure call failed and did not execute.
Samba version 2.0.0 is running on a Solaris box. The smb.conf looks like
this
$ more smb.conf
# Samba config file created using SWAT
# from UNKNOWN (10.4.1.144)
# Date: 2001/05/21 14:49:39
# Global parameters
workgroup = CS
server string = ClearCase View Server (Samba)
security = DOMAIN
encrypt passwords = Yes
password server = saturn
log file = /usr/local/samba/var/log.%m
max log size = 50
local master = No
dns proxy = No
wins server = 10.11.1.63
[test]
comment = Testing
path = /usr/local/samba/test
guest ok = Yes
Any help will be appreciated.
Thanks
Suraj
Return-Path: <mharding at ecwebworks.com>
Delivered-To: samba at lists.samba.org
Received: from sxsmb01.ecwebworks.com (fw-3310.ecwebworks.com
[207.176.181.130]) by lists.samba.org (Postfix) with ESMTP id
D9F754BDA; Mon, 21 May 2001 15:19:09 -0700 (PDT)
Received: from ec001.ecwebworks.com (ec-101-001.ecwebworks.com
[192.168.101.1] (may be forged)) by sxsmb01.ecwebworks.com
(8.9.3/8.9.3) with ESMTP id PAA01702; Mon, 21 May 2001 15:46:12 -0400
Message-Id: <5.1.0.14.2.20010521154130.00b0eab0 at mail.ecwebworks.com>
X-Sender: mharding at mail.ecwebworks.com
X-Mailer: QUALCOMM Windows Eudora Version 5.1
Date: Mon, 21 May 2001 15:46:10 -0400
To: samba-ntdom at lists.samba.org, samba at lists.samba.org
From: Marc Harding <mharding at ecwebworks.com>
Subject: Profiles with Win2k SP2
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"; format=flowed
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I have a strange problem... I have a couple users who are connected to a
Windows 2000 Advanced Server (Machine and User Accounts), however their
Home Drive, Profile and logon script are all pointed to shares on a samba
pre-2.2.1 (today's CVS, needed for other profile problems). After doing to
Service Pack 2 on their machine, they can no longer download their profiles
or get a logon script although it appears that they have full access to
their home drive, and can map to the netlogon share. Does anyone have any
ideas or need more information to help me out. All of this was working
before Service Pack 2. I also upgraded the Service Pack on the Server as
well to see if that would help with no luck.
Thanks,
Marc Harding.
Return-Path: <jeremy at valinux.com>
Delivered-To: samba at lists.samba.org
Received: from mail.valinux.com (mail.valinux.com [198.186.202.175]) by
lists.samba.org (Postfix) with ESMTP id B7D764CCB; Mon, 21 May 2001
15:24:37 -0700 (PDT)
Received: from legion.hdqt.valinux.com ([10.6.11.17] helo=valinux.com
ident=jeremy) by mail.valinux.com with esmtp (Cipher
SSLv3:RC4-MD5:128) (Exim 3.22 #1 (Debian)) id 151y7A-0003Rx-00; Mon,
21 May 2001 15:25:24 -0700
Message-ID: <3B0979CF.EA05142A at valinux.com>
Date: Mon, 21 May 2001 16:25:51 -0400
From: Jeremy Allison <jeremy at valinux.com>
Organization: VA Linux Systems
X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.13-0.7 i686)
X-Accept-Language: en
MIME-Version: 1.0
To: Marc Harding <mharding at ecwebworks.com>
Cc: samba-ntdom at lists.samba.org, samba at lists.samba.org
Subject: Re: Profiles with Win2k SP2
References: <5.1.0.14.2.20010521154130.00b0eab0 at mail.ecwebworks.com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Marc Harding wrote:
>
> I have a strange problem... I have a couple users who are connected to a
> Windows 2000 Advanced Server (Machine and User Accounts), however their
> Home Drive, Profile and logon script are all pointed to shares on a samba
> pre-2.2.1 (today's CVS, needed for other profile problems). After doing to
> Service Pack 2 on their machine, they can no longer download their profiles
> or get a logon script although it appears that they have full access to
> their home drive, and can map to the netlogon share. Does anyone have any
> ideas or need more information to help me out. All of this was working
> before Service Pack 2. I also upgraded the Service Pack on the Server as
> well to see if that would help with no luck.
Yes, can you get me a debug level 10 log of one of their
attempts at downloading a profile ? What error message
do they get ?
Jeremy.
--
--------------------------------------------------------
Buying an operating system without source is like buying
a self-assembly Space Shuttle with no instructions.
--------------------------------------------------------
Return-Path: <faxguy at deanox.com>
Delivered-To: samba at lists.samba.org
Received: from server.deanox.com (ns1.deanox.com [209.197.23.235]) by
lists.samba.org (Postfix) with ESMTP id 565D44225 for
<samba at lists.samba.org>; Mon, 21 May 2001 16:38:10 -0700 (PDT)
Received: from rygar.deanox.com (rygar.deanox.com [209.197.23.237]) by
server.deanox.com (8.9.3/8.8.7) with SMTP id RAA23288 for
<samba at lists.samba.org>; Mon, 21 May 2001 17:39:02 -0600
Message-Id: <3.0.6.32.20010521173923.00b82560 at server.deanox.com>
X-Sender: faxguy at server.deanox.com
X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32)
Date: Mon, 21 May 2001 17:39:23 -0600
To: samba at lists.samba.org
From: Lee Howard <faxguy at deanox.com>
Subject: Re: smbmount error after 2.2.0 upgrade
In-Reply-To: <3.0.6.32.20010521153515.0103c9c0 at server.deanox.com>
References: <3.0.6.32.20010521151950.01030330 at server.deanox.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
At 03:35 PM 5/21/01 -0600, Lee Howard wrote:
>At 03:19 PM 5/21/01 -0600, Lee Howard wrote:
>>I had been using samba-2.0.9 with Linux kernel-2.4.3 under which the
>>following command worked fine:
>>
>>smbmount "\\\\host\share" /mnt/smb -o guest
>>
>>After upgrading to samba-2.2.0, this command fails with this error:
>>
>>smbfs: failed to load nls 'iso8859-1'
Here's the corresponding kernel messages:
May 21 14:49:34 system modprobe: modprobe: Can't locate module nls_iso8859-1
May 21 14:49:34 system mount.smbfs[5985]: [2001/05/21 14:49:34, 0]
client/smbmount.c:send_fs_socket(381)
May 21 14:49:34 system mount.smbfs[5985]: mount.smbfs: entering daemon
mode for service \\host\share, pid=5985
May 21 14:49:34 system kernel: smbfs: failed to load nls 'iso8859-1'
It seems obvious that it's erroring because of the missing module. I'm not
sure where to compile this module, however. Help?
Thanks.
Lee Howard
Return-Path: <gcarter at valinux.com>
Delivered-To: samba at samba.org
Received: from mail.valinux.com (mail.valinux.com [198.186.202.175]) by
lists.samba.org (Postfix) with ESMTP id 37D1A46B2; Fri, 18 May 2001
09:39:49 -0700 (PDT)
Received: from beefcake.hdqt.valinux.com ([10.1.0.14] helo=localhost
ident=root) by mail.valinux.com with smtp (Exim 3.22 #1 (Debian)) id
150nJ1-00074L-00; Fri, 18 May 2001 09:40:47 -0700
Date: Fri, 18 May 2001 11:43:56 -0500
From: Gerald Carter <gcarter at valinux.com>
To: thomas.meinke at gmx.de
Cc: samba-technical at samba.org
Subject: Re: Samba 2.2.0 and Windows 2000 with Service Pack 2
Message-ID: <20010518114356.F21872 at queso.plainjoe.org>
References: <01051718241002.00442 at pebbles>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
In-Reply-To: <01051718241002.00442 at pebbles>; from thomas.meinke at gmx.de
on Thu, May 17, 2001 at 11:24:10 -0500
X-Mailer: Balsa 1.1.4
Content-Length: 2077
Lines: 57
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Moved to samba-technical....
Thomas,
I am unable to reptoduce this using the English
version of Windows 2000. Can you provide us with
level 10 debug logs? Maybe post them on an FTP site
were we can grab them?
If worse comes to worse, I can install a german
version of Win2k and try to reproduce it there.....
Cheers, jerry
On Thu, 17 May 2001 11:24:10 Thomas Meinke wrote:
>
> Hello!
>
> I am running Samba 2.2.0 und Suse 7.1, and CUPS 1.1.5
> it still works fine with no problems. But today I
> installed the Service Pack 2 for Windows 2000,
> and what should I say. I can not access the printers.
> When I try to print something I got the error message:
> (I translated it from German, may be the error message
> is not exactly the same in English)
> The printer is not accessible.
>
> Then I deleted the printer on the Windows 2000 system,
> and tried to install it again, but now I get the following
> error message:
>
> The choosen printer driver is either not compatible to
> the actual Windows-Version or not available. Choose another
> driver, or contact the administrator for further help.
>
> But the printer driver is the right one for Windows 2000,
> and the driver works still fine until the Service Pack 2
> was installed. All the other Workstation in the networtk
> with Windows 98/Me and Windows 2000 (Service Pack 1) still
> are able to print on the server. A test on a second
> machine have the same result, after the installation of
> Service Pack 2 the printers are not longer avaiable.
>
> Has another one the same problems?
----------------------------------------------------------------------
/\ Gerald (Jerry) Carter Professional Services
\/ http://www.valinux.com/ VA Linux Systems gcarter at valinux.com
http://www.samba.org/ SAMBA Team jerry at samba.org
http://www.plainjoe.org/ jerry at plainjoe.org
"...a hundred billion castaways looking for a home."
- Sting "Message in a Bottle" ( 1979 )
Return-Path: <faxguy at deanox.com>
Delivered-To: samba at lists.samba.org
Received: from server.deanox.com (ns1.deanox.com [209.197.23.235]) by
lists.samba.org (Postfix) with ESMTP id E98D64D80 for
<samba at lists.samba.org>; Mon, 21 May 2001 17:22:00 -0700 (PDT)
Received: from rygar.deanox.com (rygar.deanox.com [209.197.23.237]) by
server.deanox.com (8.9.3/8.8.7) with SMTP id SAA23679 for
<samba at lists.samba.org>; Mon, 21 May 2001 18:22:52 -0600
Message-Id: <3.0.6.32.20010521182313.00b816d0 at server.deanox.com>
X-Sender: faxguy at server.deanox.com
X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32)
Date: Mon, 21 May 2001 18:23:13 -0600
To: samba at lists.samba.org
From: Lee Howard <faxguy at deanox.com>
Subject: Re: smbmount error after 2.2.0 upgrade
In-Reply-To: <3.0.6.32.20010521173923.00b82560 at server.deanox.com>
References: <3.0.6.32.20010521153515.0103c9c0 at server.deanox.com>
<3.0.6.32.20010521151950.01030330 at server.deanox.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
At 05:39 PM 5/21/01 -0600, Lee Howard wrote:
>At 03:35 PM 5/21/01 -0600, Lee Howard wrote:
>>At 03:19 PM 5/21/01 -0600, Lee Howard wrote:
>>>I had been using samba-2.0.9 with Linux kernel-2.4.3 under which the
>>>following command worked fine:
>>>
>>>smbmount "\\\\host\share" /mnt/smb -o guest
>>>
>>>After upgrading to samba-2.2.0, this command fails with this error:
>>>
>>>smbfs: failed to load nls 'iso8859-1'
>
>Here's the corresponding kernel messages:
>
>May 21 14:49:34 system modprobe: modprobe: Can't locate module nls_iso8859-1
>May 21 14:49:34 system mount.smbfs[5985]: [2001/05/21 14:49:34, 0]
>client/smbmount.c:send_fs_socket(381)
>May 21 14:49:34 system mount.smbfs[5985]: mount.smbfs: entering daemon
>mode for service \\host\share, pid=5985
>May 21 14:49:34 system kernel: smbfs: failed to load nls 'iso8859-1'
>
>It seems obvious that it's erroring because of the missing module. I'm not
>sure where to compile this module, however. Help?
It's a "native language support" module. After compiling it, all is well.
Confusing.
Lee.
Return-Path: <nailed at videotron.ca>
Delivered-To: samba at samba.org
Received: from VL-MS-MR001.sc1.videotron.ca (relais.videotron.ca
[24.201.245.36]) by lists.samba.org (Postfix) with ESMTP id 287844E58
for <samba at samba.org>; Mon, 21 May 2001 19:15:37 -0700 (PDT)
Received: from alain ([24.201.143.34]) by VL-MS-MR001.sc1.videotron.ca
(Netscape Messaging Server 4.15) with SMTP id GDPSVB02.TV5; Mon, 21
May 2001 22:13:59 -0400
Content-Type: text/plain; charset="iso-8859-1"
From: Alain Toussaint <nailed at videotron.ca>
To: "Dietrich, Mary Jo (CFST)" <MDietrich at NA2.US.ML.com>,
"'samba at samba.org'" <samba at samba.org>
Subject: Re: Samba & SunOs
Date: Mon, 21 May 2001 22:13:53 -0400
X-Mailer: KMail [version 1.2]
References: <AB15E2A4ED98D111A97F0004AC613C7901CC428D at edv304.na2.us.ml.c
om>
In-Reply-To: <
=?utf-8?q?AB15E2A4ED98D111A97F0004AC613C7901CC428D=40edv304=2Ena2=2Eus
=2E?= =?utf-8?q?ml=2Ec
Message-Id: <20010522021537.287844E58 at lists.samba.org>
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
=20?= om>
MIME-Version: 1.0
Message-Id: <01052122135300.21536 at alain>
Content-Transfer-Encoding: 8bit
> Looking for Samba version that runs on SunOs 4.X. HELP????????
do you have a C compiler on that box ??
if yes,then you can download either Samba 2.2.0 (if you need PDC
support for NT) at:
http://us4.samba.org/samba/ftp/samba-2.2.0.tar.gz
or Samba 2.0.9 (basic filesharing) at:
http://us4.samba.org/samba/ftp/samba-2.0.9.tar.gz
but you need to compile them as the only Samba available for Sun boxes
at the moment is version 2.0.7 for Solaris.
Return-Path: <nailed at videotron.ca>
Delivered-To: samba at samba.org
Received: from VL-MS-MR002.sc1.videotron.ca (relais.videotron.ca
[24.201.245.36]) by lists.samba.org (Postfix) with ESMTP id 456B74E71
for <samba at samba.org>; Mon, 21 May 2001 19:33:28 -0700 (PDT)
Received: from alain ([24.201.143.34]) by VL-MS-MR002.sc1.videotron.ca
(Netscape Messaging Server 4.15) with SMTP id GDPT3302.A11 for
<samba at samba.org>; Mon, 21 May 2001 22:18:39 -0400
Content-Type: text/plain; charset="iso-8859-1"
From: Alain Toussaint <nailed at videotron.ca>
To: samba at samba.org
Subject: Re: Samba Server problem
Date: Mon, 21 May 2001 22:18:39 -0400
X-Mailer: KMail [version 1.2]
References: <OE53K8ZtP0kvdIBirXX00004d1e at hotmail.com>
<20010521075856.U4183 at erlm.siemens.de>
In-Reply-To: <20010521075856.U4183 at erlm.siemens.de>
MIME-Version: 1.0
Message-Id: <01052122183901.21536 at alain>
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
> if you use the 2.2.0-rpm
^^^^^^^^
there's rpm for Solaris ??
Alain
Return-Path: <mark at mcs.vuw.ac.nz>
Delivered-To: samba at lists.samba.org
Received: from kaukau.mcs.vuw.ac.nz (kaukau.mcs.vuw.ac.nz
[130.195.5.20]) by lists.samba.org (Postfix) with ESMTP id C47B2486E
for <samba at lists.samba.org>; Mon, 21 May 2001 20:02:18 -0700 (PDT)
Received: from city-art.mcs.vuw.ac.nz (city-art.mcs.vuw.ac.nz
[130.195.5.88]) by kaukau.mcs.vuw.ac.nz (8.11.3/8.11.3) with ESMTP id
f4M33As17864 for <samba at lists.samba.org>; Tue, 22 May 2001 15:03:10
+1200 (NZST)
From: Mark Davies <mark at mcs.vuw.ac.nz>
Received: from mcs.vuw.ac.nz (localhost [[UNIX: localhost]]) by
city-art.mcs.vuw.ac.nz (8.11.3/8.11.1) with ESMTP id f4M339D10186 for
<samba at lists.samba.org>; Tue, 22 May 2001 15:03:10 +1200 (NZST)
Message-Id: <200105220303.f4M339D10186 at city-art.mcs.vuw.ac.nz>
X-Mailer: exmh version 2.2 06/23/2000 with nmh-1.0.4
To: samba at lists.samba.org
Subject: Samba, Win2K and print to file
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Date: Tue, 22 May 2001 15:03:09 +1200
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
If I try to "Print to file" from a Win2K terminal server box to a file in a
samba filesystem it fails whereas if I do the exact same thing from an NT4 TS
box it works. Normal application file access to this filesystem works in both
cases. This is with 2.2 on NetBSD but I have also confirmed it happening with
2.0.9 on NetBSD and 2.0.7 on Tru64 UNIX.
Below is a trace of the network traffic for both the win2k failed case and the
nt4 successful case. In both cases it seems to go to an awful lot of work
just to do a write to file. Can anybody point out whats going wrong in the
Win2K case? The full tcpdump trace files are available from
http://www.mcs.vuw.ac.nz/~mark/smb-trace.tar.gz
for those who want to look at the details of the packets.
Win2k:
No. Time Source Destination Protocol Info
1 0.000000 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_FS_INFORMATION Request
2 0.002573 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_QUERY_FS_INFORMATION response
3 0.004158 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
4 0.032715 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
5 0.041839 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcancel Request
6 0.042886 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBnttransact Response
7 0.043196 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBclose Request
8 0.044933 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBclose Response
9 0.048666 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
10 0.052008 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
11 0.052377 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 Request
12 0.059376 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 response
13 0.064258 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcreateX Request
14 0.070654 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBntcreateX Response
15 0.071811 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
16 0.072768 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz TCP netbios-ssn > 3120 [ACK] Seq=1934565827 Ack=1860373977 Win=17520 Len=0
17 0.126508 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_FS_INFORMATION Request
18 0.128679 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_QUERY_FS_INFORMATION response
19 0.130187 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcreateX Request
20 0.146813 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBntcreateX Response
21 0.148449 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBclose Request
22 0.150241 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBclose Response
23 0.153492 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBunlink Request
24 0.184342 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBnttransact Response
25 0.185321 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBunlink Response
26 0.186544 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz TCP 3120 > netbios-ssn [ACK] Seq=1860374247 Ack=1934566169 Win=17260 Len=0
27 0.194166 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 Request
28 0.194556 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
29 0.194582 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz TCP netbios-ssn > 3120 [ACK] Seq=1934566169 Ack=1860374423 Win=17432 Len=0
30 0.363093 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 response
31 0.365108 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 Request
32 0.374338 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 response
33 0.380564 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 Request
34 0.387359 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 response
35 0.387786 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
36 0.388190 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
37 0.388215 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz TCP netbios-ssn > 3120 [ACK] Seq=1934566417 Ack=1860374790 Win=17431 Len=0
38 0.388647 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_FS_INFORMATION Request
39 0.395394 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
40 0.397787 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_QUERY_FS_INFORMATION response
41 0.398007 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz TCP 3120 > netbios-ssn [ACK] Seq=1860374864 Ack=1934566538 Win=16891 Len=0
42 0.399171 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_FS_INFORMATION Request
43 0.401343 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_QUERY_FS_INFORMATION response
44 0.402155 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 Request
45 0.402899 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
46 0.402927 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz TCP netbios-ssn > 3120 [ACK] Seq=1934566620 Ack=1860375117 Win=17431 Len=0
47 0.410271 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 response
48 0.415526 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
49 0.415699 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz TCP 3120 > netbios-ssn [ACK] Seq=1860375117 Ack=1934567033 Win=16396 Len=0
50 0.416920 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_FS_INFORMATION Request
51 0.419775 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_QUERY_FS_INFORMATION response
52 0.422555 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 Request
53 0.472823 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz TCP netbios-ssn > 3120 [ACK] Seq=1934567115 Ack=1860375279 Win=17520 Len=0
54 0.589712 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 response
55 0.590990 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
56 0.595869 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
57 0.598909 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcancel Request
58 0.599951 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBnttransact Response
59 0.601156 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcancel Request
60 0.602274 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBnttransact Response
61 0.602857 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBclose Request
62 0.604613 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBclose Response
63 0.609342 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
64 0.613989 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
65 0.617877 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
66 0.622971 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
67 0.649131 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcreateX Request
68 0.655121 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBntcreateX Response
69 0.655989 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcreateX Request
70 0.666240 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBntcreateX Response
71 0.666858 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBclose Request
72 0.668662 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBclose Response
73 0.668826 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBunlink Request
74 0.672409 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBunlink Response
75 0.673117 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcreateX Request
76 0.680657 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBntcreateX Response
77 0.683350 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcreateX Request
78 0.693203 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBntcreateX Response
79 0.693660 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBclose Request
80 0.695576 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBclose Response
81 0.695819 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBunlink Request
82 0.699113 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBunlink Response
83 0.699798 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcreateX Request
84 0.706762 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBntcreateX Response
85 0.707113 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcreateX Request
86 0.718770 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBntcreateX Response
87 0.719525 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBclose Request
88 0.721398 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBclose Response
89 0.722163 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBunlink Request
90 0.725512 turakirae.mcs.vuw.ac.nz matiu.mcs.vuw.ac.nz SMB SMBunlink Response
91 0.836995 matiu.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz TCP 3120 > netbios-ssn [ACK] Seq=1860376553 Ack=1934568263 Win=16656 Len=0
NT4:
No. Time Source Destination Protocol Info
1 0.000000 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBecho Request
2 0.005395 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBecho Response
3 0.109878 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz TCP 3002 > netbios-ssn [ACK] Seq=177548 Ack=525714536 Win=7347 Len=0
4 2.067319 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_FILE_INFORMATION Request
5 2.080893 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_FILE_INFORMATION response
6 2.081486 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
7 2.098546 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
8 2.160415 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcancel Request
9 2.165890 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
10 2.166149 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBclose Request
11 2.166242 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz TCP netbios-ssn > 3002 [ACK] Seq=525714722 Ack=177794 Win=17474 Len=0
12 2.174299 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBclose Response
13 2.177138 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBchkpth Request
14 2.184587 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBchkpth Response
15 2.184800 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_FILE_INFORMATION Request
16 2.197657 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_FILE_INFORMATION response
17 2.197857 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 Request
18 2.223070 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 response
19 2.223310 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcreateX Request
20 2.270756 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBntcreateX Response
21 2.270941 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBfindclose2 Request
22 2.278331 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBfindclose2 Response
23 2.278493 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBclose Request
24 2.286174 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBclose Response
25 2.286342 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcreateX Request
26 2.312618 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBntcreateX Response
27 2.312793 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBunlink Request
28 2.325585 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBunlink Response
29 2.325754 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
30 2.366363 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz TCP netbios-ssn > 3002 [ACK] Seq=525715577 Ack=178418 Win=17520 Len=0
31 2.366534 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 Request
32 2.566340 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz TCP netbios-ssn > 3002 [ACK] Seq=525715577 Ack=178506 Win=17520 Len=0
33 3.019419 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 response
34 3.020113 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 Request
35 3.045599 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 response
36 3.046992 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
37 3.060209 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
38 3.072542 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_FILE_INFORMATION Request
39 3.084308 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_FILE_INFORMATION response
40 3.084790 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
41 3.103695 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
42 3.104147 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_FILE_INFORMATION Request
43 3.116731 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_FILE_INFORMATION response
44 3.117165 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
45 3.129598 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
46 3.136396 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 Request
47 3.166299 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz TCP netbios-ssn > 3002 [ACK] Seq=525716173 Ack=179094 Win=17520 Len=0
48 3.785826 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_FIND_FIRST2 response
49 3.787055 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
50 3.805374 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
51 3.805768 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
52 3.817870 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
53 3.824323 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcancel Request
54 3.829986 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
55 3.830250 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBclose Request
56 3.838280 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBclose Response
57 3.884674 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBchkpth Request
58 3.892256 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBchkpth Response
59 3.892842 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcreateX Request
60 3.918044 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBntcreateX Response
61 3.918276 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
62 3.932563 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
63 3.932813 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
64 3.945111 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
65 3.945803 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
66 3.959287 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
67 3.959638 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
68 3.966322 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz TCP netbios-ssn > 3002 [ACK] Seq=525716861 Ack=179838 Win=17520 Len=0
69 3.978043 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
70 3.978337 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
71 3.990636 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
72 3.990948 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
73 4.004238 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
74 4.004540 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
75 4.016909 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
76 4.017138 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
77 4.030518 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
78 4.031219 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
79 4.044367 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
80 4.047870 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
81 4.060332 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
82 4.062274 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
83 4.075492 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
84 4.075742 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
85 4.088359 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
86 4.089030 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
87 4.102220 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
88 4.102556 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
89 4.120753 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
90 4.121032 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
91 4.133368 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
92 4.133680 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
93 4.146919 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
94 4.147221 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
95 4.159667 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
96 4.159890 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
97 4.166243 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz TCP netbios-ssn > 3002 [ACK] Seq=525717533 Ack=181059 Win=17520 Len=0
98 4.173372 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
99 4.174027 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
100 4.187226 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
101 4.190976 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
102 4.204150 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
103 4.303003 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
104 4.316416 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
105 4.316682 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
106 4.329038 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
107 4.329468 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcreateX Request
108 4.363441 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBntcreateX Response
109 4.363849 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBclose Request
110 4.366343 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz TCP netbios-ssn > 3002 [ACK] Seq=525717835 Ack=181555 Win=17520 Len=0
111 4.372574 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBclose Response
112 4.421276 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcreateX Request
113 4.452142 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBntcreateX Response
114 4.452530 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBclose Request
115 4.460288 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBclose Response
116 4.530612 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBntcreateX Request
117 4.561620 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBntcreateX Response
118 4.561987 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBwrite Request
119 4.566173 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz TCP netbios-ssn > 3002 [ACK] Seq=525718127 Ack=181849 Win=17520 Len=0
120 4.569822 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBwrite Response
121 4.570321 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_SET_FILE_INFORMATION Request
122 4.582957 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_SET_FILE_INFORMATION response
123 4.716320 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz TCP 3002 > netbios-ssn [ACK] Seq=181937 Ack=525718232 Win=8061 Len=0
124 4.889761 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
125 4.902052 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
126 4.902443 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_FILE_INFORMATION Request
127 4.915075 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_FILE_INFORMATION response
128 4.915414 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
129 4.927875 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
130 4.928202 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
131 4.941584 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
132 4.943090 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
133 4.955524 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
134 4.955752 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
135 4.966339 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz TCP netbios-ssn > 3002 [ACK] Seq=525718523 Ack=182447 Win=17520 Len=0
136 4.970299 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
137 4.970970 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
138 4.984219 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
139 4.988820 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
140 5.001120 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
141 5.004116 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
142 5.017618 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
143 5.036596 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBnttransact Request
144 5.048884 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBnttransact Response
145 5.049286 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION Request
146 5.062585 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB TRANS2_QUERY_PATH_INFORMATION response
147 5.168186 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBwriteX Request
148 5.168250 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz NBSS NBSS Continuation Message
149 5.168325 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz TCP netbios-ssn > 3002 [ACK] Seq=525718883 Ack=185053 Win=15340 Len=0
150 5.191282 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBwriteX Response
151 5.191524 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBflush Request
152 5.197387 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBflush Response
153 5.197761 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz SMB SMBclose Request
154 5.246137 turakirae.mcs.vuw.ac.nz somes.mcs.vuw.ac.nz SMB SMBclose Response
155 5.417282 somes.mcs.vuw.ac.nz turakirae.mcs.vuw.ac.nz TCP 3002 > netbios-ssn [ACK] Seq=185140 Ack=525719012 Win=8760 Len=0
cheers
mark
Return-Path: <devik at cdi.cz>
Delivered-To: samba at lists.samba.org
Received: from luxik.cdi.cz (s254-n148.tele2.cz [212.65.254.148]) by
lists.samba.org (Postfix) with ESMTP id 9A28245CD for
<samba at lists.samba.org>; Mon, 21 May 2001 23:51:30 -0700 (PDT)
Received: from localhost (devik at localhost) by luxik.cdi.cz
(8.11.0/8.7.3) with ESMTP id f4M6ucO10525 for <samba at lists.samba.org>;
Tue, 22 May 2001 08:56:39 +0200
Posted-Date: Tue, 22 May 2001 08:56:39 +0200
Date: Tue, 22 May 2001 08:56:38 +0200 (CEST)
From: Martin Devera <devik at cdi.cz>
To: samba at lists.samba.org
Subject: new FAQ offer
Message-ID: <Pine.LNX.4.10.10105211620210.32397-100000 at luxik.cdi.cz>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hello,
I had a big problem with both samba 2.0.9 and 2.2.0 and windows 2000.
win2000final was not able to connect and win2000beta was working
ok with 2.0.x and freezing often with 2.2.0.
Later I realized that it was due to open port 445 on samba host. When
win2000 detects open 445 (MS DS) on host where samba resides it changes
its behaviour fundamentaly.
I hope this information could help someone. If you want more
info, email me directly please.
devik
Return-Path: <benjamin.grogg at hta-bi.bfh.ch>
Delivered-To: samba at lists.samba.org
Received: from ns2.hta-bi.bfh.ch (ns2.hta-bi.bfh.ch [147.87.1.2]) by
lists.samba.org (Postfix) with ESMTP id 33FDD4ED9 for
<samba at lists.samba.org>; Tue, 22 May 2001 00:06:10 -0700 (PDT)
Received: from hta-bi.bfh.ch (extra.hta-bi.bfh.ch [147.87.65.240]) by
ns2.hta-bi.bfh.ch (8.10.1/8.10.1) with ESMTP id f4M771d20509 for
<samba at lists.samba.org>; Tue, 22 May 2001 09:07:02 +0200 (MET DST)
Received: from hta-bi.bfh.ch [147.87.65.116] by hta-bi.bfh.ch with
Novonyx SMTP Server $Revision: 2.74 $; Tue, 22 May 2001 09:07:49
+0100 (MEST)
Message-ID: <3B0A1044.79F4C64A at hta-bi.bfh.ch>
Date: Tue, 22 May 2001 09:07:48 +0200
From: Benjamin Grogg <benjamin.grogg at hta-bi.bfh.ch>
Organization: Biel School of Engineering and Architecture
X-Mailer: Mozilla 4.77 [en] (WinNT; U)
X-Accept-Language: en
MIME-Version: 1.0
To: samba at lists.samba.org
Subject: SuSE 7.1 and Samba 2.2.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi List
I update Samba 2.0.7 to 2.2.0. I use the following parameters :
./configure --bindir=/usr/bin --sbindir=/usr/sbin --with-sbmount
--with-privatedir=/etc/private --libdir=/etc --localstatedir=/var/log
--with-lockdir=/var/lock/samba
Well it dosen't works because Samba find not the /etc/smb.conf (Error :
255) But samba.conf ist in /etc. And Samba 2.0.7 works great.
Whats wrong? Anybody have the SuSE 7.1 parameters?
Greet's and thanks!
Benny
Return-Path: <urban at teststation.com>
Delivered-To: samba at lists.samba.org
Received: from fungus.svenskatest.se (fungus.teststation.com
[212.32.186.211]) by lists.samba.org (Postfix) with ESMTP id C7EFD4F3B
for <samba at lists.samba.org>; Tue, 22 May 2001 01:01:45 -0700 (PDT)
Received: from fw.teststation.com (srvfwume.svenskatest.se
[212.32.186.210]) by fungus.svenskatest.se (8.9.3/8.9.3) with SMTP id
KAA29311; Tue, 22 May 2001 10:02:23 +0200 (MET DST)
Received: from COLA by fw.teststation.com via smtpd (for
fungus.teststation.com [212.32.186.211]) with SMTP; 22 May 2001
07:38:47 UT
Date: Tue, 22 May 2001 10:02:08 +0200 (CEST)
From: Urban Widmark <urban at teststation.com>
X-Sender: <puw at cola.teststation.com>
To: Lee Howard <faxguy at deanox.com>
Cc: <samba at lists.samba.org>
Subject: Re: smbmount error after 2.2.0 upgrade
In-Reply-To: <3.0.6.32.20010521182313.00b816d0 at server.deanox.com>
Message-ID: <Pine.LNX.4.30.0105220954300.15837-100000 at cola.teststation.c
om>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Mon, 21 May 2001, Lee Howard wrote:
> >Here's the corresponding kernel messages:
> >
> >May 21 14:49:34 system modprobe: modprobe: Can't locate module nls_iso8859-1
> >May 21 14:49:34 system mount.smbfs[5985]: [2001/05/21 14:49:34, 0]
> >client/smbmount.c:send_fs_socket(381)
> >May 21 14:49:34 system mount.smbfs[5985]: mount.smbfs: entering daemon
> >mode for service \\host\share, pid=5985
> >May 21 14:49:34 system kernel: smbfs: failed to load nls 'iso8859-1'
> >
> >It seems obvious that it's erroring because of the missing module. I'm not
> >sure where to compile this module, however. Help?
>
> It's a "native language support" module. After compiling it, all is well.
> Confusing.
You have specified when configuring the kernel that you want NLS support
in smbfs and probably given it iso8859-1 as the default. It tries to load
it but can't find it, so it complains. samba 2.0.7 or 2.2.0 shouldn't
matter, I think you changed something else too (like a kernel recompile).
"failed to load nls" shouldn't be fatal, it should still mount the
filesystem.
/Urban
Return-Path: <jakob.reuter at wimmex.com>
Delivered-To: samba at lists.samba.org
Received: from moutvdom00.kundenserver.de (moutvdom00.kundenserver.de
[195.20.224.149]) by lists.samba.org (Postfix) with ESMTP id 5E6344EF5
for <samba at lists.samba.org>; Tue, 22 May 2001 01:21:11 -0700 (PDT)
Received: from [195.20.224.220] (helo=mrvdom04.kundenserver.de) by
moutvdom00.kundenserver.de with esmtp (Exim 2.12 #2) id
1527QY-0001Pq-00 for samba at lists.samba.org; Tue, 22 May 2001 10:22:02
+0200
Received: from pc19eacb2.dip.t-dialin.net ([193.158.172.178]
helo=server) by mrvdom04.kundenserver.de with smtp (Exim 2.12 #2) id
1527PO-00068j-00 for samba at lists.samba.org; Tue, 22 May 2001 10:20:50
+0200
From: "Jakob" <jakob.reuter at wimmex.com>
To: "Samba" <samba at lists.samba.org>
Subject: Broken Pipe
Date: Fri, 22 Jun 2001 10:18:59 +0200
Message-ID: <000001c0faf3$fd3cefc0$6400a8c0 at server.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi
i am using samba 2.2 on SuSe Linux 7.1 and having trouble... win98se
clients take soemtimes 10sec to connect
shares, sometimes the don4t connect, sometimes connection is fine. (users
are not very satisfied :\)
Squid is also running and works perfect. When looking at the log file there
appears something like "broken pipe".
I will send the log file if needed. (I am at home) I am pretty shure the
smb.conf is ok it worked on my suse 6.3 box running
samba 2.0.5a fine.
best regards
jakob
Return-Path: <ad at ordix.de>
Delivered-To: samba at lists.samba.org
Received: from gw.ordix.de (gw.ordix.de [212.218.179.18]) by
lists.samba.org (Postfix) with ESMTP id CEA7944BA; Tue, 22 May 2001
02:11:50 -0700 (PDT)
Received: from ordix.de (asteroid.ordix.de [192.168.7.11]) by
gw.ordix.de (8.9.3/8.9.3) with ESMTP id LAA05658; Tue, 22 May 2001
11:12:41 +0200
Message-ID: <3B0A2D82.9E08677A at ordix.de>
Date: Tue, 22 May 2001 11:12:34 +0200
From: Andre Dirr <ad at ordix.de>
Organization: ORDIX AG
X-Mailer: Mozilla 4.77 [en] (WinNT; U)
X-Accept-Language: de,en
MIME-Version: 1.0
To: samba-ntdom <samba-ntdom at lists.samba.org>, samba
<samba at lists.samba.org>
Subject: samba 2.2.0 with quota
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
hallo,
i use samba2.2.0 with quota. i use a winnt4 workstation to connect to
the server. everything works fine, but i wonder how i can check my quota
from the nt machine. is it possible yet? how?
thanks for answers,
andy
Return-Path: <9Mager at uppingham.co.uk>
Delivered-To: samba at lists.samba.org
Received: from intsrv (mail.uppingham.co.uk [195.59.103.130]) by
lists.samba.org (Postfix) with SMTP id BCF6F4D40; Tue, 22 May 2001
02:27:42 -0700 (PDT)
Received: From EMAILSRV.UPPINGHAM.CO.UK (172.16.0.14[172.16.0.14
port:3181]) by intsrv Mail essentials (server 2.422) with SMTP id:
<2239 at intsrv> for <samba-ntdom at lists.samba.org>; Tue, 22 May 2001
10:27:12 +0100 smtpmailfrom <9Mager at uppingham.co.uk>
Received: by EMAILSRV with Internet Mail Service (5.5.2653.19) id
<KSXN5VL3>; Tue, 22 May 2001 10:27:23 +0100
Message-ID: <293BE1A6609BD411AEC300A0C9FC055E749343 at EMAILSRV>
From: Mager Charles WB <9Mager at uppingham.co.uk>
To: "Samba (E-mail)" <samba at lists.samba.org>, "SNTDom (E-mail)"
<samba-ntdom at lists.samba.org>
Subject: Quota
Date: Tue, 22 May 2001 10:27:22 +0100
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Is there any way of setting a limit on the sizes of home-areas?
--
C.S.Mager
charlie at csmager.co.uk
This email and the information that it contains may be confidential,
legally privileged and protected by law. Access by the intended
recipient only is authorised. Any liability (in negligence or otherwise)
arising from any third party acting, or refraining from acting, on any
information contained in this email is hereby excluded. If you are
not the intended recipient, please notify the sender immediately
and do not disclose the contents to any other person, use it for
any purpose, or store or copy the informationin any medium.
Return-Path: <ad at ordix.de>
Delivered-To: samba at lists.samba.org
Received: from gw.ordix.de (gw.ordix.de [212.218.179.18]) by
lists.samba.org (Postfix) with ESMTP id EB3CB4934; Tue, 22 May 2001
02:35:48 -0700 (PDT)
Received: from ordix.de (asteroid.ordix.de [192.168.7.11]) by
gw.ordix.de (8.9.3/8.9.3) with ESMTP id LAA05870; Tue, 22 May 2001
11:36:39 +0200
Message-ID: <3B0A3320.302F41EC at ordix.de>
Date: Tue, 22 May 2001 11:36:32 +0200
From: Andre Dirr <ad at ordix.de>
Organization: ORDIX AG
X-Mailer: Mozilla 4.77 [en] (WinNT; U)
X-Accept-Language: de,en
MIME-Version: 1.0
To: Mager Charles WB <9Mager at uppingham.co.uk>
Cc: "Samba (E-mail)" <samba at lists.samba.org>, "SNTDom (E-mail)"
<samba-ntdom at lists.samba.org>
Subject: Re: Quota
References: <293BE1A6609BD411AEC300A0C9FC055E749343 at EMAILSRV>
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
hi,
of cause there is!
first of all you have to compile a kernel with quota support
then you have to install the latest quota-package
install the sources of samba and ./configure --with-quotas
finally you have to set up the quotas for single users or groups
that4s it ;-)
andy
Mager Charles WB wrote:
>
> Is there any way of setting a limit on the sizes of home-areas?
Return-Path: <r.j.mckeating at lboro.ac.uk>
Delivered-To: samba at lists.samba.org
Received: from mailer2.lut.ac.uk (mailer2.lut.ac.uk [158.125.1.206]) by
lists.samba.org (Postfix) with ESMTP id EECA5423C; Tue, 22 May 2001
03:01:55 -0700 (PDT)
Received: from [158.125.1.116] (helo=staffpop1.lboro.ac.uk ident=root)
by mailer2.lut.ac.uk with esmtp (Exim 2.10 #1) id 1528zz-0002FO-00;
Tue, 22 May 2001 11:02:43 +0100
Received: from nobody by staffpop1.lboro.ac.uk with local (Exim 3.13 #1)
id 1528zy-0002Yx-00; Tue, 22 May 2001 11:02:42 +0100
To: Christopher Travers <einhverfr at hotmail.com>
Subject: Re: Email 2 & Others...
Message-ID: <990525762.3b0a3942bbfc6 at staff-webmail.lboro.ac.uk>
Date: Tue, 22 May 2001 11:02:42 +0100 (BST)
From: R.J.Mckeating at lboro.ac.uk
Cc: kenny at hereintown.net, 9Mager at uppingham.co.uk, samba at lists.samba.org,
samba-ntdom at lists.samba.org
References: <F116ST7y6HYxNKZvEHA00005d34 at hotmail.com>
In-Reply-To: <F116ST7y6HYxNKZvEHA00005d34 at hotmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 7bit
User-Agent: IMP/PHP IMAP webmail program 2.2.1
X-Originating-IP: 131.231.80.5
X-Lboro-Filtered: mailer2.lut.ac.uk, Tue, 22 May 2001 11:02:43 +0100
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
While I agree with Christophers reasoning, I would not mess with etc inittab.
What is wrong with the plain old chkconfig command with a --levels parameter
Ron
Quoting Christopher Travers <einhverfr at hotmail.com>:
> Hi All,
>
> Personal preference, but:
>
> I would not place it in the rc.local because it will not give you any
> fine-grained control over the starting of the service at various
> run-levels
> (do you want SAMBA to start when you go into single-user mode for
> additional
> maintanence?).
>
> Rather I would place a link to the script in the /etc/rc.d/rc0.d through
>
> rc5.d directories in order to control at which runlevels Samba will be
> running.
>
> With Sys V style init scripts, a script in these directories (where the
> digit is equal to the run-level) will be activated with a 'stop'
> argument
> when proceeded by a K and with the 'start' argument when proceeded with
> an
> S. THey are run in the order that they are listed from the file system,
> so
> S01SAMBA would be run before S99Samba. This also gives you control over
> the
> order of activation of your services (making sure that, for example, any
>
> ipchains rules are applied before you activate Samba, of you need to
> take
> this precaution).
>
> Runlevels at boot are controlled in the /etc/inittab.
>
> Hope this helps.
> Chris Travers
>
> >From: Kenny <kenny at hereintown.net>
> >To: Mager Charles WB <9Mager at uppingham.co.uk>
> >CC: "Samba (E-mail)" <samba at lists.samba.org>, "SNTDom (E-mail)"
> ><samba-ntdom at lists.samba.org>
> >Subject: Re: Email 2 & Others...
> >Date: Mon, 21 May 2001 10:00:57 -0400 (EDT)
> >
> >I'd put the commands to start smbd and nmbd on boot in
> /etc/rc.d/rc.local
> >...
> >
> >As far as exim goes ... you need to read first:
> >
> >From the exim README ...
> >
> >Edit the file called src/EDITME and put the result in a file called
> >Local/Makefile.
> >
> >Then you may proceed ... and next time ... you post an error message
> you
> >may want to be specific ... not "or something like that" ...
> >
> >On Mon, 21 May 2001, Mager Charles WB wrote:
> >
> > > Again another email ALMOST off the point, but not quite. The first
> >question,
> > > which is to do with samba, is - How can I make samba load on the
> bootup
> >of
> > > the server in RedHat 7.0?
> > >
> > > The second is that I have downloaded exim for use as an email server
> as
> >it
> > > was recommended by someone (mainly because it is completely free!).
> When
> >I
> > > try to make the config file before installing it (ie just typing
> >"make"), it
> > > says "command: make: not found" or something like that - what am I
> >missing?
> > >
> > > --
> > > C.S.Mager
> > > charlie at csmager.co.uk
> > >
> > >
> > > This email and the information that it contains may be confidential,
> > > legally privileged and protected by law. Access by the intended
> > > recipient only is authorised. Any liability (in negligence or
> otherwise)
> > > arising from any third party acting, or refraining from acting, on
> any
> > > information contained in this email is hereby excluded. If you are
> > > not the intended recipient, please notify the sender immediately
> > > and do not disclose the contents to any other person, use it for
> > > any purpose, or store or copy the informationin any medium.
> > > --
> > > To unsubscribe from this list go to the following URL and read the
> > > instructions: http://lists.samba.org/mailman/listinfo/samba
> > >
> > >
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
>
>
Ron McKeating
Computing Services
Loughborough University
01509 222329
Return-Path: <lou at westlawnumc.org>
Delivered-To: samba at lists.samba.org
Received: from smtp5ve.mailsrvcs.net (smtp5vepub.gte.net
[206.46.170.26]) by lists.samba.org (Postfix) with ESMTP id 4752846F0
for <samba at lists.samba.org>; Tue, 22 May 2001 05:51:04 -0700 (PDT)
Received: from youthpastor
(adsl-151-197-213-34.phila.adsl.bellatlantic.net [151.197.213.34]) by
smtp5ve.mailsrvcs.net (8.9.1/8.9.1) with SMTP id MAA8633322 for
<samba at lists.samba.org>; Tue, 22 May 2001 12:56:55 GMT
From: "Lou Hornberger" <lou at westlawnumc.org>
To: <samba at lists.samba.org>
Subject: REPOST: 2.2.0 Problem
Date: Tue, 22 May 2001 08:50:04 -0400
Message-ID: <000601c0e2bd$b9eeb8a0$0a00a8c0 at youthpastor>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2910.0)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
When I type smbstatus on RH7 using Samaba 2.2.0 in a terminal I get:
Failed to open byte range locking database
ERROR: Failed to initialise locking database
Can't initialise locking module - exiting
I can see all the machines on my network and read and write to them from the
Linux box.
The one machine (Win98SE) that has a user account created when I installed
RH7 can
access the shares, but while the other computers (Win98SE clients)on the
network can see my SMB share, they get a IPC$ error, even though I used
the adduser, then passwd, then smbpasswd commands for each of them.
Here is my smb.conf file
[global]
workgroup = WLUMC
netbios name = Crispus
server string = For Testing Only - Samba %v
encrypt passwords = yes
[test]
comment = For testing only, please
path = /export/samba
read only = no
guest ok = yes
[homes]
guest ok = no
read only = no
Any Ideas?
Lou
Return-Path: <u13471 at hs-harz.de>
Delivered-To: samba at lists.samba.org
Received: from steinadler.fh-harz.de (unknown [194.95.16.230]) by
lists.samba.org (Postfix) with ESMTP id 8D29749B7 for
<samba at lists.samba.org>; Tue, 22 May 2001 06:08:23 -0700 (PDT)
Received: from hs-harz.de ([194.95.18.55]) by steinadler.fh-harz.de
(Netscape Messaging Server 3.6) with ESMTP id AAA180FB for
<samba at lists.samba.org>; Tue, 22 May 2001 15:09:13 +0200
Message-ID: <3B0A6515.44582127 at hs-harz.de>
Date: Tue, 22 May 2001 15:09:41 +0200
From: "Edgar Soldin" <u13471 at hs-harz.de>
Reply-To: edgar at soldin.de
Organization: Hochschule Harz
X-Mailer: Mozilla 4.73 [de] (Win98; U)
X-Accept-Language: de
MIME-Version: 1.0
To: samba at lists.samba.org
Subject: no password option, adding -n while automounting, though pass
is defined
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi folks,
it crazy ... im workin on it for a day now.
Im tryin to configure le service de automount ;) aka. autofs to do its job
with some smbfs shares. Please people have a look at the output in
/var/log/messages. I defined a password but smbmount is ignoring it...
HELP... am I stupid`?
Additional i attach the mapfile. Any Ideas?
tx in Advnce Ed
..../var/log/messages
May 22 15:01:48 mir automount[7425]: attempting to mount entry
/home/u13471/wh4-511/dude
May 22 15:01:48 mir automount[7585]: lookup(file): looking up dude
May 22 15:01:48 mir automount[7585]: lookup(file): dude ->
-fstype=smbfs,username=andreas,password=schnabel ://wh4-511/dude
May 22 15:01:48 mir automount[7585]: expanded entry:
-fstype=smbfs,username=andreas,password=schnabel ://wh4-511/dude
May 22 15:01:48 mir automount[7585]: parse(sun): gathered options:
fstype=smbfs,username=andreas,password=schnabel
May 22 15:01:48 mir automount[7585]: parse(sun): core of entry:
//wh4-511/dude
May 22 15:01:48 mir automount[7585]: do_mount //wh4-511/dude
/home/u13471/wh4-511/dude type smbfs options
username=andreas,password=schnabel using module smbfs
May 22 15:01:48 mir automount[7585]: mount(smbfs): no password option,
adding -n
May 22 15:01:48 mir automount[7585]: mount(smbfs): no password option,
adding -n
May 22 15:01:48 mir automount[7585]: mount(smbfs): calling mkdir
/home/u13471/wh4-511/dude
May 22 15:01:48 mir automount[7585]: mount(smbfs): failed to mount
//wh4-511/dude on /home/u13471/wh4-511/dude
.../auto.smb (le map)
# automount points below /a
# This is an automounter map and it has the following format
# key [ -mount-options-separated-by-comma ] location
# Details may be found in the autofs(5) manpage
# smb-servers
dude -fstype=smbfs,username=andreas,password=schnabel
://wh4-511/dude
dudezwo -fstype=smbfs,credentials=/home/u13471/pass.smb
://wh4-511/dudezwo
bla -fstype=smbfs,guest
://wh4-511/bla
--
public class WhoDidIt{ // A comment. I love comments
private static Person sender;
public static void main (String[] foo){
sender = new Student();
sender.setName({"Edgar", "Soldin"});
sender.setCourse("Computerscience for media and art");
Adress address=new Adress();
address.setStreet("Friedrichstr. 57-59 Wh 4.511");
address.setZip(38855);
address.setCity("Wernigerode");
adress.setCountry("Germany");
sender.setAdress(address);
sender.setMobilePhone("+49171-2782880");
sender.setWebSiteUrl(" http://www.soldin.de ");
sender.setEmail(" edgar at soldin.de ");
sender.setGender(true);
System.out.println(sender.toString());
}
}
Return-Path: <wundertp at rescobaltimore.com>
Delivered-To: samba at lists.samba.org
Received: from hermes.toad.net (hermes.toad.net [162.33.130.251]) by
lists.samba.org (Postfix) with ESMTP id 13AF64F7D for
<samba at lists.samba.org>; Tue, 22 May 2001 06:13:56 -0700 (PDT)
Received: from rescobaltimore.com (resco.dslwan.toad.net
[162.33.157.18]) by hermes.toad.net (8.11.0/8.11.0) with ESMTP id
f4MDEiT25548 for <samba at lists.samba.org>; Tue, 22 May 2001 09:14:44
-0400
Message-ID: <3B0A6658.1260353A at rescobaltimore.com>
Date: Tue, 22 May 2001 09:15:04 -0400
From: Tim Wunder <wundertp at rescobaltimore.com>
Organization: RESCO/Baltimore
X-Mailer: Mozilla 4.76 [en] (Windows NT 5.0; U)
X-Accept-Language: en,pdf
MIME-Version: 1.0
To: samba at lists.samba.org
Subject: File Permissions
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
New to the list, apologies if this has been adressed before.
Win 2K Pro SP1, Samba 2.2.0, RedHat 7.0
I asked this on the newsgroup and no one has responded, yet. Any ideas
on how to make this work?
We have a Management share, mgt, that is only visible to management. All
members of group mgt have read access to the files. I also want to allow
those in that group to create directories beneath all existing
directories. But, I don't want to allow users to be able to change or
modify other users files.
The share is configured with a create mask of 0744, and a directory mask
of 0775. @mgt is listed in the write list for the share.
If the user's default group is mgt and he or she can read and write on
the mgt share fine. When he/she create a folder, or directory, on the
mgt share, it gets the group mgt, with rwxrwxr-x permissions (0775),
which is OK. When they create a file in the folder, it gets group mgt
with permissions rwxr--r-- (0744), again, this is OK. Another user in
the mgt group can open the file and read it, but they cannot open it,
edit it and save it, unless they save it as another file.
The problem is, that same user, who can't EDIT the file from an
application, can re-name it AND delete it. So, if they want to EDIT the
file, they just open it, save it under another name, delete the original
and rename the new one back to the original. Now they have read/write
permission on the file.
Is it possible to prevent this?
Regards,
Tim
Return-Path: <simulateste at bol.com.br>
Delivered-To: samba at lists.samba.org
Received: from shannon.bol.com.br (shannon.bol.com.br [200.221.24.13])
by lists.samba.org (Postfix) with ESMTP id AD9404E3E for
<samba at lists.samba.org>; Tue, 22 May 2001 06:55:15 -0700 (PDT)
Received: from bol.com.br (200.221.24.75) by shannon.bol.com.br
(5.1.061) id 3B021642000FC3CB for samba at lists.samba.org; Tue, 22 May
2001 10:54:41 -0300
Date: Tue, 22 May 2001 10:54:40 -0300
Message-Id: <GDQPB4$IMxEZ98jEBYJrQIXU5KxLkgT1hoNh9Qdt5QVppQ at bol.com.br>
Subject: Restrict SWAT access question (SAMBA 2.0.7)
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
From: "simulateste" <simulateste at bol.com.br>
To: samba at lists.samba.org
X-XaM3-API-Version: 1.1.9.1.17a
X-SenderIP: 200.231.213.245
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi all,
I have SAMBA 2.0.7 running under HPUX 11.00, and I4d
like to restrict only root user to login through swat.
I have more than one user with ID=0, but just one (root)
must be able to login by swat.
Does anyone know how can I do it ?
TIA.
__________________________________________________________________________
Acesso pelo menor prego do mercado! R$ 14,90 nos 3 primeiros meses!
ASSINE AGORA! http://www.bol.com.br/acessobol/
Return-Path: <9Mager at uppingham.co.uk>
Delivered-To: samba at lists.samba.org
Received: from intsrv (mail.uppingham.co.uk [195.59.103.130]) by
lists.samba.org (Postfix) with SMTP id 39C454B1A; Tue, 22 May 2001
06:57:58 -0700 (PDT)
Received: From EMAILSRV.UPPINGHAM.CO.UK (172.16.0.14[172.16.0.14
port:1555]) by intsrv Mail essentials (server 2.422) with SMTP id:
<2696 at intsrv> for <samba at lists.samba.org>; Tue, 22 May 2001 14:57:57
+0100 smtpmailfrom <9Mager at uppingham.co.uk>
Received: by EMAILSRV with Internet Mail Service (5.5.2653.19) id
<KSXN5VZ9>; Tue, 22 May 2001 14:58:07 +0100
Message-ID: <293BE1A6609BD411AEC300A0C9FC055E74935D at EMAILSRV>
From: Mager Charles WB <9Mager at uppingham.co.uk>
To: "SNTDom (E-mail)" <samba-ntdom at lists.samba.org>, "Samba (E-mail)"
<samba at lists.samba.org>
Subject: Quota
Date: Tue, 22 May 2001 14:58:06 +0100
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Thanks for all the help with quota, but I'm still lost! Could someone
explain to me, exactly, how I would set the quota for the home areas of the
group 'users' to 500Mb (very generous). I'm not bothered about how many
files they have, as long as it is below 500Mb. I think there is a soft &
hard limit, and the hard limit I will set as 650Mb. HELP! I'm completely
stuck - If i type 'edquota -g users' then I get a blank page in 'vi', and I
don't know what to write! Also, there is no file called /etc/fstab on my
computer!
--
C.S.Mager
charlie at csmager.co.uk
This email and the information that it contains may be confidential,
legally privileged and protected by law. Access by the intended
recipient only is authorised. Any liability (in negligence or otherwise)
arising from any third party acting, or refraining from acting, on any
information contained in this email is hereby excluded. If you are
not the intended recipient, please notify the sender immediately
and do not disclose the contents to any other person, use it for
any purpose, or store or copy the informationin any medium.
Return-Path: <kmuska at clementsmfg.com>
Delivered-To: samba at samba.org
Received: from CLEMWEB.CLEMENTSMFG.COM (unknown [12.47.68.249]) by
lists.samba.org (Postfix) with ESMTP id 86D9C4D51 for
<samba at samba.org>; Tue, 22 May 2001 07:09:46 -0700 (PDT)
Received: from kmuska ([192.168.1.57]) by CLEMWEB.CLEMENTSMFG.COM
(8.9.3/8.9.3) with SMTP id KAA30840 for <samba at samba.org>; Tue, 22 May
2001 10:07:32 -0400
From: "Keith Muska" <kmuska at CLEMENTSMFG.COM>
To: <samba at samba.org>
Subject: Question about %U
Date: Tue, 22 May 2001 10:07:13 -0400
Message-ID: <001401c0e2c8$853a4920$3901a8c0 at clementsmfg.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook 8.5, Build 4.71.2377.0
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hello. I have a question about the %U variable. I have a line is smb.conf
that reads "log file = /var/log/samba/%U.log" I was expecting this to
create log files that listed the username. However, When a machine first
connects to the server a "nobody.log" file is created. Then after a couple
minutes of use another file is created with the proper user name. Why does
the %U variable thinks my machines are logged in as nobody for a few minutes
and then corrects itself later?? Also, This behavior only seems to occur
when the Samba server is acting as a Local Master.
Any Information would be greatly appreciated.
RedHat 7.1 i686 2.4.2 kernel
Samba 2.0.7-36
Windows 98 SE Clients.
Thank You,
Keith Muska
Clements Manufacturing, L.L.C.
810.376.2215 X 170
Fax 253.681.7311
mailto:kmuska at clementsmfg.com
http://www.clementsmfg.com
Return-Path: <J.L.Gilmour at exeter.ac.uk>
Delivered-To: samba at lists.samba.org
Received: from mercury.ex.ac.uk (mercury.ex.ac.uk [144.173.6.26]) by
lists.samba.org (Postfix) with ESMTP id 5C5434A92; Tue, 22 May 2001
07:14:55 -0700 (PDT)
Received: from olib [144.173.6.8] by mercury via ESMTP (PAA19529); Tue,
22 May 2001 15:15:45 +0100 (BST)
From: J.L.Gilmour at exeter.ac.uk
Message-Id: <1206951.200105221415 at olib>
Subject: Re: Quota
To: 9Mager at uppingham.co.uk (Mager Charles WB)
Date: Tue, 22 May 2001 15:15:44 +0100 (BST)
Cc: samba-ntdom at lists.samba.org, samba at lists.samba.org
In-Reply-To: <293BE1A6609BD411AEC300A0C9FC055E74935D at EMAILSRV> from
"Mager Charles WB" at May 22, 2001 02:58:06 pm
X-Mailer: ELM [version 2.4 PL23]
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
> Thanks for all the help with quota, but I'm still lost! Could someone
> explain to me, exactly, how I would set the quota for the home areas of the
> group 'users' to 500Mb (very generous). I'm not bothered about how many
> files they have, as long as it is below 500Mb. I think there is a soft &
> hard limit, and the hard limit I will set as 650Mb. HELP! I'm completely
> stuck - If i type 'edquota -g users' then I get a blank page in 'vi', and I
> don't know what to write! Also, there is no file called /etc/fstab on my
> computer!
You haven't given us the operating system you're using... if its Solaris
you want something along the lines of
fs /export/home1 blocks (soft = 0, hard = 0) inodes (soft = 0, hard = 0)
Change /export/home1 to the file system your users are on. Change the
soft/hard values for space to 5000000 & 512000. Leave inodes at 0.
& fstab doesn't exist 'cause its called vfstab.
Of course if you're not running Solaris or other System 5 derivatives,
none of the above will apply :-)
Jayne.
--
Return-Path: <syhom at ece.ucsd.edu>
Delivered-To: samba at lists.samba.org
Received: from ecesis.ucsd.edu (ecesis.ucsd.edu [132.239.24.199]) by
lists.samba.org (Postfix) with ESMTP id 882664FD3 for
<samba at lists.samba.org>; Tue, 22 May 2001 07:32:59 -0700 (PDT)
Received: from localhost by ecesis.ucsd.edu (8.9.1a/8.9.1) with ESMTP id
HAA06019 for <samba at lists.samba.org>; Tue, 22 May 2001 07:33:49 -0700
(PDT)
Date: Tue, 22 May 2001 07:33:49 -0700 (PDT)
From: Soo Hom <syhom at ece.ucsd.edu>
To: samba at lists.samba.org
Subject: problem with samba 2.2 + win 2000
In-Reply-To: <20010519190117.9159644E1 at lists.samba.org>
Message-ID: <Pine.GSO.4.10.10105220728190.5796-100000 at ecesis.ucsd.edu>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi! I have samba 2.2 installed on a bsdi 4.2 machine and am having the
following problem:
On a win 2000 client that has a samba share mounted as a network drive.
When trying to save a word file to the network drive word freezes and
windows explorer crashes when trying to access the networked drive.
Any ideas what is wrong? Below is my smb.conf file.
Soo
# Samba config file created using SWAT
# from localhost.ucsd.edu (127.0.0.1)
# Date: 2001/04/10 15:18:46
# Global parameters
[global]
workgroup = CVRR
netbios name = CVRR
encrypt passwords = Yes
passwd program = /usr/bin/passwd
passwd chat = *New*password* %n\n *Retype*new*password* %n\n
*updating*password*database**
unix password sync = Yes
announce as = NT Workstation
name resolve order = wins lmhosts hosts bcast
time server = Yes
printcap name = /etc/printcap.local
domain admin group = @sambaadm
logon script = scripts\logon.bat
logon path = \\%N\profiles\%U\profile.%a
domain logons = Yes
os level = 65
preferred master = True
domain master = True
wins support = Yes
guest account = ftp
invalid users = daemon sys bin operator uucp games news demo lpd
www radius amanda
[homes]
comment = Home Directory
read only = No
browseable = No
[Share]
comment = Shared Files Directory
path = /share
read only = No
create mask = 0777
force create mode = 0777
directory mask = 0777
force directory mode = 0777
[FTP]
comment = Anonymous FTP Directory
path = /local/ftp
read only = No
[netlogon]
path = /local/samba/netlogon
[printers]
path = /var/spool/lpd-samba
printable = Yes
queuepause command = lpc -P%p stop
queueresume command = lpc -P%p start
browseable = No
[swirl]
path = /var/spool/lpd-samba
read only = No
printable = Yes
queuepause command = lpc -P%p stop
queueresume command = lpc -P%p start
printer name = swirl
printer driver = HP LaserJet 4M
oplocks = No
share modes = No
[stream]
path = /var/spool/lpd-samba
read only = No
printable = Yes
queuepause command = lpc -P%p stop
queueresume command = lpc -P%p start
printer name = stream
printer driver = HP LaserJet 4M
oplocks = No
share modes = No
[pam-printer]
path = /var/spool/lpd-samba
read only = No
printable = Yes
queuepause command = lpc -P%p stop
queueresume command = lpc -P%p start
printer name = pam-printer
printer driver = HP LaserJet 4M Plus
oplocks = No
share modes = No
[wave]
path = /var/spool/lpd-samba
read only = No
printable = Yes
queuepause command = lpc -P%p stop
queueresume command = lpc -P%p start
printer name = wave
printer driver = HP LaserJet 4M
oplocks = No
share modes = No
[tide]
path = /var/spool/lpd-samba
read only = No
printable = Yes
queuepause command = lpc -P%p stop
queueresume command = lpc -P%p start
printer name = tide
printer driver = HP C LaserJet 4500-HP
oplocks = No
share modes = No
[profiles]
path = /local/samba/profiles
read only = No
force create mode = 0744
force directory mode = 0755
[Web Docs]
comment = Web Site Documents
path = /local/apache/docs
read only = No
[Beta Web Docs]
comment = Beta Web Site Documents
path = /local/apache/beta-docs
read only = No
Return-Path: <dba at informenge.com.br>
Delivered-To: samba at lists.samba.org
Received: from server9.splicenet.com.br (super.splicenet.com.br
[200.246.52.7]) by lists.samba.org (Postfix) with ESMTP id C6FB14FD2
for <samba at lists.samba.org>; Tue, 22 May 2001 07:33:06 -0700 (PDT)
Received: from proxyplus.universe ([200.178.127.110]) by
server9.splicenet.com.br (8.11.2/8.11.2) with ESMTP id f4MEXDV31687
for <samba at lists.samba.org>; Tue, 22 May 2001 11:33:14 -0300
Received: from 131.107.2.11 by Proxy+; Tue, 22 May 2001 14:30:17 GMT
Message-ID: <015b01c0e2cc$54a6d7c0$0b026b83 at josias>
From: "Luciano Teixeira" <dba at informenge.com.br>
To: <samba at lists.samba.org>
Subject: win98 doesn't connect to samba shares
Date: Tue, 22 May 2001 11:34:37 -0300
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4522.1200
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi everybody, I'm new here and this is my first time dealing with samba, and
I'm facing some problems.
I installed samba in a linux server and it worked fine. I tried to access
it from a 98 workstation and it worked ok, except that the linux machine
doesn't appear in the network neighborhood. To access the samba server I
need to type \\linuxserver in the execute box. But still I could access the
files and shared folders. Then I tried the same with the others 98
workstations. They could see the server name and description, but when I try
to access the server, win98 says that the machine does not exists. I tried
to change the smb.conf file, used the patch for encrypted password, but
nothing happened. I know this is a simple question, but because this is my
first time with samba, I don't know where to start.
Thanks,
Luciano Teixeira
Informenge - Brazil
Return-Path: <ad at ordix.de>
Delivered-To: samba at lists.samba.org
Received: from gw.ordix.de (gw.ordix.de [212.218.179.18]) by
lists.samba.org (Postfix) with ESMTP id 7116C4D80; Tue, 22 May 2001
07:43:13 -0700 (PDT)
Received: from ordix.de (asteroid.ordix.de [192.168.7.11]) by
gw.ordix.de (8.9.3/8.9.3) with ESMTP id QAA08155; Tue, 22 May 2001
16:44:03 +0200
Message-ID: <3B0A7B2B.D43B3E1A at ordix.de>
Date: Tue, 22 May 2001 16:43:55 +0200
From: Andre Dirr <ad at ordix.de>
Organization: ORDIX AG
X-Mailer: Mozilla 4.77 [en] (WinNT; U)
X-Accept-Language: de,en
MIME-Version: 1.0
To: Mager Charles WB <9Mager at uppingham.co.uk>
Cc: "Samba (E-mail)" <samba at lists.samba.org>, "SNTDom (E-mail)"
<samba-ntdom at lists.samba.org>
Subject: Re: Quota
References: <293BE1A6609BD411AEC300A0C9FC055E749343 at EMAILSRV>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi,
a very good documentation is here:
http://www.europe.redhat.com/documentation/mini-HOWTO/Quota.php3
andy
Return-Path: <9Mager at uppingham.co.uk>
Delivered-To: samba at lists.samba.org
Received: from intsrv (mail.uppingham.co.uk [195.59.103.130]) by
lists.samba.org (Postfix) with SMTP id 1E33B4E3E; Tue, 22 May 2001
08:20:43 -0700 (PDT)
Received: From EMAILSRV.UPPINGHAM.CO.UK (172.16.0.14[172.16.0.14
port:3407]) by intsrv Mail essentials (server 2.422) with SMTP id:
<2862 at intsrv> for <samba-ntdom at lists.samba.org>; Tue, 22 May 2001
16:20:41 +0100 smtpmailfrom <9Mager at uppingham.co.uk>
Received: by EMAILSRV with Internet Mail Service (5.5.2653.19) id
<KSXN5V0G>; Tue, 22 May 2001 16:20:52 +0100
Message-ID: <293BE1A6609BD411AEC300A0C9FC055E749360 at EMAILSRV>
From: Mager Charles WB <9Mager at uppingham.co.uk>
To: "Samba (E-mail)" <samba at lists.samba.org>, "SNTDom (E-mail)"
<samba-ntdom at lists.samba.org>
Subject: Quota on Samba.
Date: Tue, 22 May 2001 16:20:51 +0100
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Can anybody tell me the effects of quota on peoples home areas of the
windows users? Do they get warnings when they are nearly over? Is there any
warning system I can download?
--
C.S.Mager
charlie at csmager.co.uk
This email and the information that it contains may be confidential,
legally privileged and protected by law. Access by the intended
recipient only is authorised. Any liability (in negligence or otherwise)
arising from any third party acting, or refraining from acting, on any
information contained in this email is hereby excluded. If you are
not the intended recipient, please notify the sender immediately
and do not disclose the contents to any other person, use it for
any purpose, or store or copy the informationin any medium.
Return-Path: <thomas.meinke at gmx.de>
Delivered-To: samba at lists.samba.org
Received: from mail.gmx.net (pop.gmx.net [194.221.183.20]) by
lists.samba.org (Postfix) with SMTP id 4445A4FD1 for
<samba at lists.samba.org>; Tue, 22 May 2001 08:33:47 -0700 (PDT)
Received: (qmail 12878 invoked by uid 0); 22 May 2001 15:34:24 -0000
Received: from pd901c91e.dip.t-dialin.net (HELO pebbles.feuerstein)
(217.1.201.30) by mail.gmx.net (mail01) with SMTP; 22 May 2001
15:34:24 -0000
Content-Type: text/plain; charset="iso-8859-1"
From: Thomas Meinke <thomas.meinke at gmx.de>
Reply-To: thomas.meinke at gmx.de
To: samba at lists.samba.org
Subject: Re: Samba 2.2.0 and Windows 2000 with Service Pack 2
Date: Tue, 22 May 2001 17:35:52 -0400
X-Mailer: KMail [version 1.2]
References: <01051718241002.00442 at pebbles>
<20010518114356.F21872 at queso.plainjoe.org>
In-Reply-To: <20010518114356.F21872 at queso.plainjoe.org>
MIME-Version: 1.0
Message-Id: <01052217355200.09428 at pebbles.feuerstein>
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi Jerry!
It seems to be a printer driver problem, because the Kyocera FS-680 printer
works fine with a new printer driver, that comes with a new printer driver cd
today. With the old printer driver there was no chance to print anything with
the Kyocera FS-680, because I could not install the printer driver.
But the second printer Hewlett Packard Deskjet 970 CXi still have the
problem, and no printer driver from Hewlett Packard does work.
Ok, I could post level 10 debug logs, when you can me say how to create
someone.
Cu
Thomas Meinke (Atreju)
Am Freitag, 18. Mai 2001 12:43 schrieben Sie:
> Moved to samba-technical....
>
> Thomas,
>
> I am unable to reptoduce this using the English
> version of Windows 2000. Can you provide us with
> level 10 debug logs? Maybe post them on an FTP site
> were we can grab them?
>
> If worse comes to worse, I can install a german
> version of Win2k and try to reproduce it there.....
>
>
>
>
> Cheers, jerry
>
> On Thu, 17 May 2001 11:24:10 Thomas Meinke wrote:
> > Hello!
> >
> > I am running Samba 2.2.0 und Suse 7.1, and CUPS 1.1.5
> > it still works fine with no problems. But today I
> > installed the Service Pack 2 for Windows 2000,
> > and what should I say. I can not access the printers.
> > When I try to print something I got the error message:
> > (I translated it from German, may be the error message
> > is not exactly the same in English)
> > The printer is not accessible.
> >
> > Then I deleted the printer on the Windows 2000 system,
> > and tried to install it again, but now I get the following
> > error message:
> >
> > The choosen printer driver is either not compatible to
> > the actual Windows-Version or not available. Choose another
> > driver, or contact the administrator for further help.
> >
> > But the printer driver is the right one for Windows 2000,
> > and the driver works still fine until the Service Pack 2
> > was installed. All the other Workstation in the networtk
> > with Windows 98/Me and Windows 2000 (Service Pack 1) still
> > are able to print on the server. A test on a second
> > machine have the same result, after the installation of
> > Service Pack 2 the printers are not longer avaiable.
> >
> > Has another one the same problems?
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.4 (GNU/Linux)
Comment: For info see http://www.gnupg.org
iD8DBQE7Ctu9NHVkI2TfBCMRAmJNAJ9/3aJCd4mVupqRqvjK27j7FUibUQCfWEI4
MQXWw9akNBNdaSaxcyLOQeM=
=zRZb
-----END PGP SIGNATURE-----
Return-Path: <jeppesen at mrl.ucsb.edu>
Delivered-To: samba at samba.org
Received: from mainpc.mrl.ucsb.edu (mainpc.mrl.ucsb.edu
[128.111.119.106]) by lists.samba.org (Postfix) with ESMTP id
1CF2B50A5 for <samba at samba.org>; Tue, 22 May 2001 08:31:00 -0700 (PDT)
Received: from mrl.ucsb.edu (IDENT:jeppesen at localhost.localdomain
[127.0.0.1]) by mainpc.mrl.ucsb.edu (8.9.3/8.9.3) with ESMTP id
IAA24149 for <samba at samba.org>; Tue, 22 May 2001 08:31:47 -0700
Message-ID: <3B0A8662.108DF075 at mrl.ucsb.edu>
Date: Tue, 22 May 2001 08:31:47 -0700
From: Claus Jeppesen <jeppesen at mrl.ucsb.edu>
X-Mailer: Mozilla 4.77 [en] (X11; U; Linux 2.2.19-6.2.1 i686)
X-Accept-Language: en
MIME-Version: 1.0
To: samba at samba.org
Subject: SP2, WIN2K, and Samba2.2.0.
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Dear Samba-Team,
Thanx for bringing us Samba (It's nice to be able to integrate our Linux
and Win environment !).
I've been using Samba2.2.0 since it was released 4/17/01 - in the
meantime Microsoft has released sp2 for
Win2K. It now seems that I cannot get Win2K workstations with sp2 to
join a Samba controlled domain. I saw a rumor that sp2 "breaks" Samba
PDC - it that correct ?
Thanx,
Claus.
P.S. I did the experiment of installing Win2K + sp1 on a PC - then go to
www.microsoft.com and run the
windows upgrade tool such that only "critical" fixes was
installed. The Win2K PC can then still
join the Samba domain.
--
Claus Jeppesen
UCSB, Materials Research Lab.
Santa Barbara, CA 93106
Ph: 805-893-8642 - Fax: 805-893-8502
Return-Path: <faxguy at deanox.com>
Delivered-To: samba at lists.samba.org
Received: from server.deanox.com (ns1.deanox.com [209.197.23.235]) by
lists.samba.org (Postfix) with ESMTP id B752650B6 for
<samba at lists.samba.org>; Tue, 22 May 2001 08:36:55 -0700 (PDT)
Received: from rygar.deanox.com (rygar.deanox.com [209.197.23.237]) by
server.deanox.com (8.9.3/8.8.7) with SMTP id JAA30444; Tue, 22 May
2001 09:37:22 -0600
Message-Id: <3.0.6.32.20010522093743.00f32300 at server.deanox.com>
X-Sender: faxguy at server.deanox.com
X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.6 (32)
Date: Tue, 22 May 2001 09:37:43 -0600
To: Urban Widmark <urban at teststation.com>
From: Lee Howard <faxguy at deanox.com>
Subject: Re: smbmount error after 2.2.0 upgrade
Cc: <samba at lists.samba.org>
In-Reply-To: <Pine.LNX.4.30.0105220954300.15837-100000 at cola.teststation.
com>
References: <3.0.6.32.20010521182313.00b816d0 at server.deanox.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
At 10:02 AM 5/22/01 +0200, Urban Widmark wrote:
>On Mon, 21 May 2001, Lee Howard wrote:
>
>> >Here's the corresponding kernel messages:
>> >
>> >May 21 14:49:34 system modprobe: modprobe: Can't locate module
nls_iso8859-1
>> >May 21 14:49:34 system mount.smbfs[5985]: [2001/05/21 14:49:34, 0]
>> >client/smbmount.c:send_fs_socket(381)
>> >May 21 14:49:34 system mount.smbfs[5985]: mount.smbfs: entering daemon
>> >mode for service \\host\share, pid=5985
>> >May 21 14:49:34 system kernel: smbfs: failed to load nls 'iso8859-1'
>> >
>> >It seems obvious that it's erroring because of the missing module. I'm
not
>> >sure where to compile this module, however. Help?
>>
>> It's a "native language support" module. After compiling it, all is well.
>> Confusing.
>
>You have specified when configuring the kernel that you want NLS support
>in smbfs and probably given it iso8859-1 as the default. It tries to load
>it but can't find it, so it complains. samba 2.0.7 or 2.2.0 shouldn't
>matter, I think you changed something else too (like a kernel recompile).
Actually, I checked on this, and I have *not* specified NLS support in the
kernel.
>"failed to load nls" shouldn't be fatal, it should still mount the
>filesystem.
It doesn't mount it.
Lee.
Return-Path: <jbenedet at unm.edu>
Delivered-To: samba at lists.samba.org
Received: from linux06.unm.edu (linux06.unm.edu [129.24.15.38]) by
lists.samba.org (Postfix) with SMTP id 422D850B8 for
<samba at lists.samba.org>; Tue, 22 May 2001 08:37:04 -0700 (PDT)
Received: (qmail 10282 invoked by uid 124); 22 May 2001 15:37:54 -0000
Received: from jbenedet at unm.edu by linux06.unm.edu with
qmail-scanner-0.96 (. Clean. Processed in 0.244067 secs); 22 May 2001
15:37:54 -0000
Received: from bldg87-0053.unm.edu (129.24.204.111) by linux06.unm.edu
with SMTP; 22 May 2001 15:37:54 -0000
Date: Tue, 22 May 2001 09:32:11 -0600
From: John Benedetto <jbenedet at unm.edu>
To: samba at lists.samba.org
Subject: Re: win98 doesn't connect to samba shares
Message-ID: <2681452930.990523931 at bldg87-0053.unm.edu>
In-Reply-To: <015b01c0e2cc$54a6d7c0$0b026b83 at josias>
Originator-Info: login-token=Mulberry:01jXjhw/faRjEN3EtCpCtNNdDKUz4Wpins
Ag==
X-Mailer: Mulberry/2.0.5 (Win32)
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Have you run through the diagnostics that came with Samba? In the docs
directory, there is a list of tests to do, and possible reasons/fixes for
them.
I am also relatively new to Samba, but I _think_ this may have to do with
guest access on your system. The account listed in your smb.conf must be
set up properly. (if I am wrong, can someone correct me? Thanks.)
- john
--On Tuesday, May 22, 2001 11:34 AM -0300 Luciano Teixeira
<dba at informenge.com.br> wrote:
> Hi everybody, I'm new here and this is my first time dealing with samba,
> and I'm facing some problems.
> I installed samba in a linux server and it worked fine. I tried to access
> it from a 98 workstation and it worked ok, except that the linux machine
> doesn't appear in the network neighborhood. To access the samba server I
> need to type \\linuxserver in the execute box. But still I could access
> the files and shared folders. Then I tried the same with the others 98
> workstations. They could see the server name and description, but when I
> try to access the server, win98 says that the machine does not exists. I
> tried to change the smb.conf file, used the patch for encrypted password,
> but nothing happened. I know this is a simple question, but because this
> is my first time with samba, I don't know where to start.
>
> Thanks,
>
> Luciano Teixeira
> Informenge - Brazil
Return-Path: <tgkiran at yahoo.com>
Delivered-To: samba at samba.org
Received: from web4102.mail.yahoo.com (web4102.mail.yahoo.com
[216.115.104.122]) by lists.samba.org (Postfix) with SMTP id BC2D144F8
for <samba at samba.org>; Tue, 22 May 2001 08:53:38 -0700 (PDT)
Message-ID: <20010522155429.18213.qmail at web4102.mail.yahoo.com>
Received: from [202.54.37.76] by web4102.mail.yahoo.com; Tue, 22 May
2001 08:54:29 PDT
Date: Tue, 22 May 2001 08:54:29 -0700 (PDT)
From: TG Kiran <tgkiran at yahoo.com>
Subject: starting smb service
To: samba at samba.org
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
hi,
while going through the instructions for configuring the smb.conf
file , i came across an instruction which asked me to include
the following line in the /etc/rc.d/rc/local in order for samba
to run everytime my linux redhat 6.0 machine boots up
/etc/rc.d/init.d smb start
as per the instructions i did the same.suddendly the power went off
and while rebooting i am not being able to go into the login prompt
while booting i got the following messages
starting SMB service [FAILED]
starting SMB service [FAILED]
starting SMB service [FAILED]
then it goes into an infinite loop with only
starting SMB service
starting SMB service
starting SMB service
starting SMB service
starting SMB service
,..,.,
,..,.,
,.,..,
.,
how shall i be able to get to the login prompt
please help
thanking you
kiran tg
=====
__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/
Return-Path: <yhuerta at msi.umn.edu>
Delivered-To: samba at lists.samba.org
Received: from mail.msi.umn.edu (mail.msi.umn.edu [128.101.31.10]) by
lists.samba.org (Postfix) with ESMTP id 99B324C7D for
<samba at lists.samba.org>; Tue, 22 May 2001 09:20:36 -0700 (PDT)
Received: from blizzard.msi.umn.edu (blizzard.msi.umn.edu
[128.101.31.37]) by mail.msi.umn.edu (8.9.3/8.9.3) with ESMTP id
LAA1780356 for <samba at lists.samba.org>; Tue, 22 May 2001 11:21:27
-0500 (CDT)
Date: Tue, 22 May 2001 11:21:27 -0500 (CDT)
From: Yectli Huerta <yhuerta at msi.umn.edu>
To: <samba at lists.samba.org>
Subject: samba & SSL on irix
Message-ID: <Pine.A41.4.33.0105221120380.12650-100000 at blizzard.msi.umn.e
du>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I get the following messages, while trying to fire up smbclient.
SSL: Error conencting socket: error:24064064:random number
generator:SSLEAY_RAND_BYTES:PRNG not seeded
session request to SFS failed (code 142)
SSL: Error conencting socket: error:24064064:random number
generator:SSLEAY_RAND_BYTES:PRNG not seeded
session request to *SMBSERVER failed (code 142)
Irix does not come with an urandom, or random device. is it possible to
get samba to read "data" from the egd deamon (entropy gathering), .rnd
file, or something else.
TIA,
yectli
Return-Path: <Thomas_Cameron at Dell.com>
Delivered-To: samba at samba.org
Received: from ausxc07.us.dell.com (ausxc07.us.dell.com
[143.166.99.215]) by lists.samba.org (Postfix) with ESMTP id B26275051
for <samba at samba.org>; Tue, 22 May 2001 09:28:20 -0700 (PDT)
Received: by ausxc07.us.dell.com with Internet Mail Service
(5.5.2650.21) id <LD2DSB1L>; Tue, 22 May 2001 11:25:33 -0500
Message-ID: <8DFEDD1C2ADFD311AC3E0090277A4D60021E262C at ausxmsp101.us.dell
.com>
From: Thomas_Cameron at Dell.com
To: tgkiran at yahoo.com, samba at samba.org
Subject: RE: starting smb service
Date: Tue, 22 May 2001 11:25:19 -0500
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2650.21)
Content-Type: text/plain
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Reboot the machine. At the LILO: prompt, type
"linux single"
and hit [enter]. This will take you to single-user mode, and you can fix
the startup script.
Thanks,
Thomas Cameron, MCSE, MCT, CNE, RHCE
IS Engineering Manager
Dell Financial Services
> -----Original Message-----
> From: TG Kiran [mailto:tgkiran at yahoo.com]
> Sent: Tuesday, May 22, 2001 10:54 AM
> To: samba at samba.org
> Subject: starting smb service
>
>
> hi,
>
> while going through the instructions for configuring the smb.conf
> file , i came across an instruction which asked me to include
> the following line in the /etc/rc.d/rc/local in order for samba
> to run everytime my linux redhat 6.0 machine boots up
>
> /etc/rc.d/init.d smb start
>
> as per the instructions i did the same.suddendly the power went off
> and while rebooting i am not being able to go into the login prompt
>
> while booting i got the following messages
>
> starting SMB service [FAILED]
> starting SMB service [FAILED]
> starting SMB service [FAILED]
>
> then it goes into an infinite loop with only
>
> starting SMB service
> starting SMB service
> starting SMB service
> starting SMB service
> starting SMB service
> ,..,.,
> ,..,.,
> ,.,..,
>
> .,
>
>
> how shall i be able to get to the login prompt
>
> please help
>
> thanking you
> kiran tg
>
>
>
>
>
> =====
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Auctions - buy the things you want at great prices
> http://auctions.yahoo.com/
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
>
Return-Path: <g.cameron at biomed.abdn.ac.uk>
Delivered-To: samba at lists.samba.org
Received: from mx.biomed.abdn.ac.uk (unknown [139.133.211.4]) by
lists.samba.org (Postfix) with ESMTP id 041804FB6 for
<samba at lists.samba.org>; Tue, 22 May 2001 09:40:52 -0700 (PDT)
Received: from biomed.abdn.ac.uk (ptah.biomed.abdn.ac.uk
[139.133.211.101]) by mx.biomed.abdn.ac.uk (Postfix) with ESMTP id
E85A91BEC7; Tue, 22 May 2001 17:41:33 +0100 (BST)
Message-ID: <3B0A96D9.B73344B1 at biomed.abdn.ac.uk>
Date: Tue, 22 May 2001 17:42:01 +0100
From: George Cameron <g.cameron at biomed.abdn.ac.uk>
Organization: Aberdeen University
X-Mailer: Mozilla 4.75 [en]C-CCK-MCD (Win95; U)
X-Accept-Language: en
MIME-Version: 1.0
To: Mager Charles WB <9Mager at uppingham.co.uk>
Cc: "Samba (E-mail)" <samba at lists.samba.org>
Subject: Re: Quota on Samba.
References: <293BE1A6609BD411AEC300A0C9FC055E749360 at EMAILSRV>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I'm sure the following might be considered a quick-n-dirty solution, but it
does the job for us. I run a cron job at 4pm every day which checks user quotas
and emails a warning to any user who is over their soft limit, or a longer
message to any user who is over their hard limit. This q-n-d script assumes our
default warning time of 7 days, but it could easily be generalised.
George
(following line is cron entry)
0 16 * * * /usr/local/etc/quotas
(following is script /usr/local/etc/quotas)
#!/bin/sh
/usr/sbin/repquota -a 2>/dev/null | egrep '\+' | \
while read user plus used soft hard time fused fsoft fhard ftime
do
name="`egrep '^$user' /etc/passwd|cut -d: -f5|cut -d, -f1`"
(
echo "Subject: WARNING: ${user}, ${name} is OVER QUOTA" ;
echo "Your disk usage is: ${used} kilobytes";
echo "Your soft limit is: ${soft} kilobytes";
echo "Your hard limit is: ${hard} kilobytes";
echo "";
if [ "${time}" = "EXPIRED" ]; then
echo "Your quota has now EXPIRED, since you have been";
echo "over your allocated quota for more than 7 days.";
echo "";
echo "You will be unable to log on at a Unix console,";
echo "but you may telnet in from a PC to delete some";
echo "files (or you may delete files from your H: drive";
echo "on the PC). If you require more file space for your";
echo "departmental work, you should request an additional";
echo "quota allocation from your system administrator.";
elif [ "${time}" = "NOT" ]; then
echo "Time left until expiry: 7days";
else
echo "Time left until expiry: ${time}";
fi
echo "";
echo "This message is generated automatically";
) | /usr/lib/sendmail -f administrator ${user}
done
Mager Charles WB wrote:
> Can anybody tell me the effects of quota on peoples home areas of the
> windows users? Do they get warnings when they are nearly over? Is there any
> warning system I can download?
>
> --
> C.S.Mager
> charlie at csmager.co.uk
>
> This email and the information that it contains may be confidential,
> legally privileged and protected by law. Access by the intended
> recipient only is authorised. Any liability (in negligence or otherwise)
> arising from any third party acting, or refraining from acting, on any
> information contained in this email is hereby excluded. If you are
> not the intended recipient, please notify the sender immediately
> and do not disclose the contents to any other person, use it for
> any purpose, or store or copy the informationin any medium.
--
---------------------------------------------------------------------
George Cameron g.cameron at biomed.abdn.ac.uk
Dept. BioMedical Physics
Aberdeen University
Foresterhill Fax: +44 (0)1224-685645
Aberdeen AB25 2ZD Telephone: +44 (0)1224-553210
Scotland, UK
Return-Path: <don_mccall at hp.com>
Delivered-To: samba at samba.org
Received: from palrel1.hp.com (palrel1.hp.com [156.153.255.242]) by
lists.samba.org (Postfix) with ESMTP id E0B264FE3 for
<samba at samba.org>; Tue, 22 May 2001 10:06:21 -0700 (PDT)
Received: from amrelay2.boi.hp.com (amrelay2.boi.hp.com [15.56.8.41]) by
palrel1.hp.com (Postfix) with ESMTP id 8669836C; Tue, 22 May 2001
10:07:12 -0700 (PDT)
Received: from xatlbh4.atl.hp.com (xatlbh4.atl.hp.com [15.45.89.189]) by
amrelay2.boi.hp.com (8.9.3 (PHNE_18979)/8.9.3 SMKit7.02) with ESMTP id
LAA25024; Tue, 22 May 2001 11:07:10 -0600 (MDT)
Received: by xatlbh4.atl.hp.com with Internet Mail Service (5.5.2653.19)
id <LCBCH9SM>; Tue, 22 May 2001 13:07:10 -0400
Message-ID: <079FD72E42C9D311B854009027650E6F04050A5E at xatl02.atl.hp.com>
From: "MCCALL,DON (HP-USA,ex1)" <don_mccall at hp.com>
To: "'Keith Muska'" <kmuska at CLEMENTSMFG.COM>, samba at samba.org
Subject: RE: Question about %U
Date: Tue, 22 May 2001 13:07:07 -0400
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi Keith,
nobody is the default guest account for Samba. %U maps to whatever UNIX
user
the pc username maps to. So the initial connection to samba is being made
via
a guest login, so the %U maps to the guest account, which is nobody, thus
the
nobody.log file being created. Once your pc actually negotiates a session
(sessionsetup&x) with your actual pc username, then samba can create the
logfile
with the username.log name. I suspect the initial nobody.log is being
generated
by the initial attachment to IPC$ via a null session name setup, which is
used
to browse the server (ie get a list of shares on the server). Once you
actually
attach to a share, the session is set up using your pc username in the
session
setup request.
Hope this helps,
Don
-----Original Message-----
From: Keith Muska [mailto:kmuska at CLEMENTSMFG.COM]
Sent: Tuesday, May 22, 2001 10:07 AM
To: samba at samba.org
Subject: Question about %U
Hello. I have a question about the %U variable. I have a line is smb.conf
that reads "log file = /var/log/samba/%U.log" I was expecting this to
create log files that listed the username. However, When a machine first
connects to the server a "nobody.log" file is created. Then after a couple
minutes of use another file is created with the proper user name. Why does
the %U variable thinks my machines are logged in as nobody for a few minutes
and then corrects itself later?? Also, This behavior only seems to occur
when the Samba server is acting as a Local Master.
Any Information would be greatly appreciated.
RedHat 7.1 i686 2.4.2 kernel
Samba 2.0.7-36
Windows 98 SE Clients.
Thank You,
Keith Muska
Clements Manufacturing, L.L.C.
810.376.2215 X 170
Fax 253.681.7311
mailto:kmuska at clementsmfg.com
http://www.clementsmfg.com
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <don_mccall at hp.com>
Delivered-To: samba at lists.samba.org
Received: from atlrel1.hp.com (atlrel1.hp.com [156.153.255.210]) by
lists.samba.org (Postfix) with ESMTP id 90F385073 for
<samba at lists.samba.org>; Tue, 22 May 2001 10:32:09 -0700 (PDT)
Received: from xatlrelay1.atl.hp.com (xatlrelay1.atl.hp.com
[15.45.89.190]) by atlrel1.hp.com (Postfix) with ESMTP id 0DAF74FC;
Tue, 22 May 2001 13:33:00 -0400 (EDT)
Received: from xpabh2.corp.hp.com (xpabh2.corp.hp.com [15.58.136.192])
by xatlrelay1.atl.hp.com (Postfix) with ESMTP id BA3571F50A; Tue, 22
May 2001 07:31:58 -0400 (EDT)
Received: by xpabh2.corp.hp.com with Internet Mail Service (5.5.2653.19)
id <KTD56LVK>; Tue, 22 May 2001 10:32:52 -0700
Message-ID: <079FD72E42C9D311B854009027650E6F04050A5F at xatl02.atl.hp.com>
From: "MCCALL,DON (HP-USA,ex1)" <don_mccall at hp.com>
To: 'Tim Wunder' <wundertp at rescobaltimore.com>, samba at lists.samba.org
Subject: RE: File Permissions
Date: Tue, 22 May 2001 10:32:38 -0700
MIME-Version: 1.0
X-Mailer: Internet Mail Service (5.5.2653.19)
Content-Type: text/plain; charset="iso-8859-1"
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi Tim,
The problem is that the absence of unix write permission on a file only
protects the CONTENTS of that file from being changed. The file NAME, and
whether it exists or
not is a function of the DIRECTORY in which it is contained. So if a user
has 'w'
access to the directory, he can modify the directory entry for a file
(delete a file,
create a file, rename(mv) a file).
You can try the following (I haven't tested this...)
in smb.conf, on theshare that you want this behavior:
delete readonly = no (default)
create mask = 544 (this will ensure that any file created will be created
with the 'readonly' attribute set.
Since ONLY the owner of the file can modify permissions on the file, no one
will be able to delete or rename the file unless the OWNER of the file
clears the readonly attribute.
Of course, this ALSO means that the owner himself will not be able to modify
the file until he clears the readonly attribute. And he would then have to
set the readonly attribute back on the file afterwards.
This is a really ugly way to do this, but other than changing your directory
mask to be 755
instead of 775 (so that group and other do not have write permission to the
directory, thus keeping them from deleting or moving files in the directory)
I don't know of another way. Problem with directory mask 755 is that ONLY
owner will be able to create files in the directory, group members will not.
If that's not a problem in your situation, I would vote for this method
before the 'readonly' hack above...
Hope this helps,
Don
-----Original Message-----
From: Tim Wunder [mailto:wundertp at rescobaltimore.com]
Sent: Tuesday, May 22, 2001 9:15 AM
To: samba at lists.samba.org
Subject: File Permissions
Hi,
New to the list, apologies if this has been adressed before.
Win 2K Pro SP1, Samba 2.2.0, RedHat 7.0
I asked this on the newsgroup and no one has responded, yet. Any ideas
on how to make this work?
We have a Management share, mgt, that is only visible to management. All
members of group mgt have read access to the files. I also want to allow
those in that group to create directories beneath all existing
directories. But, I don't want to allow users to be able to change or
modify other users files.
The share is configured with a create mask of 0744, and a directory mask
of 0775. @mgt is listed in the write list for the share.
If the user's default group is mgt and he or she can read and write on
the mgt share fine. When he/she create a folder, or directory, on the
mgt share, it gets the group mgt, with rwxrwxr-x permissions (0775),
which is OK. When they create a file in the folder, it gets group mgt
with permissions rwxr--r-- (0744), again, this is OK. Another user in
the mgt group can open the file and read it, but they cannot open it,
edit it and save it, unless they save it as another file.
The problem is, that same user, who can't EDIT the file from an
application, can re-name it AND delete it. So, if they want to EDIT the
file, they just open it, save it under another name, delete the original
and rename the new one back to the original. Now they have read/write
permission on the file.
Is it possible to prevent this?
Regards,
Tim
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <dyeager at teleport.com>
Delivered-To: samba at lists.samba.org
Received: from qmail.arl.qwestip.net (qmail.qwestip.net [205.171.7.14])
by lists.samba.org (Postfix) with SMTP id C4A1F45BE for
<samba at lists.samba.org>; Tue, 22 May 2001 10:57:43 -0700 (PDT)
Received: (qmail 20826 invoked from network); 22 May 2001 17:57:50 -0000
Received: from unknown (HELO darriny) ([63.237.228.227])
(envelope-sender <dyeager at teleport.com>) by mail.qwestisp.net
(qmail-ldap-1.03) with SMTP for <samba at lists.samba.org>; 22 May 2001
17:57:50 -0000
Message-ID: <001b01c0e2e8$d0620a30$6f0510ac at darriny>
From: "Darrin Yeager" <dyeager at teleport.com>
To: <samba at lists.samba.org>
Subject: Samba & ipchains
Date: Tue, 22 May 2001 10:58:05 -0700
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4522.1200
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I'm trying to setup ipchains rules for samba - I'm allowing both udp and
tcp traffic on ports 137-139 but it doesn't work - the log says "domain
password server not available" when I'm trying to connect to a share (and I
get a password dialog box, which I shouldn't since I'm using domain
security) so I must be missing a port or something - I think somewhere I'm
rejecting a packet on a port used for domain security, but don't know which
one.
Disabling IPCHAINS rules allows samba to work fine, so I know it's in the
firewall rules.
Any ideas?
Return-Path: <dm at belkam.com>
Delivered-To: samba at samba.org
Received: from pipe.aspec.ru (pipe.aspec.ru [195.161.29.125]) by
lists.samba.org (Postfix) with ESMTP id A81EB50AB for
<samba at samba.org>; Tue, 22 May 2001 11:10:58 -0700 (PDT)
Received: from dmsystems (dm.dialup.aspec.ru [195.161.29.106]) by
pipe.aspec.ru (8.11.1/8.11.1) with SMTP id f4MIBhQ10258 for
<samba at samba.org>; Tue, 22 May 2001 23:11:44 +0500 (SAMST)
Message-ID: <000501c0e2f4$005f0a20$6a1da1c3 at dmsystems>
From: "Dmitry Melekhov" <dm at belkam.com>
To: <samba at samba.org>
Subject: linux 2.2 vs linux 2.4 samba performance
Date: Tue, 22 May 2001 23:18:35 +0400
MIME-Version: 1.0
Content-Type: text/plain; charset="koi8-r"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.00.2615.200
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hello!
Are there any benchmarks?
I'm thinking about moving file server with samba 2.0.7 and about 80 clients
from 2.2.14pre1 kernel (sic! ;) ) to 2.4.4.
Wire connection and Windows reinstallation senior engineer
Dmitry Melekhov
http://www.belkam.com/~dm
2:5050/11.23 at fidonet
Return-Path: <urban at teststation.com>
Delivered-To: samba at lists.samba.org
Received: from fungus.svenskatest.se (fungus.teststation.com
[212.32.186.211]) by lists.samba.org (Postfix) with ESMTP id B794847EE
for <samba at lists.samba.org>; Tue, 22 May 2001 11:20:21 -0700 (PDT)
Received: from fw.teststation.com (srvfwume.svenskatest.se
[212.32.186.210]) by fungus.svenskatest.se (8.9.3/8.9.3) with SMTP id
UAA05355; Tue, 22 May 2001 20:20:55 +0200 (MET DST)
Received: from COLA by fw.teststation.com via smtpd (for
fungus.teststation.com [212.32.186.211]) with SMTP; 22 May 2001
17:57:17 UT
Date: Tue, 22 May 2001 20:20:53 +0200 (CEST)
From: Urban Widmark <urban at teststation.com>
X-Sender: <puw at cola.teststation.com>
To: <edgar at soldin.de>
Cc: <samba at lists.samba.org>
Subject: Re: no password option, adding -n while automounting, though
pass is defined
In-Reply-To: <3B0A6515.44582127 at hs-harz.de>
Message-ID: <Pine.LNX.4.30.0105222007040.22460-100000 at cola.teststation.c
om>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Tue, 22 May 2001, Edgar Soldin wrote:
> May 22 15:01:48 mir automount[7585]: do_mount //wh4-511/dude
> /home/u13471/wh4-511/dude type smbfs options
> username=andreas,password=schnabel using module smbfs
> May 22 15:01:48 mir automount[7585]: mount(smbfs): no password option,
> adding -n
Upgrade your autofs, 3.1.5 should work but just get the latest (3.1.7)
from your local ftp.kernel.org mirror
ftp://ftp.de.kernel.org/pub/linux/daemons/autofs/
Older autofs versions "knew" about smbfs and tried to send the right
options (such as -n).
Check that you use smbmount from samba 2.0.6 or later.
/Urban
Return-Path: <urban at teststation.com>
Delivered-To: samba at lists.samba.org
Received: from fungus.svenskatest.se (fungus.teststation.com
[212.32.186.211]) by lists.samba.org (Postfix) with ESMTP id 843D14262
for <samba at lists.samba.org>; Tue, 22 May 2001 11:48:52 -0700 (PDT)
Received: from fw.teststation.com (srvfwume.svenskatest.se
[212.32.186.210]) by fungus.svenskatest.se (8.9.3/8.9.3) with SMTP id
UAA05539; Tue, 22 May 2001 20:49:34 +0200 (MET DST)
Received: from COLA by fw.teststation.com via smtpd (for
fungus.teststation.com [212.32.186.211]) with SMTP; 22 May 2001
18:25:56 UT
Date: Tue, 22 May 2001 20:49:32 +0200 (CEST)
From: Urban Widmark <urban at teststation.com>
X-Sender: <puw at cola.teststation.com>
To: Lee Howard <faxguy at deanox.com>
Cc: <samba at lists.samba.org>
Subject: Re: smbmount error after 2.2.0 upgrade
In-Reply-To: <3.0.6.32.20010522093743.00f32300 at server.deanox.com>
Message-ID: <Pine.LNX.4.30.0105222030090.22460-100000 at cola.teststation.c
om>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
On Tue, 22 May 2001, Lee Howard wrote:
> >You have specified when configuring the kernel that you want NLS support
> >in smbfs and probably given it iso8859-1 as the default. It tries to load
> >it but can't find it, so it complains. samba 2.0.7 or 2.2.0 shouldn't
> >matter, I think you changed something else too (like a kernel recompile).
>
> Actually, I checked on this, and I have *not* specified NLS support in the
> kernel.
You get nls support when you include any of smbfs, fat, joliet, ntfs,
ncpfs. And the default charset is iso8859-1.
My question was supposed to be about CONFIG_SMB_NLS_DEFAULT, but you don't
need to enable that to make smbfs want that charset (which is a bug, but a
harmless one).
To get rid of the message, reconfigure and recompile your kernel with the
nls module included. Something like:
make menuconfig
Enable the iso8859-1 module in "file systems->native language support"
make modules modules_install
(no need to recompile the whole thing)
> >"failed to load nls" shouldn't be fatal, it should still mount the
> >filesystem.
>
> It doesn't mount it.
It should, it does for me. The message that it can't load the module is
just a warning. The error is ignored and it selects memcpy as it's
translation function.
If it fails to mount the fs that has nothing to do with the message about
the charset.
The message "entering daemon mode ..." that is in your logs are only
printed after smbmount has mounted the fs and then send the connection
with the server to smbfs.
I still think that it has mounted the filesystem. Check the output from
'cat /proc/mounts' and/or 'mount'.
/Urban
Return-Path: <ser at linux.lo14.wroc.pl>
Delivered-To: samba at lists.samba.org
Received: from linux.lo14.wroc.pl (linux.lo14.wroc.pl [156.17.220.9]) by
lists.samba.org (Postfix) with SMTP id 2E91A4BEE for
<samba at lists.samba.org>; Tue, 22 May 2001 11:59:43 -0700 (PDT)
Received: (qmail 27689 invoked by uid 501); 22 May 2001 19:02:24 -0000
Date: Tue, 22 May 2001 21:02:24 +0200
From: --s+ <ser at metalab.unc.edu>
To: Darrin Yeager <dyeager at teleport.com>
Cc: samba at lists.samba.org
Subject: Re: Samba & ipchains
Message-ID: <20010522210224.A27482 at linux.lo14.wroc.pl>
References: <001b01c0e2e8$d0620a30$6f0510ac at darriny>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2.5i
In-Reply-To: <001b01c0e2e8$d0620a30$6f0510ac at darriny>; from
dyeager at teleport.com on wto, maj 22, 2001 at 10:58:05 -0700
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
> Disabling IPCHAINS rules allows samba to work fine, so I know it's in the
> firewall rules.
general answer: please use iptraf or tcpdump tools to see what is going on.
--s+
Return-Path: <jhill2 at maine.rr.com>
Delivered-To: samba at lists.samba.org
Received: from mail.maine.rr.com (smtp-server.maine.rr.com
[204.210.65.65]) by lists.samba.org (Postfix) with ESMTP id D1C0850E3
for <samba at lists.samba.org>; Tue, 22 May 2001 12:17:46 -0700 (PDT)
Received: from jhill ([24.25.180.29]) by mail.maine.rr.com (Post.Office
MTA v3.5.3 release 223 ID# 0-59787U250000L250000S0V35) with SMTP id
com; Tue, 22 May 2001 15:22:19 -0400
Message-ID: <00ba01c0e2f3$6b778860$d500a8c0 at sawmillmanager.com>
From: "John Hill" <jhill at sawmillmanager.com>
To: "Tim Wunder" <wundertp at rescobaltimore.com>, <samba at lists.samba.org>
References: <3B0A6658.1260353A at rescobaltimore.com>
Subject: Re: File Permissions
Date: Tue, 22 May 2001 15:14:26 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4522.1200
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I tried this on an SCO OpenServer 5.0.5 system and had the same problem you
described. After a little research I found that if you set the sticky bit
on the directory then only root and the owner of the file can delete it.
You should be able to use chmod 1775 to do this. I did all of my testing on
the Unix system without involving Samba so you may want to try that out.
Since the directory mask allows 4 characters I assumed it would work.
John Hill
Logical Systems, Inc.
258 Main Street
P.O. Box 649
Yarmouth, ME 04096
Phone: (207) 846-3669
Fax: (207) 846-3804
E-Mail: jhill at sawmillmanager.com
----- Original Message -----
From: "Tim Wunder" <wundertp at rescobaltimore.com>
To: <samba at lists.samba.org>
Sent: Tuesday, May 22, 2001 9:15 AM
Subject: File Permissions
Hi,
New to the list, apologies if this has been adressed before.
Win 2K Pro SP1, Samba 2.2.0, RedHat 7.0
I asked this on the newsgroup and no one has responded, yet. Any ideas
on how to make this work?
We have a Management share, mgt, that is only visible to management. All
members of group mgt have read access to the files. I also want to allow
those in that group to create directories beneath all existing
directories. But, I don't want to allow users to be able to change or
modify other users files.
The share is configured with a create mask of 0744, and a directory mask
of 0775. @mgt is listed in the write list for the share.
If the user's default group is mgt and he or she can read and write on
the mgt share fine. When he/she create a folder, or directory, on the
mgt share, it gets the group mgt, with rwxrwxr-x permissions (0775),
which is OK. When they create a file in the folder, it gets group mgt
with permissions rwxr--r-- (0744), again, this is OK. Another user in
the mgt group can open the file and read it, but they cannot open it,
edit it and save it, unless they save it as another file.
The problem is, that same user, who can't EDIT the file from an
application, can re-name it AND delete it. So, if they want to EDIT the
file, they just open it, save it under another name, delete the original
and rename the new one back to the original. Now they have read/write
permission on the file.
Is it possible to prevent this?
Regards,
Tim
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <ngoldber at mitre.org>
Delivered-To: samba at lists.samba.org
Received: from smtpproxy1.mitre.org (mb-20-100.mitre.org
[129.83.20.100]) by lists.samba.org (Postfix) with ESMTP id 17B614B72
for <samba at lists.samba.org>; Tue, 22 May 2001 12:43:47 -0700 (PDT)
Received: from avsrv1.mitre.org (avsrv1.mitre.org [129.83.20.58]) by
smtpproxy1.mitre.org (8.9.3/8.9.3) with ESMTP id PAA02982; Tue, 22 May
2001 15:44:25 -0400 (EDT)
Received: from MAILHUB1 (mailhub1.mitre.org [129.83.20.31]) by
smtpsrv1.mitre.org (8.9.3/8.9.3) with ESMTP id PAA09044; Tue, 22 May
2001 15:44:24 -0400 (EDT)
Received: from loki.mitre.org (128.29.96.69) by mailhub1.mitre.org with
SMTP id 6563011; Tue, 22 May 2001 15:44:12 -0400
Message-ID: <3B0AC196.7B589D49 at mitre.org>
Date: Tue, 22 May 2001 15:44:22 -0400
From: root <ngoldber at mitre.org>
X-Mailer: Mozilla 4.73C-20000818M [en] (X11; U; Linux 2.2.17 i686)
X-Accept-Language: en
MIME-Version: 1.0
To: wundertp at rescobaltimore.com, samba at lists.samba.org
Subject: Rename and Delete... (samba mgt share permissions troubles)
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
This is not an issue with Samba. This is an issue with how Unix
directory permissions are handled
Effectively, in order to create a directory in Unix, you need write
permission to the parent directory. But that also gives you permission
to rename AND delete files in that directory too. All three of these
operations are equivalent, you are just modifying the contents of the
parent directory.You cannot get any one of these permissions without the
others.
This has always been a problem. There is a solution however (in Linux,
Solaris, and other modern Unicies).
There is something called the "sticky bit" in a permission mask. When
applied to a directory, only the OWNER of a directory can remove and
rename files, regardless of whether you can add new files. In this case,
you need to make the directory create mask "1775". The extra one
signifies the "sticky bit". I think this is exactly what you want.
Neil
Return-Path: <jhill2 at maine.rr.com>
Delivered-To: samba at lists.samba.org
Received: from mail.maine.rr.com (smtp-server.maine.rr.com
[204.210.65.65]) by lists.samba.org (Postfix) with ESMTP id 5144945A6
for <samba at lists.samba.org>; Tue, 22 May 2001 13:14:29 -0700 (PDT)
Received: from jhill ([24.25.180.29]) by mail.maine.rr.com (Post.Office
MTA v3.5.3 release 223 ID# 0-59787U250000L250000S0V35) with SMTP id
com; Tue, 22 May 2001 16:19:01 -0400
Message-ID: <003201c0e2fb$685bf6e0$d500a8c0 at sawmillmanager.com>
From: "John Hill" <jhill at sawmillmanager.com>
To: "root" <ngoldber at mitre.org>, <wundertp at rescobaltimore.com>,
<samba at lists.samba.org>
References: <3B0AC196.7B589D49 at mitre.org>
Subject: Re: Rename and Delete... (samba mgt share permissions troubles)
Date: Tue, 22 May 2001 16:11:36 -0400
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4522.1200
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I did a little more testing and found that as previously stated the owner of
the directory can delete files reguardless of the owner of the file.
However, if I changed the owner of the directory to root then only the owner
of the file could delete it.
John Hill
Logical Systems, Inc.
258 Main Street
P.O. Box 649
Yarmouth, ME 04096
Phone: (207) 846-3669
Fax: (207) 846-3804
E-Mail: jhill at sawmillmanager.com
----- Original Message -----
From: "root" <ngoldber at mitre.org>
To: <wundertp at rescobaltimore.com>; <samba at lists.samba.org>
Sent: Tuesday, May 22, 2001 3:44 PM
Subject: Rename and Delete... (samba mgt share permissions troubles)
This is not an issue with Samba. This is an issue with how Unix
directory permissions are handled
Effectively, in order to create a directory in Unix, you need write
permission to the parent directory. But that also gives you permission
to rename AND delete files in that directory too. All three of these
operations are equivalent, you are just modifying the contents of the
parent directory.You cannot get any one of these permissions without the
others.
This has always been a problem. There is a solution however (in Linux,
Solaris, and other modern Unicies).
There is something called the "sticky bit" in a permission mask. When
applied to a directory, only the OWNER of a directory can remove and
rename files, regardless of whether you can add new files. In this case,
you need to make the directory create mask "1775". The extra one
signifies the "sticky bit". I think this is exactly what you want.
Neil
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <wundertp at rescobaltimore.com>
Delivered-To: samba at lists.samba.org
Received: from hermes.toad.net (hermes.toad.net [162.33.130.251]) by
lists.samba.org (Postfix) with ESMTP id A9FFA5144 for
<samba at lists.samba.org>; Tue, 22 May 2001 14:00:52 -0700 (PDT)
Received: from rescobaltimore.com (resco.dslwan.toad.net
[162.33.157.18]) by hermes.toad.net (8.11.0/8.11.0) with ESMTP id
f4ML1DY02853 for <samba at lists.samba.org>; Tue, 22 May 2001 17:01:23
-0400
Message-ID: <3B0AD3AA.93EE6A99 at rescobaltimore.com>
Date: Tue, 22 May 2001 17:01:30 -0400
From: Tim Wunder <wundertp at rescobaltimore.com>
Organization: RESCO/Baltimore
X-Mailer: Mozilla 4.76 [en] (Windows NT 5.0; U)
X-Accept-Language: en,pdf
MIME-Version: 1.0
To: samba at lists.samba.org
Subject: Re: File Permissions
References: <3B0A6658.1260353A at rescobaltimore.com>
<00ba01c0e2f3$6b778860$d500a8c0 at sawmillmanager.com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi John,
John Hill wrote:
>
> I tried this on an SCO OpenServer 5.0.5 system and had the same problem you
> described. After a little research I found that if you set the sticky bit
> on the directory then only root and the owner of the file can delete it.
> You should be able to use chmod 1775 to do this. I did all of my testing on
> the Unix system without involving Samba so you may want to try that out.
> Since the directory mask allows 4 characters I assumed it would work.
>
Well, the sticky bit trick works if you chmod the directory from linux.
Samba, however, will not create the directory with the sticky bit. I
tried from SWAT and by manually adding the directory mask = 1775 to the
smb.conf file. (SWAT puts 01775 for whatever reason). Regardless, samba
creates the directory as 0775 in both cases. Is this a bug in samba,
perhaps?
I also toyed with giving the group write permission to the share's main
directory, and making the mask 0755. That way, each user can create and
control their own directory structure under mgt, and others can't delete
or rename the files, but can read them. If I need a share where users
can edit each other's files, I can create a new share with a 0775 mask.
This is a reasonable workaround for me at this point.
Perhaps samba's seeming lack of support for linux' sticky bit will be
corrected in the future.
Regards,
Tim
> John Hill
> Logical Systems, Inc.
> 258 Main Street
> P.O. Box 649
> Yarmouth, ME 04096
>
> Phone: (207) 846-3669
> Fax: (207) 846-3804
> E-Mail: jhill at sawmillmanager.com
> ----- Original Message -----
> From: "Tim Wunder" <wundertp at rescobaltimore.com>
> To: <samba at lists.samba.org>
> Sent: Tuesday, May 22, 2001 9:15 AM
> Subject: File Permissions
>
> Hi,
> New to the list, apologies if this has been adressed before.
>
> Win 2K Pro SP1, Samba 2.2.0, RedHat 7.0
>
> I asked this on the newsgroup and no one has responded, yet. Any ideas
> on how to make this work?
>
> We have a Management share, mgt, that is only visible to management. All
> members of group mgt have read access to the files. I also want to allow
> those in that group to create directories beneath all existing
> directories. But, I don't want to allow users to be able to change or
> modify other users files.
>
> The share is configured with a create mask of 0744, and a directory mask
> of 0775. @mgt is listed in the write list for the share.
>
> If the user's default group is mgt and he or she can read and write on
> the mgt share fine. When he/she create a folder, or directory, on the
> mgt share, it gets the group mgt, with rwxrwxr-x permissions (0775),
> which is OK. When they create a file in the folder, it gets group mgt
> with permissions rwxr--r-- (0744), again, this is OK. Another user in
> the mgt group can open the file and read it, but they cannot open it,
> edit it and save it, unless they save it as another file.
>
> The problem is, that same user, who can't EDIT the file from an
> application, can re-name it AND delete it. So, if they want to EDIT the
> file, they just open it, save it under another name, delete the original
> and rename the new one back to the original. Now they have read/write
> permission on the file.
>
> Is it possible to prevent this?
>
> Regards,
> Tim
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: http://lists.samba.org/mailman/listinfo/samba
Return-Path: <matthew at sackman.co.uk>
Delivered-To: samba at lists.samba.org
Received: from cmailg7.svr.pol.co.uk (cmailg7.svr.pol.co.uk
[195.92.195.177]) by lists.samba.org (Postfix) with ESMTP id D753D5153
for <samba at lists.samba.org>; Tue, 22 May 2001 14:02:47 -0700 (PDT)
Received: from [195.92.67.23] (helo=mail18.svr.pol.co.uk) by
cmailg7.svr.pol.co.uk with esmtp (Exim 3.13 #0) id 152JJW-0008C8-00
for samba at lists.samba.org; Tue, 22 May 2001 22:03:34 +0100
Received: from modem-155.florida.dialup.pol.co.uk ([62.137.60.155]
helo=namkas) by mail18.svr.pol.co.uk with esmtp (Exim 3.13 #0) id
152JJV-0004DJ-00 for samba at lists.samba.org; Tue, 22 May 2001 22:03:33
+0100
Received: by namkas (Postfix, from userid 1000) id 3FE0F445; Tue, 22 May
2001 22:04:33 +0100 (BST)
Date: Tue, 22 May 2001 22:04:33 +0100
To: samba at lists.samba.org
Subject: Network printing HP 840C over Samba
Message-ID: <20010522220433.A6455 at sackman.co.uk>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.3.15i
From: matthew at sackman.co.uk (Matthew Sackman)
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hay all.
I've been setting up a linux gateway for a friend who has got a DSL connection
and three windows me boxes in a home network. Everything has gone smoothly
with Debian Woody and a freshly compiled 2.4.4 kernel and data transfer rates
have risen by three fold due to having a linux gateway instead of an Windows
ME gateway.
However, I've had horrible problems setting up network printing. I've got Samba
set up and that is working fine with various shares that I've set up. I've
finally managed to get CUPS set up with the HP 840C, Foomatic + cdj550 which
will print the test page and does so in colour (impressive indeed)!
But, I can not get any of the windows boxes to print to this printer. In my
samba smb.cnf file I have the following:
[global]
printing = cups
And that's all in the global section. Then:
[printers]
comment = All Printers
browseable = no
guest ok = true
path = /tmp
printable = yes
public = yes
writable = yes
create mode = 0700
The cups is set up as a parallel printer URI parallel:/dev/lp0 and there is
no internal firewall. In /etc/printcap I have:
DeskJet:
which is the name of the printer as defined in cups. Now, all the windows boxes
say they can see this printer, but none print successfully to it. I've
downloaded and installed the latest drivers from the HP site and installed them.
Are there any special settings that I should know about? The hp site says that
these drivers arn't designed for network printing but the printer has worked
from a windows box server.
I am desperate here - I can not figure out why this isn't working. CUPS doesn't
even register that the windows clients are trying to send a print job to the
printer, and printing causes samba and cups to freeze on the server, requiring
a restart of those services.
I'm not particularly bothered about using CUPS - if someone has this printer
(or similar) working successfully under LPRng (or equiv) then I'd be very
grateful to hear about it. I just really need this printer working.
Thanks in advance for any help you can offer me.
Matthew
--
Matthew Sackman
Nottingham,
ENGLAND
Using Debian/GNU Linux
Enjoying computing
Return-Path: <wundertp at rescobaltimore.com>
Delivered-To: samba at lists.samba.org
Received: from hermes.toad.net (hermes.toad.net [162.33.130.251]) by
lists.samba.org (Postfix) with ESMTP id F10865107 for
<samba at lists.samba.org>; Tue, 22 May 2001 14:08:15 -0700 (PDT)
Received: from rescobaltimore.com (resco.dslwan.toad.net
[162.33.157.18]) by hermes.toad.net (8.11.0/8.11.0) with ESMTP id
f4ML8uY03522; Tue, 22 May 2001 17:08:56 -0400
Message-ID: <3B0AD583.99AE3C64 at rescobaltimore.com>
Date: Tue, 22 May 2001 17:09:23 -0400
From: Tim Wunder <wundertp at rescobaltimore.com>
Organization: RESCO/Baltimore
X-Mailer: Mozilla 4.76 [en] (Windows NT 5.0; U)
X-Accept-Language: en,pdf
MIME-Version: 1.0
To: root <ngoldber at mitre.org>
Cc: samba at lists.samba.org
Subject: Re: Rename and Delete... (samba mgt share permissions troubles)
References: <3B0AC196.7B589D49 at mitre.org>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi Neil
root wrote:
>
> This is not an issue with Samba. This is an issue with how Unix
> directory permissions are handled
>
I'm afraid it still might be a samba problem, I can't seem to get samba
to create the share with the sticky bit. When I manually chmod 1775 the
directories, wverything behaves as I want. I just can't get samba to
create the share that way.
> Effectively, in order to create a directory in Unix, you need write
> permission to the parent directory. But that also gives you permission
> to rename AND delete files in that directory too. All three of these
> operations are equivalent, you are just modifying the contents of the
> parent directory.You cannot get any one of these permissions without the
> others.
>
I disagree that all three of those activities are "equivalent".
Unix/linux handles them as if they were, but they are not. You are not
"just modifying the contents of the parent directory" when you delete.
When you delete, you are essentially setting the contents of the file to
null. Also, it seems logical that a file's name be considered part of
it's contents. Changing it's name should be interpretted that way.
Regards,
Tim
> This has always been a problem. There is a solution however (in Linux,
> Solaris, and other modern Unicies).
>
> There is something called the "sticky bit" in a permission mask. When
> applied to a directory, only the OWNER of a directory can remove and
> rename files, regardless of whether you can add new files. In this case,
> you need to make the directory create mask "1775". The extra one
> signifies the "sticky bit". I think this is exactly what you want.
>
> Neil
Return-Path: <eivynn at online.no>
Delivered-To: samba at lists.samba.org
Received: from mail45.fg.online.no (mail45-s.fg.online.no
[148.122.161.45]) by lists.samba.org (Postfix) with ESMTP id 0E5B5515D
for <samba at lists.samba.org>; Tue, 22 May 2001 14:11:28 -0700 (PDT)
Received: from epostleser.online.no (epostleser.online.no
[148.122.0.114]) by mail45.fg.online.no (8.9.3/8.9.3) with ESMTP id
XAA02591 for <samba at lists.samba.org>; Tue, 22 May 2001 23:12:16 +0200
(MET DST)
X-WebMail-UserID: eivynn at online.no
Date: Tue, 22 May 2001 23:13:20 +0200
From: eivynn <eivynn at online.no>
To: samba at lists.samba.org
X-EXP32-SerialNo: 50000140
Subject: Problem setting path for home-dir
Message-ID: <3B0BAB6B at epostleser.online.no>
Mime-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: InterChange (Hydra) SMTP v3.61.08
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Dear Sirs,
I have used Samba v2.0.7 before and had the following section in my SMB.CONF:
[homes]
path = /home/%U/files
Comment = Home dirs
.
.
.
Also I had "NET USE P: //FORTIDEN/HOMES" in my logon-file.
How can this be done in Samba v.2.2.0 ? Samba allways defaults to the "path =
/home/%U" setting and uses the username as share name. This is really
annoying... Any suggestions?
Sincerely Eivinn Hustveit
University student
Return-Path: <eivynn at online.no>
Delivered-To: samba at lists.samba.org
Received: from mail48.fg.online.no (mail48-s.fg.online.no
[148.122.161.48]) by lists.samba.org (Postfix) with ESMTP id 6A0305173
for <samba at lists.samba.org>; Tue, 22 May 2001 14:18:13 -0700 (PDT)
Received: from epostleser.online.no (epostleser.online.no
[148.122.0.114]) by mail48.fg.online.no (8.9.3/8.9.3) with ESMTP id
XAA18055 for <samba at lists.samba.org>; Tue, 22 May 2001 23:19:02 +0200
(MET DST)
X-WebMail-UserID: eivynn at online.no
Date: Tue, 22 May 2001 23:20:06 +0200
From: eivynn <eivynn at online.no>
To: samba at lists.samba.org
X-EXP32-SerialNo: 50000140
Subject: VPN and Samba
Message-ID: <3B0BAE57 at epostleser.online.no>
Mime-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: InterChange (Hydra) SMTP v3.61.08
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Dear Sirs,
Does anyone know how I can setup VPN with my Linux box to reach and logon to
Samba (on the same box) through the Internet?
I will need help to set up both clients and server, please.
Sincerely Eivin Hustveit
University Student
Return-Path: <bunny at hao.ucar.edu>
Delivered-To: samba at lists.samba.org
Received: from jabba.hao.ucar.edu (jabba.hao.ucar.edu [128.117.16.5]) by
lists.samba.org (Postfix) with ESMTP id 07F14517A for
<samba at lists.samba.org>; Tue, 22 May 2001 14:19:55 -0700 (PDT)
Received: from bob (bob.hao.ucar.edu [128.117.16.39]) by
jabba.hao.ucar.edu (8.9.0/8.9.0) with SMTP id PAA09539 for
<samba at lists.samba.org>; Tue, 22 May 2001 15:20:44 -0600 (MDT)
Message-Id: <200105222120.PAA09539 at jabba.hao.ucar.edu>
Date: Tue, 22 May 2001 15:20:36 -0600 (MDT)
From: Bunny Pfau <bunny at hao.ucar.edu>
Reply-To: Bunny Pfau <bunny at hao.ucar.edu>
Subject: Re: Rename and Delete... (samba mgt share permissions troubles)
To: samba at lists.samba.org
MIME-Version: 1.0
Content-Type: TEXT/plain; charset=us-ascii
Content-MD5: XY/ei9yuDUYD1zdGVsptqA==
X-Mailer: dtmail 1.3.0 @(#)CDE Version 1.3.4p_5 SunOS 5.7 sun4u sparc
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
->
-> I disagree that all three of those activities are "equivalent".
-> Unix/linux handles them as if they were, but they are not. You are not
-> "just modifying the contents of the parent directory" when you delete.
-> When you delete, you are essentially setting the contents of the file to
-> null. Also, it seems logical that a file's name be considered part of
-> it's contents. Changing it's name should be interpretted that way.
->
-> Regards,
-> Tim
Indeed you are "just modifying the contents of the parent directory" when
deleting a file under UNIX.
The directory is the place that stores the name of the file and references
the inode, which itself contains and references the file contents.
When you remove a file, you are altering the directory, and, of course,
putting that inode back on the free-inode list and the associated blocks
back on the free block list. But you aren't truly "setting the contents
of the file to null." You're only indicating that that inode and those
blocks are available to be reused. It serves the same purpose, but
the operation is somewhat different.
Bunny Pfau
Return-Path: <Joe_Pfaltzgraff at patapsco.com>
Delivered-To: samba at lists.samba.org
Received: from pm01sm.rst.cw.net (PM01SM.RST.CW.NET [204.71.247.136]) by
lists.samba.org (Postfix) with ESMTP id 22C9A516E for
<samba at lists.samba.org>; Tue, 22 May 2001 14:24:56 -0700 (PDT)
Received: from Blackfoot.patapsco (mail.patapsco.com [206.99.206.98]) by
PM01SM.RST.CW.NET (PMDF V5.2-33 #42201) with ESMTP id
<0GDR003OLA6T5I at PM01SM.RST.CW.NET> for samba at lists.samba.org; Tue, 22
May 2001 21:25:41 +0000 (GMT)
Received: from patapsco.com (bendigo.patapsco [192.9.200.190]) by
Blackfoot.patapsco (8.9.3/8.8.7) with SMTP id RAA18460; Tue, 22 May
2001 17:25:43 -0400
Received: by patapsco.com(Lotus SMTP MTA v4.6.5 (863.2 5-20-1999)) id
85256A54.0075B52A ; Tue, 22 May 2001 17:25:40 -0400
Date: Tue, 22 May 2001 17:25:35 -0400
From: Joe_Pfaltzgraff at patapsco.com
Subject: Re: File Permissions
To: Tim Wunder <wundertp at rescobaltimore.com>
Cc: samba at lists.samba.org
Message-id: <85256A54.0075B349.00 at patapsco.com>
MIME-version: 1.0
Content-type: text/plain; charset=us-ascii
Content-disposition: inline
X-Lotus-FromDomain: PATAPSCO
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Joe Pfaltzgraff at PATAPSCO
05/22/2001 05:25 PM
Tim,
you don't have "delete readonly = yes" in your smb.conf? if this is set to yes,
then users can delete read only files if they have write permission on the
directory.
--Joe
>>Hi,
>>New to the list, apologies if this has been adressed before.
>>
>>Win 2K Pro SP1, Samba 2.2.0, RedHat 7.0
>>
>>I asked this on the newsgroup and no one has responded, yet. Any ideas
>>on how to make this work?
>>
>>We have a Management share, mgt, that is only visible to management. All
>>members of group mgt have read access to the files. I also want to allow
>>those in that group to create directories beneath all existing
>>directories. But, I don't want to allow users to be able to change or
>>modify other users files.
>>
>>The share is configured with a create mask of 0744, and a directory mask
>>of 0775. @mgt is listed in the write list for the share.
>>
>>If the user's default group is mgt and he or she can read and write on
>>the mgt share fine. When he/she create a folder, or directory, on the
>>mgt share, it gets the group mgt, with rwxrwxr-x permissions (0775),
>>which is OK. When they create a file in the folder, it gets group mgt
>>with permissions rwxr--r-- (0744), again, this is OK. Another user in
>>the mgt group can open the file and read it, but they cannot open it,
>>edit it and save it, unless they save it as another file.
>>
>>The problem is, that same user, who can't EDIT the file from an
>>application, can re-name it AND delete it. So, if they want to EDIT the
>>file, they just open it, save it under another name, delete the original
>>and rename the new one back to the original. Now they have read/write
>>permission on the file.
>>
>>Is it possible to prevent this?
>>
>>Regards,
>>Tim
Return-Path: <u13471 at hs-harz.de>
Delivered-To: samba at lists.samba.org
Received: from steinadler.fh-harz.de (unknown [194.95.16.230]) by
lists.samba.org (Postfix) with ESMTP id AAEB34B71 for
<samba at lists.samba.org>; Tue, 22 May 2001 14:45:05 -0700 (PDT)
Received: from hs-harz.de ([194.95.18.55]) by steinadler.fh-harz.de
(Netscape Messaging Server 3.6) with ESMTP id AAA1BFDE; Tue, 22 May
2001 23:45:54 +0200
Message-ID: <3B0ADE36.C2AB32F4 at hs-harz.de>
Date: Tue, 22 May 2001 23:46:30 +0200
From: "Edgar Soldin" <u13471 at hs-harz.de>
Reply-To: edgar at soldin.de
Organization: Hochschule Harz
X-Mailer: Mozilla 4.73 [de] (Win98; U)
X-Accept-Language: de
MIME-Version: 1.0
To: Urban Widmark <urban at teststation.com>
Cc: samba at lists.samba.org
Subject: Re: no password option, adding -n while automounting, though
pass is defined [solved]
References: <Pine.LNX.4.30.0105222007040.22460-100000 at cola.teststation.c
om>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Thx very much....
I used autofs 3.1.3 and with 3.1.7 evrything works fine ;). I just had to
install it.
read ya in the list
peace Ed
--
public class WhoDidIt{ // A comment. I love comments
private static Person sender;
public static void main (String[] foo){
sender = new Student();
sender.setName({"Edgar", "Soldin"});
sender.setCourse("Computerscience for media and art");
Adress address=new Adress();
address.setStreet("Friedrichstr. 57-59 Wh 4.511");
address.setZip(38855);
address.setCity("Wernigerode");
adress.setCountry("Germany");
sender.setAdress(address);
sender.setMobilePhone("+49171-2782880");
sender.setWebSiteUrl(" http://www.soldin.de ");
sender.setEmail(" edgar at soldin.de ");
sender.setGender(true);
System.out.println(sender.toString());
}
}
Return-Path: <lists at conet.cz>
Delivered-To: samba at lists.samba.org
Received: from conetux.conet.cz (conetux.conet.cz [194.213.232.146]) by
lists.samba.org (Postfix) with ESMTP id 54F3A466A for
<samba at lists.samba.org>; Tue, 22 May 2001 14:56:33 -0700 (PDT)
Received: from liborek (liborek [192.168.1.130]) by conetux.conet.cz
(8.11.0/8.11.0) with SMTP id f4MKvRi00996 for <samba at lists.samba.org>;
Tue, 22 May 2001 22:57:27 +0200
Message-ID: <003201c0e30a$2ea88cb0$8201a8c0 at liborek>
From: =?iso-8859-2?Q?Libor_Van=ECk?= <lists at conet.cz>
To: <samba at lists.samba.org>
Subject: XFS ACL's
Date: Tue, 22 May 2001 23:57:17 +0200
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-2"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.00.2919.6700
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hello,
has anybody suceeded to run Samba 2.2.0 with XFS ACL's?
Thanks,
Libor
Return-Path: <Dave.Pinchin at cdhb.govt.nz>
Delivered-To: samba at lists.samba.org
Received: from dalwhinnie.chhlth.govt.nz (chlfw.chhlth.govt.nz
[203.163.70.2]) by lists.samba.org (Postfix) with ESMTP id A84D051A9
for <samba at lists.samba.org>; Tue, 22 May 2001 15:01:50 -0700 (PDT)
Received: from sweep.chhlth.govt.nz (sweep.chhlth.govt.nz
[159.117.16.14]) by dalwhinnie.chhlth.govt.nz (8.9.3/8.9.3) with ESMTP
id JAA16121 for <samba at lists.samba.org>; Wed, 23 May 2001 09:59:00
+1200
Received: from smtpgate.chhlth.govt.nz (unverified) by
sweep.chhlth.govt.nz (Content Technologies SMTPRS 4.1.2) with SMTP id
<B9f75100e53b17eb7bf at sweep.chhlth.govt.nz> for
<samba at lists.samba.org>; Wed, 23 May 2001 10:02:37 +1200
Received: from CHC-Message_Server by smtpgate.chhlth.govt.nz with
Novell_GroupWise; Wed, 23 May 2001 10:00:41 +1200
Message-Id: <sb0b8a49.041 at smtpgate.chhlth.govt.nz>
X-Mailer: Novell GroupWise 5.5.4
Date: Wed, 23 May 2001 10:00:35 +1200
From: "Dave Pinchin" <Dave.Pinchin at cdhb.govt.nz>
To: <samba at lists.samba.org>
Subject: HELP !!!!!
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
G'day,
I am new to list.
I'm having problems with samba and NT4. Samba is on HPUX 11. NT4 is running
only IP protocols.
The symptoms are that the NT browser will not (reliably) open the unix samba.
We have noticed an anomoly with NT and IP where NT will not recognise units on
it's domain if the subnet mask is not identical.
Can anybody suggest a reason for either / both of these effects and are they
related??????????
Thanks
Dave
** This email and attachments have been scanned for content and viruses
and is believed to be clean **
This email or attachments may contain confidential or legally
privileged information intended for the sole use of the addressee(s).
Any use, redistribution, disclosure, or reproduction of this message,
except as intended, is prohibited. If you received this email in error,
please notify the sender and remove all copies of the message,
including any attachments. Any views or opinions expressed in this
email (unless otherwise stated) may not represent those of Canterbury
District Health Board.
Return-Path: <einhverfr at hotmail.com>
Delivered-To: samba at lists.samba.org
Received: from hotmail.com (f272.law9.hotmail.com [64.4.8.147]) by
lists.samba.org (Postfix) with ESMTP id 8EFA8504B for
<samba at lists.samba.org>; Tue, 22 May 2001 15:29:54 -0700 (PDT)
Received: from mail pickup service by hotmail.com with Microsoft
SMTPSVC; Tue, 22 May 2001 15:30:44 -0700
Received: from 131.107.3.92 by lw9fd.law9.hotmail.msn.com with HTTP;
Tue, 22 May 2001 22:30:44 GMT
X-Originating-IP: [131.107.3.92]
From: "Christopher Travers" <einhverfr at hotmail.com>
To: Dave.Pinchin at cdhb.govt.nz, samba at lists.samba.org
Subject: Subnets and SMB was Re: HELP !!!!!
Date: Tue, 22 May 2001 15:30:44 -0700
Mime-Version: 1.0
Content-Type: text/plain; format=flowed
Message-ID: <F272Vn20lbhsKd6QR7j00005e5f at hotmail.com>
X-OriginalArrivalTime: 22 May 2001 22:30:44.0800 (UTC)
FILETIME=[D7539400:01C0E30E]
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi all;
Here is the situation relating to SMB and subnet masks.
NetBIOS over TCP (SMB, or NBT) can operate either with or without a
designated name server (i.e. WINS server). If a WINS server is present and
systems are directed to recognize it, then systems will go through the WINS
server for name resolution, and they will also register with the WINS
server.
Otherwise they rely on broadcasts for name resolution. A computer sends out
a broadcast packet which requests the identity of a computer of a given
name. If the subnet masks are not identical, then the broadcast addresses
are not identical, hence the machine does not recognize the broadcast
address as such. Note that in this case, \\ip.address.of.server should
bring up the server (i.e. \\10.0.1.10) while \\name will not.
If anyone knows more about this problem, feel free to add to this.
Thanks,
Chris Travers
>From: "Dave Pinchin" <Dave.Pinchin at cdhb.govt.nz>
>To: <samba at lists.samba.org>
>Subject: HELP !!!!!
>Date: Wed, 23 May 2001 10:00:35 +1200
>
>G'day,
>I am new to list.
>I'm having problems with samba and NT4. Samba is on HPUX 11. NT4 is running
>only IP protocols.
>The symptoms are that the NT browser will not (reliably) open the unix
>samba.
>
>We have noticed an anomoly with NT and IP where NT will not recognise units
>on
>it's domain if the subnet mask is not identical.
>
>Can anybody suggest a reason for either / both of these effects and are
>they
>related??????????
>
>Thanks
>Dave
>
>
>
>
>** This email and attachments have been scanned for content and viruses
>and is believed to be clean **
>
>This email or attachments may contain confidential or legally
>privileged information intended for the sole use of the addressee(s).
>Any use, redistribution, disclosure, or reproduction of this message,
>except as intended, is prohibited. If you received this email in error,
>please notify the sender and remove all copies of the message,
>including any attachments. Any views or opinions expressed in this
>email (unless otherwise stated) may not represent those of Canterbury
>District Health Board.
>--
>To unsubscribe from this list go to the following URL and read the
>instructions: http://lists.samba.org/mailman/listinfo/samba
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
Return-Path: <dwcjr at inethouston.net>
Delivered-To: samba at lists.samba.org
Received: from leviathan.inethouston.net (216-118-21-146.pdq.net
[216.118.21.146]) by lists.samba.org (Postfix) with ESMTP id F32BB4A61
for <samba at lists.samba.org>; Tue, 22 May 2001 15:44:44 -0700 (PDT)
Received: from dwcjr (DWCJR.inethouston.net [216.118.21.147]) by
leviathan.inethouston.net (Postfix) with ESMTP id 0C2F510F40F; Tue, 22
May 2001 17:45:39 -0500 (CDT)
Message-ID: <02d901c0e310$eb5a00e0$931576d8 at inethouston.net>
From: "David W. Chapman Jr." <dwcjr at inethouston.net>
To: "Christopher Travers" <einhverfr at hotmail.com>,
<Dave.Pinchin at cdhb.govt.nz>, <samba at lists.samba.org>
References: <F272Vn20lbhsKd6QR7j00005e5f at hotmail.com>
Subject: Re: Subnets and SMB was Re: HELP !!!!!
Date: Tue, 22 May 2001 17:45:37 -0500
MIME-Version: 1.0
Content-Type: text/plain; charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
X-Mailer: Microsoft Outlook Express 5.50.4522.1200
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
> >Can anybody suggest a reason for either / both of these effects and are
> >they
> >related??????????
All I have is to add that you cab bypass all computers being on one subnet
without a wins server is if you have a Cisco router and use an ip helper
address.
Return-Path: <robinsda at ohsu.edu>
Delivered-To: samba at lists.samba.org
Received: from nims.ohsu.edu (nims.ohsu.edu [137.53.2.68]) by
lists.samba.org (Postfix) with ESMTP id 4E59645A4 for
<samba at lists.samba.org>; Tue, 22 May 2001 16:05:14 -0700 (PDT)
Received: from tarkus [137.53.95.161] by nims.ohsu.edu with Novonyx SMTP
Server $Revision: 2.74 $; Tue, 22 May 2001 16:05:49 -0700 (PDT)
From: "David W. Robinson" <robinsda at ohsu.edu>
To: samba at lists.samba.org
Date: Tue, 22 May 2001 16:04:18 -0700
MIME-Version: 1.0
Content-type: text/plain; charset="us-ascii"
Content-transfer-encoding: 7bit
Subject: Re: Subnets and SMB was Re: HELP !!!!!
Reply-To: robinsda at ohsu.edu
Message-ID: <3B0A8E02.11619.8B6D6B at localhost>
Priority: normal
In-reply-to: <F272Vn20lbhsKd6QR7j00005e5f at hotmail.com>
X-mailer: Pegasus Mail for Win32 (v3.12c)
X-Converted-To-Plain-Text: from text/enriched by demime 0.98b
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi
I am new to samba, so please forgive any stupid comments I make here. I
too am having problems with subnets. Or at least I think that is the
problem.
I have two linux boxes running slackware 7.1 and samba 2.0.7. One of the
computers (linuxA) is on XXX.XXX.95.XXX and the other (linuxB) is on
XXX.XXX.96.XXX. I have a Win2000 Professional box on the 95 subnet that
can see the linuxA box and I can connect to it with no problems.
However I cannot see linuxB whether I type
net use j: \\linuxB\david
or
net use j:\\XXX.XXX.96.XXX\david
at the command prompt of my W2K workstation. Both attempts give me
System Error 53
The network path was not found.
(BTW I can telnet to linuxb using its IP so it is not a connection
problem)
Now, if I smbclient //XXX.XXX.96.XXX/david from linuxA I can connect no
problem, even though both are on different subnets. So there seems to
be something unique to W2K that is preventing me from connecting to the
samba server on a linux box on a different subnew.
There is probably an easy solution to this, but I am stumped at the
moment. Any help would be appreciated, but could I ask that you give
your comments in "idiot-proof" mode as I am new to this whole business.
Thanks ahead of time
******************************
[ Double-click this line for list subscription options ]
Hi all;
Here is the situation relating to SMB and subnet masks.
NetBIOS over TCP (SMB, or NBT) can operate either with or without a
designated name server (i.e. WINS server). If a WINS server is present
and
systems are directed to recognize it, then systems will go through the
WINS
server for name resolution, and they will also register with the WINS
server.
Otherwise they rely on broadcasts for name resolution. A computer sends
out a
broadcast packet which requests the identity of a computer of a given
name. If
the subnet masks are not identical, then the broadcast addresses are not
identical, hence the machine does not recognize the broadcast address as
such.
Note that in this case, \\ip.address.of.server should bring up the
server (i.e.
\\10.0.1.10) while \\name will not.
If anyone knows more about this problem, feel free to add to this.
Thanks,
Chris Travers
>From: "Dave Pinchin" <Dave.Pinchin at cdhb.govt.nz>
>To: <samba at lists.samba.org>
>Subject: HELP !!!!!
>Date: Wed, 23 May 2001 10:00:35 +1200
>
>G'day,
>I am new to list.
>I'm having problems with samba and NT4. Samba is on HPUX 11. NT4 is
running
>only IP protocols. The symptoms are that the NT browser will not
(reliably)
>open the unix samba.
>
>We have noticed an anomoly with NT and IP where NT will not recognise
units on
>it's domain if the subnet mask is not identical.
>
>Can anybody suggest a reason for either / both of these effects and are
>they
>related??????????
>
>Thanks
>Dave
>
>
>
>
>** This email and attachments have been scanned for content and viruses
>and is believed to be clean **
>
>This email or attachments may contain confidential or legally
>privileged information intended for the sole use of the addressee(s).
>Any use, redistribution, disclosure, or reproduction of this message,
>except as intended, is prohibited. If you received this email in error,
>please notify the sender and remove all copies of the message,
>including any attachments. Any views or opinions expressed in this
>email (unless otherwise stated) may not represent those of Canterbury
>District Health Board.
>--
>To unsubscribe from this list go to the following URL and read the
>instructions: http://lists.samba.org/mailman/listinfo/samba
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
------------------------------ David W. Robinson, Ph.D. Research
Assistant Professor Physiology and Pharmacology, L334 Oregon Health
Sciences University 3181 SW Sam Jackson Park
Road Portland OR 97201
Tel 503-494-7361 Fax 503-494-4352
robinsda at ohsu.edu ------------------------------
Return-Path: <einhverfr at hotmail.com>
Delivered-To: samba at lists.samba.org
Received: from hotmail.com (f194.law9.hotmail.com [64.4.9.194]) by
lists.samba.org (Postfix) with ESMTP id D124649B0 for
<samba at lists.samba.org>; Tue, 22 May 2001 16:10:19 -0700 (PDT)
Received: from mail pickup service by hotmail.com with Microsoft
SMTPSVC; Tue, 22 May 2001 16:11:09 -0700
Received: from 131.107.3.79 by lw9fd.law9.hotmail.msn.com with HTTP;
Tue, 22 May 2001 23:11:09 GMT
X-Originating-IP: [131.107.3.79]
From: "Christopher Travers" <einhverfr at hotmail.com>
To: dwcjr at inethouston.net, Dave.Pinchin at cdhb.govt.nz,
samba at lists.samba.org
Subject: Re: Subnets and SMB was Re: HELP !!!!!
Date: Tue, 22 May 2001 16:11:09 -0700
Mime-Version: 1.0
Content-Type: text/plain; format=flowed
Message-ID: <F194dlGJZNuIkdg0MZM00007621 at hotmail.com>
X-OriginalArrivalTime: 22 May 2001 23:11:09.0825 (UTC)
FILETIME=[7CC10710:01C0E314]
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
I don't recommend this-- too much broadcast traffic :(
In that case, why not use SAMBA as your WINS server?
Good info though.
>From: "David W. Chapman Jr." <dwcjr at inethouston.net>
>To: "Christopher Travers" <einhverfr at hotmail.com>,
><Dave.Pinchin at cdhb.govt.nz>, <samba at lists.samba.org>
>Subject: Re: Subnets and SMB was Re: HELP !!!!!
>Date: Tue, 22 May 2001 17:45:37 -0500
>
> > >Can anybody suggest a reason for either / both of these effects and are
> > >they
> > >related??????????
>
>
>All I have is to add that you cab bypass all computers being on one subnet
>without a wins server is if you have a Cisco router and use an ip helper
>address.
>
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
Return-Path: <mrz.pct at home.com>
Delivered-To: samba at lists.samba.org
Received: from femail3.rdc1.on.home.com (femail3.rdc1.on.home.com
[24.2.9.90]) by lists.samba.org (Postfix) with ESMTP id CBA2F4262 for
<samba at lists.samba.org>; Tue, 22 May 2001 18:40:22 -0700 (PDT)
Received: from mustang.pct.com ([24.66.109.21]) by
femail3.rdc1.on.home.com (InterMail vM.4.01.03.20
201-229-121-120-20010223) with ESMTP id
<20010523014111.NJH29518.femail3.rdc1.on.home.com at mustang.pct.com> for
<samba at lists.samba.org>; Tue, 22 May 2001 18:41:11 -0700
From: MRZ <mrz.pct at home.com>
To: samba at lists.samba.org
Subject: Binding Windows to TCP/IP - Alternative?
X-Mailer: Cronos II 0.2.2 (gnome-libs 1.2.11; Linux 2.4.2; i686)
MIME-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Message-Id: <20010523014111.NJH29518.femail3.rdc1.on.home.com at mustang.pc
t.com>
Date: Tue, 22 May 2001 18:41:11 -0700
Sender: samba-admin at lists.samba.org
Errors-To: samba-admin at lists.samba.org
X-BeenThere: samba at lists.samba.org
X-Mailman-Version: 2.0beta6
Precedence: bulk
List-Help: <mailto:samba-request at lists.samba.org?subject=help>
List-Post: <mailto:samba at lists.samba.org>
List-Subscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=subscribe>
List-Id: General questions regarding Samba <samba.lists.samba.org>
List-Unsubscribe: <http://lists.samba.org/mailman/listinfo/samba>, <mailto:samba-request at lists.samba.org?subject=unsubscribe>
List-Archive: http://lists.samba.org/pipermail/samba/
Hi folks.
Couldn't find this when I searched the archives, and didn't know where this should have been sent, so here goes.
More information about the samba
mailing list