[Samba] RE: Can't find samba server after new NIC installed

[Christoph]

Hi,
is it possible you have a local firewall installed which blocks access
over eth1? If this is a recent linux-distro (suse/redhat) this is verry
likely to happen.
Christoph


Ow Mun Heng wrote:

> One More thing, after tinkering with it more, I found that Port 139 is
> refusing connection. I've got another Linux box, smbclient to the problem
> box gave that message.
> 
> Once I removed the NIC, restart samba, then all is better.
> 
> Can anyone help me? I would like to add in another NIC for my backup
> solution.
> 
> TYhanks.
> 
> Cheers,
> Mun Heng, Ow
> H/M Engineering
> Western Digital M'sia 
> DID : 03-7870 5168
> 
> 
> -----Original Message-----
> From: Ow Mun Heng 
> Sent: Tuesday, August 12, 2003 6:35 PM
> To: 'samba at lists.samba.org'
> Subject: Can't find samba server after new NIC installed
> 
> 
> Hi All,
> 
> 	Perhaps you guys can help me shed some light on this 'problem' I'm
> facing.
> 
> I recently added another NIC to my samba server. eth0(10.0.0.251) and
> eth1(valid dhcp address)
> ETH0 was added to connect to another PC that acts as the backup server.
> (dedicated connection)
> 
> Now, Samba won't come back up.. I can still ssh into the server and all.
> 
> Any ideas? I know that the wins needs up to 45mins for the announcement to
> work.. but even using ip address on windows (as in
> start->run->\\eth1-ip-add) does not work. (windows gives the error - No
> Service is operating at the destination network endpoint on the remote
> system)
> 
> I've added 
> interfaces = eth1
> wins server = ipaddress of windows network wins server
> 
> 2003/08/12 18:05:30, 0]
> nmbd/nmbd_browsesync.c:find_domain_master_name_query_fail(358)
>   find_domain_master_name_query_fail:
>   Unable to find the Domain Master Browser name MY<1b> for the workgroup MY.
>   Unable to sync browse lists in this workgroup.
> 
> After putting log level = 10, I find this
> 
> 
> [2003/08/12 18:18:05, 4] nmbd/nmbd_workgroupdb.c:dump_workgroups(289)
>   dump_workgroups()
>    dump workgroup on subnet  UNICAST_SUBNET: netmask=  xxx.yyy.zzz.aaa:
>         MY(1) current master browser = UNKNOWN
>                 eth1-name 40019a03 (server comment)
> 
> Usually, (before this issue), samba is able to get the current master
> browser...(and before, I never even put in the wins server ipaddress and it
> works!)
> 
> HELP me please..
> 
> Cheers,
> Mun Heng, Ow
> H/M Engineering
> Western Digital M'sia 
> DID : 03-7870 5168