[Samba] Page printing problem

[Joel Hammer]

Is this the HP laserjet 4Plus? It works perfectly according to the linux
printing page:
http://www.linuxprinting.org/show_printer.cgi?recnum=75104

Maybe you are sending the output to the wrong queue. If you install the HP
drivers on the windows box, you might try sending the output to a raw queue
on the samba server. I suspect trying to send them to the same queue as your
linux clients may be the problem.

BTW, I have solved all my printer problems by just setting up a working
queue on the linux server, which takes postscript files, and then sending
everything to the samba server queue in postscript format. HP laserjet III
plus works fine for my windows clients.

Alternatively, there may be configuration parameters you can set on the
windows driver side which might solve the problem.

Joel

On Mon, Sep 09, 2002 at 05:07:28PM -0400, Stephen West-Fisher wrote:
> I'm having a problem printing from a W2K client to an HP4 Plus 
> printer connected to a FreeBSD 4.5 server.
> 
> Using lpd from either the server or other clients on the network 
> prints correctly. The printer also works fine when connected directly 
> to the W2K client.
> 
> Anything I print from the W2K client with more than one page, prints 
> all pages on one piece of paper. Makes it a little hard to read. Any 
> ideas?
> -- 
> Stephen West-Fisher
> steve at rehabdocuservices.com
> Rehabilitation Documentation Services
> 727.895.2909
> 
> 
> 
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  http://lists.samba.org/mailman/listinfo/samba