[Samba] IP address change

[Tombs, Donna]

A while back samba was installed on a machine with IP address 10.1.0.19,
default router 10.1.0.1. The IP address was recently changed to 10.2.0.57,
default router 10.2.0.1. The share used to be available across our network
as specified by hosts allow. However, since the IP Address change ONLY 10.2
machines can see the share. It is no longer available to the whole network.
The server itself can be seen without any difficulty from the whole network,
either using the new IP address or the hostname. It can also be seen thru NT
as a sharable machine but when you try to connect to it from anywhere other
than 10.2 you get a 'Network path was not found' message.
Does samba support changing the IP address in this way?

> Donna 
> 
> Donna Tombs
> IT Manager OST
> Information Technology Section
> East Renfrewshire Council
> Phone: 0141 577 3456
> Fax: 0141 577 3421
> mailto:donna.tombs at eastrenfrewshire.gov.uk
> 
> 
> 
> 


**********************************************************************
This e-mail and any files transmitted with it are not necessarily the view of East Renfrewshire Council. It is intended only for the person or entity named above. If you have received this e-mail in error please notify the author by replying to this e-mail and then erasing the e-mail from your system. If you are not the intended recipient, you are hereby notified that any use, review, dissemination, distribution or copying of the e-mail is strictly prohibited.
East Renfrewshire Council may monitor outgoing and incoming e-mails.
This footnote also confirms that this e-mail message has been swept 
 for the presence of computer viruses.
**********************************************************************