[Samba] Problems with Word 200 and Samba 2.2.6

Marian Mlcoch, Ing mm at tsmp.sk
Thu Nov 21 06:48:01 GMT 2002


Hi
i read your problem and i suggest you to verify user , owner and group chmod
on directory with docs and on user that modified this word file.
When you create new file word saves ~.tmp on your local harddisk temp
directory and saves it to share with save command and new name.
Afther when you edit then ~... file is created on share but samba can
vetoing ~ char in name by settings veto or bad codepage.
Check your vetofiles settings on samba.
Bye.

----- Original Message -----
From: "John H Terpstra" <jht at samba.org>
To: "Ed Stoner" <ed at whsd.k12.pa.us>
Cc: <samba at samba.org>
Sent: Wednesday, November 20, 2002 3:05 AM
Subject: Re: [Samba] Problems with Word 200 and Samba 2.2.6


> On Wed, 6 Nov 2002, Ed Stoner wrote:
>
> > I'm hoping someone has some insight into a problem I'm currenty having,
> > which is:
> >
> > No one is able to edit (in place) documents with Word 2000 on a samba
> > (2.2.6) disk share.  A user can open word and save a document to the
> > share, but when they go to edit the document Word says "Word cannot
> > complete the save due to a file permission error".  From Microsoft KB
> > Q211632 it appears that Word 2000 performs the following steps to Save
an
> > Edited File:
> >
> > 1.) Create a temp file (Create ~wrdxxxx.tmp)
> > 2.) Write temp file (Save example data to ~wrdxxxx.tmp)
> > 3.) Delete original file (Delete EXAMPLE.DOC)
> > 4.) Move temp to target name (Move ~wrdxxxx.tmp to EXAMPLE.DOC)
> >
> > >From examining the samba debug log (attached) it does appear that this
> > happens.  It also appears that somewhere in steps 1 and 2 above Word
sends
> > a request to turn off the read,write,and execute bits for the owner of
the
> > file.  When you look at this filesystem after the attempted save the
> > original file does indeed have these bits cleared (i.e. the user has no
> > read,write,or execute permissions on the file), and that I think is why
> > the error is being generated.
>
> What update level (service pack) have you installed on your Word 2000
> system? Please tell us what is the exact version information from clicking
> on Help/About in Word.
>
> Please check that your Word is up to date with all service updates from
> the MS Web site.
>
> Also, what is the client OS and it's update level?
>
> Also, please send your smb.conf to jht at samba.org and I'll check it over.
>
> - John T.
>
> > I've tried setting the 'create mask', 'security mask', 'force create
> > mode', and 'force security mode' parameters to no avail (I assumed that
> > setting 'force security mode' to 0700 would prevent a file from getting
> > rwx removed from the owner).  I've also tried turning 'nt acl support'
on
> > and off.  I've attached my config file also.
> >
> > My questions are:
> > 1.) has anyone else seen this error?
> > 2.) if so is there a fix?
> > 3.) why does smbd/posix_acls.c:set_nt_acl allow chmod to 000?
> >
> > P.S.
> > This does not happen with the same client config connecting to either an
> > NT Share or a 2000 Share, in case anyone is curious (i.e. I don't think
it
> > is a client thing)
> >
> > thanks
> >
> > -----------------
> > Ed Stoner
> > Network Administrator
> > Woodland Hills School District
> > (412) 731-1300 x0109
> >
>
> --
> John H Terpstra
> Email: jht at samba.org
>




More information about the samba mailing list